Missing Info Objects in Business Content

Hello,
the business content of our system has missing IO. For the Bank Analyzer there are missing 3 IO which are used for the cube etc.(IO are S20BPART,S21DFVAL, S40FTRAN).
For me is this problem new and I want to now if anybody has experience with this type of problem. On oss I could not find anything, so what could be the reason
Thanks
Henning

Hello Henning,
We had the same problem with BC 7.03. I guess it was support package 5. We had to open a customer message and got a corrected version which became part of the next support package.
Kind regards,
Stefan
PS: Of course it were different InfoObjects. In our case it was something related to Production Planning.

Similar Messages

  • Missing Info Objects and Business Content in IDES ECC6 with BI7.0

    Hi All,
    I do not see most of info objects like 0COMP_CODE, 0BUS_AREA, 0RESP_PERS etc. and lot of objects missing in Business Content too.
    I have IDES ECC6 with BI7.0.
    Could someone please help me to retrieve those objects.
    Thanks.

    Hi Kishore,
    Thanks for the info. I am little confused. I thought i had full BW in my ECC6. What is the difference between ECC6.0 with BW and ECC6.0 with BW/BI7.0? BI7.0 has all business contents in it?
    The IDES software has BW/BI 7.0 in it. That is what the person whi gave me told me. How can i verify that?
    I have some knowledge of BW and i am trying to learn this new BW 7.0 on my own. Since it does not have BI content how can i proceed to learn on my own.
    Please help. Thanks.

  • Error While Grouping the objects in Business Content

    Hi BW Guru,
    Have u any idea about the following Messages.
    RSA1- Business Content -> Grouping ->Only necessary Object for the INFOCUBE (0SD_C03) in business content for install it is showing message like
    1. InfoObject 0PDCEOBJ is not active in the system and is being deleted
    2. InfoObject 0PDCEPOBJ is not active in the system and is being deleted
    Any suggestion is appreciated.
    Thnkx,
    Debasish

    hi,
    check the availability of that info object in business content...then activate it and proceed..
    Siddhu

  • HowTo provide modifid Business Objects for Business Content Provider in MSY

    Hallo,
    we are currently working on Reports and hence do need to work with the BCP (Business Content Provider). We now come to the point, were we have issues and have to enhance the Data structure. According to the documentation the Busienss Objects (BO) is maintained in the MAS, but whatever I do I am not able to get the any modification visible in MSY. I only was able to see modification on the relationship tile in MSY, but nothing else.
    I realized at least that only attributes are visible in MSY, which are actually assigend to an BDoc Segment field, so I have created my own Z_Attribute and assigend an existing segment field "ALT_ID". I did a generate all, performed an rebuild of the MSY (called in MAS as "Mobile System"), performed an ConnTrans and also did an "Reload Structure" in MSY, but nothing is going to change.
    I went thru the help.sap.com Docu http://help.sap.com/saphelp_crm50/helpdata/en/fe/f34456d2672547be0efe4968913223/frameset.htm , but  there is nothing that tells the general limitations & rules I have to consider unlike the MSA application. Questions like "Is the BCP based on the BO in MAS or more on the BDoc behind", "How the structure of the BCP is actually determind", ...
    Did I missed anything?
    Thank you for your help,
    Andreas

    Great howto Steve! This further increased my understanding of the MVC patterns used by BC4J.
    Some remarks:
    [*]Select New Business Components...
    This should be 'New Business Components Package', or you won't be able to add business components.
    ename as "Name",
    sal as "Salary"
    from emp
    where empno = ?That should be deptno.
    [*]Select the EditEmpsInDepartment view objectThat should be EmpsInDepartment.
    Greetings,
    Ivo

  • InfoPackages Missing in Project Systems Business Content

    Hi all,
    Just installed PS business content in a BW 3.5 system.  Cubes, ODS's, etc are all OK.  But should there be InfoPackages supplied?
    Thanks!
    Gerry.

