Missed calls without it ringing and no internet on the go... HELP!
I keep having missed calls on my iPhone 5 without it even ringing. I've been told it says i'm on the phone when i'm not. What can I do to enable calls to get through. I've done the latest update. I also can't connect to the internet when i'm out. Help me.
Nat
Hello nataliaburton1979,
The articles linked below can help you resolve these issues.
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Cheers,
Allen
Similar Messages
-
my iphone4 disconnecting calls after 3 rings and show these calls as "missed calls" while the person who calls me still hear a dial ring. this started to happend after i upgraded to ios 7.0.4 please advise
this is really frustrating since i cant pick up calls with only 3 rings and i always miss them
i tried to restore like 3-4 times, didnt help
even tried to set the iphone as a "new iphone" on itunes and it didnt helpGenerally, when going out of the country and using a foreign SIM, carrier files can be changed. Go to Settings>General>About>and look at Carrier? What does it say? You may have to perform a restore. You can try a restore from a backup, that would reinstall the iOS, and would provide the latest AT&T carrier file as well. See if this will fix the problem.
-
When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
- During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
- With the headphones, everything is ok!
- I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
I don't know what is problem,because the speakers work.Hello jam5064,
We've an article which provides tips that can help get your iPhone working correctly.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen -
i am from Lebanon and they did disable my account because of authorization they did my cousin without my knowledge, and i did change the password of my account and the webcard used please can u help me to know how to get my account back
http://www.apple.com/support/itunes/
-
After I synced my iphone (4S with ios 8.1.2) using itunes with MS outlook on my new PC , suddenly all my contacts without telephone number and what I have the name of the contact only ?
I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again. -
cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?
Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you. -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
have a lenovo tablet running windows 8 - only 4 of my albums are showing in my list - this is my 4th device and I subscribe to the cloud HELP please I want to see my music
See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
tt2 -
Iphone 5c - missed call but no ringing
My iphone 5c won't ring (more often than not) when there is an incoming call. It then says I have a missed call even though the phone never rang. The phone isn't on mute and sometimes the phone will ring... but very often it doesn't. Any idea why this is happening?
Check: Settings - Do not Disturb.
-
I am missing calls without notification
I am missing calls to my iPhone with out notification. My girlfriend called me and it rang on her end and then it went to voicemail. I have had other calls missed, but those people would leave a voicemail and then I would get a notification. Why is that?
No this is not new. I dont know how many calls I've missed, because no one has said anything except for my girlfriend. She sent me a text right after the said attempted call.
I have not contacted my carrier. I'll do that now. -
International Missed Calls on my i phone 4s do not reflect 00s which creates a problem of a Call Back. Is it a Tecnical inadequacy or a Setting problem?
It has righted itself. I am not sure how. But I turned off the Powerbook. And on the MacBook Air, I made sure to change the MAC number to the MacBook Air one.
I restarted the MacBook Air. Now, the internet radio is working well, no rebuffering the stream every ten seconds.
And when I turned on the Powerbook and tried the internet this time, I could not get connected.
I think the bad internet connection on the MacBook Air was due to the fact that the internet was being shared by two computers. Funnily enough, the internet was OK on the Powerbook but was not good on the MacBook Air when I did that.
So, it didn't turn out to be a MacBook Air problem but an internet provider problem.
I will keep my fingers crossed that the MacBook Air internet connection keeps working fine.
I think it's possible to use the internet on both computers simultaneously but the quality of the connection is poor on the MacBook Air when I do that. And when I turn off one of the computers, it is not possible to share an internet connection when I turn that computer back on again. I have to set up the MAC number of that computer again on the nespot site for it to access the internet. But if I do that, the internet quality on the MBA suffers. -
My daughters ipod touch has been disabled because of a wrong passcode. After 2 days of trying to get into Itunes, it will not help without a passcode and is not recognizing it as a device even though the computer is recognizing the USB. I know I have to do a complete recovery, but can I do this without Itunes (or Icloud)?
You cannot do this without itunes on your computer
-
A couple days ago the font in the apps I am playing like Farmville, Puzzled Hearts and Cafe World went small and doesn't show the whole page either. Its not like that in Internet Explorer so that tells me its either a Facebook or Firefox problem. The Home page is the right size font I use. It's just so strange...
Thanks and hope it can be fixedReset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages -
Airport express and wireless internet at the same time???
hello,
i recently replaced an airport express that broke. before i replaced it, my house was set-up with my macbook in one room, airport express in the living room and home-internet router in the office.
i dont remember how i did it, but i set it up so that i could be connected to the internet and airport express at the same time. right now, its one or the other. either connect to the airport and listen to music, or connect to the router and get internet...
now, i understand you can do this if u plug an ethernet into the airport express, but its in a different room than the router.
so somehow i need the router and airport to connect to each other wirelessly????????Configure the AirPort Express (AX) using the instructions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.
-
I downloaded the" tones rings and alerts app.' I am unable to figure out how to get them downloaded to my phone. It is to small to read on my i-phone. I am unable to get any help when I bring it up through i tunes. I downloaded a CD and want to use some songs as a ringtone.
Just to add, i have also set up the two email addresses and verified them within my icloud account, but still no sync to my iphone or showing on the icloud account...
Maybe you are looking for
-
How to update values in ztable through hyperlink
Hi Gurus, The Problem is I want to send sales order in mail to any id and mail should have two links like Accept or decline and when user clicks on this link there sholud be some process to update z table. Pls help how to achive this. Should i use so
-
We are implementing a new company code and in testing the payroll results we are not getting the C1 table with the new company code. We are getting the C1 table with our existing company codes. Any thoughts? Thanks, Mark
-
Hi there, I am implementing a mail to RFC scenario and everything seems to work fine except of this: the RFC has a date as incoming parameter, which is not filled (correctly). When I look at the message being sent to the RFC adapter I can clearly see
-
Error on commit: Another user has changed the row with primary key : Rec_10
i am using jdev 11g R2 i implemented a master form and two detail tables on a jspx page added createInsert, commit and rollback buttons actions from these buttons all are executed from a bean for entity attributes: refresh after insert and update are
-
Re:reports(technical name)
Morning gurus I am running some reports in bex analyzer how can i know the technical name of any report query and how can i find whether it is a sap standard one or z report thanks pv