Mising divice of driver

My Pavilion 14-n219TX with OS: WINDOWS 7 ultimate, 64bit, missing divice i cant found a driver for:
PCI\VEN_8086&DEV_9C3A&SUBSYS_2165103C&REV_04
PCI\VEN_8086&DEV_9C3A&SUBSYS_2165103C
PCI\VEN_8086&DEV_9C3A&CC_078000
PCI\VEN_8086&DEV_9C3A&CC_0780
and
UMB\urn:www-wdc-com:device:NetworkAttachedStorage:1NC
would you find a drivers for me
Thank you
Regards

Hi:
You need this driver for the hardware ID of PCI\VEN_8086&DEV_9C3A:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127794-1&cc=us&dlc=en&lc=en...
The other device seems to be for your portable hard drive. Unfortunately, I can't help you with that one.
Did you install the applicable USB 3.0 driver for your notebook?
Remove the portable hard drive before installing the driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&dlc=en&lc=en...

Similar Messages

U401 touch windows 8 audio driver unable to install error could not find divice for this driver

u401 touch windows 8 audio driver unable to 0wau05w8.exe install error could not find device for this driver
kindly advise

hi karthi2lenovo,
Welcome to the Forums.
If the conexant audio drivers from the lenovo website doesn't detect the device, can you try to:
1. Open Device Manager (press Winkey+R > type devmgmt.msc)
2. On the device manager, open Sound, video, and game controllers and Other Devices then check the status (if there's a yellow exclamation mark, error codes, etc.)
3. As an alternative, try this conexant driver from station-drivers:
Conexant High Definition Smart Audio
Version 8.64.59.52 (Win8)
Let me know your findings,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Satellite C660 mising driver acpi/tos1900

My system information shows driver for "acpi/tos1900/2&daba3ff&1" is not installed.
From where can I get driver for that?

Hi
As far as I know the driver for TOS1900 is Toshiba x86 ACPI-Compliant Value Added Logical and General Purpose Device.
Install the Value Added Package from Toshiba European driver page and this should fix your issue.

Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud? in apple tv 3 and 2?
That i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive, i dont want to see then whit the streaming and icloud, or used my laptop o pc for access de movies and stuff.
i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
if i can´t connect a external hard drive, wich others media players divices you know that can see itunes movies?
¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
lo que no quiero es usar la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
y de no poderse conectar que otros dispositivos media pleyer conoces para ver peliculas de itunes en la tv?

Welcome to the Apple Community.
can i connect a external hard drive to apple tv 3 generation
Unfortunately not.

Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!

Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support

Error "there is no disk in the drive..."

I loaded the FlexSQLadmin sample into Builder. When I click
the green "run"button, I get a "Windows - No Disk" popup with the
message "There is no disk in the drive. Plese insert a disk into
drive." Any ideas? I re-installed the builder but still get the
error.

Great post Jcat21. My HP has a built-in multi-card reader, I
disabled them, and now it works!
To disable it:
Open Divice Manager
Open "Disk drives" tree node
Right-click on "Generic USB CF Reader" and disable.
Right-click on "Generic USB MS Reader" and disable.
Right-click on "Generic USB CDReader" and disable.
Right-click on "Generic USB SM Reader" and disable.
I am not sure which disabled card reader made it work...I'll
test that next. Also, I'm not sure if it has to do with the
assigned drive letters, but mine were G through K.

Windows 7 no longer recognizing CD/DVD Drive - MS Window stock fix didn't work

Window 7 just stoped recognizing drive for the CD/DVD.
In Bios still see CD/DVD listed in boot tree. Device Manager doesn't show / list a CD/DVD, so no way to uninstall /reinstall.
Pulled CD/DVD drive, booted machine wihtout drive installed and rebooted. Reinstalled CD/DVD drive, rebooted and Divice Manager still doesn't show drive.
CD/DVD drive will initiall spin after being incerting a disk but will not auto play or show up when scaning for new devices.
Any suggestions?

