Missing connection of Material in Plant to Material Ledger

Hi,
We encountered an error when doing GR for PO without Account assignment.
Error: Missing connection of Material in plant to the material ledger.
Issue: Not able to post goods receipt for materials for particular Plant D059 with HIBE material type for purchase order without account assignment.
Materials were setup before value update selected for HIBE material type for plant X and hence price determination was blank in Material master.
client was unable to create purchase requisition for these materials andfound value update was not selected for this material type for this plant.
Later when value update was selected for HIBE for Plant X, Goods receipt cannot be posted with reference to PO without account assignment. But able to do MIGO-GR for account assigned Purchase orders.
After value updating for this material type for this plant X, purchase requisitions and orders were created but unable to do goods receipt for PO without account assignment. Goods receipt can be posted
for Purchase orders with account assignment.
Now we are unable to do change price determination for material attachedto HIBE material type.
Please let me know how to resolve this issue.
Thanks and regards, Muthuvel

Hi Bharat,
Again Thanks for the immediate reply.
As I have mentioned earlier, when the stock update was done for this material type, the material was created and it didnt have any value in ML Act and Price determination.
Material ledger was activated to production.
when the client found they were not able to create PR with account assignment, then value update was selected for this material type.
Now there is a problem in Goods receipt for PO without account assignment.
Whereas there is no problem in GR for PO with account assignment.
I cannot do now CKMM also since the present price determination is a mandatory field and blank is no accepted.
Please help.
Regards, Muthuvel

Similar Messages

Missing connection of material to material ledger

Hi,
i am having a material without a accounting view.while posting invoice of this material in MIRO I am getting a error "Missing connection of material () in plant() to the material ledger.
Error message:C+470
Can you pl tell the reason for the error
NS

Hi,
if the material type of the material concerned is configured for value updating you need to have an accounting view. The system does not know what to do with the price difference from MIRO without getting a price determination parameter for material ledger from the accounting view.

Changing Batch Management Level from Material to Plant

Hi all,
We are investigating changing our batch management level from material to plant to meet business requirements.
SAP has pointed us to a note with a program to reset the batch level, as well as highlighting some things to look out for.
I've conducted the change in a playpen system and so far it looks relatively straightforward, with complexities arising only when characteristics exist, or when a batch exists in multiple plants.
Seems that batch master data is moved from MCH1 to MCHA, including the object link number to classification. Unfortunately it seems a limitation of the conversion is that the batch master data is copied to ONE plant only in MCHA, no doubt due to the fact the object number link to classification must be unique.
My question is this: has anyone performed this change before, and if so can you offer me any advice on what to look out for, or potential problems that arose after the change?
Any help or comments are appreciated.
Mark.

hi..
first of all try this simple one...
You will have to delete all the materials, remove stock and then switch the batch management flag.
Or
To convert the batch from plant level to material there is Conversion Program defind by the SAP...
1. For all releases lower than Release 4.5B, implement the corrections and the modification in the report RM07CHDX as described in the correction instructions.
2. Create the report ZCHTCUCH, which is specified in the attachment.
3. Run this report in the clients for which you want to reset batch level to plant level.
4. Call transaction OMCT.
5. Check whether the batch level for "Batch unique at plant level" is set.
6. Implement Notes 821891, 944278, 950540 and 1091613 if you have not already done so (or you have not imported the corresponding Support Package).
7. Execute the function "Batch Level -> Conversion".
8. Define a plant for a plant view that may be missing.
9. Always execute the report in the test mode first. Analyze the error log.
10. If no errors occur, you can execute the report in production mode.
11. If you are working with batch long texts, first execute the report ZM07CHDX_TEXT in test mode.
try this out..hope is works,,
Thanks..

Mov.aver.price cannot be determined.Material RMWE,plant 7210,billing docCAP

Hello Guys,
Can anyone help on this issue.
Mov.aver.price cannot be determined.Material RMWE,plant 7210,billing docCAPE_01
Message no. Z1022

Rajesha,
Typically the trans./event keys hit on GR against a PO are BSX (inventory/stock posting) and WRX (GR/IR clearing). If the material is subjected to standard price control, you will have an additionally have the PRD key (price difference posting).
If you go to OBYC and see the account assignments for the PRD trans./event key, you will notice that you can have a different price difference income/loss account based on the material (valuation class), plant (valuation grouping code) and the account modifier (mvt type). In your specific case, the account modifier is blank and there does not seem to be a provision to define a new account modifer and link it to mvt 101 for the required combination (that I mentioned in my previous response). This seems to be the problem unless I am missing something here. For instance, in the case of a 201 mvt or a 101 receipt against a production order, the required combination is available in OMJJ and hence it is possible to define and link a new account modifier to a new movement type and hence use a different account for different circumstances. I am just not sure why SAP has not provided this option for your scenario.
Hope this helps.
H Narayan

