Missing IMG entry - "Reuse country specific services" for iviews

Hi all,
We have experienced a problem related with an IMG activity which we couldnu2019t found:
u201CReuse country specific servicesu201D.
We need this for iviews to be used for different country grouping (in our case we have to use 99).
We know that we need to configure table T7XSSREUSEUISN but for some reasons it is not in the directoryu2026.
Any suggestions or work around?
Any inputs are much appreciated.
By the way our ECC is 5.0 and EP is 7.0.
Thanks,
Eugen

Hi,
check the below threads that may help you.
Re: Problem: Country specific ITS ESS services displayed for other countries
Re: ESS/MSS country specific
Raghu

Similar Messages

  • 'india ' not appearing in country specific services

    hi
    this is regarding <b>personal information</b> role in ESS in EP. for configuring in the back end r/3 system , i go to SAP reference IMG..
    when i go to "<b>Define Country-Specific Services (Add Entries)"</b> , i get a list of different country services..however, there is no country grouping defined for "India"...because of which i am unable to get the services...
    all my settings are configured according to grouping "40" whixh is india...
    can u suggest what i can do to add india in the list of countries?
    thanks in advance,
    aditi

    Hi Aditi,
    I hope u got ur answer in EP implementation Forum.
    Regards,
    Tejas

  • Reuse country specific application

    Hi all,
    We have a requirement for a bank info application for Trinidad.
    As per our requirement, the bank info application for Trinidad should be on the lines of the US bank info application.
    I am trying to reuse the US bank info application as per the steps mentioned here - http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30b0b66f-3a3d-2c10-4aa3-f53ee3299bb3&overridelayout=true
    However, i see that there is no screen structure defined for US bank info!
    So I copied the screen structure HCMT_BSP_PA_XX_R0009.
    Now i have to create a bank info resource for Trinidad. As i am looking at US bank info as best fit for reuse, should i copy the US bank info resource with the Trinidad namespace?
    The screen structure copied is of 'XX', while the resource that i will be copying will be of US. Is this ok? Or would it cause issues in the new application that i will create for Trinidad?
    TIA.

    You define country-specific services. When an employee starts a service, the system determines the employee's country grouping and checks if there is a country-specific service definition in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
    If there is a country-specific service definition, the system uses this definition.
    If there is no country-specific service definition, the system uses the general service definition in the V_T7XSSSERSRV and V_T7XSSSERSRVC views. If the general service definition does not contain a resource object, the system does not display the service (see example 2).
    This enables you to define country-specific variations of services for certain countries while using a general service definition for all other countries.
    Activities
    Examples
    Example 1
    Your company has employees in seven different countries:
    Germany (01)
    Austria (02)
    Switzerland (03)
    Canada (07)
    USA (10)
    (Number in brackets = country grouping)
    The service for displaying a salary statement is the same for Germany, Austria, and Switzerland. For Canada and the USA, you need services with additional content.
    You define a general service for displaying the salary statement in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
    You define two additional services for the country groupings 07 and 10 in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
    When an employee from Germany, Austria or Switzerland starts the service for displaying salary statements, the system uses the service definition in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
    When an employee from Canada or the USA starts the service for displaying salary statements, the system uses the service definition in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
    Example 2
    Your company has employees in two different countries:
    Germany (01)
    Switzerland (03)
    (Number in brackets = country grouping)
    There is a service that is only relevant for employees from Switzerland.
    You define a general service without a resource object in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
    You define a country-specific service with a resource object for country grouping 03 in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views
    This service is only displayed for employees in Switzerland.