    Gerry
    Welcome To SDN
    Usually we will create our own info Packages based on our requirements like what cubes or ODS it should load also it is Delta/init/full. All these settings could be done in our info Packages based on our requirements.
    Hope this helps
    Thnaks
    sat

  • Missing datasources when installing Business Content

    Hi All
    We have a requirement for a number of SBC infoproviders (BI7/ECC6) which are new to us.
    The majority we have installed successfully but we are having problems with 0SLL_C01 / C02 and C03 which relate to Customs and 0BVTSD02 which is a Telephones Sales Acitivity DSO from the Beverage Industries area.
    We have 'successfully' installed all the data flows down to the infosource level but none of the datasources were installed.
    On re-checking in our source system RSA5/RSA6 we realised there were no datasources available for these infosources.
    How do you add business content datasources to your source system so they are available? or have we missed a process?
    Thanks
    Jerry

    Hi Jerry,
    The Datasource you are talking about is related to release of SAP GTS 3.0  pack.
    So please check with you basis team whether they have installed this plug-in in your source system.
    If these release /plug-in are not installed in your sourcce system you wont be able to finf it in the RSA5/RSA6.
    Thanks and Regards
    Arun

  • Steps to correct transport that had missing info object

    Experts,
    I had tranpsorted Material Master data after enhancement and realized that I missed to add custom info object in transport (BW). This transport come with Error 8 in QA. Now, I have transported missing object to QA with new transport request. Mw trasport in R/3 and data source replication were good. Currently, Transfer structure and 0Material are inactive. I would like to know steps to correct my tranport best possible way. Can I do repair or reimport my first transport? Please advice. Thanks.
    Regards,
    NP

    I will suggest to collect them again in a new request and transport.
    Ravi Thothadri

  • Need info on CRM Business Content extraction

    I'm working on extraction of Standad CRM Objects for reporting Telecom KPI's etc...plz help me with the best way forward.

    Hi Nishant the link below summarizes your concer..
    http://help.sap.com/bp_biv335/BI_EN/index.htm
    Further look if the Business COntent are standard SAP business contents, then simply form an RFC connection between the BW(R/3) Server and CRM server.
    Transport the objects to CRM Bus Content repository and then activate them for use as required for Object modelling.
    You can form Telecom KPI based standard reports like Churn,Profitability etc from such objects..
    Further refer to following links..
    CRM business content
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0ec3252-f21c-2a10-3c8d-b9ef05f839ef
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0ec3252-f21c-2a10-3c8d-b9ef05f839ef
    BW- CRM

  • Need info about production business content to use.

    Hi,
    I am currently using 2LIS_04_P_MATNR to get details of production order. This data source gives me the details of total quantity produced on the final posting date (ie. the date on which total quantity produced is confirmed).
    eg. If quantity requested is 10 and 1 PC is produced on 27.07.2007 and 2 pc produced on 28.07.2007 and 7 pc produced on 29.07.2007. This data source gives me the information as 10 quantity (127) produced on 29.07.2007
    I need all 3 lines (ie.1 PC against 27.07.2007 and 2 pc against 28.07.2007 and 7 pc against 29.07.2007 ) into BW. This information is available in AFRU table.
    I tried all possible solutions that i could manage with the current datasource that i use, but could not find any.
    Could someone suggest some other production data source which i can use to achieve this information ?
    Thanks in advance,
    Somenath

    Hi,
    I am currently using 2LIS_04_P_MATNR to get details of production order. This data source gives me the details of total quantity produced on the final posting date (ie. the date on which total quantity produced is confirmed).
    eg. If quantity requested is 10 and 1 PC is produced on 27.07.2007 and 2 pc produced on 28.07.2007 and 7 pc produced on 29.07.2007. This data source gives me the information as 10 quantity (127) produced on 29.07.2007
    I need all 3 lines (ie.1 PC against 27.07.2007 and 2 pc against 28.07.2007 and 7 pc against 29.07.2007 ) into BW. This information is available in AFRU table.
    I tried all possible solutions that i could manage with the current datasource that i use, but could not find any.
    Could someone suggest some other production data source which i can use to achieve this information ?
    Thanks in advance,
    Somenath

  • Installing the Business Content Objects from R/3 in to BW

    From R/3 system with RSA5 (Installation DataSource from Business Content), I have selected 0PF_FUND_ATTR (Pension Fund in Personnel Management) and clicked the 'Transfer DataSource' and it was successful. Then I have logged on to BW and 'Replicated the DataSource' for Pension Fund Master data and I could see my new DataSource '0PF_FUND_ATTR' after the replication under R/3 Client Source System. I went to the list of Info Objects (AWB -->Business Content --> Object Types --> Info Objects --> Selection --> Input help for Metadata) and I didn't find my new 0PF_FUND_ATTR in the list. If I find it then could click the 'Transfer Selections' button at the bottom and I could 'INSTALL' it afterwards.
    Why I am not able to see '0PF_FUND_ATTR' in the list of InfoObjects and what was the problem. Could you please help me. Thanks in advance.

