Missing General Phone Number(field TYPE)while PC S...

Hi
When I sync my phone with Lotus Notes 7 via PC Suite, the General Phone field type didnt get sync accross to my Lotus Notes 7 Address book. Can someone let me know how I can resolve this problem? At the moment whenever i enter phone number through my mobile phone, i have to change the type to office/mobile in order to successfully sync with Lotus Notes 7. I noticed Lotus Notes 7 Address book doesnt have the General Phone field type hence data will be missing during sync.
Here is the Operating Platform
Windows XP Professional SP 2
PC Suite 6.84.10.3
Lotus Notes 7.0
Hand Phone MODEL: 6500S
Connection: Bluetooth
Thanks
Cheers!
DK

Just to confirm I am having the same problem (sorry not much help!). The 'Telephone' field in the E51 maps to 'Other Telephone' in Outlook 2007 and then 'disappears' when synched with my Revo. I have had to cut and paste the 'Telephone' field to the 'Telephone (home)' field on all my phone contacts and that has kept it under control.
If when adding a new contact in the E51, the default field was 'Telephone (home)' then I would be happy. It does not seem possible to change the entry default? At the moment it means having to remember to add this field every time I need to add a new contact's home phone number. The 'mobile' field works fine.

Similar Messages

Phone number field

I am trying to create a phone number field that will automatically create the dashes as they are typing in the numbers. For example: i type 222 and a dash follows after the last 2 automatically. I know about the regular expression validation you can set, but it is a little complicated for the end user.

Add the JavaScript to the HTML Header field of the Page definition.
Then add the following to the HTML Form Element Attributes of your field:
onclick="javascript:getIt(this)"However, be aware that the Javascript function in the example expects a particular document structure - it is not written generically so you will have to spend some time updating the example OR find another one.

Address Book/iSync - email addresses moving to phone number fields

I'm not sure what is causing this, but I'm noticing that email addresses in my cards are moving to phone number fields. I originally thought this had something to do with cards that had no phone number in them, only an email address, but now I"m realizing that's not the case.
I fixes all cards last night and just a minute ago, when I was in Address Book I noticed some or all of the email addresses had moved again. I reverted to my backup from last night and it fixed things, but I'm wondering what's going to cause those addresses to move again.
I do use iSync to sync my AB contacts to my Motorola phone (I think I have it set up where it's one way, computer to phone) and I have Entourage that's using my AB contacts to populate its address book.
Any thoughts about what in my environment is causing this?
-John

Thank you for the suggestion. I did this, but noticed that some cards were still messed up. So I reverted back to a clean copy of my address book from last night. Then I went to iSync and synchronized with my Motorola phone. That's when iSync says that it's going to modify over 5% of my contacts in AB (122) at which point I said okay. Problem appears to be that the cards it modifies is random.
Now to make matters worse, it appears that if I repeat this process over and over (revert, iSync, look through cards), there is no pattern to which cards are changing. I don't even know how to troubleshoot this. I'd love make iSync go one way - computer to phone - so that the phone can never write information to the computer. Is that possible?
I'm sure this needs to go to a different section...
-John

How to prevent users from entering '+' or '0' in front of country code in the phone number field?

Requirement:
How can I prevent guest users from entering '+' sign or '0' in front of country-code in the visitor phone number field during self registration?
Few SMS service providers are not looking for '+' sign or '0' or '00' in front of the international phone numbers to trigger the sms. Providing these values in front of country code during self-registration may fail to deliver the sms to recipient.
Solution:
Using a simple regular expression, you can validate the entered phone number during the guest registration.
The below regular expression will help you to validate the phone number and allows to register only when the phone number is not staring with '+' or '0'.
^[1-9][0-9](\d{7}|\d{8}|\d{9}|\d{10}|\d{11}|\d{12})$
It also performs the below validations.
only numbers are allowed.
first digit of the entered phone number should be 1 to 9, so '+' or '0' is not allowed.
numbers from 0 to 9 are allowed from the second digit.
also validates phone number length, the length of the phone number should be 9 to 14.
Configuration:
To add the above regex in the visitor_phone number filed, please navigate to ClearPass Guest >> Configuration >> (Pages)Guest Self-Registration >> select the self-registration page and go to Edit >> Register Page >> Form >> select the filed visitor_phone and set the Validator to " ISRegexMatch" and enter the above regex in the Validator Argument filed as shown below.
Note: Edit the Validation Error as per your requirement.
Verification
Adding the given regex will validate the phone number and prevent the guest user from registering the phone number starts with '+' or '0'.
Please find below the sample outputs for your reference.
Result when phone number starts with '+' or '0'.
Successful registration.

