Missing Fonts when fonts are activated on the system.

I created an Indesign CS6 document (334pg book) and used ITC Garamond Bold for the document subheads. This was done with a paragraph style. After editing the document I get a missing font warning for ITC Garamond Bold. The font is activated on the system using Suitcase Fusion 4. If I create a new document the font is available. Both documents open. One shows the font missing. On a Mac OSX 10.6.8. Any ideas on fixing this missing font error?

Why not obtain FontFingler or FontNuke and run these font cache burping utilities and see if the problem goes away? Is it installed in more than one place? Does one of your documents have a Document Fonts subfolder and the other doesn't? Did you maybe try to Export the afflicted document to IDML, and then turn around and re-open that file?

Similar Messages

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

The activated fonts are not the same version as those in the PDF. If you use Type>Find Font and replace the fonts with ones from your computer does it work?

Fonts are activated despite being off in Font Book

I opened a Word doc in MS Word 2008 and, all of a sudden, started asking me in a dialog box:
"Microsoft Word want to use the font... "bla bla" ... that was downloaded from the internet. Allow Microsoft Word to use this font?
And then buttons to either "Show in Finder" "Don't Allow" and "Allow"
Some I allowed and some I didn't allow.
This was a document I had previously opened in Word with no problem. These are fonts that were definitely not in the Word doc.
Now, in Word and other applications like InDesign, I have all my fonts activated despite being off or deactivated in Font Book.
That's nearly 100 or so fonts open that I don't need so this is slowing me down.
I've restarted - no luck.
Any ideas?

First try manually removing the Office font cache files. Close all Office applications. Remove the following files. The tilde (~) indicates your home account.
~/Library/Caches/com.microsoft.browserfont.cache
~/Library/Preferences/Microsoft/Office Font Cache (11)
For Office 2008, the location of the second item is:
~/Library/Preferences/Microsoft/Office 2008/Office Font Cache (12)
If that doesn't do it, read on.
Being unable to open or close fonts from within Font Book's interface is almost always a sign its database is damaged. The only fix is to clear it and start over.
Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally.
This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode. Any font sets you have created will be gone. Also, all fonts in the three main Fonts folders (System, Library, your user account) will now be active, regardless of their state beforehand.
Next, you need to clear all font cache files from the system.
Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
This removes all font cache files. Both for the system and all user font cache files. After running the command, close Terminal and immediately restart your Mac.

I bought the iPhone 4 user and when you are upgrading to the new system ios7 I have a problem activation lock note that I do not know what is the ID Apple and The password because the phone used?

I bought the iPhone 4 user and when you are upgrading to the new system ios7 I have a problem activation lock note that I do not know what is the ID Apple and The password because the phone used?
please help my what can i do?
IMEI : 012658006380001

Welcome to the Apple community Kobra.
Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

"Font not found on the system" for work logo font

I just started a new job and every single AI file I work with in illustrator is using VTypewriterRoyal - the company logo.
It automatically defaults to Myriad with the msg:
"Font not found on the system; missing font has been substituted."
I've spent way too much time changing it back from Myriad once in AI + scouring the web for answers. Haven't come up with any.
No one else at work seems to have this problem. I've tried installing and uninstalling the font.
Redownloading as OTF instead of TTF.
Nothing is working, so I really really hope someone can help me since I'm going to be considered slow if I keep having to take the time to change every ******* file I open.
Adobe support is seemingly overly complicated and this issue is making me crazy!!!
Someone please help. I'm on a brand new iMac 27" using 10.6.8....
Thanks.

check your spelling/spacing
I see
VTypewriter Royal
and
VTypewriterRoyal
They are different names...one has a space, the other does not
They must match exactly to work correctly

In Mountain Lion how does OS select between ethernet and WiFi when both are activated??

In Mountain Lion how does OS select between ethernet and WiFi when both are activated?? How does OS use "both" networl accesses??

It will pick the highest service in the list which has an internet connection.
To order the list, open Network System Preferences and select Set order of network services from the button below the service list.

Opening our program after payment when account is active but the dialog box says free trial has expired

opening our program after payment when account is active but the dialog box says free trial has expired

Has it ever been shown as fully licensed on this computer? Or has it just been showing a free trial countdown, which you ignored and it has now run out?

How system will automatically populate clearing date field for invoices paid similar to when payments are made to the vendors

Hi SAP Gurus,
Could you help me on this, How system will automatically populate clearing date field for invoices paid similar to when payments are made to the vendors.
Regards
Mohan

Hi Ramakrishnappa,
If you clear the invoice against payment, then the invoice clearing date would be payment document posting date.
Regards,
Mukthar

HT2589 what is a security code when you are registering at the iTunes after you have put in your credit number

What is the security code when you are registering in the iTunes Store just after you have put in your credit card number?

It's the 3 or 4 digit code that is on the credit card, it's on the front of some cards, or others it's on the signature strip on the back : http://support.apple.com/kb/HT3541

I have a new iPhone and when it was activated at the store I had not saved my pictures from the old phone. Is there a way to still do this?

I have a new iPhone and when it was activated at the store I had not saved my pictures. I there still a way that I can download the pictures from the old phone since it does not have service anymore?

No.

Server0 stooped when I try to start the system...

