Missing DTPs, transformations of FI-CA & IS-U CCS into BI Standard Content

BI Experts,
I'm a basis guy trying to do some research for our BI team.
We are starting an IS-U CCS implementation (on top of existing/running SAP system) and have ECC6.0 EHP3 with IS-U activated in back-end. The BW system is connected to this ECC instance.
Our BI team says we are having the following problem:
"We need to get the missing DTPs, transformations of FI-CA and IS-U CCS into BI Standard Content "
We have a netweaver 7.0 system that was upgraded from 6.20 about 6 months ago. I recently updated the system to the following support pack levels:
SAP_ABA 700 18 SAPKA70018
SAP_BASIS 700 18 SAPKB70018
PI_BASIS 2006_1_700 8 SAPKIPYM08
SAP_BW 700 20 SAPKW70020
BI_CONT 704 1 SAPK-70401INBICONT
Can anyone tell me how I can get these missing DTPs, transformations and IS-U into BI standard content ? I'm wondering if I need NW7.0 EHP1 for my BI system?
Thanks,
Nick

just FYI, sap support is helping us resolve this issue. First, we loaded the transport from SAP note 1179880 . That helped give us the content, but still missing some DTPs.
Sap is working on a new support pack to fix our issue.
Thanks anyway guys,
nick

Similar Messages

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?

Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same.

My latest pano photo have missing landscape. Some of the photos are merged into one. I can provide the examples. What could cause this problem on a new 5C?

My latest pano photo have missing landscape. Some of the photos are merged into one. I can provide the examples. What could cause this problem on a new 5C?

Thanks for the input. I was finally able to find some test conditions that duplicated the problem, and it is either that or some other out-of-spec diffraction distortion. So I sent it off for repair.

After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6. 10.6.7 now appears to be missing from the computer and my administrator status has changed to standard.

After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard. Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone. I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive. Should I just reformat and start over? Any ideas or help would be appreciated.

PROBLEM SOLVED! For me at least!
Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
I reinstalled 10.6.7 using the DVD supplied and all is well.
The moral is - don't use Migration Assistant.
Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
Hope this helps.

Mapping(type routine) missing in transformation 2lis_03_bf - BCT 703, 704

Hi Friends,
i am on 703 BI content, than when i activated the 0ic_c03 infocube I observed that in transformation 2lis_03_bf mapping is missing, target field should is not mapped with source field, in earlier version of bi content target fields is gettinc caluclated by some routine and secondly start routine of 2lis_03_bf have syntax error, same with 2lis_03_bx and um transformation.
so we upgraded to BI conetent 704 with patch 0001 than i reactivated the 0ic_c03 cube but though problem is same.
so, we are now planning to upgrade support patch 0003 for BI content 704, will support patch 0003 for BI content 704 solve the problem or anyother thing required to do with current status of BI conetent 704 with patch 0001 to solve this issue?
Regards,
dushyant,

Hi Colin Moloney ,
we applied the 0003 support pack/patch for the BI content 704 from patch 0001 of BI content 704,
now start routine error of 2lis_03_bf is gone, transformation is comin as active verson once we do reactivation of object from BI content,
But still missing the mapping rules in transformation.
note 1179880 is saying that Import Support Package 3 into your system. is that mean patch 0003 for BI content 704?
note content - "Solution
Implement Note 1171293 in your system. The following procedure depends on the release you are using.
BI_CONT 7.04:
A Support Package that contains all transformations is available for Release BI_CONT 7.04. Import Support Package 3 into your system.
If you install Release 7.04 by upgrading from Release 7.03, only the changed objects (delta) are imported into the system. As a result, transformations may be deleted in the system, and you may only notice this when you activate the new BI Content from Release 7.04. The missing transformations are delivered completely in this Support Package"
now what to do?
regards,
dushyant.