Is this a Mac Preview issue?

0 in Phone Number Field

Hey all,
I was just wondering is there a way to display a phone number with the 0 at the beginning of the number. This isn't a requirement, but I would like to. Would help the user.
I have already made the tables and inserted the data. I have searched about the net with not many results.
The number field is 11 digits and as a result of this problem I have had a few numbers with 11 numbers that aren't 0. I figured this would also assist error check and avoid any anomalies in the data.
Could I run a script to correct this problem? or would it be in APEX attribute settings?
Any help would be appreciated :)
Thank's in advance.
Edited by: 948251 on 02-Aug-2012 10:52

948251 wrote:
Hey all,
I was just wondering is there a way to display a phone number with the 0 at the beginning of the number. This isn't a requirement, but I would like to. Would help the user.
I have already made the tables and inserted the data. I have searched about the net with not many results.
The number field is 11 digits and as a result of this problem I have had a few numbers with 11 numbers that aren't 0. I figured this would also assist error check and avoid any anomalies in the data.
Could I run a script to correct this problem? or would it be in APEX attribute settings?
Any help would be appreciated :)
Thank's in advance.
Edited by: 948251 on 02-Aug-2012 10:52Of course, the best way to fix it is to use the correct data type in the first place. Just because it is referred to as a "phone *number*" doesn't make it a NUMBER. Neither a telephone "number", nor a US Postal zip code, nor a US Social Security "number" have any properties of numbers. You would never do any mathematical operations on them. They are really just character strings which, by convention, are limited to the same characters that are used to represent numbers.
And now you are dealing with one of the problems of using the wrong data type. Fortunately, this is not as severe as using the wrong data type for a DATE.

Need to have Phone Number field as just numbers with no formatting.

We have a web service that is passed the work phone field from the contact object. That WS uses the phone number to auto-dial the customer's number for our sales reps.
My issue is that the WS expects to just see the area code and the phone number as digits as 1235554444. It has been working fine for over a year and recently been failing as now the numbers come in with a "+" sign.
The format seems to change depending on the time of day I look at the fields and is random for each user. The company profile is set to USA as the default and so are the user's locale settings.
How do I make the "+" go away?
I have tried various settings and couldn't seem to find one that didn't give me the formatting. I've also tried to copy the work phone field to a hidden field and using WF to strip out the "+" but there seems to be no way to do a REPLACE() function in a WF rule.
Any ideas?

So after spending enough time with this I was able to find a way around the issue. Ultimately I needed a phone number format that was fixed and would not mask the data per the user's locale settings. It also needed to be just area code and phone number shown as 1112223333.
On the contact object, a new field was created as a Short Text. Then a WorkFlow as created that copies over the value from the WorkPhone field into this unformatted number so that it can be passed to our Web Service.
It took a while for me to figure this out since if you just use the WorkPhone variable you get all the masking based on locale. I didn't have the functions available to me in the WorkFlow to just strip spaces and "+" or "( )" so I needed it to be as close as I coudl to just a basic phone number. By using the FieldValue() function it seemed to take a number like 1 (555) 444-4444 and return 1 555 4444444. This works no matter if it was +1 555 4444444 or +41 555 4444444 so I could then use some pattern logic.
This is what I used to copy that data over to my temp/work field which is now passed to our click-to-dial function.
Mid(FieldValue('<WorkPhone>'), InStr(FieldValue('<WorkPhone>'),' ') + 1,3) + Right(FieldValue('<WorkPhone>'),7)

General ledger Number (Field) In purchase requisition

Dear Group Members Warm Greeting
In purchase requisition my users changes the general ledger number which come by default by entering the material number as the field is not in gray ( suppress )
Expert advice needed to fix the issue not to change by the user & the field should be suppressed
let me know the configuration
Regards
Shamulheq

Hi
Go to OME9 and make general ledger account in display mode for your account assignment
Regards
Antony

Number field type mapped as String

Oracle Number field is mapped as CSTRING when using CRECORDSET class in VC++.
Any ideas why? or what I should do?

