MIRO changes

Dear Friends,
on a PO there are two materials A and B
both received at same time, MIGO done correctly
Excise entries also passed and now when doing MIRO i want to simulate before posting.
Before posting i need to calculate in order to double check, can't the system show only four line items -
total value of excise in one line item
total value of excise edu.cess  in second line item
total value of excise higher edu.cess  in third line item
total value of VAT in fourth line item in simulation mode otself.
Presently it is showing seperate values for excise, Edu.cess,he Cess and VAT figure, so for 2 materials it forms 8 line items. I wish to see only 4 line items. so that matching the vlaues with vendor invoice saves time.
Thanks
Sanjay

Hi,
The MIRO screen will allow to post for idivual items and show the simulation screen for individual items as the MIRO posts to GL accounts on its individul item bases.It will not poat as a whole.
This is the std behaviour of miro for accountability purpose.
Regards,

Similar Messages

  • MIRO - Change Withholding tax data at save dinamically

    Hi dear all ,
    We will have an Z table to be used as parameter to input an WHT code at MIRO automaticaly.
    Some vendors and services must be taxed by certain codes. So we need change the currently code at MIRO WHT screen  to new one.
    Could I do this thru user exit at MIRO without end user put their hands ? could I change bases too ?
    I found user exit 'EXIT_SAPLMR1M_004' but I'm sure if is possible do it !
    best regards,
    Ale

    Try using this BADI along with ABAP person.
    MRM_WT_SPLIT_UPDATE
    You can write your own code here and sent default whereever you do not wish.
    Hemant

  • BAPI or USER EXIT for MIRO: Change PO reference amount (on-line)

    Hi, I need to find a BAPI or USER EXIT for TX MIRO to change/modify the PO reference amount for the selected positions (using the given checkbox) just after selecting them (when pressing ENTER). Any ideas? Thanks.

    Hello Suman,
    Please follow this steps to get the list of Userexits for the TCODE MIRO read there short description to get the appropriate EXIT.
    Steps.
    1. Goto the Tcode
    2. System-> Status.
    3. Copy the program name, find the package for the program.
    4. Go to SMOD (tccode)  press F4 -> Click on "Information System" Push Button->
       Enter the Package name-> and press the enter button.
    5. Now you get the list of Userexits. Need to select one by looking into its short    description.
    Hope this solves your issue,
    Cheers,
    Suvendu

  • MIRO: Change the sequence of columns permanent

    Hi!
    It's easy to change the column sequence in miro with the mouse but ...
    Is it possible to modify the sequence of columns in a screen variant (MIRO) permanently?
    We're working with 4.6c.
    Thanks in advance!
    Best regards,
    Ingo

    Hi Dominic!
    Thanks ... I know OLMRLIST already.
    I don't find there something to change the sequence permantly.
    There's the option "Take over column sequence" and it's marked.
    ...I want to unmark the option but i can't change it (i can't enter it... it's grey).
    Any ideas?
    Best regards,
    Ingo

  • MIRO: Changes in tax calculation

    Dear Experts,
    My requirement is regarding tax calculations (Basic Excise Duty, Edu. cess, Higher Edu. Cess) in MIRO transaction. We calculate all these duties in this transaction with a taxed code which is based on fixed percentages for combination of tax code and condition record. We manually capture and post all these duties in J1IEX transaction based on the given percentages like 12% , 2%, 1%. The requirement is like, in some cases the user will have to capture and post duties in J1IEX transaction not based on the  fixed percentages 12%,2%,1%. These duties could be any figures as provided by the dealer/supplier. As these duties are not based on the fixed percentages, we cannot define a combination of tax code and condition record to be used in MIRO transaction. In this case, the tax/duty calculated in MIRO transaction should get matched with figures already posted in J1IEX transaction. Is there any configuration which could do so.
    Someone please shade light on this.
    Thanks & Regards,
    Aniruddha Mahalle