Key Field missing in transformation

Hi
I am trying to use BI7.0 transformation (1-1 mapping basically) to send data from one DSO to another DSO
Source : DSO1
Key fields : Account ,Itemid, Position number
Target: DSO2
Key fields : Account ,Itemid, Position number
However when i create transformation i don't see "Itemid" in the source side in the transformation mapping. Rest of the two key fields are present.
Please help.
-Anurag

Hi, Anurag.
I just posted a question to the forum, because we are implementing the same architecture, and we are wondering how deltas will work with this
architecture. Are you using deltas?
The text of my recent post is below.
We are loading from R/3 into DSO1, and then from DSO1 into DSO2. The R/3 extractor that loads DSO1 is
delta-enabled. We are not sure, however, if a delta mechanism governs the load from DSO1 into DSO2. The
DTP says its extraction mode is delta, but does that mean, if a row in DSO1 changes, it will negate the key figures
on the original row and send a new row the way R/3 does?
For example, suppose the R/3 extractor sends us Row 1.
Row 1 has a key figure with a value of $100.
Row 1 gets changed in R/3, and the new value is $125.
The R/3 delta mechanism takes care of this by negating the key figure on the appropriate row and sending us a correcting
row. For example,
the R/3 extractor will send us:
Row 1 $100
Row 1 -100
Row 1 $125
So... the net value is correct, i.e. 100 - 100 + 125 = 125.
When we load from DSO1 into DSO2, however, do you know what rows will load into DSO2? Is BW "smart" enough to do this
type of negation?
Thanks!

Rule missing in Transformation

Hi Experts,
When i was created the transformation (for cube in bi.7) the following error occured, plz give me proper solution.
Rule 3 (target field: Z_PRI): Field /BIC/Z_PRI must be assigned to an InfoObject
Message no. RSTRAN526
Diagnosis
No InfoObject is assigned to field /BIC/Z_PRI. This is mandatory if you want to use the corresponding rule type.
System Response
The rule is invalid.
Procedure
Assign an InfoObject to the field
Thanks
David

Hi,
In Transformation you have to select rule detail and write routine like for exp:
My fields are z_prc & z_qty i have to calculate revene.
Routine:
go to revene field in traformations -> select Rule Detials -> Select Routine
Write Routine:
Result = source_fields-/bic/z_prc * source_fields-/z_qty.
like you have to write routine your problem is solved.
Thanks & Regards,
Venkat.

Missing Free Transform in Motion

This is a bit difficult to explain but, in Motion I've imported a picture I wish to crop and use for motion tracking. The picture should have, when I import it, circles on the four corners that allow me to free transform the picture. But, for some reason these circles never show up, even when I use stock content that came with Motion. If this is difficult to understand, but you can help, I can send you a screen shot of what I'm talking about. I really need anyone's help with this, I can still transform objects with the inspector but this is extremely time consuming.
Message was edited by: FranzyPants

click on the layer you want to transform then hold down shift and hit S.... this is the shortcut to select the transform tool...

Font is missing on the install prompt. How do I reinstall all standard macbook pro system fonts?

I recently installed a font pack and then removed the fonts shortly thereafter. Apparently the font that is used in the "install prompt" (the window that pops up for me to enter a password before installing new software) is now missing. The window pops up but everything is blank. How do I go about reinstalling all of the standard macbook pro system fonts?
Thanks!

I recently installed a font pack and then removed the fonts shortly thereafter. Apparently the font that is used in the "install prompt" (the window that pops up for me to enter a password before installing new software) is now missing. The window pops up but everything is blank. How do I go about reinstalling all of the standard macbook pro system fonts?
Thanks!

When I open Firefox, the panel that you type in is missing, the curser is there ,and when you click into it and start typing, nothing happens. I have uninstalled and reinstalled the latest updates to no avail.

The only way I can carry on a search, is to click on Google, and that takes me to another screen, with a panel to type into, and that works fine.

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).<br />
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

How to transform a business partner (t-code BP) into a customer ? (XD01)

Hi expert,
I'm trying to figure out a way to transform (or duplicate) a BP (data are in table BUT000) into a customer (data in table KNA1) in sap ECC6.0. Is there a BAPI or any other way to do this ? Any help would be highly appreciated !
Thank you !
C.K.

Hi Sai,
Thank you for the insightful answer, to my knowledge Bdocs require CRM, however we don't have CRM, just SAP ECC; I would like to do this within ECC itself.
Or is there a way to trigger bdocs nonetheless ?
Thanks !
C.K.

