Missing files after backup via elements 11

I just now installed Photoshop Elements 11. I then allowed the program organizer to run "backup" (?) of my picture fies into the organizer. A very large file on my disktop that had mutiple smaller files of pictures just COMPLETELY DISAPPEARED FROM MY DESKTOP.     How can I now locate those files and restore all to my desktop?
HELP>

Being the first time I allowed this program to run, it did not ask me, at least I did not see it. It only asked if I wanted to "reconnect" to backup. I did not expect it to physically move any files. I "Assumed" it only meant to link them to the orginizer, where I could later reorganize based on future added picture information.
I searching for some files based on dates, the few it did link into Organizer, the ones I checked are now apparently jumbled from different files.

Similar Messages

  • Missing files after upgrading to lr 2.3

    lr 1.4 starting acting odd a couple days ago when certain photos in certain folders when clicked on and viewed in the filmstrip mode suddently changed right in front of me. they were cting like the syn mode was stuck in +20 wb. as soon as the change occured on each file there appeared an error message above it with 3 straight lines and an exclamation mark saying metadata had been charged. so i figured it was finally time to upgrade to 2.3 which i did by trying the trial issue just to see if the files showed up normal or appeared corrupted or changed too. well it got worse when the new catalog automatically loaded and of my 25,000 images nearly all say photo missing. this wouldn't be a problem if this was a couple but it is most of the catalog. i did a back up before the devil took over my machine and started changing the metadata. so i have that if i knew what to do with that info.
    I was hold on the phone to tech support from 6-7 last night and have been on hold with tech support since 10 am and it is now 1:30 on the west coast. I can't do much of any of my work as all my files, editing, printing are tied to LR. i got desperate and even tried creating a new catalog but when i clicked the photos on my tree in explorer to add them to a new catalog lr couldn't see them. i have avg software and no virus, i can see my photos in explorer, adobe cs3 and in bridge. i haven't changed the placement of the folders on my computer, any changes i have done have been within lr and they were mainly adding new meta tags which also didn't come thru and renaming some of the files from 2009-3-9 to adding pt scenery etc.
    i'm totally frustrated, i have spent so much time on hold i had to run out and spend $40 to buy a land phone so i could sit here without my phone battery dying. any suggestions while i sit here? i'm afraid to hang up on cs as i have been disconnected twice and they must have some sort of order in answering however at this point in time i can't figure it out.

    i have been so busy trying to find the files i just went back to some older files and found that the same rendering problem still exists. i open a folder click on a photo in the filmstrip and it automatically changes before my eyes, for a second i see a message that says rendering setting changed. i didn't touch a thing it just does it. i have gone into the syn and checked that everything is unchecked and it still happens. is there some other place for the rendering setting to be changed? it can't be a preference that i've accidently changed?
    For those photos that are changing, I can think of two things that it may be:
    If images are edited outside of Lightroom (in Camera Raw, etc), that can change the metadata (or Develop settings) of the file.  When you view the file next time in Lightroom, the new conflicting settings are applied to that photo.
    When raw files are imported into Lightroom, they initially appear with the embedded camera-generated JPEG preview. After that, Lightroom generates its own previews which typically look different than the original ones.
    Not sure if it's either one of those.
    so you think i can just click on your link and do the 2.4 update and things should work? i'm just not sure i want to do a backup with all the missing files, won't 2.4 open up with all the same problems or do you think the file naming issue will be corrected?
    I'm not saying that upgrading to 2.4 will necessarily fix the way things are now.  I doubt that it would make it worse, though.  I think you should make sure your photos and catalog are backed up, which it sounds like you said they are, then upgrade to 2.4 (if you're not already running that version).
    After the upgrade, you can go through your catalog and clean things up.
    -Scott

  • Missing Files after Lion Upgrade

    After upgrading to Lion I am missing files from a folder named "printers" I had created.  The previous os used a "printer" folder but not "printers".  It seems as if the Lion operating system deleted the existing folder and placed new files in there. I've searched the computer after enabling hidden files to no avail.  Any ideas as to how to recover the files? 
    Thanks

    Where had you put that folder?
    If in the top-level System or Library folder, that's why; those were replaced by the Lion installer, since we mere mortals are not supposed to fool with them.
    Restore it from your backups, but put it somewhere else; either in a user home folder or the special Shared user folder.