    Dear Anirudha,
    If the user has entered the excise values manually means ZERO tax code is used in PO, then while entering the details in J1IEX the user has to check the MRP indicator in miscellaneous tab. When the MRP indicator is ticked in J1IEX then when the user enters MIRO on checking the calculate tax code and using the zero tax code(Tax code which is used in PO) the tax values are automatically calculated.
    Many threads are already available in SCN.
    Role of MRP Indicator regarding Excise Part in GR or in J1IEX
    Excise Duty Pass on Scenario
    Regards,
    Bhanu

  • Vendormaster data changes not updated in MM scheduling agreement

    Hi,
    Can anbody tell me how to update the vendor master data changes for the exsting purchasing documents.

    My dear friend ,
    Solution 1:
    In SAP ,it is not possible. Please shortclose the p.o.and create a new P.o to reflect the  payment terms,
    Solution 2:
    Normally in all industries they will send a official letter stating the terms of payment has been amended. You will get the payment as agreed. While posting the MIRO change the payment terms and pay the vendor.
    I think this the solution you have to choose any one no other go
    G.Ganesh Kumar

  • How to post MIRO for services .?

    Dear All ,
                                               User is doing an entry of MIRO here the total amount for service charges are 4,500 INR & serv. tax on it is 600INR ( For ex. ) now user wants that in mormal IV the amount is having the total of serv. charges + taxes but in this case user do not want to take the credit of serv. tax hence he wants that this sserv. tax should be posted to other liability G.L instead of Serv. tax credit G.L , can u pl guide how to post such MIRO .?
    Rgds .
    SAP2008
    Edited by: sap2008 on Jan 8, 2009 10:20 AM

    Hi
    Create MIRO, change the tax code to V0- No Tax in the header level as well as item level, so that you can able to post amount without service tax.
    Regards
    Prasanna R

  • Any Vendor in MIRO???

    Hello friends,
    In my testing I came to know that the system is allowing any vendor as different payee in MIRO screen irrespective of PO vendor and even i am able to post the document without any error or block.
    I don't have any partner functionality.
    Please can any one of you tell me how to control this?
    Thank you,
    SUbbu.

    Hi
    If  you dont want a diferemt invoicing party ibn the invoice in MIRO , change the attributes of the system message
    M8 220 as error message , this is at client level if you want it at company code level use  Validation rules in FI.
    Thanks
    Raju

  • MIRO cuurency for PO Exchange Rate Fixed..

    Hi,
    I am fixing the exchange rate at the Time of PO, GR Done based on Exchange rate (PO) ,
    M requirment is  :While doing the MIRO , System should capture Exchange Rate from PO , But Currency as per Company code currency. ( At present system is not accepting company code currency where PO Exchange rate tick maintained )
    How we can achieve this , Any Exits avialable to change the currency.

    HI
    while doing MIRO system will pick up vendor currency
    which currency your are using in PO.it will vendor currency
    if in MIRO you want company code currency then while doing MIRO change it
    Regards
    Kailas Ugale

  • Wrong excise duty during miro

    sap gurus,
    our scenario is we capture excise invoice then migo(GR) then post excise invoice and then after that miro.
    In many cases we need to change excise duty in j1iex and then we post excise through j1iex. The changes that we do in excise duty should be reflected in miro coz in our case we do miro after j1iex(post). In few cases system is not reflecting correct excise invoice in miro. during miro system is picking excise as is in PO and not the one changed in ji1ex.
    And yes we always do miro after excise post(j1iex). Plz tell me the solution.