    Hi Venkat,
    Please try not to double post your question. It is the same group of people on all forums. I have given you a detailed answer on the other question, please look at it.

  • Install Info Objects

    How to install all Info Objects from Business Content to BW at a time?

    Hi Ganesh,
    I think, it is not possible to select all the infoobjects at a time from BI content, however you can select and install Infoobject catalogs with Indata flow before and install the infoobjects.
    By doing this, you can install a set of info objects at a time.
    Hope this helps.
    Thanks = Points in SDN
    Rgs,
    I.R.K

  • How to remove Business content objects that are not required?

    Hi all of you,
    I had extracted some of the objects from business content from FI such as General LEdger and Asset Accounting. After extracting it, my c drive is full and I am not able to open any other file. So I want to remove these FI objects that I had extracted from Business Content. Can any one please guide as to how should I remove these already loaded Business content objects?
    Thank you.
    TR.

    Hi,
    You can right click on the objects (unused) and delete.
    actually when you activate business content its version is changes from "D" Delivered to "A" Active but these objects will always be available as D version to you. Even if you delete the activated objects now & need those in future you can reactivate them.
    hope it helps
    Regards
    Vikash

  • Turning Business Content on a Test/QAS Box

    I have turned on Business Content on our BW DEV box for CRM.  Can I turn on the same Business Content on our BW QAS box and remap?
    My issue is that the transports of the business content turned on for CRM in DEV Opportunities ODS, InfoCube, and Info Objects are giving me errors when I import to QAS regarding missing info objects that should be linked by business content when it was turned on. 
    Time crunch.

    hi,
    the 'normal' way is via transport.
    please collect these missing infoobjects in BW Dev and transport to BW QAS.
    you can use ods or infocube as starting point,
    rsa1->transport connection->left panel choose 'object type' and middle panel choose infocube/ods and 'select objects' and 'transfer', it will go to right panel,
    use collection mode 'manual' and grouping 'only necessary objects', execute. after objects collection finished, expand the infocube/ods, and make sure these missing objects are there and marked. create request and transport then transport again the previous error request.
    hope this helps.

  • Business Content - Do not merge with Active version

    Hi,
    I am activating an infosource from BC, which in turn is activating many Info objects.
    My problem is that we made some modification to the info objects, for example remove and add attributes etc..
    Now it seems that when activating the BC info objects again it will merge the Active version with the BC version. Therefore, undoing most of the changes.
    Is there away to leave the active info objects alone and only install the missing info objects ?
    Thanks

    Thank you for the prompt reply,
    This is exactly what I am doing ,I select the active version ,, but I get the following message :
    Object Info Object 0AMOUNT: Merge with the Content Version
    The versions (A and D) of Info Object 0AMOUNT agree
    I am only doing simulation. But I need to be sure that the info objects will not be merged with the extra attributes etc..
    Thanks

  • Activate Update Rules from Business Content

    Hello,
    I am trying to install 0QM_C10 from business content. Every thing works fine except there are no update rules (there are 3 info sources for this cube). I am new to this and it doesn't make sense for me to manually create (ofcourse the system does the proposal) update rules. Since that is lot of work. I was expecting some transaction / tool where I can activate the update rules from the Business Content (since I can see the update rules in the business content under "Display Description". Is there any tool like that?
    Or, am I doing some thing wrong so the update rules are not automatically installed from the business content along with Cube and info sources?
    Note: I did separate installation for cubes as well as info sources from business content using Grouping by "Only necessary objects" option.
    Thanks in advance.
    Bala
    Message was edited by: Bala Lingamaneni
    Message was edited by: Bala Lingamaneni

    Bala,
    please don't uncheck the checkbox that you find when you open a new thread (let it as default!)...this is the only way to be able to assign points to your helper !
    Write a request (as a normal post) into SDN Suggestion forum in which you ask to Marc Bernard or Mark Finnern to convert this post as question !
    Bye,
    Roberto

Maybe you are looking for