Missing "Manage Connections" icon

Hi,
  For some reason the "Manage Connections" icon is missing from my BB menu.  I did a "Show All", but it still isn't showing anywhere.  The only way for me to get into this app is to assign the right side button to the "Manage Connections" app via the "Screen/Keyboard" options item. 
  Any idea how to get this icon back on my menu?
Thanks!
Solved!
Go to Solution.

1. Look in EACH folder on your device... Applications, Instant Messengers, Downloads, etc.
If you still don't see it, look at Options > Advanced > Applications. Do you see it listed there?
2. It can be theme dependent. What theme are you running? Try changing themes (options > Themes) and see if you see the icon.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Missing internet connection icon in taskbar

    Missing internet connection icon in taskbar windows xp 8250

    A system restore will not do it, you would have to do a full system
    REPAIR.
    If you copy Just the keys above and past them into notepad and save them to your desktop as any name you want, just make sure they have a *.reg extension, then double click on them and the keys will be added to your regristry.  There are two keys above
    so make two *.reg files.
    This will make one file:
    [HKEY_CLASSES_ROOT\CLSID\{7007ACCF-3202-11D1-AAD2-00805FC1270E}]
    @="Network Connections Tray"
    [HKEY_CLASSES_ROOT\CLSID\{7007ACCF-3202-11D1-AAD2-00805FC1270E}\DefaultIcon]
    [HKEY_CLASSES_ROOT\CLSID\{7007ACCF-3202-11D1-AAD2-00805FC1270E}\InProcServer32]
    @="C:\\WINDOWS\\system32\\NETSHELL.dll"
    "ThreadingModel"="Both"
    This will make the other file:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{7007ACCF-3202-11D1-AAD2-00805FC1270E}]
    @="Network Connections Tray"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{7007ACCF-3202-11D1-AAD2-00805FC1270E}\DefaultIcon]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{7007ACCF-3202-11D1-AAD2-00805FC1270E}\InProcServer32]
    @="C:\\WINDOWS\\system32\\NETSHELL.dll"
    "ThreadingModel"="Both"
    When the key's have been added to your registry you must reboot for them to take effect.
    Remember, these keys are for XP, do not know about other OS's
    Brogan2

  • OLAP connection icon missing in CMC homepage

    Dear All,
    A problem i am facing recently, may be any f you can help.
    OLAP connection icon is missing from CMC home page. No CONNECTION ICON in drop down box.
    As a result , secured connections can not be retrieved.
    and universe are not opening, and reports are not refreshing as well.
    I am using BI 4.0
    Can any one help?
    Kind Regards,
    Sohaib Khan

    Point the CMS to another empty schema (new Db). Login to CMC and check whether the
    OLAP connection icons are visible.
    There is a possibilty that the CMS Db might have got some corrupt entries.
    Was there any kind of SP / Patch upgrade activity performed for BO. Or else an upgrade activity in the CMS Db level?
    Perform a RDT scan to know the inconsistencies. Refer the below:
    How to browse CMS repository - Business Intelligence (BusinessObjects) - SCN Wiki
    How to use Repository Diagnostic Tool - Business Intelligence (BusinessObjects) - SCN Wiki

  • I am missing the internet connection icon under my systems.  How do I get it back?

    I am missing the internet connection icon under my systems.  How do I get it back?  I am trying to eliminate an unvalid gmail account and add my new gmail account for work.  It exists already so I don't want to create one.  I can't get my computer to switch from the unvalid account.  Per YouTube I need this application to set up Safari to switch between accounts.   Help please!

    If you are on a Mac, you can connect to a network either using WiFI or an Ethernet cable. These are both available under System Preferences.
    What are you referencing as 'Internet' connection?

  • Norton Manage Logins Icon is missing with Firefox 4.0. My auto logins no longer work

    Norton has a manage logins icon that has disappeared from my toolbar when I updated to Firefox 4.0. Additionally, the Norton auto login function has stopped working, even though it appears fine when I look at the function in Norton.

    Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have released an update for Norton 360 to make it compatible with Firefox 4, for details see http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
    I do not know about other Norton products, but if you run Norton LiveUpdate it should inform you if there are updates available. If no updates are available, you can downgrade to Firefox 3.6 if you want to use the Norton add-ons.
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • Manage connections disabled

    Hi,
    We are in SAP BOBJ 4.0 sp04 patch 4.9 and crystal reports for enterprise 4.0 client installed in win 7.
    While opening an existing CRE report not able to change the manage connections/ select any connections, please see the attached image.
    1) Please advice, If its access rights issue or needs to remap obects and save report it in our name.
    2) Cannot even open a locally saved CRE report, Is something missing while saving local copy ?
    Please advice.
    Regards,
    Venu. K

    Hi,
    I think it an issue with the License keys.  Check out what all features does your License Key support.
    I had a problem where I wasnt able to see all types of connections, only few of the connections (QaaWS & Live Office etc) were visible and it was a License issue.

