Missing  master data for Account number Delta

Hi,
I am working on production system,Some records are missing master data(attributes street,city for Account number  for starting with Account number   9xxxxxx) for Delta load,Field lenguth is 10.these Missing  records are getting loaded with full load or full repair.but I want to load load with regular delta load.Every day I am getting records with other Account number start with 1 to 8.and load is fine. Problem with only Account number   9xxxxxx.
Please help me whats the problem,where can i find related info.how to fix this issue.
Is there any delta setup problem
This generic data source ,pulling from table ADRC….numeric pointer.

Hi ,
Please check at source sytem side in RSA3 whether you are able to loacte the data with the mentioned account number............
please post your reply to proceed further
Cheers,
Swapna.G

Similar Messages

  • Missing some master data for delta load( its very urgent please)

    Hi,
    I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
    the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
    Address Number/     Addr Ln 1 Txt/     City Dstrct Nm
    9025750333/                      #/               #     
    help me its very urgent

    Hi Sumanth,
    check the delta queue and the V3 job is it running correctly ,
    Have a look at OSS note :728687
    and also see the following thread
    Deltas are not available in Delta que
    Delta Queues are not cleared in R/3
    No data in RSA7 for 2lis_03_bf : HELP
    check the data may b it is in modifide status not active.
    regards,
    supriya

  • Custom master data for Sales Document Number

    Is it possible to create master data for "sales document number" as a custom field and/or table in R/3?  We have a need to record the "end user" customer of an order but this data may be updated a long time after the order and sale is complete.  IT seems that loading to BW/BI may be simpler if this is treated as document attributes rather than transactional data since no delta will be trigger by changes to this field.  Does anyone have experience with this approach?

    Hi,
    it is possible to create attributes for this InfoObject. Add the Attributes you need in BW. You can use the attributes even if the sales doc is line item dimension of your cube.
    On Sourcesystem side you have to create a generic extractor in SBIW. I think a table view on VBAK or VBAP may fullfill your needs. Of course the tables are not the smallest ones but maybe u can use the timestamp to implement a generic delta. Check whether the timestamp is set when the 'end user' is set. Not every change in the sales document leads to an entry in the delta queue of logistic, but the timestamp should be set.
    After that replicate the datasource to BI and connect it to the attributes of 0SALES_DOC
    I had a similar enhancement at one customer reading the actual transport routes to the sales documents and it worked fine.
    Hope that helps
    Christoph Vortkamp

  • What are the T-codes that contain the master data for material and vendor?

    what are the T-codes that contain the master data for material and vendor?

    hi ,
    - Display Material  tcodes...
    MM01 - Create Material
    MM02 - Change Material
    MM03 - Display Material
    MM50 - List Extendable Materials
    MMBE - Stock Overview
    MMI1 - Create Operating Supplies
    MMN1 - Create Non-Stock Material
    MMS1 - Create Service
    MMU1 - Create Non-Valuated Material
    ME51N - Create Purchase Requisition
    ME52N - Change Purchase Requisition
    ME53N - Display Purchase Requisition
    ME5A - Purchase Requisitions: List Display
    ME5J - Purchase Requisitions for Project
    ME5K - Requisitions by Account Assignment
    MELB - Purch. Transactions by Tracking No.
    ME56 - Assign Source to Purch. Requisition
    ME57 - Assign and Process Requisitions
    ME58 - Ordering: Assigned Requisitions
    ME59 - Automatic Generation of POs
    ME54 - Release Purchase Requisition
    ME55 - Collective Release of Purchase Reqs.
    ME5F - Release Reminder: Purch. Requisition
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MBRL - Return Delivery per Mat. Document
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB1B - Transfer Posting
    MIBC - ABC Analysis for Cycle Counting
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI21 - Print physical inventory document
    MI04 - Enter Inventory Count with Document
    MI05 - Change Inventory Count
    MI06 - Display Inventory Count
    MI09 - Enter Inventory Count w/o Document
    MI34 - Batch Input: Enter Count
    MI35 - Batch Input: Post Zero Stock Balance
    MI38 - Batch Input: Count and Differences
    MI39 - Batch Input: Document and Count
    MI40 - Batch Input: Doc., Count and Diff.
    MI08 - Create List of Differences with Doc.
    MI10 - Create List of Differences w/o Doc.
    MI20 - Print List of Differences
    MI11 - Physical Inventory Document Recount
    MI07 - Process List of Differences
    MI37 - Batch Input: Post Differences
    for vendor..
    XKN1  Display Number Ranges (Vendor)
    XK01  Create vendor (centrally)
    XK02  Change vendor (centrally)
    XK03  Display vendor (centrally)
    XK04  Vendor Changes (Centrally)
    XK05  Block Vendor (Centrally)
    XK06 Mark vendor for deletion (centrally
    XK07  Change vendor account group
    XK11  Create Condition
    XK12  Change Condition
    XK13  Display Condition
    XK14  Create with cond. ref. (cond. list)
    XK15  Create Conditions (background job)
    reward points if useful,
    venkat.

