Missing package metadata
Hello, I'm trying to install package-query with the command,
pacman -U http://mir.archlinux.fr/~tuxce/releases … 1.1.tar.gz
However, it installs and gives the error
missing package metadata in /var/cache/pacman/pkg/package-query-1.1.tar.gz
Then it says that that file is corrupted. I tried this for other things in the aur and it does the same thing.I'm running a base install and this is literally the first file I'm downloading, please help.
First that url is incorrect, I think you mean http://mir.archlinux.fr/~tuxce/releases … 1.1.tar.gz
Second, even the correct url just gets the source code, not a package. And I suspect anything you tried to get off the AUR was just the compressed files needed to build a package, unless you also ran makepkg to build something.
I suggest taking a look at the wiki page
Similar Messages
-
Missing packages in Software Update
Hello,
I wanted to report a problem with software update. We have multiple different T540p models here at work, some are i7s and some are i5s. We do a fresh clean install of Windows to remove all of the bloatware, then run system update to fetch all of the drivers. The i7 models pickup all of the drivers fine, while the i5 models are missing some software packages. I believe system update works by associating your machine type/id with the backend. It will then give you a list of all of the drivers/software required for your system.
The only missing package I noticed is the Hotkeys Features Integration with 8.1 . I know this can be downloaded manually but wanted to pass this along.
Product ID: 20BE004FUS
Serial # isn't needed
Thanks.When you say "FN Key Manager", are you talking about Hotkeys Features Integration, or something else?
Are you deploying Win7 or Win8.1? -
Missing package information on MyBT accounts
Missing package information on MyBT accounts
and after lots of phone call no one can fix it.
which department do i need to talk to.
and can i have a name of some one it that department so I can look them up in the Directory if not a name a EIN will do.I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Missing package... it's been 2 months and still no "refund"
Hi,
Sometime in late March/early April, I filed a missing package report for a pair of headphones I ordered online. Two weeks later, I called up Best Buy about the status of the order, and was told that UPS did an investigation and concluded that the package was lost.
Support told me they would credit me the amount back to my credit card in about 3-5 business days.
It's been two months. I haven't gotten a refund.
I'm not sure whether I should post my reference number here, but it seems like you guys are just stalling me. This is ridiculous. My credit card billing statement is due really soon, and I have an outstanding balance for a pair of headphones I didn't even receive.
Can someone PLEASE fix this for me? You guys have a very unprofessional, roundabout way of doing things. One of the support members I called acted as if she didn't even know what a reference number was.Hello jbtb07,
Welcome to the forum! After almost two months of trying to sort out an order issue, I can understand why you would be fairly fed up with dealing with this issue. I am sorry to hear that you may not have ever received the headphones, and that you are still trying to find a resolution to this.
Using the email address you registered with your forum, I was able to locate the order. It appears that a resolution was provided to you, and so I am sending you a private message with further details. You may check your private messages by signing into the forum then clicking the envelope icon in the top right corner of the page.
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message -
Missing Package(s), Installation Corrupted
Un Gusto saludarlos.
Queria pedir su colaboracion,
Descarge las Imagenes de VMware y tengo la licencia DEMO de DMS 5.3, instale dichas maquinas virtuales y no se genero ningun inconveniente, el DMM y en SnS, mas sin embargo al levantar dichas maquinas virtuales se me muestra el siguiente error: "
Missing Package(s), Installation Corrupted, algun concejo que me puedan brindar, intente instalarlo nuevamente en repetidas ocaciones y siempre obtengo el mismo resultado.
De antemano agradezco muchisimo su ayuda.
Exitos y bendiciones.}
Saludos.....
Adjunto imagen de errorHello jbtb07,
Welcome to the forum! After almost two months of trying to sort out an order issue, I can understand why you would be fairly fed up with dealing with this issue. I am sorry to hear that you may not have ever received the headphones, and that you are still trying to find a resolution to this.
Using the email address you registered with your forum, I was able to locate the order. It appears that a resolution was provided to you, and so I am sending you a private message with further details. You may check your private messages by signing into the forum then clicking the envelope icon in the top right corner of the page.
Respectfully,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message -
Missing package: SUNWbcp (SunOS 4.x Binary Compatibility)
I have downloaded the latest Free Solaris 10 8/07 for x86 and retrieve the following error message:
Missing package: SUNWbcp (SunOS 4.x Binary Compatibility)
when installing Business Objects Enterprise XI Release 2 Service Pack 2. I can't locate the package on neither the CDs nor the DVD I downloaded.
Any advise would be highly appreciated.
Many thanks.
Jurgs
Edited by: tzscl2 on Dec 12, 2007 12:52 AMI have downloaded the latest Free Solaris 10 8/07 for x86 and retrieve the following error message:
Missing package: SUNWbcp (SunOS 4.x Binary Compatibility)
when installing Business Objects Enterprise XI Release 2 Service Pack 2. I can't locate the package on neither the CDs nor the DVD I downloaded.
Any advise would be highly appreciated.
Many thanks.
Jurgs
Edited by: tzscl2 on Dec 12, 2007 12:52 AM -
Error: Missing packages: SAPKA71007 (SAP_ABA)
I am upgrading a SAP PI system from 7.0 SPS18 to 7.10 SPS8.