Hi,
Please try Run now from the following link:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
or:
http://support.microsoft.com/kb/314060/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Driver issue with DVD SW820

I am not sure what happened to my drive / driver but here is the issue. My drive showes up in the divice manager and in the properties it showes a Code 39 "Windows cannot load load the divice driver for this harware. The driver may be corrupted or missing. (Code 39) {Unable to Load Device Driver} %hs dsvice driver could not be loaded. Error Status was 0x%x"
I have tried uninstalling (not physically) and re-scanned for it. It comes right back up with the same issues. I tried using the Windows drive update process as well as downloading and running the application from HP. Nothing seams to be affecting it.
As background this was preinstalled in my machien but I did at some point remove the SATA conection to test a hard drive I had. But reinstalled it and I believe it had worked since then.
Any ideas?
Thanks!
This question was solved.
View Solution.

Hi:
Try each of resolution steps 2, 3, 4 and 5 at the link below.
One of them should resolve the problem.
#3 or #5 usually works but try #2 first as that is the easiest one to do.
http://support.microsoft.com/kb/314060

Hard drive installation issue.

I'm replacing the internal hard drive on my 24" duo core Intel iMac (EMC 2134). The new drive is a 1TB Seagate Barracuda 720.12 and everything appeared to be going well, old drive out new drive in, everything back together and healthy bong on start-up.
Problem is that the DVD drive refuses to work when the new drive is in place so I can't format the new drive. Installation DVD goes in OK but after that nothing and it won't eject either.
So I take everything apart again, re-connect the old drive and hey presto the DVD drive is working again, DVD ejects - hooray. Re-connect the new drive and once again the DVD drive won't play ball.
Am I mising something? Is there a workaround or is there something wrong here?
Appreciate any ideas.

Seagate has been a problem for many, don't know if it has jumpr settings, but I'd oipt for one of these...
http://eshop.macsales.com/item/Western%20Digital/WD1002FAEX/
At least a jumper on pins 5&6 will slow it to 3 Gb/s.

How to backup iphotos onto an external hard drive....

I have been reading through the questions on here to figure out how to backup and save my iphotos externally and i am hitting numerous brick walls...
I have tried to use the time machine but my hard drive has photos and documents on it and i do not want to wipe it to install it as my perferd divice to use in time machine.
I have tried numerous other options and i am having no luck whatsoever.
Please help!!!!!

It doesn't even let me do that. I can't copy it at all over at all. I have 1 terabite of memory available on my external hard drive.
I have also tried to individually export photos and that also comes up with an error. I have had the computer 4 months and kept up to date with all updates so im unsure as to why that is not working.
That is like "my car won't start - Why not?
We need information about what is happening, not happening, what has recently changes, error messages
Saying "it does not work" gives us nothing to help with
LN

ATI display driver lost with Linux and XP dual boot os

I brought ThinkPad W500 with windows vista. I want to get rid of the hidden boot system reserved partition and downgrade to windows xp and install OpenSuse os. Following some sourses found on the web, I first set the bios sata ahci mode to compatable mode. Then install windows xp and update the sata driver. Restart and reset the bios sata back to ahci mode. It works fine with windows xp and I install back all driver. Finally I install OpenSuse and create dual boot with Grub.
But a serious problem come up with me. Everytime after restart from the linux os and back to windows xp, xp doesn't regonize the ATI display divice and tell me no driver installed with low screen resolution. And I have to restart the machine and boot direct into xp for the second time and the problem gone. But it is so annoying of doing this everytime. Anyone can help? Many thanks.
Solved!
Go to Solution.

