Missing entry in table T043G

While entering AR receipts with either of the following menu I am getting the message that' missing entry in table T043G'. I am trying to find more details of it , but could not...
Easy Access Menu:  Accounting  Financial accounting  Accounts receivable  Document entry  Incoming payment
Easy Access Menu:  Accounting  Financial Accounting  Accounts receivable  Account  Clear
Can some one tell what the issue could be .
Thanks.
Venkat.

You havent setup the tolerance limit.
IMG -> Controlling -> Internal order -> Budgeting and availability control -> Define tolerance limit for availability control.
IMG -> Financial Accounting -> Financial Accounting Global Settings -> Document -> Line item -> Define tolerance group for employees
IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Manual Outgoing Payments -> Define Tolerances (Vendor)
IMG -> Financial Accounting/ General Ledger Accounting/ Business Transactions/ Open Item Clearing/ Clearing Differences/ Define Tolerance Groups for G/L Accounts
IMG -> Materials Management -> Logistics Invoice Verification -> Invoice Blocking -> Set Tolerance Limits
And you need to assign the tolerance limit to the company as well.

Similar Messages

  • The entry ABCD ABCV  is missing in table T043G

    Hi
    I have to clear an open invoice manually using F-53.
    This is the error message i m getting
    "The entry ABCD ABCV  is missing in table T043G"    [Here ABCD is the company code]
    Please Help!
    Thanks!

    HI,
    please check if Your company code is defined in transaction OBA3
    or check the path IMG -> Financial Accounting -> Accounts Receivables and Accounts Payables -> Business Transactions -> Incoming Payments -> Manual Payments -> Define Tolerances (customers)
    Go through the customer master  and check which tolerance group the customer is assigned to (field' technical name is LFB1-TOGRU.
    Regards,
    Satish Muvva.

  • I am receiveing error while creating Z table: Entry in table TAORA missing

    Hi Experts,
    I am receiving "Entry in table TAORA missing" while creating Z table.
    Please help
    Edited by: N_niki on Jun 11, 2011 9:22 AM

    Hi
    1) Check for the DB System. The Table name in  "Entry in table TAORA missing", meant to save the "DATA CLASS of the ORACLE application"., OR
    2) check for the Data Class you Selected, on Creation of the Z Table, for which an Entry exists in the TAORA or the Available DATA CLASS in the TAORA Table to fix it.
    Regards
    Gopu

  • Archiving Object - Entry missing in Customizing table for object Z*********

    Hello friends,
    We have created a archiving object in transaction AOBJ. However when i enter this object in SARA, we get this error message.
    "Entry missing in Customizing table for object Z******* "
    I have matched my object with few other archiving objects and things looks similar.
    Have you faced this kind of problem..
    thanks
    ashish

    Hi,
    I checked and i can see entry for ZSCS_TRAFO object in AOBJ.
    But when i enter ZSCS_TRAFO, i get this error :
    Entry missing in Customizing table for object ZSCS_TRAFO
    Message no. BA057
    Diagnosis
    A function cannot be executed due to a missing table entry.
    Procedure
    Please create an entry for the archive object ZSCS_TRAFO with the AOBJ transaction.
    However, a few other Z objects works well.
    thanks
    ashish

  • Entry "EUROPE" is missing in the table "TTZDF & TTZDV".

    Hello Guys,
    I am facing this Dump error in my SAP, could anyone please help me in it, i am writing down the error analysis,
    :CONVERT_TSTMP_INCONSISTENT_TAB:
    In the existing case, it was tried to make a conversion between the
    local date (and time) and the ABAP timestamp (and vice versa). In doing
    so, it was detected that the entry "EUROPE" in table "TTZDF & TTZDV" is
      missing.
    Basically, all entries from table 'TTZZ' for 'ZONERULE' must also appear
      in table 'TTZR' and all entries for 'DSTRULE' must also appear in table
      'TTZD'. Moreover, all entries for 'DSTRULE' from table 'TTZD' must
    appear in table 'TTZDF', and/or table 'TTZDV', except for the case if a
    time shift of '00:00:00' is specified in field 'DSTDIFF' for this
    'DSTRULE'.
    Because of that i am unable to use this client 001
    Regards,
    Omar

    Hello Omar,
    You can use report TZCUSTIM with target client 001.
    Check the following notes for further information:
    198411 - Current data and information about time zones
    1260674 - Effectiveness of changes to time zone Customizing
    Regards,
    Eduardo Rezende

  • Entry in table TAORA missing! Please help with this error!

    I am moving a Z table from QAS to PRD and in PRD the table gets moved in inactive state. When I try to activate it I get an error "Entry in table TAORA missing". Could someone please give me any information how to fix this?
    Thanks.
    Mithun

    Hi Mithun Dada,
    when u created this Z table may u have not maintained the
    Data class and some setting correctly.Check for it and move it.
    <REMOVED BY MODERATOR>
    Thanks and regards,
    Rajeshwar.
    Edited by: Alvaro Tejada Galindo on Apr 23, 2008 5:14 PM

  • Entry in table TAX with authority CA --- is missing.