    In Miro,tax amounts will be calculated according to tax code so if you do changes in J1IEX then it wont' be reflected in invoice.
    For dealer vendor you need to tick MRP indicator in miscellaneous tab of excise invoice(J1IEX),enter excise base value,
    excise duties for capturing,refer it in migo & later post excise invoice.
    In MIRO change base amount without excise duties,select ed tax code,now you can see orginal excise duties captured in j1iex will be reflected in MIRO.
    Refer note 1104456 - Use of MRP indicator for capturing excise duties from dealer

  • Regarding GL item tab in MIRO transaction

    Hi
    I am working on MIRO transaction.
    In GL Item tab, if we enter Account number it has to be
    checked with ZMMTABLE and display error if not available.
    In Ztable we have company code, account number(SAKNR) and ZFLG as key.
    need to fetch by key.
    How to fetch company code and account number from screen?
    I am using BADI INVOICE_UPDATE, CHANGE_AT_SAVE method.
    WHen i clic save button in MIRO transaction, the BADI is not triggered.
    I have implementation active and made break point too.
    I tried displaying invoice document in MIRO , changed the amount and clicked save button. but BADI is not triggered
    Can you tell me how to debug bad? i put break point in BADI method and opened session then execute MIRO.
    Pls advice how to go with.
    Regards
    Chandra
    Edited by: princeck on Sep 20, 2011 3:14 PM
    Edited by: princeck on Sep 20, 2011 4:11 PM

    Hi
    I want to access GL item tab account number from MIRO transaction to BADIINVOICE_BADI Method CHANGE_AT_SAVE. I entered the account number in GL account tnumber tab. but parameter TI_RBCO_NEW-BUKRS & TI_RBCO_OLD-BUKRS values are empty inside BADI method.
    Can you suggest me how to find this.
    Regards
    Chandra
    Edited by: princeck on Oct 3, 2011 2:32 PM

  • BAPI to change invoice document status from deleted to something else

    Hi experts,
    When the document is deleted thorugh MR8M, the invoice status(rbstat) in rbkp table of the invoice doument(MIRO) change to 2 i.e. deleted.
    I want to use the same data for parking again by using standard BAPI_INCOMINGINVOICE_GETDETAIL. But v=before that i have to change the status of the document from deleted to something else
    Is there any BAPI exist by which i can change the status (rbstat) from deleted to parking or somthing else. i am trying to change it thorugh BAPI_INCOMINGINVOICE_CHANGE , but its not working.
    Please help me to find such BAPI
    regards
    Mudit

    Hi Lan,
    you can print with SDK using following code :
    ReportLayoutsService oReportLayoutService = SBO_Company.GetCompanyService().GetBusinessService(ServiceTypes.ReportLayoutsService);
    ReportLayoutPrintParams oReporPrintParams = oReportLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiReportLayoutPrintParams);
    ReportParams oReportParam = oReportLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiReportParams);
    oReportParam.ReportCode = "QUT1";
    DefaultReportParams oReportParaDefault  = oReportLayoutService.GetDefaultReport(oReportParam);
    oReporPrintParams.LayoutCode = oReportParaDefault.LayoutCode;
    oReporPrintParams.DocEntry = 337;
    oReportLayoutService.Print(oReporPrintParams);
    I tried to print an unprinted document but it didn't change the printed flag at all ( in / active BP ). So unfortunately it doesn't work.
    regards,
    Maik

  • -ve price change in Moving average Price of Material in Material Master.

    Dear All,
    Kindly guide on below issue.
    We have a Material e.g A which stock was available in System let us say 10 qty & the Price per unit was Rs.10. But in last August some users chagned the price to Rs.5 because of whcih the Valuation in previous period has become negative.
    Now I have to rectify this. Now please tell me how can I do so.
    Also Note: there are sevral other Movements have happened since then i.e. GR, IR, Consumption for Production etc.
    This is very important.
    Regards,