  • Slow playback on Roku2 of MOV file after Adobe Premier Element Export

    I have video files from a flash camcorder that encodes as MOV files.  This plays back fine on Roku2 using Roksbox and also on Real Player.
    When I export a video file from Adobe Premiere Elements 4 the playback through Roksbox to Roku2 is horribly slow, with no audio.  The exported file from Adobe Premiere Elements plays fine on Real Player.
    I have tried a host of different setting in Adobe (H264 and MPEG4 encoders, frame size, max bit rate) all to no avail.  Perhaps I am missing a critical setting.  I think the problem is somewhere in Adobe Premiere because I have been successful in using Full Video Converter Free 9 program to produce MPG4 files and they have played back fine through Roksbox and Roku2.
    Any suggestions very appreciated.
    Bobby

    To find the codec details,  use the programs below
    For PC
    http://www.headbands.com/gspot/ or
    http://mediainfo.sourceforge.net/en
    For Mac
    http://mediainfo.massanti.com/
    It would SEEM that your output file has "something" that does not match the file that works... so use the above to find out the details of the file that works, and set your PreEl output to match

  • Numerous missing files/folders in photoshop elements 11.0

    numerous missing files/folders programdata folder in photoshop elements 11.0
    What is the best way to renew the folder - ? delete all information about 11.0?

  • Need help: Itunes cannot locate multiple missing files after renaming

    All of music had strange names after transfering them to a new computer. I decided to use a program to rename all of them using a renaming program that renamed all of my music files based on their ID3 tags (Title, artist, etc).
    Well now I went to Itunes and it cant find the any of the files (figured that), so I find one and Itunes asks if it should find more missing files, and hit yes, but it doesn't find any of the other newly renamed files. Is there anything I can do short of doing this for each individual file? Is there a way I can change Itune search parameters for finding missing files? Thanks

    This is my standard post on the missing files thing...
    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    I sort of assumed the third party tool wouldn't have put things in an iTunes standard form which is why I offered my scrupt at the outset. If you can explain how they are organised I might be able to tweak up the script to work for your layout too.
    tt2

  • Missing files after System Recovery, HP Pavillion G62, Windows 7, 64 bit.

    My 5 month old laptop is showing signs of slowing down. When this occurs I do a system recovery in an effort to correct any problems. After completion of system recovery I always get the following error;
                              (the system cannot find the file specified (Ox80070002))
                               C:\users\owner\applicationdata\locallow.
                               C:\users\owner\contacts.
                               C:\users\owner\searches.
    The notice is in Notepad. None of the files can be found with a search from the main menu. If no refererence to the files can be found how does the computer know they exist? My feeling is that the computer cannot operate up to speed with missing files?
    I do have some other oddities occuring but I don't think you can solve anything if files are missing.

    Those are user file locations and will not affect windows or how it runs, you can ignore that error.

  • HT5654 Missing files after the update

    I am unable to start itunes since the latest update. I keep getting missing files pop up boxes and I have followed the directions and reinstalled - have tried both using the repair function and a the uninstall and reinstall function but nothing has fixed the problem. What do I do now?

    Hi there,
    Earlier iTunes (and supporting applications) need to be completely uninstalled before you can install the new version. Here's the complete Apple info on this: http://support.apple.com/kb/HT1923
    Mobile device application will most likely fail to uninstall, so you would need to visit its location(s) and manually delete the files then folder(s). The location of the folders is documented in this link from Apple.
    It's a pain, but it should work.

  • Missing files after moving itunes music folder

    i moved my itunes music folder to my external hard drive using the directions posted here: http://docs.info.apple.com/article.html?artnum=301748 to the letter. a lot of things transfered but now when i look in my itunes music folder and compare to my itunes library, i see that a lot of things are missing. i really don't want to have to go through every single artist folder and check every song. shouldn't consolidating my library have taken care of this?