Transformation rule routine to split a record into several

Dear Experts
I have a small requirement but I am not good in programs.
I have a DSO with data at year level.
I want to transfer this data to a second DSO but split the yearly data into Quarters evenly by copying the source KF value (PRICE) into the Quarters where each quarter value equals the yearly value of the first DSO.
This is because the KF value is valid for the whole year. Thus, I need to copy this value into each quarter.
So, I have an Additional field in the 2nd DSO for the Quarter.
I have mapped the fields in the transformation but not sure how to write the Rule routine to for this additional field in the 2nd DSO.
Is this possible using a Routine Rule? Or must use an Start routine?
Source: FY2010 KF $100
Target DSO :
FY 2010   QTR1 KF $100
FY 2010   QTR2 KF $100
FY 2010   QTR3 KF $100
FY 2010   QTR4 KF $100
Please point me to a suitable routine or kindly give me some code structure to follow.
Thank you very much.
Best regards
Pascal

Dear Durgesh
I am unable to find 'Time Distribution' radio button in the transformation mapping screen.
I tried writting a start routine but not sure which stage in the code structure to insert the following :
The error message is : tyt_sc_1 is unknown. But i have checked this forum that this is how its declared. I inserted this data declaration in different places in the code but the error or other error persists.
Data : wa_source_package type tyt_sc_1,
           i_fq like /BIC/ZFQ.
Loop at source_package into wa_source_package.
i_fq = '1'.
concatenate wa_source_package-/bi0/fiscyear i_fq into wa_source_package-/bic/ZFQ.
append wa_source_package to Source_package.
i_fq = '2'.
concatenate wa_source_package-/bi0/fiscyear i_fq into wa_source_package-/bic/ZFQ.
append wa_source_package to Source_package.
i_fq = '3'.
concatenate wa_source_package-/bi0/fiscyear i_fq into wa_source_package-/bic/ZFQ.
append wa_source_package to Source_package.
i_fq = '4'.
concatenate wa_source_package-/bi0/fiscyear i_fq into wa_source_package-/bic/ZFQ.
append wa_source_package to Source_package.
ENDLOOP.
Please help . Thanks.
regards
Pascal

Some fields are missing from extractor to datsource in standard content

Hi
I have a standard datsource in CRM. when I see the extractor I can som eadditional fields which are not there in Datasource..
I hav enot enhance any fields. There some include structure in extract structure...
thanks for your help.
Sudha..

Extract structure can have more fields than what you see in your datasource...
The additional fields in the extract structure can be BW hidden or not relevant for BW..
You can check this in table ROOSFIELD for your relevant datasource

My Adobe Acrobat plug in is missing from the Addon list. I use Acrobat 9.0 Standard version.

I have reinstalled or repair Acrobat.
This problem shows up in Beta 12, 13 and RC1.
Beta 10 was OK.
Also note that when I click on tools then Options then Applications - Acrobat is not there also.

Error "The serial number is not valid for this product" | Creative Suite

Why am I missing music when I view shared libraries from my iOS device? Content is in tact on windows PC andbonapplevTV but not in iPad or iPhone shared libraries...

Running latest iTunes 11.something on Windows 7. Music is located on a network drive. All music is accessible through iTunes on my PC and on Apple TV but when I switch to shared libraries on iPad or iPhone, only music that exists in iTunes playlists appear. Im sharing all of my music but it doesn't seem to be working. Can somebody help?

You can only add music to iTunes Match from your iTunes library on your computer, not from your iOS device. If you have music on your iPad that is not on your computer, you'll have to import it to your iTunes library on your computer to add it to iTunes Match.
Music purchased from the iTunes store can be imported directly to your iTunes library by authorizing your computer for the Apple ID(s) used to purchase the music (in Store>Authorize This Computer), then connecting the iPad to your computer, opening iTunes and going to File>Devices>Transfer Purchases. Music from other sources will require using 3rd party software to transfer to your computer, such as Touch Copy.

Missing DTPs, transformations of FI-CA & IS-U CCS into BI Standard Content

Similar Messages

Maybe you are looking for