Hi gurus,
I don´t know what´s happen when I try to start the system and the Java side don´t start, it stay in MMC console with yellow semaphore at disp+work.EXE and when I look inside of J2EE Process Table in the same console the server0 is stopped and it show the exit code -11113 !!
I checked two logfiles:
dev_server0 :
Sun Aug 23 21:42:48 2009
14.537: [GC 14.537: DefNew: 103014K->17353K(131328K), 0.0753503 secs 103014K->17353K(1004800K), 0.0754636 secs]
Sun Aug 23 21:42:50 2009
16.592: [GC 16.592: DefNew: 104905K->18569K(131328K), 0.0589135 secs 104905K->18569K(1004800K), 0.0590141 secs]
Sun Aug 23 21:42:53 2009
JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
19.422: [GC 19.423: DefNew: 106121K->25119K(131328K), 0.0994074 secs 106121K->25119K(1004800K), 0.0995054 secs]
JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
Sun Aug 23 21:42:54 2009
JLaunchIExitJava: exit hook is called (rc = -11113)
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
JLaunchCloseProgram: good bye (exitcode = -11113)
dev_disp:
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1)
***LOG Q0K=> DpMsAttach, mscon ( sapssm)
DpStartStopMsg: send start message (myname is >sapssm_SSM_00 <)
DpStartStopMsg: start msg sent
Sun Aug 23 21:40:24 2009
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Sun Aug 23 21:40:25 2009
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet
DpMsgAdmin: Set patchno for this platform to 201
Release check o.K.
Sun Aug 23 21:40:38 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE

Hi Arun Singh,
I´m not change any UME parameter. I checked that in fact J2EE_Guest was locked, I already unlocked this user! But I think that is not the problem, because I checked in other systems and in all of them this user is blocked, so don´t seem this is the problem!
The following are server VM settings:
-Djco.jarm=1
-XX:MaxPermSize=256M
-XX:PermSize=256M
-Xms1024M
-XX:NewSize=171M
-XX:MaxNewSize=171M
-XX:+DisableExplicitGC
-verbose:gc
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-Djava.awt.headless=true
-Dsun.io.useCanonCaches=false
-XX:SoftRefLRUPolicyMSPerMB=1
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-Djava.security.policy=./java.policy
-Djava.security.egd=file:/dev/urandom
-Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
Answering to your second question in fact the system have the license out of date! But at two weeks ago the license was in the same state (out of date) and the java side on system was fine!!!...
Best regards,
João Dimas

Infoobject 0CEPRCS5 not active in the system

hello all,
When I am trying to install anything from BI Content. I am getting these pop ups:
Infoobject 0CEPRCS5 not active in the system and is being deleted"
And it keeps on going for alot of infoobjects, a few of them being 0CEBQRQM,0CERVSVOL,0CECLSM ...all are starting with 0CE.
I need to hit ok to get through all these pop ups and then my objects continue collecting.
What is this pop up for, is any one else seeing these pop ups?
Thanks,
Kiran

For the sake of discussion, I have the same issue for e.g. 0VKAPPSID and 0VKDLGID, when collecting the <i>not assigned characteristics</i> IOCatalog and the related objects before the data flow.
Davide

CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.

Hello and sorry for my english. My name is Jean-Pierre BRETHES and I have a problem with the creativecloud.exe program which doesn't want anymore to start. (since a while now) The icon in the system tray doesn't appear and it still to be gray (not red). When I clic to lunch the program nothing happen. When I try to reinstall it the download end by a windows "error 50" and everything is stopped.
AT the beginning I wanted to download In design program to try the PAO functionalities. Thank to help me. My email adress is <removed email - kglad>. Have a nice day. JP

Hello and sorry for the delay. Thank you for your answer. I did what you wrote and everything is fine now. Really thank you for that. I fully understood regarding my email address in my message. I will not anymore do this error.
Have a nice day.
Sincerely, Jean-Pierre BRETHES
De : kglad
Envoyé : dimanche 6 juillet 2014 23:33
À : Jean Pierre BRETHES
Objet : CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
created by kglad <https://forums.adobe.com/people/kglad> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/6527054#6527054>

How to see the BPS menu options when you log-in to the systems

Hello All:
I am able to use BPS0 and BPS_WB transactions to directly access the BPS development environment.
But I am not able to see the options for accessing these transactions in the user-menu(that appears to the left of the screen when you log-in to the system). I am using the BW 3.5 system. What should I do to see them in my menu?
Thanks,
Kumar

Hello Ajay,
I created a new role called "zrole" for displaying planning trasactions in the menu. The name of the area menu to see the planning transactions in BW 3.5 is "RS00_PLAN". I am now able to see all SEM planning transactions in the menu.
I am awarding full points.
Ashwin - Since the menu for accessing the planning transaction is not available by default in the SAP menu I had to create a role.
Thank you Ajay and Ashwin.
Regards,
Kumar

Why does my cellphone keep saying that estimating time remaining when I try to upgrade the system?

Why does my cellphone keep saying that "estimating time remaining" when I try to upgrade the system?
Is there anyway to fix this situation?

Hi Eric_Sun,
Thanks for visiting Apple Support Communities.
You may want to update your iPhone using iTunes on a computer if your device only shows "estimating time remaining" when you try to update wirelessly:
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you see an error message while updating your device, you can learn how to resolve iOS update errors in iTunes.
You can find these steps here:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
If you are still not able to update, I recommend the steps in this article next:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Best Regards,
Jeremy

Missing Fonts when fonts are activated on the system.

Similar Messages

Maybe you are looking for