  • ESS Personal information country specific services

    Dear Guru's,
    We have set up the following country specific services (Dutch = molga 05)  for the Personal Information Workset in ESS:
    - Adresses
    - Bank relations
    - Personal Information
    While testing these services for two persons the following situatin occurs:
    - Person A: has parameter MOL 05 set in transaction SU01 and uses ESS portal role.
    - Person B: has parameter MOL 05 set in transaction SU01 and also uses ESS portal role.
    Als the country specific services are defined to the country speficif resources.
    While trying to change the record in infotype 2, 6 and 9 for Person A using ESS all the procedures are succesfull.
    While trying to change the record in infotype 2, 6 and 9 based on the date of today for Person B the systeem gives back the following error:
    "record 00001101      0009        0        with date x has group value "" instead of "05".
                      (pernr) (infotype)  (sub)                  (date previous record)               (MOLGA)
    This seems to be strange because both users have exactly the same profile in ECC and Portal.
    Also the application seems te have a problem with the limitation of the previous record since the system says that that record has group value " "  instead of "05"
    Since this is the last problem we face in ESS we could need some help.
    Kind regards

    Hi,
    This issue is because of data inconsistency. In se38, the report RPUFIXDS should be run to fix this.
    This can be run for a single personnel number or a range of personnel numbers.
    Thanks,
    Muthukumar

  • Error in determining country specific length for account number

    Cannot determine country-specific length for account number;No instance of object type AccountClosureAM has been created. External reference: 0271409168GTABNGODUMMY00USDGO

    Thanks KI & Sujit
    Can you please tell me the Menu Path for OB40
    I have one another problem as below
    Jurisdiction code not defined for procedure TAXINN
    Message no. FF748
    Diagnosis
    You have entered a jurisdiction code in a country whose calculation procedure does not allow the entry of jurisdiction codes.
    System response
    Procedure
    Check and, if necessary, correct the entry.
    Procedure for System Administration
    If it is not an input error, check and possibly change the system settings.
    To do this, choose Maintain entries (F5).
    Change your calculation procedure so that tax calculation is carried out using the jurisdiction code.
    Can you please tell me how to solve this.
    Rakesh

  • Country Specific Service

    We have setup a new custom service and assigned to only country group 10 - US in the Define Country specific Services Node.
    However, when we login as a PERNR in a non-us country group, he is able to view this service and launch the WDA application.
    Are there additional setting to restict a service to specific country groups?

    Hi,
    Check following ...................
    You define country-specific services. When an employee starts a service, the system determines the employee's country grouping and checks if there is a country-specific service definition in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
    If there is a country-specific service definition, the system uses this definition.
    If there is no country-specific service definition, the system uses the general service definition in the V_T7XSSSERSRV and V_T7XSSSERSRVC views. If the general service definition does not contain a resource object, the system does not display the service (see example 2).
    This enables you to define country-specific variations of services for certain countries while using a general service definition for all other countries.
    Activities
    Examples
    Example 1
    Your company has employees in seven different countries:
    Germany (01)
    Austria (02)
    Switzerland (03)
    Canada (07)
    USA (10)
    (Number in brackets = country grouping)
    The service for displaying a salary statement is the same for Germany, Austria, and Switzerland. For Canada and the USA, you need services with additional content.
    You define a general service for displaying the salary statement in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
    You define two additional services for the country groupings 07 and 10 in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
    When an employee from Germany, Austria or Switzerland starts the service for displaying salary statements, the system uses the service definition in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
    When an employee from Canada or the USA starts the service for displaying salary statements, the system uses the service definition in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
    Example 2
    Your company has employees in two different countries:
    Germany (01)
    Switzerland (03)
    (Number in brackets = country grouping)
    There is a service that is only relevant for employees from Switzerland.
    You define a general service without a resource object in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
    You define a country-specific service with a resource object for country grouping 03 in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views
    This service is only displayed for employees in Switzerland.