    Hi
    I change dthe residence state record effective june of last year and when the payroll runs , it throws the error
    Entry in table TAX with authority CA XXXX is missing.
    Has anybody come across this kind of error before.
    Thanks
    Revti

    Can you tell me the error number of it. Also make sure that required config for the US tax for both the state authority are configured correctly.

  • While posting f-53 i getting error missing table T043G

    Hi
    while posting F-53  i getting error "company code" is Missing table T043G.
    What can i do for this..  can u advise this.
    Thank u
    anil

    hi anil,
    you are not given the tolerance group for customers/vendors, give the tolerance group for the same and try it.
    also give the gl tolerance,
    try t.codes oba0, oba3
    pls award points.
    Raghav

  • Error "No entry in table T551A" while creating set work schedule rule.

    Dear Team,
    I am getting following error while creating set work schedule rule.
    Error "No entry in table T551A" for key 22 BBB [ here BBBB is my period work schedule]
    The actual prob is i configured all the necessary steps but when i tried to create work schedule rule im getting this error. Also, in the same screen there is one field DWS grouping initially value in this is 00 and gread mode. But after giving ES grp, holiday calander ID etc etc when i try to save that screen that value is chainging to 22 from 00.
    My ES grop=2 and PS grop=2 . Is that value is my ES and PS grouping..?? or some other thing.
    Request you to please help me out.
    Regards
    Shab.

    HI, there are 8 steps you need to do below:
    1. Group Personnel Subareas for the Daily Work Schedule
    2. Group Personnel Subareas for the Work Schedule
    3. Define Break Schedules
    4. Define Daily Work Schedules
    5. Define Period Work Schedules
    6. Define Employee Subgroup Groupings
    7. Define Groupings for the Public Holiday Calendar
    8. Set Work Schedule Rules and Work Schedules
    All of them belong to TIME MANAGEMENT. I think you miss some steps above.
    Please check it again.
    Regards!
    Minh

  • Error in transaction FB05 - Table T043G

    Dear Experts,
    I'm working on an SAP ECC 6.0 release and I'm trying to post an incoming payment from transaction FB05.
    As selecting the customer the system issues error:
    "Entry for Company XXXX not defined in table T043G"
    I have checked the table (related to customer/vendors tolerance limits) and an entry for the specific company being considered is already present.
    Is there a specific field that needs to be populalted as customizing tolerance limits in order to enable incoming paymet postings?
    Could you help me out?
    Thanks in advance for the help!
    Regards
    Davide

    Hello,
    The prerequisite is you should have tolerance group with blank.
    Go to transaction code OBA3.
    Copy the tolerance group of your company code and remove the tolerance group.
    You will have two tolerance groups.
    1. without tolerance group for your company code.
    2. with tolerance group for your company code.
    Now it should work.
    Regards,
    Ravi

  • Error in transaction code F-04, table T043G

    Hi experts,
    In executing transaction code F-04, I receive the following error:  "Entry for Company XXXX not defined in table T043G"
    I have checked table T043G and the company is not listed.  What config steps are necessary to correct this?
    Thanks for you assistance

    Hi
    That table stands for Customer/Vendor Tolerance
    Go SM30 and put V_T043G table and press maintain. Then Copy 0001 and change the Company code & currency - SAVE
    Hope your problem will solve
    Regards
    Tanmoy

  • Dimension key 16 missing in dimension table /BIC/DZPP_CP1P

    Hi all,
    I have a problem with an infocube ZPP_CP1. I am not able to delete nor load any data. It was working fine till some time back.
    Below is the outcome of running RSRV check on this cube. I tried to run the error correction in RSRV. But n o use
    Please help.
    Dimension key 16 missing in dimension table /BIC/DZPP_CP1P
    Message no. RSRV018
    Diagnosis
    The dimension key 16 that appears as field KEY_ZPP_CP1P in the fact table, does not appear as a value of the DIMID field in the dimensions table /BIC/DZPP_CP1P.
    There are 17580 fact records that use the dimension key 16.
    The facts belonging to dimension key 16 are therefore no longer connected to the master data of the characteristic in dimension.
    Note that errors that are reported for the package dimension are not serious (They are thus shown as warnings (yellow) and not errors (red). When deleting transaction data requests, it can arise that the associated entries in the package dimension have already been deleted. As a result, the system terminates when deleting what can be a very large number of fact records. At the moment, we are working on a correction which will delete such data which remains after deletion of the request. Under no circumstances must you do this manually. Also note that data for request 0 cannot generally be deleted.
    The test investigates whether all the facts are zero. If this is the case, the system is able to remove the inconsistency by deleting these fact records. If the error cannot be removed, the only way to re-establish a consistent status is to reconstruct the InfoCube. It may be possible for SAP to correct the inconsistency, for which you should create an error message.
    Procedure
    This inconsistency can occur if you use methods other than those found in BW to delete data from the SAP BW tables (for example, maintaining tables manually, using your own coding or database tools).

