Mirror Image and Dust

I have a digital conversion that was copied backward and inside out (don't ask!)
I know I can reverse the front to back in Premiere, but how can I 'flip' the mirror image frames?
I have been to other video editing forums and get info that it can be done using 'pan/crop tools' but no explanation as to how (or even what that is). I don't know if that exists in APE as it does in Sony Vegas. Any suggestions?
Also, the film was not cleaned before it was run (backward) for recording, so it is full of dust and debris. Is there a function to get this stuff out, like there would be in Photoshop for stills?
Thanks
Doug

The Effect>Horizontal Flip should take care of the reverse view of the Frame.
As for the dust, the best course of action is to clean the film, prior to the telecining operation, and is a feature of most professional telecine houses.
Otherwise, one has only two choices, and either will involve a lot of hand-work. One could Export/Share as a Film Strip (think that this option was discontinued in later PrE versions), then Import the individual Frames of the Film Strip into PS for work, Frame by Frame, in PS. This would be Rotoscoping. The other involves doing the same, without the limitation of the Film Strip format, in Adobe After Effects and its Clone Tool. Either is a Frame by Frame operation and requires a lot of time and work.
Cleaning and redoing the telecine would be my choice. Also, this should eliminate the need for the Flipping, if done right.
Good luck,
Hunt

Similar Messages

  • No sound from my apple tv what so ever. my iphone 4s connects with mirror image and music but there is no sound.

    My apple 3rd generation is plugged into my philips tv through a DVI to HDMI lead cable and the power cord to the mains. everything here is fine but then the optical cable has a optical to stereo jack converter on, which is then connected to a 3.5mm jack sokect to 2 phone RCA headphone splitter cable [just like the red, white and yelllow famously used for sound, image etc] regardless of all these efforts i still get no sound. Also when i play music for example i can see that it is being played with a little rectangal box on the bottom left hand side of the tv scree but there is no sound. I even tried to vconnct the jack cable converter into my speakers but no used still no sound.

    okay to help understand a bit clearer -
    i have this connected at the back of the black apple tv box for sound
    which is then connected to
    which is then connected to
    which then connects at the back of my tv.

  • How to stop printing mirror image in word 2008

    Hello,
    Since yesterday, I have had occasional problems: documents are printed with the text in mirror image and last night a word document saved as a pdf file also had the text reversed. When I saved the same document as pdf a second time, it was fine.
    I can't find an answer in the usergroups and it does not happen every time.
    Apple tech support said that they had never heard of this problem and it had something to do with a "mirror image" command in word, but I can't find any information about such a command in word 2008.
    thank you,
    Cynthia

    the Preview.app has an option to Flip Horizontal.

  • How do I print a mirror image

    How do I print a mirror image of a document or photo?

    Use Preview to make the mirror image and pring from Preview
    LN

  • How can I turn off the mirroring image function at facetime

    Hi there, I found that the FaceTime is showing a mirrored image and there is no option to turn off in there. Is there any way that I can turn off this function.
    FYI, I have to connect a new webcam as a front camera on my Macbook Air and show the whiteboard writing via FaceTime but this combination shows a inverted writing..
    DJ

    It's not something that you turn off, there isn't a setting for it, you will just have to try to avoid touching the top part of the screen. Apart from that you can try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • Multi monitor with splitter only gives mirror image

    i have a mac intel based 10.5.6 (i know i need an update) i ordered a minidvi to vga adapter but i thought that i could use a splitter to move my mouse to the two other monitors but it only gives me a mirror image and i dont know if i could change that. Any ideas?

    The adapter worked but the refresh rate is very fragmented and i cant get a clear movement of pictures and it is also slowing my other monitors down. my guess is that it requires additional software and a load of adapters which i think is messed up. I have 10.5.8 now and do not see much a difference. the first monitor that attached was throught the mini dvi on that back with a vga adapter and it works like a charm on 1920x1080. is there any kinf of mini dvi "hub" or expander to give me one extra port?

  • Hp office jet 6500 how to print mirror images

    How do I create a mirror image for text  to print on a tshirt transfer paper?  I can do it with my old printer but I can't find the area were I would click Mirror Image for this printer. 

    Hi @adamjoshme ,
    I understand that you want to know how to print a mirror image. I would like to help you out with this issue today.
    This feature might not be available with this model. You would have to check the printer preferences, in the Advanced section for Mirror Image and turn it on from there if it is available. I checked the manual and it didn't show this feature.
    If you don't have that option in the driver then use Paint, Under Rotate select Rotate 180 degree's and then under Rotate select flip horizontally.
    Hope this helps.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Office jet 5780 is printing mirror image

    I have a oj 5780 that is printing mirror image and really small. I have change all the settings and it is still doing this. Has anyone else had this problem and do you know what it might be? Thanks

    Hello,
    Please click HERE to access the steps that should resolve the issue .

  • I have the officejet 7500 A and there is no mirror image option...how do I print with mirror image

    Officejet7500A how do I print mirror image?

    Yes using paint works, however it resizes once printed. I have been trying to reverse image print and i think its absolutley insane HP took away this option. Why have the image print for tshirt and not keep reverse. If i open my word banner project in paint, when i print it doesnt stay true to its size, then i have to photocopy and photocopy until i get the right size. Pain in the a@# if you ask me...lol. PLease bring back the option with a driver update! PLease! For pete's sake a ricoh printer at work has it, why not HP home where it will actually be used.. 

  • How to I get a mirror image of a 3D extrude and Bevel image?