How big is the number column defined? ANything larger than a NUMBER(14) will map to a character string since there isn't a datatype large enough to hold say a NUMBER(30).
Here is the mapping as I rememeber it (it is old information and may not be quite up to date with the latest drivers):
if Scale = 0 then if Precision <= 4 then
Number Size: Integer
if Precision <= 9 then Number Size: Long
Integer
if Precision <= 15 then Number Size: Double
if Scale > 0 then if Precision <= 15 then
Number Size: Double
Any other field types mapped to Text (Field
Size = 255).

E51 Outlook phone number Field.

Hi,
I'm having a problem with my E51, when using PC Suite to sync with Outlook.
When a new contact is added via the phone, and then synced with PCSuite, the Phone Field entry in Outlook is set to Other, even though on the phone it's set to Telephone:
Is there any way to change what field name is used?
I have the latest firmware for my E51
PC Suite is v7.0.7.0
MS Outlook is 2007 SP1
Thanks.

Just to confirm I am having the same problem (sorry not much help!). The 'Telephone' field in the E51 maps to 'Other Telephone' in Outlook 2007 and then 'disappears' when synched with my Revo. I have had to cut and paste the 'Telephone' field to the 'Telephone (home)' field on all my phone contacts and that has kept it under control.
If when adding a new contact in the E51, the default field was 'Telephone (home)' then I would be happy. It does not seem possible to change the entry default? At the moment it means having to remember to add this field every time I need to add a new contact's home phone number. The 'mobile' field works fine.

Making PAN Number Field MANDATORY while creating a Vendor

Dear Experts,
I want to create a Vendor Master with PAN Number Field Mandatory.
Is there any input for making PAN Number Field Mandatory at the time of creating a vendor.
Regards - Manjunath

Hi Trivedi,
I tried the user exit. But it is pulling the values.
Please find the coding here
IF j_1imocust-j_1ipanno = ' '.
MESSAGE e007(zmsg).
ENDIF.
We are not abe get the PAN vanue in j_1ipanno field.
Looking for your help .
Pleas guide.

Facetime symbol missing from phone number

Problem: I can no longer make or receive facetime calls to my iPhone 5, however I can to my iPad using the same apple Id.
When looking at my own contact I can see the facetime symbol against my email address but not my phone number. If I look at other contacts I can see they have the symbol agains there phone number and email address.
I have tried disabling and reenabling facetime and iMessage and as far as I can tell the number is verified.
Can anyone help?
[IMG]http://i1327.photobucket.com/albums/u662/fisheye95/c5eeb5ab3ac99a21ff48d453bf620 ce9_zps24dceb51.jpg[/IMG]

Read here:
http://support.apple.com/kb/TS4268

Right alignment of Number Field in OAF Page

Hi,
I need to right align the column of the table which is of number type in OAF page. I have extended the VO of that page to add new columns. After VO extension i added the column to the page via personalization and gave the reference of view attribute name as per Extened VO. I have set the following properties for that column
Item Sytle- Message Style Text
Data Type- Number
Nowrap=false
Vertical Alignment=Middle
View Attribute = Prior (same as Extended VO's column)
View Instance = XXPayEmpAccrualActionInfoVO
I need to set the value of this newly added column right align which is currently set as left align by default.
I have tried the following links from OTN
Re: Q: How to format number using personalization?
Right align number field
but while controller extension i m getting the following error-
Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME = XXPayEmpAccrualActionInfoVO; APPLICATION_MODULE = oracle.apps.pay.selfservice.payslip.US.server.PayPayslipAM;
The extended controller code is -
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OATableBean tableBean = (OATableBean)webBean.findIndexedChildRecursive("PayPayslip4Ss");
tableBean.queryData(pageContext, true);
tableBean.prepareForRendering(pageContext);
DataObjectList aColFormat01 = tableBean.getColumnFormats() ;
oracle.cabo.ui.data.DictionaryData ColFormat01 =(oracle.cabo.ui.data.DictionaryData)aColFormat01.getItem(pageContext.findChildIndex(tableBean, "Prior"));
ColFormat01.put(COLUMN_DATA_FORMAT_KEY,NUMBER_FORMAT);
Please can anyone provide me some pointer here..this is really urgent.
Thanks in advance
Renu
Edited by: Renu Gupta on Jun 14, 2010 5:15 AM