  • Country specific infotypes for brazil and argentina

    Dear All,
    We are going for implementation of our client for brazil and argentina........can any body guide with country specific infotypes for the same

    Hi,
    Brazil:
    Infotype 0398: Agreement Components: Further Information
    Infotype 0397: Information about Dependents
    Infotype 0410: Transportation Allowance
    Infotype 0437: Simultaneous Jobs
    Infotype 0661: Employment Contract Termination
    Infotype 0598: Dismissal Protection
    Infotype 0185: Personal IDs
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/0f/1605350928385ee10000009b38f844/frameset.htm
    Argentina:
    Family Data Infotype: Special Schooling Assistance
    Termination of Contract Infotype (0551)
    Infotype Social Insurance (0392)
    Income Tax Infotype (0389)
    Income Tax: Deductions Infotype (0390)
    Income Tax: Other Employer Infotype (0391)
    Infotype Life Events for My Simplification (0875)
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/ee/28fd346f0f4661e10000009b38f844/frameset.htm
    Cheers

  • Disabling country specific checkings for it 0021

    Although we are a german-based company and only do german payroll, we still have to maintain personal records from our employees all over the world, mainly for reporting purposes. Last week someone from our HR-staff tried to create it 0021 subtype 1 (spouse), but just can't manage to get it work. Some debugging showed me, that a class CL_HRPA_INFOTYPE_0021_ES with method CHECK_NIF_CONYUGE_REPRESENTANT is called and throws an error. I haven't figured out what is checked, but I definetly don't want any checking at all. Are there any means to disable this country specific checking (customizing ???).

    Hi Shrinivas
    The messagenumber is 5E048:
    El valor  no está permitido para el parámetro
    According to babelfish.yahoo.com this means:
    The value is not allowed for the parameter
    well, that's the truth from SAP's point of view, because the afore mentionend
    method checks the subtype against t5e91:
    method CHECK_NIF_CONYUGE_REPRESENTANT .
      data:  wa_t5e91 type t5e91,
             l_msg TYPE symsg.
      select single * from t5e91 into wa_t5e91
      where infty eq '0021' and
            subty eq p_subty.
      if wa_t5e91-isfam eq 'C' or wa_t5e91-isfam eq 'R'.
        if p_codim is initial.
          CLEAR l_msg.
          l_msg-msgid = '5E'.
          l_msg-msgty = 'E'.
          l_msg-msgno = '048'.
          CALL METHOD message_handler->add_message
            EXPORTING
              message = l_msg
              cause   = if_hrpa_message_handler=>infotype_specific.
          is_ok = false.
        endif.
      endif.
    endmethod.
    What I need to achieve is, that class CL_HRPA_INFOTYPE_0021_ES isn't called at all, so no checking is done.

  • How to Disable Country Specific Checking for IT0021

    Hi
    I'm implementing PA for three countries.
    Client requires a common infotype be used across countries. For France and Italy I'm not able to set the IT0021 to the standard one. As SAP by default uses the Cpountry specific Infotpe.
    How to Disable this feature of SAP.
    - Aravind

    use the same Screen for the rest of the countries
    check P0021 in PE03 
    and check the number assigned to the screen
    if u want the screen number check system status and module pool number
    V_T582L for country specific
    V_T588M this for Module pool
    Edited by: Sikindar on Jan 16, 2009 8:54 AM

  • Country specific setting for SWEHR3

    Hi Experts,
    We have created a custom function module and configured it in SWEHR3 transaction code for the requirement of triggering notification to HR Team whenever employee changes his/her address details.
    Now we want to implement same functionality for some other country for which notification format is different.
    So we planned to create a new function module for this requirement.
    Now the problem we are facing is triggering the correct function module for respective country.
    Is there any possible option or settings available using which we can select/trigger function module based on country grouping in SWEHR3.
    Thanks in advance for your help.
    Avinash

    We are looking for setting in SWEHR3 to pick up respective function modules based on country grouping, is it possible?
    every country has its own notification format and data.
    Your already planned to create different FM's and code it individually. As explained above we don't have option to create entries based on MOLGA in SWEHR3.
    your writing logic for notification format and data in different FM's for different countries.
    You just have to integrate in single FM and map in SWEHR3
    This is the reason I suggested to create one FM and inside that you integrate all your FM's and call them based on MOLGA.

