Missing files after powering down and back up

I turned off my new Air for the first time in weeks. When I powered back up I was and am missing alot of  open office documents and pictures I had downloaded and saved. Please help these aren't files I can lose.

Voice command or Voice over?  Two different things.  Voice command can not be disabled, Voice over can.
Have you tried a restore from backup or as new?

Similar Messages

  • I have spotty signal at my home, so some functions don't work until I leave the house. I noticed on the main screen, it says I have 54 emails, but when I open the app, I only have 4. I powered down and back up. No fix. What gives?

    I have spotty signal at my home, so some functions don't work until I leave the house. I noticed on the main screen, it says I have 54 emails, but when I open the app, I only have 4. I powered down and back up. No fix. What gives?

    Im having this same problem an my phone is about 3 weeks old. I am not sure about the voice over part though...I have not yet figured out how to work the voice recognition part of the phone...I am such a newbie with this phone. I did the power off/on suggestion, several times. I tried leaving it off for 10 minutes. Tried to reset with the power on/off and home button pressed at the same time. Charged battery. Still makes no difference. You cannot scroll any direction. Have to double click to open apps. Have to double click letters when texting or emailing in order to get the letter in the text box. Can scroll through app choices, have to click on the line with the dots in it and move from page to page. Can't access the settings - > general - > accessibility - because it won't allow me to scroll down to "general".
    Anyone help you with your fix yet?

  • WRT150N MUST BE POWERED DOWN AND BACK UP!

    Good day, I have a problem with my WRT150N in that each morning before I can access the router I must power it off and then power it back up. Until I power down/up the router, Windows and Linksys both show no network available. Not a matter of a network available and unable to connect, just no network available. It is a simple process but very annoying..once this is done the connection is good except for dropping the connection every so often but this is easily corrected by allowing windows to "Repair" the connection..and then it will work until the next dropped connection, which may be in 2 minuets or 2 hrs. This "Repair" works about 95% of the time and on the occasions that it does not work, I do have to power down and back up the WRT150N and it works fine. I have had the WRT150N for about 6 months and have had this problem for a couple of months now. I use the WPC300N adapter with XP. The dropped connection is just the wireless connection as the wired connection will work when the wireless does not. I have not updated the firmware to the router as it is version 1.1. Thanks for any help.

    Good day Wizzard,
    The uninstall and reinstall did not work..if fact it disabled the router and put me back to doing a complete uninstall of everything..all the software, reset the router, only then would it work but with the same problem..I have been in live chat with three different techs and they all have a different solution...one thinks my adaptor might be at fault..don't buy that, one suggested I upgrade my firmware but when I log on to check for updates it tells me I have the latest verison..1.01.9, the version listed on the Linksys site for latest version for the WRT150N and the other one didn't seem to have a clue before we got cut off...so, I am back to where I was..able to access the net and can do so with no problem...it's just that I have to do a power down and power up before I can log on to the router...I use Windows for my connection..I don't know why the uninstall and the reinstall did what it did but I do not want to go through that again..If you have any other ideas I would appreciated it..Thanks and have a great day!

  • Behavior after Power Down and Back On

    One utility I have installed on my 3GS is System Activity Monitor. It shows several things, including CPU activity and which processes are active. More CPU activity should mean faster battery drain.
    I started watching CPU activity a couple of days ago. One pattern I've seen is that if I power down with the top button, and then back up, the CPU idle percentage starts quite low, around 30% -- meaning that the CPU is quite active. The idle time quickly rises to the neighborhood of 70-80% and then slowly increases to around 98% -- which I take to mean low battery drain.
    Earlier today I did a Reset to see if that made a difference. It did not: Initial idle time was again quite low in the 30% range.
    I can draw no conclusions from this .. though I will ask my friend the iPhone developer about it, since it does not seem conducive to long battery life.
    Phil

    Right, what I meant is, you are saying that your only at 30% idle when it wakes up from sleep, meaning CPU usage is at 70% its powering itself up from sleep, it will use quite alot of power to do this. hence when it ends up at 98% its just waking up from sleep.You will see the same thing when you are powering down a computer, when you get the "logging off or shutting down" screen CPU usage goes way up.
    I think were on the same page here

  • Re started iphone after powering down, now is stuck in connect to itunes mode and wont do anything else. also has no service

    re started iphone after powering down, now is stuck in connect to itunes mode and wont do anything else. also has no service, I was able to retrieve all of my photos so the device is functional on that level. have restarted several times & also have restored data from i tunes. it said my phone is damaged.