    I created a ribbon using the extrude and bevel effect and then mapping it with a custom symbol. I copied the image and then tried to get a matching image on the flipside to mirror it but cannot seem to figure it out. Is there a way to somehow flip the orientation of the image? I tried using transform and then reflect and it does not do anything. I tried to do it manually in mapping and flipping the box upside down and in reverse but it just doesn't seem result in the a reflective image. Any ideas on this? Attached are the two images I am trying to get to reflect each other. Thanks

    It works so it is you who have perhaps a blind spot you have to select reflect X and move the object horizontally just look at my settings and the video.
    If you do not see a difference than what I have done and what Scott has suggested than what you actually did then he problem is something entirely different.
    Here is a video you can go wrong if you follow it.
    http://www.wadezimmerman.com/videos/TransformReflex.mov

  • I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

    I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    If you have two displays attached, then the function to change from mirrored to extended Desktop will appear in System Prefs/Displays.

  • Apple Watch does it make provisions for left-handers? either a mirror image version, or the ability to rotate the display 180º allowing it to be worn on the right wrist and controlled with the left hand?

    Does the apple Watch accommodate left-handed people? is there a mirror image option, or can the display be rotated 180º, allowing the watch to be worn on the right wrist, and manipulated with the left hand? Just wondering if you have thought about that?
    Thanks,
    Rick
    PS: none of the "communities " accessible to me seemed appropriate for this question, so I am posting here, hoping someone will forward it on to the proper place in Apple.

    Does the apple Watch accommodate left-handed people? is there a mirror image option, or can the display be rotated 180º, allowing the watch to be worn on the right wrist, and manipulated with the left hand? Just wondering if you have thought about that?
    There's a option when setting up the watch to set it up for left handed users. That and the easily user revisable straps will accommodate lefties.

  • Is there some way to create a mirror image backup of iPhone and iPad ?

    Is there some way to create a mirror image backup of iPhone and iPad ? At this time our company has over 250 devices that are constantly being upgraded and passed down the line. it would speed things up considerably if there was a way to mirror the old device and then restore it on the new Phone or iPad. I don't care about any of the other features in iTunes, i just need something to speed up the process without having to walk them thru reintering their passwords, redownloadeing all the apps that didn't transfer ect.

    You would need to tell each user to make sure they backup their devices either thru itunes or icloud.
    With a company like yours, you should suggest backing up to icloud.
    IOS backup http://support.apple.com/kb/HT1766  then when the user gets a new phone, you or they can just restore from their icloud.
    The only hard part would be if the user has music (non purchased from itunes) which they would need to sync to itunes to get back on their phone.
    there is no easy process for this.  I'm in the same boat as you but way fewer people to deal with.

  • I am trying to print a T shirt transfer sheet and am attempting to do a "mirror image"

    I am attempting to make a personalized T shirt. I need to print on a transfer sheet  a mirror image.  I went under preferences and changed to t shirt transer but when I print it comes out normal. Not reversed as it should so when I iron the transfer paper on to the T shirt the writing will be correct.  

    ccintI:
    Welcome to the Apple Discussions. There's no way to get a mirror image for printing in iPhoto 6 except when the photo is in a book. You can, however, use Seashore, a freeware image editor, as the editor of choice in iPhoto and it can flip the photo vertically to get you the mirror image. You can set it up to use from within iPhoto as follows:
    Using 2 Image Editors in iPhoto
    If you want to use both iPhoto's editing mode and a 3rd party editor without having to go back and forth to the Preference pane, once you've selected the 3rd party editor as your editor of choice in iPhoto's General preferences under the Edit photo menu, reset the Preferences back to "Open in main window". Then when you Control-click on an image, you can select "Edit in external editor" in the Contextual menu to edit in your selected editor.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????

    I have been streaming videos and music from my phone and iPad. I just got a new MacBookPro and when I try to stream from it, I get the mirror image, but no sound. ????

    Hi Avonbikerider,
    If you are only having the audio issue when Airplay Mirroring from your MacBook Pro, you may find this forum discussion helpful:
    Apple Support Communities: No Audio when Airplay Mirroring from Mac to Apple TV
    https://discussions.apple.com/thread/4167956
    Regards,
    - Brenden

Maybe you are looking for

  • How can I delete a video from an album on my iPhone 5?

    How can I delete a video from my iPhone 5? I created an album and accidentally placed a video in the album and want to delete it. Is it possible to delete a video or picture from an album? Thanks!

  • Why do i have more than one "Sites" cert after updateing and expired cert.Can i delete the expired cert?????

    Hi After getting the below message i updated my cert but now have 3 of the same certs? Can i delete the expired cert????? There is no valid SMTP Transport Layer Security (TLS) certificate for the FQDN of SERVER.domainname.local. The existing certific

  • Call Transaction not executing in Function Module

    Hi, I am sending an IDoc from non SAP system to SAP system,IDoc calls(Inbound Process Code) Function Module in which i wrote BDC code.i found that it is not calling Call Transaction  but when i test the same IDoc from WE19 it executes perfectly and u

  • Problem With Zen Mi

    I recently upgraded the firmware for my Zen Micro and now the sync manager is not working correctly. I re-installed it using the new PlaysForSure version of it and when I sync it, it does not sync all of my songs and it says that errors have occured.

  • Delete(xml) in Flex namespace problem

    hihi I have problem with AS3 xml I want delete nodes in the folowing XML, which has title "undefined". A sample from the xml: <xml> <page> <title>Szabályalapú reprezentáció</title> <id>tudásterület_74</id> <revision> <id>1</id> <timestamp>2008-05-27T