Hi stanleyimko,
I don't have an answer, just a couple of questions:
Does your W500 have switchable graphics? If so, you may have to turn off "let the OS detect" or permanently select one or the other in BIOS. XP isn't switchable aware, so I don't know why that would make a difference.
Do you see the problem on cold (re) boot to XP, or only on warm reboot from Linux to XP?
Seems like something is leaving your BIOS in an odd state (I guess that's obvious) and maybe a cold reboot would sort it.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to install the driver of the 'SCSI and RAID Host Controller'

Hi,
I have two Windows XP(32Bit) installations:
•Windows XP SP2(32Bit) which is old and it seems as if it is infected by some viruses.
•I have installed another fresh clean Windows XP(32Bit) SP3. However, I have found that there is no category named with ''SCSI and RAID Host Controller'. However, when checking out the old version of Windows XP, I found 'SCSI and RAID Host Controller'
is there. (Screen shot below)
The new Windows XP(32Bit) SP3, there is no 'SCSI and RAID Host Controller'
My motherboard is:
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM.
]I am seeing that most computer doesn't has the scsi / raid controller . in the old Windows XP on my computer that SCSI and RAID controller exists, and it it has not a yellow mark on it.
When I installed a new windwos XP 32Bit SP3, no SCSI/RAID in divice manager .
My computer sound on new Windows XP doesn't work , however, on old Windows XP SP2 works well. I have a buitl-in sound card. SCSI and RAID controller category in the device manager on the old Windows xp SP2 is realted to sound card,I don't think.
Thus, What drivers would let the 'SCSI and RAID Host Controller' added in the device manager?
A man should convert his anger and sadness into strength to continue living in this life.

If you open the case and shine a light on the motherboard you can usually see both the manufacturers name and the model printed on the pcb somewhere. You should also normally see this information on the first POST screen when you turn on the PC.
Otherwise Google "775i65G" like I did.
Here are the driver downloads (assuming it is an Asrock 775i65G R2.0 and not an R3.0)
http://www.asrock.com/mb/Intel/775i65G%20R2.0/?cat=Download&os=XP
You should install the inf driver first. Hopefully after you do that you will see your desired listing in Device Manager.
With regard to the AMR driver and the HDMR driver, you can find some information about these here :
http://en.wikipedia.org/wiki/Audio/modem_riser
Unless you actually have something plugged into these risers, it is probably not necessary to install the drivers.
However, the drivers for the integrated C-Media audio chip and the Realtek Lan chip may prove useful.
It looks like the motherboard has integrated video but if you are using a graphics card it will not normally be necessary to install the VGA driver.
You can download both the manual and the installation guide here
http://www.asrock.com/mb/Intel/775i65G/?cat=Manual
And if "SCSI and RAID Host Controller" is still not shown in Device Manager, don't worry - because these functions are not supported by your motherboard (again assuming it is an Asrock 775i65G)
Thanks a lot,
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed
well, and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and
RAID Host Controller in device manager.
First: Why did the CPUz, specy didn't detect motherboard name, and only detect the model. IF I need to open the case and shine a light on the motherboard you can usually see both the manufacturers name and the model printed on
the pcb somewhere, then what benfit would be there from hardware detection software?
Second: Yes, my motherboard has integrated video, and integrated audio card
However, this doesn't mean that I don't need to install them since the Vidoe controller is not properly installed (it is a default VGA ) Also, Multimedia audio controller is not functiong at all.
Finally: if And if "SCSI and RAID Host Controller" is still not shown in Device Manager in Windows XP SP3, because these functions are not supported by my motherboard, then why is 'SCSI and RAID Host
Controller' installed/shown in the device manger in Windows XP SP2 on the same PC???
A man should convert his anger and sadness into strength to continue living in this life.

Driver "Intel(R) HM76 Express Chipset LPC Controller - 1E59" has a yellow exclamation mark.

The Driver "Intel(R) HM76 Express Chipset LPC Controller - 1E59" has a yellow exclamation in Divice Manager. How do I remove it? I just completed clean install of Windows 8 and this driver seems to be for windows 7.
Solved!
Go to Solution.