Hi Renu,
Use the following code:
OAMessageStyledTextBean origContSumBean = (OAMessageStyledTextBean)webBean.findIndexedChildRecursive("<FieldName>");
if(origContSumBean!=null) {
origContSumBean.setAttributeValue(CURRENCY_CODE,new OADataBoundValueViewObject(origContSumBean,"CurrencyCode"));
Here CurrencyCode should be a view attribute in the VO associated to the items in the region.
Regards
Sumit

Save a phone number without the input mask

Hi,
I actually have 2 related issues that I hope you might be able to help me with.
I have a form linked to an interactive report, so when I click a record, the form is populated with the record's data. I just started using the new text field masked input plugin to handle phone number formatting, etc., which Patrick recommended.
The plugin works nicely when a phone number being displayed from the source is 10 characters. The input mask I'm using is (999) 999-9999. However, I also have phone numbers in records that don't include the area code. When I select one of those records, the phone number field is blank. I would like it to display 999-9999, and be right justified. Is there an easy fix for that?
My next problem occurs when I try to save the record. The process tries to save the phone number, including the mask, (14 characters), to the table. I only want to save the number to the table, excluding the mask. I'm sure there is a way to do this but I haven't found it yet.
Thanks in advance for any help,
Gary

This is my solution to parsing the number only from the masked phone number:
1) Create a field, 'P1_PHONE_MASKED', with a phone number mask: (?***) 999-9999
2) Create a hidden Database Column like: 'P1_PHONE' It will initially hold the value of the record's phone column.
3) create a javascript function in the page's before header section, between the space tags, to strip out all non-numeric values and update the hidden field:
function remmask(src,tar){
var mystring = $x(src).value;
mystring = mystring.replace(/\D/g,'');
$x(tar).value = mystring;
4) Place the function call in the from in the HTML Form Elements Attributes of P1_PHONE_MASKED: onBlur="javascript:remmask('P1_PHONE_MASKED','P1_PHONE');"
Now, anytime you change the value in P1_PHONE_MASKED, P1_PHONE gets updated with just the number values from P1_PHONE_MASKED.
You can also add validation to the function to ensure that the length of the phone number is either 7, no area code, or 10, including area code. Normally, the mask should handle validation, but as you can see, to make this work, I had to make the mask more flexible, to allow for alpha numeric values in the first 3 positions and to allow for either 7 or 10 characters. Unfortunately, that means a user could enter something like XXX12 and the mask won't reject it.
Partial solution to displaying ( ) 999-9999 in the masked input field P1_PHONE_MASKED when initially selecting a record for display.
1) Make the Source Type for P1_PHONE_MASKED "SQL Query"
2) Insert a query similar to the one below into "Source Value or Expression"
SELECT
CASE
WHEN length(METAREPO.CONTACTS.CONTACT_PHONE) = 10
THEN
METAREPO.CONTACTS.CONTACT_PHONE
WHEN length(METAREPO.CONTACTS.CONTACT_PHONE) = 7
THEN
'___'||METAREPO.CONTACTS_2011.CONTACT_PHONE
END
FROM METAREPO.CONTACTS
WHERE METAREPO.CONTACTS.CONTACT_ID = :P1_CONTACT_ID
This will display 7 digit phone nubers as follows: (___) 999-9999 in the masked field: P1_PHONE_MASKED.
I wanted to use spaces between the () to make it perfect, but I'm unable to get this to work. I've tried things like:
' '||METAREPO.CONTACTS_2011.CONTACT_PHONE
LPAD(METAREPO.CONTACTS_2011.CONTACT_PHONE,3,' ')
Both of which work in PL/SQL Developer, but not in Apex. I believe this is because HTML collapses spaces by default.
I would like very much to resolve this last issue. Any suggestions?
Regards,
Gary