    I just had a very similar issue, I moved my iTunes library from a 120Gb Drive to a 500Gb and the library was a bit corrupted because the main drive was full b/c of an error, but that's besides the fact.
    SOLUTION To missing files, that aren't really missing because they exist and were all copied no problems.
    go to the iTunes folder in your Home folder, and move the iTunes Music Library.xml file to your desktop (with itunes closed of course)
    Then re-open itunes and the library file that's not an xml doc, will re-search your files and all should be well.
    You should be able to safely delete the xml doc now, because iTunes made a new one.
    Cheers
    PowerMac G4 Dual 1Gz   Mac OS X (10.4.9)  

  • Missing Files After Deleting OS X System Folder from Disk

    This is my first post; I'll try to be brief.
    I got a new computer (G5 dual) and so wanted to "clean up" my G4 tower for my wife's use. I had three hard drives in the G4, one of which was an 80 GB drive with OS X (Tiger, I think) on it. Another drive had OS 9 on it.
    I bought a 300 GB drive for the G4 and put Tiger on that drive. Then I moved OS 9 to the 80 GB drive. In the process, far as I can remember, I deleted only the OS X System Folder from the 80 GB drive (not any prominent folders that appear in "fancy" form on the left side of a Finder Window); so, one OS on each drive.
    I deleted a number of files, and moved a number of files, in the process of doing my "clean up." Those files that I *moved* I can now find, no problem. But I left some files in the Movies folder (the "fancy" folder that is on the left side of a Finder Window in OS X) on the 80 GB, and those I now cannot find. My concern is that perhaps, in deleting the OS X System Folder from that drive I somehow either 1) also deleted the Movies Folder (inside the Home Folder inside the Users Folder) by the very act of deleting the System Folder (which seems unlikely to me) or 2) I managed to "hide" the Movies Folder by deleting the OS X System Folder.
    I have far more available space on the 80 GB drive than I would expect to see, given the steps I had to take to get some files onto CDs, etc. (I needed all the space I could free up, as I recall). So, this suggests the missing files just might still be there. Spotlight can't see them; booting in OS 9 and using Sherlock doesn't reveal them....
    Have I inadvertantly removed these files, or is there hope that they can be restored to life? A related question: If I did delete these files, is there a way to "un-delete" them at this stage?)
    Many thanks for any thought anyone may have.
    Bob ("rsimon")
    G4 Tower (pre-mirror)   Mac OS X (10.4.3)   Also have G5 dual

    If you did actually delete your valuable files, you want to stop using that computer as soon as possible. You'd have a good chance to recover deleted files, unless they're already overwritten by other data.
    Boot your G4 in Firewire Target Disk Mode (hold down "T" at startup) and connect it to your new G5 using a Firewire cable.
    The drives inside the G4 will mount as removable media, so you can browse them and try to find your movies folder. It should be located at
    harddrive/user/username/movies.
    You can use a utility like WhatSize to find large, (maybe hidden) files.
    Post back, in case your data has disappeared and you need a file recovery tool.
    Good luck.

  • Missed file after download

    May be somebody know, where can I get missed file wiyhout full download? I missed wwd.0.0 from oracle.webdb.wwd/3.0.7.2/1/datafiles/
    [email protected]

    Don the download again. Individual files are not available.

  • Photoshop CS4 missing files after uninstall of CS3

    I upgraded the Adobe Creative Suite CS3.3 Design Premium today to CS4 on my MacPro. The upgrade went smoothly. After using the Adobe uninstaller for CS3 and starting Photoshop CS4, an error message appeared stating that required support files were missing, re-install Photoshop CS4. After a second Photoshop CS4 installation all is well.
    Apparently the CS3 Design Premium uninstaller is removing a file required for CS4 also.
    This is not an isolated incident, as it happened again when installing CS4 on my MacBook Pro. I have also read of similar incidents in other forums. It seems to affect only Photoshop CS4.
    Jerry