Hello Filipe.
Did you perform the clean installation of the Windows 8 Operating System in your computer? If yes, perform a complete system recovery using the recovery discs to restore your computer to the factory setting in order to troubleshoot the issue.
Follow all the steps mentioned here to perform the system recovery using the recovery discs: http://esupport.sony.com/docs/pc/SVE14A2_series/EN/contents/04/18/14/14.html#l1_recovering from reco...
Note: It is required to take backup of all the data before performing the system recovery, as it erases everything from the computer.
Note: If my post answers your question, please mark it as an "Accepted Solution."

Mount a USB flash drive from a shell

I am about six months new to Linux; I have installed my first arch system but not yet installed a desktop environment. I am trying to mount a USB flash drive from the shell but I am not having much luck. I have tried following the instructions in the archwiki, http://wiki.archlinux.org/index.php/USB_Storage_Devices. I am having a problem with the following command:
mount -t vfat /dev/sda1 /mnt/usbstick
I get an error message saying that the mount point does not exist. I have in the /mnt directory the following:
cd cdrom dvd fd0 f1
(I am not sure what fd0 and fl are, if somebody could please tell me I would appreciate it. Also I do not have a DVD-ROM on my computer is the dvd listed by default or do I have a package installed I do not need?) I did some searching online and came across the following site, http://linuxcommando.blogspot.com/2007/ … -from.html. I followed the instructions to identify the correct partition name corresponding to the USB drive by running the following command:
grep SCSI /var/log/messages.log
and I get the following results:
Dec 30 22:16:17 morgan-desktop scsi2 : SCSI emulation for USB Mass Storage divices
Dec 30 22:16:22 morgan-desktop sd 2:0:0:0: [sdb] Attached SCSI removable disk
The next steps in the instructions are to mount the partition to the existing mount point (directory) by using the following command.
mkdir -p /mnt/myusb
mount -t vfat -o rw,users /dev/sda1 /mnt/myusb
This is where I am having a problem, I do not understand the results and how to proceed to the next step, please help me.
One other small question what is the best command to shut down the computer as a normal user?
Thank you
Morgan Smith

Ok, Lots of different advice here, let's see if I can explain it all together, and clear up a few bits...
I'll try to explain why I'm saying what I am, it doesn't matter if you don't follow it all, commands are below.
You are on the right lines here, but a few things missing. Firstly, to mount the USB stick you are using the correct command, but the locations are a problem. The command is "mount -t type what/to/mount where/to/mount". You can find out more about the mount command with "mount --help" or "man mount"
You have correctly identified type as vfat - this means the pen is formated as FAT.
To find out what to mount, you can check /var/log/messages.log, the second command you posted searches trough that file and prints out lines including the phrase SCSI, and the result tells you that a usb storage device had been attached as sdb, so the correct device is /dev/sdb1. Storage devices are named sda sdb sdc etc in the order they are attached, and the numbers refer to the partitions on the disk.
You can mount it anywhere you want, as any existing directory, but the one you tried to use /mnt/usbstick doesn't exist, so create it, using mkdir.
The commands you need therefore are:
mkdir /mnt/usbstick
mount -t vfat /dev/sdb1 /mnt/usbstick
This will work as root. There is also, as byte said, a program called pmount (which you can get with pacman -S pmount) which works the same way for a standard user.
Finally, there are also a number of tools like HAL which can be used to automate the process.
As for shutting down, as has been said you must be root or in the power group, then you can use 'halt' 'poweroff' 'reboot' or 'shutdown'. All have slightly different effects, and poweroff is probably the easiest.
Hope this helps
Jack

Missing device Driver Software for Laserjet Printer M1120 MFP

Hi, I would like tolocate and install a mising driver device software for my Laserjet M1120 MFP. Any help would be greatly appreciaited. J

MartianLizard wrote:
Hi, I would like tolocate and install a mising driver device software for my Laserjet M1120 MFP. Any help would be greatly appreciaited. Jhttp://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3447598

Mising divice of driver

Similar Messages

Maybe you are looking for