Phone number concept

It seems to me that the phone number concept in Maemo (don't know in other platforms) is maybe correct in technical sense, but not in usability sense. Let me explain.
The phone number field allows only a limited set of characters to be input: 0-9, *, #, p, w (anything else?).
At first glance, this seems to be a good idea, in order to prevent users to enter letters for instance, by mistake.
In fact however this is a severe limitation, for the following reasons:
1. If I want to read the phone number, it is quite difficult to visually follow long numbers, for instance if I want to check it, read it to someone or use it to dial on another device. It is much better to separate the number in shorter clearly distinguishable groups by spaces or dashes.
This however cannot be done on N900 on the phone.
Spaces can be entered in Ovi Suite, these are even transferred to the phone, there is no problem to make a call properly, but the phone is not able to identify the caller if the number is entered with spaces.
2. It is very good, that multiple phone numbers can be assigned to a single contact. It is also excellent, that there are field labels allowing to distinguish variants such as telephone - telephone home - telephone work etc. (by the way, an icon would do a better job)
But, there are numbers for a contact, where these labels are not sufficient and additional note or tag is needed, for instance a phone to neighbors, secretary, temporarily out of service etc.
There is no possibility to enter these notes, other than entering a new contact with the specific tag, but in such case the nice feature of having all numbers of the contact in one record is lost (and with 1500 contacts, this solution would even make it worse).
Since my old (6 years) smartphone has this possibility, as the numbers were imported into the N900, they came also with the tags written behind the number in brackets. But, this time N900 is not even capable to dial these numbers. In order to get the numbers functional, I had to remove all these tags manually.
I must say that I feel this as a strong drawback of the contacts features and it can make me even to drop N900, because I simply need support for such information and workaround is too laborious.
I suggest, that instead of putting limitations to the user, it would be much more useful to simply dial all numbers found in the number field (processing properly the +, *, #, p, w, of course) and leave out anything in ( ) brackets (for instance). It is so simple!
If an old smartphone can do this, I expect that tablet should be also capable of an intelligent approach.
If the entry limitation is really considered as benefit for users, ok, as an option it is fine, even as default setting. But it should not be killing the usability.
Is there any solution to this issue?

you've raised some good points, but imho its getting worse, not better..
With regards to tags, this is something I think pioneered on Nokia handsets (first time I saw it was on the first Symbian S60 7650 phone)
Each number has a type: business, fax, mobile, home, phone
and each number has a tag.. the defaults now are blank, home, business.. but on S60 handsets you can give them tags..
Business Phone (helpdesk) 1234567
Business Phone (reception) 5553333
for example is something I had on my phone for the place I worked..
However, The N97 (iirc) was one of the first S60 handsets to loose this ability.. The 5800 handset, the first S60 5th edition, had the ability, the N97 (the second S60 5th edition handset) did not.. and the N900 does not..
Bring back custom tags.. its very ordinary without it..
I doubt we'll ever see them on a Maemo / Meego handset

How to set phone number format like start with 0 or + it is not allowing

Hi All,
We Are trying to give in phone number field as number start with 099235623 or +91- like that
but it is not allowing to chage format
it is taking 99235623 eventhouh we entered as infront of zero
our requirement is we need to enter zero also
please give any idea
Thanks
Rio

Hi,
First Check the Data Type of the Field. That must be "DTYPE_PHONE". If this is the Data Type, then, it will allow the phone format set at the Locale Level for the Application. Check the Format at Locale Level.
[OR]
It's simple, you can change the Data Type of the particular Field to "DTYPE_TEXT".
Regards,
Joseph ArulDass

Missing General Phone Number(field TYPE)while PC S...

Similar Messages

Maybe you are looking for