    For negative MAP , there are steps which are given in SAP note 356757. Follow this steps to overcome this issue.
    The notes goes as...
    Summary
    Symptom
    When you try to post an invoice for the purchase order, the system generates error message M8783: 'Moving average price for material & & & is negative'.
    Additional key words
    MRHR, MR1M, MIRO, MMVAL, M8783
    Cause and prerequisites
    You posted a valuated goods receipt for a purchasing document for a material with moving average price control.When the invoice was posted (invoice item with price variance for goods receipt), the system generates error message M8783: 'Moving average price for material & & & is negative'.
    Between the posting of the original goods receipt and the entry of the invoice, the system already posted additional valuation-relevant transactions/events (goods movements, invoices and so on, can be displayed with Transaction MR51).
    The invoice verification tries (for stock coverage) to credit/subsequently debit the difference between the value of goods received and invoice item value for the stock.However, the material total value must not become negative by this stock posting.
    Solution
    Before you post the invoice, you must first increase the stock value.
    The amount by which the stock value must be increased at least can be calculated from the following values:
    1. Transaction MM03, accounting view material master, field 'Total value' (MBEW-SALK3)
    2. Invoice item value according to invoice
    3. In the invoice verification (Transaction MR01, MR1M, MIRO), change the invoice item amount to a value which is high enough and simulate the invoice to receive the value which would be posted for this item to the GR/IR account.
    In the invoice verification, the value (3) minus (2) is posted to stock. It must be larger than (1).Post a subsequent debit with the amount (3) + (1) - (2) for the affected material/plant (Transaction MR22).
    You can post the invoice afterwards.

  • PO and MIRO

    Gurus
    I made a PO for Imported Material from import vendor wid order currency US dollar of amonut 200 dollars and also added bank charges in other currency as its vendor is Local in PKR of amount 2000 rupees.
    now while making invoice for bank in local currency system brings bank amount 1999.80 rupees instead of 2000 rupees,
    why ?
    i dunt want tis behavior. i want its upper rounding off , if its the matter of rounding off after conversion of exchage rate
    Please Guide
    Thanks

    Hi
    This is std SAP ... your PKR gets converted to USD .. at exchange rate .. again USD gets converted to PKR .... there is rounding off happening in internal calculation ...... so this problem
    Best is ...during MIRO change the amount to 2000 .... This is what we have been doing ....
    May be some one suggests something special .... lets wait

  • Posting of MIRO transaction with other document type

    Hi Every Body,
    We want to make MIRO with other document type for some particular transaction , not with RE , we have defined other document type VR , also number range but how to link it in MM part because MM number range same for RE and having provision for  only one number range . Can we define MM no. range also separate & other wise with same MM no. how we can linl VR doc type no. range..
    Please give some idea
    Thanks,
    Dharmveer

    Hi,
    Thanks for reply
    We mapped the system as suggested by you , but we get posting termination most of time while doing MIRO & changing document type VR in deatil tab in header part.
    Please suggest me, hoe we can create transaction variant of MIRO then we can process such activites apart from standard.
    Thanks,
    Dharmveer

Maybe you are looking for

  • Can any other phone be used with a 6210 car kit?

    Hi, I have just purchased a car and it has a nokia 6210 hands free kit fited into the car. It works as I have hecked it with a friends mobile phone, however, will this kit work with any other nokia mobile phones? Any help would be appreciated. Thanks

  • Pass Dynamic Parameter to Agent

    Hi All, I am trying to send the report/analyses by mail to my leaders in Oracle Business Intelligence 11.1.1.5.0. My report has Dashboard prompt for Region like "North" , "South", "East" and "West". I am able to send the report for all region but not

  • Freight accrual - Stock Transport Order - Moving Average Price.

    Hi all    I am trying to add delivery costs (freight accrual) to Stock transport order, where the material in receiving plant is valuated at Moving Average Price (MAP). So, the freight cost is getting rolled over into the material price in the recevi

  • Canon 1D MK2 - Every other photo is black? HELP

    I recently purchased a Canon 1D Mark II. I had it serviced, picking it up last Monday. Nothing was wrong with the camera. A coworker asked to take photos in the office. He stepped away, returning a few minutes later, asking me if the camera's taking

  • COPA Datasource Migration from 3.x to BI 7.0

    Hi Experts, I am facing an issue to restore the migrated COPA datasource from 3.5 to BI 7.0. I am doing this migration as mentioned below 1.selected the 3.x datasource and in context menu used migrate 2.used option "with export" 3_.No transport reque