  • Master data Full load to Delta load

    HI
    I have Order number (ZONDRNO)for this we are loading the Master data form BW  to BW full load.
    This Order number is Generi Data source
    Can any one help me how to do master data Full load to Delta load.
    Thanks in Advance
    kumar
    Edited by: kumar reddy on Oct 9, 2008 3:14 AM

    Hi,
    Firstly you are stating that you are loading from BW to BW. How are you doing it ? Are you doing through a datamart ?
    Secondly you have also told that you have created a generic datasource so from this we can deduce that you are not doing a datamart load but you are doing through a datasource.
    Thirdly to achieve delta for a generic datasource you should make sure that the datasource in question here is delta enabled.
    Once all these are done all you need to do is a delta init and schedule further delta loads.
    Regards,
    Pramod

  • Master data for 0Material

    Hi Gurus,
    Can I do a full upload for master data for 0Material attributes daily even if there are no new records addded in R/3.
    Please confirm me.
    Thanks in advance.
    Regards,
    Venkat

    Hi Kiran,
    Check whether the Data is in large number and the Depends on the frequency of changes.
    <b>As Master Data just Overwrites the existing data</b>(no duplication error comes), go with full load if the data is in small quantities , and better to choose delta for these type of Master Data
    Hope this helps,
    Sudhakar.

  • Add additional field in Vendor master data for VAT Reg. No.?

    Add additional field in Vendor master data for VAT Reg. No.?
    Hi I need to add one additional field for other VAT Reg. number in vendor master data FK01, We currently have two field
    Current Settings:
    Country : LFAS-LAND1
    VAT registration no.: LFAS-STCEG
    I need to add one additional field for text information. Is this possible?
    Thanks you very much
    Luis G.

    If you want to add new fields that are not possible from config (check with your consultant) you need to implement BADIs
    In SPRO, go to:
    >Logistics-General
    ->Business Partner
    -->Vendors
    --->Control
    >Adoption of Cusomter's Own Master Data Fields
    and read the documentation provided there.
    You will need to implement following BAPIs
    Processing Master Data Enhancements: VENDOR_ADD_DATA
    Customer Subscreens: VENDOR_ADD_DATA_CS
    I am not aware of any other way to add new fields to Vendor master (however, check with your consultant for config related screen modifications)
    Should you need any further info to implement it, post back (read it thoroughly first, it's quite self-explanatory).
    regards,
    Aabhas

  • BW Master Data for Customer Exit Variable Reference

    Good day Experts,
    I have several queries that I would like to remove the hard coding of values on to prevent yearly maintenance. In these queries there are two conditions each condition is on different key figures that is amount by year.  The query is only to report on data that for the two amounts (separated by year) is greater than the specified values. I want to change the condition so the value is no longer hard coded so the query will role automatically as the time period changes. The year amount values that the condition will need to reference are not currently stored in our BW system. I would like to create master data that is maintained directly in the BW system for the amounts that a variable for the condition in the query can then access.
    I know it can be set up as master data and then referenced through a customer exit variable but when I set up the master data if I do the Amount as a key figure I cannot maintain the key figure value for the master data manually in BW, if I set the Amount up as a numeric characteristic then I canu2019t directly use a decimal. Am I missing something in the key figure setup then referencing the key figure as an attribute of the year value or do I need to do it as a characteristic and use a conversion routine or something for data manipulation?
    Can someone please give me some guidance to what the best way to do this is?
    The data necessary master data for storage in BW is the YEAR and a single dollar value:
    For Example:     
    Year          Amount
    2009           101.50
    2008          207.80
    2007          807.40

    I figured out that I can use an amount in the master data and maintain the amount manually as long as I use the amount with a currency instead of setting the currency in the key figure.

  • How to create customer master data for walking customer in retail

    hi experts !!!!!!
    for retail industry e.g books trading industry
    how to create customer master data for walking customer in retail
    its dummy or one time customer
    if i create one time customer then same customer number can i use for every new order and every new customer how ?????
    thanks

    Dear Hanumant,
    As per my view,,
    You can use one time customer functionality to full fill your requirement.
    When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
    Same one time customer number you can use for every new order through maintaining different data.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

  • Calculation of difference of wages types master data and accounting cluster

    Hi, I am developing a ABAP HR report for calculating the difference of wage types master data and accounting data and in the output i need to display the fields like
    • Officer in-charge of payroll accounting
    • Officer in-charge of Support
    • Officer in-charge of time recording
    also from where I could get the accounting cluster data for the wage types
    I want to know from where I can get these fields and how ther are related with wage types.

    Check through PA30,there are different infotypes by which these data are maintained in the Employee Master.