Invoice verification for G/L account according to plant and material

Hello,
In MIRO I need to post a value against a G/L account, and need to connect it to a material and plant.
These fields appear in the table settings of table ACGL_ITEM, which is the table for the fields of the G/L account tab, but the lengths of these two fields are 0.
I've added the fields to the layout that I want to use in the G/L account tab, but because they have 0 length, they do not appear in the layout.
Does anyone know how I can add them to the G/L account tab, and also see them?
Thanks,
Sivan

Hi
You need to activate direct postings in the below customization
spro>MM>Logistics invoice verification>incoming invoice->Activate direct postings to GL accounts and material accounts.
Inside you need to activate both
Regards
Antony

How to find the Open sale orders till date for given plant and material ?

Hi experts,
                 I have a requirement to calculate the open sale orders for a given plant and material. I have tried in VA05 wherein i can get only for the material and sales area combination. From the document nos obtained from VA05 i can then find the plant. But my question is how do i get the output of VA05 into my progra. (can i use submit for a module pool report ).
Also if ther is some other standard table or Function module to find the open sale orders till a given date ,it will be even more helpful....in which case i can drop the VA05 route.
Kindly help
Thanks in advance
Ashwin

Hi Ashwin,
    You can use SAP Tables VBAK and VBUP to get to know if the document is complete or not.
   VBUK-GBSTK is the field that will give you the status of the Sales Order .
VBUK is used at header level , whereas VBUP is used for Item level.
So in your case what I would do is :
Get the Sales Orders that satisy the plant and material criteria from VBAP table , take this Sales Document numbers and go to VBUK or VBUP table to get the Sales Order Status.
   If I need to find the open quantity as well I will link to VBFA table based on the document number.
Reward if helpful.
Thanks,
Imran

User Exit to check whether chapter id for Material and Plant combination is maintained while creating sales order

Hello all,
my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
please suggest the user exit.

Hi
CASE 1 : All Plants are excisable.
In Material master , Foreign Trade data tab- mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
CASE 2 : Few Plants are excisable
In the Case 2 you need to go for Enhancement
Program Name : MV45AFZB
User Exit: USEREXIT_CHECK_VBAP ( Item Level Check )
By using above user exit you write a logic with the help of ABAPer
Plant and Chapter ID combination table : J_1IMTCHID

Stock transfer between plants - Material used is Asset material

Hi All,
We are using TAXINJ.
We are doing stock transfer of an asset material from Plant A to Plant B.
Proceedure followed as below:
Supplying Plant -
STO PO - ME21N
Outbound Delivery - VL10B
PGI - VL02N
Billing - VF01
Invoice DOc - J1IIN
Receiving Plant-
Goods reciept - MIGO
Capture excise thru - J1IEX
When capturing excise ETT is GRPO and the subtransaction type used is 01
We are getting the below message:
"No Cenvat amount to be posted"
"No Cenvat Amount to be reversed"
We are not getting any message when we are not using subtransaction type 01, and we are able to post part2 entries.
Pls suggest.
Thanks in advance
Pavan.

Hi Deivakaniraja,
Thank you for your suggestion.
Still have a querry....
The subtransaction type that is defined is not conventional.
We define various subtransaction type like 01, 02, 03, 04, but there is no standard that 01 to be used only for subcontracting.
I understand that IP is defined only for Import postings.
Can you pls brief me.
Thank You in advance.
Regards
Pavan

Need help on enhancement of 0CO_OM_OPA_1 with Material and Plant

Hi,
I have a requirement that need to build a BW report which shows Actual costs and Planned Costs of Service Orders. We are getting Actual costs from 0CO_OM_OPA_6 and now i am getting planned costs from 0CO_OM_OPA_1. For actual costs we are getting Service Orders, Material and plant from Satandard DS 0CO_OM_OPA_6. Where as For Planned Costs standard data source 0CO_OM_OPA_1 is not having Material and Plant information. For this we decided to enhance 0CO_OM_OPA_1 with Material and Plant.
But we are not sure the source tables for material and plant and the logic to extract these data from the tables. Can anybody please help me out.
Thanks for your supprt in advance.