  • Country Specific Infotypes for Austria

    Dear Experts,
    Do you have the documentation for Austria localization for ECC 6.0?
    Or can you provide the link where I can find those documents?
    I'm not able to find them...
    Many Thanks in advance,
    Eugen

    http://help.sap.com/printdocu/core/print46c/en/data/pdf/PYAU/PYAU.pdf
    This could be of your help
    cheers
    Ajay

  • ESS - Reuse of Country Specific Application

    Hi,
    I am working on EHP5 enviornment. I have a requirement to show the Personal ID service in ESS for country Mexico. But this is not available as standard in ESS for Mexico. So I have tried to reuse the service Personal ID for Thailand. I have done the below configurations:
    1. Reuse of Screen Structure for New Country Version
    View:   V_T7XSSREUSEUISN
    UI Structure name: HCMT_BSP_PA_TH_R0185
    Type: Infotype.
    2. Specify Use Case and Active Subtypes: View: V_T7XSSPERSUBTY
    Ctry Grping: 32
    Infotype: 185
    Subtype: 01
    3. Define Country-Specific Services (Add Entries): View:   V_T7XSSSERSRVCG
    Service Key:   Z_EMPLOYEE_PERSINFO_PERSID05_Thailand
    Link Resource: EMPLOYEE_PERSID_TH_SERVICE_13
    I have checked the VIEKN table for an employee of Mexico and it contains the value 32.
    Pls let me know what other configurations I need to do or that needs to be done from the portal end.
    Thanks in anticipation.
    Regards,
    Ranjeeta

    Hi Ranjeeta,
    This will work with these steps you have specified. Also refer to the following documents also,
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
    This will solve your issue.
    Regards,
    Meera

  • ESS/MSS country specific

    Hi SAP GURUS,
             Any one please help me what are the standard country specific functionality provided by SAP for ESS/MSS, like leave management, Benfits, ......etc.
    Thanks & Regards,
    Samba.

    @ram manohar .....I don't think you understood the original question.
    For ESS/MSS, there are several country-specific delivered services. What is available will depend on your version. For ESS, there are several. For MSS, not many (if any, I can think of off-hand). I would highly suggest you go to help.sap.com and select your backend version and then look at the chapters on ESS/MSS which will list ALL country-specific delivered services. If a service is NOT delivered for your country of need, you can also "reuse Country-Specific applications” which is detailed in the configuration documentation in the IMG itself (basically you make entries in a table that says "when you see THIS molga, use the service that is associated with this OTHER molga instead").

  • EHP5 - Counntry specific language for users in ESS

    Hi Experts
    We are using EHP5 and facing problem while enabling country specific language for users in ESS .
    Here we have .
    u2022     Made language field blank in JCO
    u2022     Have maintained country specific language in SU01-Default and in UME
    u2022     We have maintained country specific language in browser u2026also  .
    u2022     We have maintained entry in IMG (SAPDEFAULTESS_ERP2005 )
    But itu2019s not working for us either in portal or in NWBC ( we have both connection available to our sandbox ). Other than English it works only for Germen (but not completely few services still appears in English e.g My processes )
    Your advice will be greatly appreciated  .
    Thanks
    Aditya

    Hi Deepak And Siddharth
    Thanks for your reply  . I checked language packages in SMLT and here we have status for all  languages other than English and German is  yellow ( Warning ) Also
    for NWBC in role menu only  display translation options is available only for English and German and hence  we have asked basis team to look into this ..Will  keep you posted .
    Thanks again
    Aditya

  • Country Specific iViews Foreign Addresses

    We have a business requirement to support foreign addresses.  I know SAP does have country specific iViews in the ESS business package.  Does anyone have a configuration document or know of a wiki article on SDN that explains the setup process? 
    Thanks.

    Note 936179 Reuse of country specific Applications.
    Note 953852 Best Fits selection for re-using country specific service
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b0b66f-3a3d-2c10-4aa3-f53ee3299bb3?quicklink=index&overridelayout=true
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
    Study above links and refer to given SAP notes....
    If you face issues in understanding any particular step then revert back.........

Maybe you are looking for