  • E52 fw 031.012 3g data "connecting" icon always on...

    Since the last update of my E52's firmware, the 3G connecting (not "connected") icon - which is the one with the dotted 2-way arrow under the signal meter - is always shown on the screen. I have no applications running in the background (as the task manager says). I have disabled all the internet synchronisations and the icon is still there, from the moment I power-up my phone.
    This doesn't cause me any problem (apparently), but I was wondering if that is normal. Other than this, all applications that use this kind of connection work fine. They connect through 3g (the icon goes to full 2-way arrow), they do their job and then they disconnect and the connection icon goes back to the "connecting" state.
    I have also tried to force the phone to close all active data connections, by keeping the hang-up button pressed for a few seconds, but nothing happens.
    Any idea?
    Solved!
    Go to Solution.

    Hi, try this
     control panel>>settings>>connection>>packet data >>
    change the packetdata connection to when need, it could be on the when available setting.
    If you like my post kindly hit the Green Star Button on the left.
    Nokia Phones owned: 3310, 8310, 7650, 3650,7210,6230, 6630, 6600,6100,6610, 6610i, 3230, 8800, 5700XM, E52 (only Nokia phones)

  • "Manage Widget" Icon gone

    Hello,
    I accidently removed the "manage" widget icon from my dock. Not the "dashboard" icon which displays which widgets you currently have active but this one (just the round icon, not the background:
    It came loaded on the dock when i got the laptop and I actually thought it couldn't be removed. Anyway, thanks in advance for any advice or answers

    That's not a good sign, I get...
    I guess you could Try making a new Folder there called Resources & putting that file in there.
    But I'm worried how this could go missing...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Reboot & see if it's there now.

  • Win7 Home Premium - systray Wireless network connection icon?

    Hi,
    My home wireless connection is running fine and I do not have my Ethernet cable plugged in.
    In the systray part of the taskbar, there used to show a Wireless network connection icon - a little graphic icon that looked like 5 vertical bars side-by-side, with bars increasing in height, left to right.  That icon is no longer in the systray and
    it appears to have been replaced by the "wired" icon - a little square with a tiny picture of a plugger on its left side.  And since I don't have my Ethernet cable plugged in, there's a little red "x" on the wired icon.  I don't
    know what I did to cause the wired icon to replace the Wireless network connection icon in the systray. Any idea how I screwed this up and how to put things back again?

    Hi cwr64,
    It might be caused by netsh command using. Please try following methods
    Method1: Uninstall all “6to4 Afapter” and “isatap” device in device manager.
    Right click this computer->Properties->Device manager->View->show hidden devices
    Right click and uninstall all “6TO4 Adapter” and “isatap” devices in
    Network adapters.
    Method 2
    Please try to uninstall all your network adapter driver and reinstall them again. Then restart your computer check if the icon comes back. It might be caused by netsh command using.
    Note: backup or download your adapter driver before removing the drivers from device manager.
    Regards

  • Manage Connections No green checkmark next to wifi??????

    I just got my 8900 and am trying to connect it to my wifi at home.  I have set up the wifi network, scanned and input my WEP key.  My 8900 says it was successful and i get the light gray wifi and the name of the network but the wifi(on the home screen) never gets brighter and I never get the green checkmark on the manage connections page(only a white dash).  Can any one help?  I have been reading threads for the past two days and have not found a reference to this.  I do not have a data plan and I am on At&t. 
    On a related note how would I know if I am using At&t's pay network for the internet or if my 8900 is using wifi?
    Any help or links would be greatly appreciated.  
    Thanks,
    Micki

    1) Is it possible your WiFi router is blocking your access?  You can be connected to your WiFi router, but not to the Internet!
    2) Are you manually assigning your BB an IP Address, or letting your router assign it automatically?
    a.  If you're letting your router assign your BB an IP Address automatically, is your router correctly set up to do that?
    b.  If you're assigning your BB an IP Address manually, did you specify the default IP Address (usually 192.168.1.x where "x" is a number 1-255 which doesn't match any other device on your network), DNS Server, and Gateway (the latter two are usually identical, 192.168.1.1)?
    If using a dynamically assigned IP Address, try setting it manually on both the BB and the router.
    I always assign all the computers on my home network their own IP addresses.  It helps cure all kinds of problems!

  • Missing email folder icon on BBT 9800 - Where did it go and how to return it back?