It's possible you may need to use a CO-PA (profitability analysis) datasource instead of 0CO_OM_OPA_6. 0CO_OM_OPA_6 extracts data from CO tables.
Based on the path you provided "...Profit. segment...", the requested data might exist with CO-PA.
If you determine the required data resides in CO-PA, you'll have to create a datasource based on the operating concern. You can perform a search within the online docs for steps to create this datasource.
Hope this helps.
Rod

To Extend material to plant using MATERIAL_MAINTAIN_DARK .

I am tryin to extend material into plants using MATERIAL_MAINTAIN_DARK function module.Can someone please check the code below and tell me how i should modify it to work.Is BDC a better option?
DATA: t_amara_ueb LIKE mara_ueb OCCURS 0 WITH HEADER LINE.
DATA: t_amarc_ueb LIKE marc_ueb OCCURS 0 WITH HEADER LINE.
t_amara_ueb-mandt = sy-mandt.
t_amara_ueb-matnr = it_reqdata-material.
t_amara_ueb-tcode = 'MM01'.
t_amara_ueb-tranc = 1.
APPEND t_amara_ueb.
CLEAR t_amara_ueb.
t_amarc_ueb-mandt = sy-mandt.
t_amarc_ueb-matnr = it_reqdata-material.
t_amarc_ueb-werks = it_reqdata-plant.
t_amarc_ueb-tranc = 1.
t_amarc_ueb-KZKRI = 'X'.
APPEND t_amarc_ueb.
CLEAR t_amarc_ueb.
call function 'MATERIAL_MAINTAIN_DARK'
exporting
flag_muss_pruefen = 'X'
p_kz_no_warn = 'N'
kz_prf = space
kz_verw = 'X'
kz_aend = 'X'
kz_dispo = 'X'
tables
   amara_ueb                       = t_amara_ueb
   AMARC_UEB                       = t_AMARC_UEB
EXCEPTIONS
   KSTATUS_EMPTY                   = 1
   TKSTATUS_EMPTY                  = 2
   T130M_ERROR                     = 3
   INTERNAL_ERROR                  = 4
   TOO_MANY_ERRORS                 = 5
   UPDATE_ERROR                    = 6
   OTHERS                          = 7
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
COMMIT WORK.
ENDIF.
Thanks and Regards,
Pratima.

Hi ,
Use the below code.
DATA : lt_mara_ueb TYPE TABLE OF mara_ueb INITIAL SIZE 0,
       lt_marc_ueb TYPE TABLE OF marc_ueb INITIAL SIZE 0,
       lt_errors TYPE TABLE OF merrdat INITIAL SIZE 0.
DATA : wa_mara_ueb TYPE mara_ueb,
       wa_marc_ueb TYPE marc_ueb,
       wa_messtab TYPE merrdat.
DATA : l_mstring(480).
parameters: l_matnr like mara-matnr.
* Set up I_MARA
REFRESH lt_mara_ueb.
wa_mara_ueb-mandt = sy-mandt.
wa_mara_ueb-tcode = 'MM01'.
wa_mara_ueb-matnr = l_matnr.
wa_mara_ueb-tranc = '0000000001'.
APPEND wa_mara_ueb TO lt_mara_ueb.
CLEAR wa_mara_ueb.
SELECT SINGLE * FROM marc INTO CORRESPONDING FIELDS OF wa_marc_ueb
WHERE matnr EQ l_matnr AND werks EQ '01FC'.
IF sy-subrc EQ 0.
    MOVE '01BV' TO wa_marc_ueb-werks.
    wa_marC_ueb-tranc = '0000000001'.
    WA_MARC_UEB-PSTAT = SPACE.
    APPEND wa_marc_ueb TO lt_marc_ueb.
ENDIF.
CALL FUNCTION 'MATERIAL_MAINTAIN_DARK'
    EXPORTING
*   FLAG_MUSS_PRUEFEN               = 'X'
*   SPERRMODUS                      = 'E'
*   MAX_ERRORS                      = 0
      p_kz_no_warn                    = 'N'
      kz_prf                          = 'W'
*   KZ_VERW                         = 'X'
*   KZ_AEND                         = 'X'
*   KZ_DISPO                        = 'X'
*   KZ_TEST                         = ' '
*   NO_DATABASE_UPDATE              = ' '
*   CALL_MODE                       = ' '
*   CALL_MODE2                      = ' '
*   USER                            = SY-UNAME
*   SUPPRESS_ARRAY_READ             = ' '
*   FLG_MASS                        = ' '
* IMPORTING
*   MATNR_LAST                      =
*   NUMBER_ERRORS_TRANSACTION       =
    TABLES
      amara_ueb                       = lt_mara_ueb
*   AMAKT_UEB                       =
      amarc_ueb                       = lt_marc_ueb
*   AMARD_UEB                       =
*   AMFHM_UEB                       =
*   AMARM_UEB                       =
*   AMEA1_UEB                       =
*   AMBEW_UEB                       =
*   ASTEU_UEB                       =
*   ASTMM_UEB                       =
*   AMLGN_UEB                       =
*   AMLGT_UEB                       =
*   AMPGD_UEB                       =
*   AMPOP_UEB                       =
*   AMVEG_UEB                       =
*   AMVEU_UEB                       =
*   AMVKE_UEB                       =
*   ALTX1_UEB                       =
*   AMPRW_UEB                       =
*   AMFIELDRES                      =
*   AMERRDAT                        =
EXCEPTIONS
   KSTATUS_EMPTY                   = 1
   TKSTATUS_EMPTY                  = 2
   T130M_ERROR                     = 3
   INTERNAL_ERROR                  = 4
   TOO_MANY_ERRORS                 = 5
   UPDATE_ERROR                    = 6
   OTHERS                          = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK.
Regards,
Raghav