    Jailbreaking
    Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
      Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • Whenconnecting to the internet thru safari, the requested page will begin to appear and then the screen will revert to the iPad home page. Have powered the ipad down and back yp with no change.

    When I connect to the internet thru Safari, the requested page will begin to appear and then revert to the Ipad home page. I have powered of and back on and wi-fi signal is strong. any suggestions.

    Safari crash regularly
    https://discussions.apple.com/thread/2460899?tstart=30

  • Losing Desktop Items/Documents after shutting down and restarting

    Twice, over the last couple of months after shutting down and restarting my macbook, everything on my desktop gets deleted, and it seems all the settings go back to their original form?
    Anyone have this problem?
    Message was edited by: jram1111

    Hi, I had this problem and it was due to setting file vault in the security settings. I removed having that set and then I had to go into system settings, Account and under Login Items, add back items such as mail and things that required passwords that were not coming up on my dock after each time I shut down.
    I hope this is helpful! Better late than never - if you have fixed yours, maybe this will help someone else.

  • Time capsule is frequently crashing and has to be powered off and back on

    I have had my Time Capsule for several months with no problems. Last few weeks it is crashing several times per day and has to be powered off and back on. When this happens there is no light of any color. The reset button does not work and I have to unplug it and then plug it back in. I have the latest updates. A couple of times it wouldn't restart after I plugged it back in for 10-15 minutes. Any thoughts?

    At minimum power down your entire network starting with modem first. Then wait a few and power back on start with modem first.

  • Captivate 6 Errors: Missing file libwinpthread-1.dll  and The Application was unable to start correctly (0xc000007b) on Windows 2008 R2

    Hi,
    I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested but the result is same.
    1- I used AMEE (Application Manager Enterprise 3.1) to create the installation Package to deploy through SCCM 2012.
    Notice that the current package works fine on Windows7 (x86 & x64) but not on 2008 R2 due to an error after I try to launch Captivate.exe application.
    The error states that there's a Missing file: libwinpthread-1.dll and if I copy and made a registration of this .DLL file then it sends another error saying: The Application was unable to start correctly (0xc000007b) so it never let me launch the application.
    2- Now if I install the package directly from the Original sources(CD) without creating any AMEE package after completing the installation I still have the same error about the DLL missing file.
    Is there any fix or workaround to install Captivate 6 on Win2008 R2 ?
    Thanks in advance & kind regards.

    Wow, No replies so far !! 
    Any one ?? 

  • Nokia Video Manager - Upside down and back to fron...

    Have been trying to convert some avi(DivX) files to watch on my N95 using the Nokia Video Manager. Converts the files fine and all but they are upside down and back to front??? Have seen that a few people on the net have had the same problem but have not seen a solution to or reason for the problem.
    Anyone have any ideas?

    I am using
    XP service pack 1
    Firmware version 10.0.018 (although this is not the problem as it plays upside down and back to front on my PC as well)
    All languages are English
    The file was a DivX copy of a DVD, I'm not sure which program I used to convert it but all my video files are doing this. Can you suggest a file from the internet which you know to work that i can download and see if it still does the same thing?
    Cheers

  • After power down and a cold restart, I automatically restart in my Administrator Account.  Running 10.8.4 with one Administrator account, one user account and one guest account.  Recently downloaded and installed 3rd party software (Panorama).