    As I no longer require CS3 on my Mac after upgrading to CS4 and waiting for the required plugins to be available I have successfully uninstalled CS3 using the Adobe CS3 Creative Suite uninstaller.
    NOTE: please make a copy of the 'Adobe Unit Types.osax' found Macintosh HD/Library/ScriptingAdditions/Adobe Unit Types.osax
    At home did this without making a backup of the 'Adobe Unit Types.osax', so when I launched Photoshop CS4 it suffered from the "Error: "One or more files in the Adobe Application Support folder.."
    At work I did this with making a copy of 'Adobe Unit Types.osax', place it back after the uninstall of CS3... and presto so far so good.
    for the 'Error: "One or more files in the Adobe Application Support folder... are missing' when you start Photoshop CS4 (Mac OS)" read here:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407726
    sorry if this has already been posted, I could not see this anywhere.

  • Iphoto can't read old library files after backup

    Hi there,
    after a HD-Crash, a new HD, a new System and iLife5 I thought putting back the backuped iphoto library in the new iphoto 5 library should work. It doesn’t.
    Any other usual image editing program is able to open the .jpg Files (which I extracted manually from the old library folder because I didn’t know anything about an extractor) but iphoto says that the files “may be an unrecognized file type or they may not contain valid data“.
    I’m talking about 8000 Pictures!
    I tried to put them in manually by dragging some of them.
    I tried to import them via the menu
    I erased the preferences (that spotlight could find and some I remembered)
    And I thought about the REV Drive I used for Backup.
    I heared about permission issues...
    Any Help out there?
    You’ll get a nice Pict!
    Thanks

    OK, Problem solved.
    Today I decided to move the Backuped Folders to some other place.
    And than I decided to try again to import them by dragging (again) single jpegs into the (virtual) Library in the iphoto Window.
    It worked. I was surprized because that was nothing that I haven’t try before.
    BUT:
    The Problem was that I did all the steps above by still having the Folders (I tried to import) in the new Library Folder.
    SO:
    It is right what all the other users say: DON’T DO ANYTHING MANUALY WITH THE IPHOTO LIBRARY FOLDER. NOTHING!

  • Missing files after powering down and back up

    I turned off my new Air for the first time in weeks. When I powered back up I was and am missing alot of  open office documents and pictures I had downloaded and saved. Please help these aren't files I can lose.

    Voice command or Voice over?  Two different things.  Voice command can not be disabled, Voice over can.
    Have you tried a restore from backup or as new?

  • Missing files after ML updated

    I just updated my MacBook Pro today to Mountain Lion. I have a lot of my work files on here and when I went to search for some files they were nowhere to be found--I even searched by the exact file name. I went to look at "All Files" and the date when it was created...somehow every single file between April 2-16 have gone missing. Help!

    Where had you put that folder?
    If in the top-level System or Library folder, that's why; those were replaced by the Lion installer, since we mere mortals are not supposed to fool with them.
    Restore it from your backups, but put it somewhere else; either in a user home folder or the special Shared user folder.

Maybe you are looking for

  • How do I delete all of my current email?

    I have hundreds of emails if not thousands on my Ipad all of which I wish to delete because I have read (and deleted) these on my Mac.  When I delete the emails on the Mac they still appear on the Ipad as new.  So I've got old, outdated emails that I

  • Driver VGA VPCCW2JGX for win 8.1 pro 32-bit.

    Hello., I Justed updated operation to Win 8.1 pro 32bit. I cannt to find driver for VGA card with VIAO model VPCCW2JGX. Could you please help me to solve thi problem. Thanls & regards.,ALI QUANG.

  • Add cover sheet without affecting existing page numbering?

    I guess the lack of response means either that my question is inappropriate in some way or else it's difficult or impossible to answer! Thanks for letting me post it anyway! This seems to be a very informative site (just figured out how to access it

  • Maximum number os users in a group

    What is the maximum number of users that can be in a group on OS X server 10.4? IN 10.3 I think it was 10,000 I ask, because I am integrating with an AD server, where the group we are trying to manage preferences on is 28,000>

  • Multiple Backup Locations for Multiple Lightroom Databases

    I currently work with two lightroom databases but when I back up the databases, the backups get stored in the same Lightroom Backups folder. The two backups are stored in separate sub-folders but the actual database files have the same name. Thus, th