    Missing email folder icon on BBT 9800 - Where did it go?
    The email icon on my BB Torch 9800 just disappeared. If I type email in the search button it shows me the greyed out email icon but I can't get the icon back on to my homescreen. How do I get my email icon back? And Unhide All is not an option so icant find it.
    Please consider the above on urgent basis as I can't see my work mails.
    Thanks,

    Hi hegazysource and welcome to the BlackBerry Support Community Forums!
    Are you using the BlackBerry® Internet Service or BlackBerry® Enterprise Server to receive your email on your device?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Cannot find Internet Connect Icon

    I am using Leopard 10.5.4.
    I want to setup a VPN connection and found an article which describes how to go about setting the VPN connection. But it uses Internet Connect icon and according to the article it is found in the 'Applications' folder. I cannot find the 'Internet Connect' icon in Applications.
    Please can someone help ?
    Zapp

    Internet Connect has (thankfully) been removed from Leopard. You can now set up a VPN with the Network Preferences. Click on the + icon below the list of network services to get a window with popup menu that has VPN as one of the interface choices.

  • Cannot acquire a managed connection

    Dear All,
    I am very new to the SSIS package development so please point out my stupidity If I have done any. I am trying to ETL data from excel spreadsheet to SQL server using Excel data connections and OLE DB and ADO.Net data connection. I am using CDC task to monitor
    any changes done in the source excel file. I am doing it in a way same package extract information from the spreadsheet and import in to Server 1 (CDC enabled) and compared it to the same table hosted on another server 2 which is a production server.
    When I run this package on DTS it runs fine and I am able to generate Deployment Manifest file. When I try to run the same Manifest file I am getting below error
    Error: Failed to Decrypt an encrypt XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information.
    Error: Cannot acquire a managed Connection from the run-time connection Manager
    I have change the package encryption level from "EncryptSensitivewithUserkey" to "EncryptsensitivewithPassword" and have added password to the PackagePassword it the package property and saved this project.
    when i add this package to the SQL agent job I am still getting below error message
    Message
    Executed as user: administrator. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  11:44:49  Error: 2014-12-04 11:44:52.10
        Code: 0xC020801F     Source: CDC Control Task CDC Control Task     Description: Cannot acquire a managed connection from the run-time connection manager.  End Error  Error: 2014-12-04 11:44:52.10     Code:
    0xC0024107     Source: CDC Control Task      Description: There were errors during task validation.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  11:44:49  Finished: 11:44:52
     Elapsed:  2.215 seconds.  The package execution failed.  The step failed.
    Please help I am stuck on this issue from last 2 days now. If you need more info please let me know.
    regards
    JK

    Looks like you run the package in thee Agent for this purpose you should use the 'Rely on server storage for encryption' (ServerStorage) protection
    In the "EncryptsensitivewithPassword" scenario you need to provide the actual password by editing the command line in there:
    with adding switch /De <password> to it
    Arthur
    MyBlog
    Twitter

  • Could not create a managed connection manager ; SSIS package from SSMS - Windows 7 64 bit

    I created connection as Oracle provider for .Net.
    In data flow, using the ado net source. select data access mode as SQL command.
    When click preview. data is coming.
    But when right click the dataflow task --> execute task.
    data flow is failed with following error
    [ADO NET Source [1]] Error: Microsoft.SqlServer.Dts.Runtime.DtsCouldNotCreateManagedConnectionException: Could not create a managed connection manager. at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String
    connStr, Object transaction) at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction) at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100
    wrapper, Object transaction)

    Do you run it under 64bit?
    if yes, go to Project menu, select project properties.
    in the project properties window, go to Debugging tab, and set Run64BitRuntime as false. and try again.
    http://www.rad.pasfu.com

  • Managing Connections in a desktop Application or Applet

    Wondering how people usually manage connections in a fairly large GUI application (or Applet).
    I'm used to using a Connection Pool with Servlets.
    Is this worth using with an Application or is it ok to create a Connection at startup and use it throughout the whole execution?
    Is it ok then to pass references to this Connection to other classes in the application?
    Any tips, experiences, guidelines would be appreciated.
    Thanks.
    Derek

    Hi
    I'm assuming that you are using a J2EE Application Server that implements datasource pooling if you have the ability to use Pooled Connection with your servlet (if not, then you must have created your own connection pool?).
    Basically, if you have an Applet, then there is no reason to change your current way of working...simply let a servlet in your container handle the database stuff, then return the results to the Applet.
    For desktop standalone applications, things are a bit different. You will probably have to implement your own pool. Best practices...hmm...not an expert but I would have thought it best to open the connection, do the SQL stuff, then close it straight away, and in doing so release the connection back to the pool for another application to use (assuming you have a pool). If you are thinking about opening a connection for every application and holding these indefinitely, then you will eventually run into trouble. How many connections can your database handle???
    Hope that helps

Maybe you are looking for