    Hi Ansel,
                 There has been no changes in the cube. I am getting this problem in my QA server. So I retransported the cube again from Dev to QA. But did not help me..
    Any other ideas??
    Regards,
    Adarsh

  • PR00 is missing in the table PRCC_COND_CT

    Hi Experts
    I have successful replicated all conditional Objects like DNL_CUST_CNDALL,DNL_CUST_CND,DNL_CUST_PRC from ECC to CRM2007,
    when i try to create a Sales Order in crm Condition types are missing ,i can able to see only values  with Zero in the condition Tab page for which i have maintained the conditional maitainece gp for PRODUCTCRM inorder to see condition types in CRM product conditions as per Building Block(c03).
    so what i was observed is condition types like PR00,K004,K005,K007 are missing in the table PRCC_COND_CT.which are not properly replicated into CRM system for which i have done the initial replication for all conditional objects so many time.
    Hence i request you all could you please tell me, is there any way to get all condition types into crm
    will it possible to add manually condition types in crm system.
    i would appreciate you help
    thanking you in advance
    Regards
    Rao

    Hi Bhanu
    I have checked in SLG1 there are following errors  and warnings
    Errors are:Table PRCC_COND_PPD has been posted in the database with errors
    Message no. CND_MAP155
    Table PRCC_COND_CT has been posted in the database with errors
    Message no. CND_MAP155
    1 .Error converting field FIELD_TIMESTAMP into /SAPCND/T685 for condition type BGEW.
        Message no. CND_MAP181
    Diagnosis
    Data records from the tables mentioned are required for converting field contents. These tables show inconsistencies that could have the following causes:
    A required entry is not available in one of the tables.
    Field contents for table entries are not compatible with each other.
    System Response
    Only those data records are modified in the table for which consistent table entries exist, and for which conversion of field entry is possible.
    Procedure
    With the help of OSS Note 314542 and instructions contained therein, analyze causes, and make necessary corrections.
    2. Error converting field FIELD_TIMESTAMP into /SAPCND/T685 for condition type BI00.
        Message no. CND_MAP181
    Diagnosis
    Data records from the tables mentioned are required for converting field contents. These tables show inconsistencies that could have the following causes:
    A required entry is not available in one of the tables.
    Field contents for table entries are not compatible with each other.
    System Response
    Only those data records are modified in the table for which consistent table entries exist, and for which conversion of field entry is possible.
    Procedure
    With the help of OSS Note 314542 and instructions contained therein, analyze causes, and make necessary corrections.
    3.Error converting field FIELD_TIMESTAMP into /SAPCND/T685 for condition type PR00.
    Message no. CND_MAP181
    Diagnosis
    Data records from the tables mentioned are required for converting field contents. These tables show inconsistencies that could have the following causes:
    A required entry is not available in one of the tables.
    Field contents for table entries are not compatible with each other.
    System Response
    Only those data records are modified in the table for which consistent table entries exist, and for which conversion of field entry is possible.
    Procedure
    With the help of OSS Note 314542 and instructions contained therein, analyze causes, and make necessary corrections.
    ther are follwoing Warnings:
    1. Double entry for table PRCC_COND_PPD. For details, see long text.
        Message no. CND_MAP815
    Diagnosis
    An error occurred during the update. You tried to update a data record with the key KAPPL = CRM and KALSM = 18CBCL in table PRCC_COND_PPD. A data record with the above key already exists in table PRCC_COND_PPD.
    System Response
    Data records with identical keys conflict with data integrity. The above data record was not updated for this reason.
    Procedure
    Use SAP Note 0314315 to eliminate the cause of the error.
    2. Double entry for table PRCC_COND_CT. For details, see long text.
    Message no. CND_MAP812
    Diagnosis
    An error occurred during the update. You tried to update a data record with the key KAPPL = CRM and KSCHL = 18CL in table PRCC_COND_CT. A data record with the above key already exists in table PRCC_COND_CT.
    System Response
    Data records with identical keys conflict with data integrity. The above data record was not updated for this reason.
    Procedure
    Use SAP Note 0314315 to eliminate the cause of the error.
    Edited by: padmarao mota on Mar 13, 2009 9:47 PM

  • Note 1681589: Missing entry in search help of RPUTMSE0 report

    Hola Buena tardes,
    Estamos aplicando la Note 1681589: Missing entry in search help of RPUTMSE0 report; En la version 4.7 hace referencia a un valor que no existe.
    Table: T52B5
    TMS1 RPUTMSE004  TOA C111E0
    Puede ser que el valor correcto es: sobra un número "1"
    Table: T52B5
    TMS1 RPUTMSE004  TOA C11E0
    Saludos,
    Jorogape

    Hola,
    En la vista V_T52B4 la encuentro como:
    TOA     C111E0     Modelo 111 - Impuesto sobre la renta PF
    Saludos,
    Carlos.

  • Table T043G

    Dear expert,
                         when i am doing vendor payment through f-53 then error occurred:- In company code (IPCL) table T043G is missing.As per my knowledge it is related to customer / vendor tolerance group. I checked it & it is properly configured.But the error is till now showing.What should i do at that time? is there any other problem?Please help me...
    Cheers
    Joy

    Please check this thread
    [T043G|T043G]
    Hope it helps.
    Srin

Maybe you are looking for