    After power down and a cold restart, I automatically restart in my Administrator Account.  Running 10.8.4 with one Administrator account, one user account and one guest account.  Recently downloaded and installed 3rd party software (Panorama).  Installation required that I create a super user named Other with root privileges. I did so and successfully installed the 3rd party software.  I powered down a few days late and when I restarted, I went automatically to my Administrator account with no login password required.  I deleted the Other account, powered down and restarted with the same result - opened in Administrator.   I then followed the steps to disable root user, powered down, cold restart - same result, opened in Administrator account.
    Any suggestions?  Any thoughts?  Much appreciate any help you might offer.
    jtsinphl

    Welcome to Apple Support Communities
    Disable automatic login. Open System Preferences > Users and Groups > Login Options, press the padlock at the bottom left corner, and select "Off" next to "Automatic login"

  • My phone keeps looping, powering up and powering down and continues the process.  I do not want to restore my phone where it will cause my pictures and video to be lost.

    First, a comment: this process ***** because I am typing my question in various screens for the fifth time.
    QUESTION:
    My phone keeps looping, powering up and powering down and continues the process.  I do not want to restore my phone where it will cause my pictures and video to be lost.

    Is your device jailbroken? Have you backed up your device recently?
    Cheers,
    GB

  • Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps.  As a result, all my apps remain open on my phone.  Even powering down and restarting does not solve the problem.  Specifically, the icons don't wiggle anymore.

    Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps.  As a result, all my apps remain open on my phone.  Even powering down and restarting does not solve the problem.  Specifically, when I double-click the start button, my open app icons display.  But when I hold my finger on an icon, the apps do not wiggle and display an "x" to close.  Any advice... thanks?!

    Double tap the Home button, then swop upwards on the App Preview (not the App Icon). Tap the Home button again when done to return to normal screen.

  • HT5654 Missing files after the update

    I am unable to start itunes since the latest update. I keep getting missing files pop up boxes and I have followed the directions and reinstalled - have tried both using the repair function and a the uninstall and reinstall function but nothing has fixed the problem. What do I do now?

    Hi there,
    Earlier iTunes (and supporting applications) need to be completely uninstalled before you can install the new version. Here's the complete Apple info on this: http://support.apple.com/kb/HT1923
    Mobile device application will most likely fail to uninstall, so you would need to visit its location(s) and manually delete the files then folder(s). The location of the folders is documented in this link from Apple.
    It's a pain, but it should work.

  • I have an MX722, with error code 6000. Have powered down and unplugged. code won't clear. what now?

    I have an MX722, with error code 6000. Have powered down and unplugged. code won't clear. what now?

    Hi jactoday,
    To try and resolve the issue, you will want to ensure that there are no obstructions in the printer that may be causing the error. To do this, please follow the steps located here.  If you still receive the error, the printer will require servicing.  Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for

  • Issue with submitting podcast.

    I recently submitted my podcast to the itunes store. As far as I know, everything was fine with the RSS feed. I was sent a rejection notice, so I went to look back, and realized that something within the description had come through screwy in the fee

  • How to display "No data for yesterday" in a scheduled report on Webi

    Hi All, In Webi, I am working on scheduling reports and was asked by a user if the scheduled report on Webi can display "No data for yesterday/no orders for yesterday" when the report returns no data due to No Orders submitted or a business holiday.

  • Maximum Open Cursors Exceeded - Oracle & Java

    I am using NetBeans ( Forte 5) for developing an application with Oracle Database. My application makes use of executeUpdate, executeQuery statements inorder to access Database. After few insertions and deletions of data through the host language( Ja

  • How to detect the size in pixels or percentage of a scrolling area?

    Hello there! I'm working capturing scrolling images and found a problem when I try it in another laptop, the thing was the resolution because in mine the scrolled area is added to the principal image and as I go down I merge the scrolling. But in oth

  • How to define new variable types in BPEL?

    Is there a way to define a new variable type directly in BPEL, without modifying any of the WSDL files used by Partnerlinks? Or to import an XSD with variable definitions?