For plant ZKPL, material type FERT is not defined in Table T134W

Hello Everybody,
I have created a delivery and trying to PGI it.
But I see an error saying -
"For plant ZKPL, material type FERT is not defined in Table T134W".
Can someone tell me where am I going wrong please?
Thanks,
Sneha.

Hi
T code OMS2
choose your material type FERT and click on to qty and value updation
In the screen which is subsequently opening select your plant and tick for qty and value updation
After this log off for about 30 seconds and the relog and put the delivery in change mode VL02 and then do PGI
This hopefully solve your error
Regards
Raja

For plant 1200, material type Hawa is not defined in Table T134W

Hi Everyone.
I am trying to post a goods issue but having an error log.
For plant 1200, material type Hawa is not defined in Table T134W.
I checked table T134W (se16) - and material Hawa is assigned to plant 1200.
However I checked T-code OMS2 and Val.area 1200 is NOT associated with HAWA.
Is this the reason I am having this PGI error.
If so - how do I assign Hawa to Val.area 1200

Hi
The valuation area is plant that is 1200
In t code OMS2 choose your material type HAWA and in the left hand side there will be a dialogue box of qty and value updation and if you click that then in the subsequent screen which is opening you need to tell that HAWA at plant 1200 will have vaue and qty updation (need to tick both of them)
That is the cause for this error
Regards
Raja

Transaction code to display exception messages by material and plant

Hi,
Is there a transaction code or standard report in SAP to display exception messages by material and plant? I see the exception messages by individual material and plant in MD04 but I need to see a collective view. I tried Collective access in MD04 and MD46 but they are not giving me exception groups but I need exceptions listed out by material and plant.
Thanks.

Visu,
I have never seen such a report.
MD06 does support fine tuning the output display, once the list has been generated. If you use this feature, the resulting display is the entire list as created by selecting the initial parameters (such as exception group), but with the specific items that contain your selected message highlighted. If you are addressing the messages interactively, you can select the review (glasses) screens, and scroll through just the ones which contain your selected exception message(s).
To try this, execute MD06. Select the groups as necessary. Execute. Wait for the list. Now, immediately, select 'search' (binoculars). Experiment with the output.
As mentioned in the previous post, if MD06 does not meet your needs, you will need to have a custom report written.
Rgds,
DB49

How to get material and plant by providing control key as input ?

How to get the material and plant info based on control key values using a function module?
kindly help..

Hi,
Check the FM
K_VALID_PLANTS_OF_MATERIAL.
Sandeep Kaushik

Collect in an internal table with keys plant and material

Hi ,
I have an output internal table with material , plant and var quantitites .
I would like to use Collect statement and sum the quantities but do it by plant and material .
How do I specify that i want to do it on plant or material ?
Thanks !

hi here is an example like urs..
DATA: BEGIN OF seats,
        carrid TYPE sflight-carrid,
        connid TYPE sflight-connid,
        seatsocc TYPE sflight-seatsocc,
      END OF seats.
DATA seats_tab LIKE HASHED TABLE OF seats
               WITH UNIQUE KEY carrid connid.
SELECT carrid connid seatsocc
       FROM sflight
       INTO seats.
COLLECT seats INTO seats_tab.
ENDSELECT.
check for help..
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/collect.htm
regards,
venkat

Missing connection of Material in Plant to Material Ledger

Similar Messages

Maybe you are looking for