  • Difference of wages types master data and accounting cluster data

    Hi, I am developing a ABAP HR report for calculating the difference of wage types master data and accounting data and in the output i need to display the fields like
    • Officer in-charge of payroll accounting
    • Officer in-charge of Support
    • Officer in-charge of time recording
    I want to know from where I can get these fields and how ther are related with wage types.

    Hi Luo
    As per below link
    How to... MDG-M: Use the Data Import Framework | SCN
    The IDoc doesn't support flex entities, as they don't write into active area. Therefore, the DIF can only be used to load reuse entities in staging or active area.

  • Master data for finance

    can anyone please tell me what are the master data tables for finance?
    Cheers
    Troy

    Hi Troy,
                 Following tables are IMP from FI/CO point of view.......
    Master data
    SKA1               Accounts
    BNKA                   Bank master record
    Accounting documents // indices
    BKPF               Accounting documents
    BSEG               item level
    BSID                   Accounting: Secondary index for customers          
    BSIK              Accounting: Secondary index for vendors            
    BSIM              Secondary Index, Documents for Material            
    BSIP                  Index for vendor validation of double documents    
    BSIS              Accounting: Secondary index for G/L accounts
    BSAD              Accounting: Index for customers (cleared items)  
    BSAK              Accounting: Index for vendors (cleared items)    
    BSAS             Accounting: Index for G/L accounts (cleared items)
    Payment run
    REGUH          Settlement data from payment program
    REGUP          Processed items from payment program
    CO :
    TKA01               Controlling areas
    TKA02               Controlling area assignment
    KEKO               Product-costing header
    KEPH               Cost components for cost of goods manuf.
    KALO               Costing objects
    KANZ               Sales order items - costing objects
    Cost center master data
    CSKS               Cost Center Master Data
    CSKT               Cost center texts
    CRCO               Assignment of Work Center to Cost Center
    Cost center accounting
    COSP               CO Object: Cost Totals for External Postings
    COEP               CO Object: Line Items (by Period)
    .COBK               CO Object: Document header
    COST               CO Object: Price Totals
    Company code
    T004               Chart of accounts
    BNKA               Master bank data
    T077S               Account group (g/l accounts)
    T009               Fiscal year variants
    T880               Global company data
    T014               Credit control area
    Fi document
    T010O               Posting period variant
    T010P               Posting Period Variant Names
    T001B               Permitted Posting Periods
    T003               Document types
    T012               House banks
    T007a               Tax keys
    T134               Material types
    T179               Materials: Product Hierarchies
    T179T               Materials: Product hierarchies: Texts
    TJ02T               Status text
    TINC               Customer incoterms
    TVFK               Billing doc types
    T390               PM: Shop papers for print control
    Please reward points if helpful........
    Thanks
    Kaushik

  • Master data for asset management ?

    hi all,
       i am new to asset accounting ...can any one guide me what are all the master data for asset management

    hi,
    As far as my knowledge
    i can tell u only two master data.
    that is
    1. Asset Master record
    2. sub asset master record.
    I have conversated to FI consultant... he is saying these two master data are only available in Asset accounting.

  • Master data for warehouse management

    Hi experts what are the master data for the warehouse
    management module.............

    Hi
    Sending you all the table for the warehouse mangement.
    Inventory document
    IKPF Header: Physical Inventory Document
    ISEG Physical Inventory Document Items
    LINK Inventory document header in WM
    LINP Inventory document item in WM
    LINV Inventory data per quant
    Storage locations and stocks
    LAGP Storage bins
    LEIN Storage unit header records
    LQUA Quants
    LQUAB Total quant counts for certain strategies
    MEIK Make-to-Order Stock for Customer Order
    MSCA Sales Orders on Hand with Vendor
    MSKA Sales Order Stock
    MBPR Stock at Production Storage Bin
    MLGN Material Data per Warehouse Number
    MLGT Material Data per Storage Type
    Rewards if useful.
    with regards
    Nikunj Shah

  • Error in determining country specific length for account number

    Cannot determine country-specific length for account number;No instance of object type AccountClosureAM has been created. External reference: 0271409168GTABNGODUMMY00USDGO

    Thanks KI & Sujit
    Can you please tell me the Menu Path for OB40
    I have one another problem as below
    Jurisdiction code not defined for procedure TAXINN
    Message no. FF748
    Diagnosis
    You have entered a jurisdiction code in a country whose calculation procedure does not allow the entry of jurisdiction codes.
    System response
    Procedure
    Check and, if necessary, correct the entry.
    Procedure for System Administration
    If it is not an input error, check and possibly change the system settings.
    To do this, choose Maintain entries (F5).
    Change your calculation procedure so that tax calculation is carried out using the jurisdiction code.
    Can you please tell me how to solve this.
    Rakesh

Maybe you are looking for