In the Configuration phase I get the error:
ERROR: Unable to generate package queue.
Return Code = 3, Reason = "Package SAPKA71008 : Import
prerequisites are not fulfilled"
Missing packages:
SAPKA71007 (SAP_ABA)
Check log file 'SPDA_PATCHINT.LOG' for details
However I can verify that the XML file that I specified in the upgrade
(T:\usr\sap\trans\EPS\in\SPSTab2.xml) contains the package name
SAPKA71007 and that references file name KA71007.SAR (files 1-8 are
referenced).
Any ideas why the upgrade tool seems to be unable to see the file KA71007.SAR ?
Thanks.No problem, it was worth looking at
No, the log doesn't mention anything useful, only:
1 ETN214X."**************************************************"
1 ETN250 Start of phase: "'Supp.Pack. Queue Calculation'"
1 ETN252 Start date: "10.08.2009"
1 ETN253 Start time: "11:52:05"
1 ETN214 ."**************************************************"
2 ETN243XCalculating the Support Package queue with the following input queue ...
3 ETN112 The OCS Package Queue is empty
3 ETN247 The calculation is based on the following software component vector:
3 ETN248 Component: "SAP_ABA" rel. "710", Support Package level: "0004" (component type "S")
3 ETN248 Component: "SAP_BASIS" rel. "710", Support Package level: "0004" (component type "S")
3 ETN248 Component: "PI_BASIS" rel. "2006_1_710", Support Package level: "0004" (component type "X")
3 ETN248 Component: "ST-PI" rel. "2005_1_710", Support Package level: "0003" (component type "X")
3 ETN248 Component: "SAP_BW" rel. "710", Support Package level: "0004" (component type "W")
3 ETN249 The following target vector shall be attained:
3 ETN248 Component: "SAP_ABA" rel. "710", Support Package level: "0008" (component type "S")
3 ETN248 Component: "SAP_BASIS" rel. "710", Support Package level: "0008" (component type "S")
3 ETN248 Component: "PI_BASIS" rel. "2006_1_710", Support Package level: "0008" (component type "X")
3 ETN248 Component: "ST-PI" rel. "2005_1_710", Support Package level: "0003" (component type "X")
3 ETN248 Component: "SAP_BW" rel. "710", Support Package level: "0008" (component type "W")
2 ETN085X"1. Calculate Support Package queue part" "for each component" " " " "
3 ETN431 Calculate the queue part for "SAP_ABA" rel."710" with target SP "SAPKA71008" (level "0008")
2WETN423 Package "SAPKA71008": Import prerequisites are not fulfilled
3 ETN245 The following import prerequisites of OCS Package " " have not been met:
3 ETN246 Support Package "SAPKA71007" must be available or already imported in the system -
I have SCCM 2012 SP1 recently upgraded to R2. I'm currently setting this up to migrate my production 2007 site. However, I'm trying to use Content Library Explorer on my DP's. I have 3 dps. DP2 connects fine but when i try and connect to DP1 +3 i get
the following error: An error occurred while trying to read the package metadata. The package
PackageID is invalid and must be redistributed from the Configuration Manger console.
Now i can't find any trace of this at all in the console. In the SMSPackagesHist table i can see the package ID and the deleted time was 29-07-2013. This most likely was me trying to create software updates back last year when i initially setup the site.
The package is not listed as content on any of the 3 DPs and i can't find any trace of it at all in the console.
I'm not very familiar with 2012, so not sure what I've done.
Any help or advice appreciated.
Thanks
JaneHi Torsten,
thanks for this. I did a search of the WMI key and found this document: http://blogs.technet.com/b/configmgrteam/archive/2012/05/07/troubleshooting-content-mismatch-warnings-on-a-distribution-point-in-system-center-2012-configuration-manager.aspx (does
this mean it is supported?)
however, on those 2 DP's in that class, the suspect package ID is not listed!???
Any more ideas?
Many thanks
Jane -
[SOLVED] Missing package () function for PyTyle2
Hi, I was trying to install this tarball from the AUR: https://aur.archlinux.org/packages.php?ID=42541
But it prompts the following error:
==> ERROR: Missing package() function in /home/kolt/AUR/pytyle2-hg/PKGBUILD
I've read the PKGBUILD and have no idea why this is happening. I already installed the dependencies needed.
Any clue?
Last edited by Kolt Penny (2015-02-06 08:31:45)Kolt Penny wrote:I've read the PKGBUILD and have no idea why this is happening. I already installed the dependencies needed.
Read the pacman output, it refers to the package() function and makepkg doesn't find it in the PKGBUILD as said. Ask the maintainer to update or orphan it, if he doesn't respond file an AUR request. -
Checkstyle warning: Missing package-info.java file
Hi,
I'm getting a checkstyle warning for a simple class which looks like:
package tools.interprocess;
* Class for testing RMI.
* @author spinth
public final class RMITest {
* Private constructor.
private RMITest() {
* Main method.
* @param args User arguments
public static void main(final String[] args) {
}The warning message says: Missing package-info.java file
I really couldn't figure out what this means and how I can fix it. Do I have to add something to the source tree?
I'm using Eclipse for development and Eclipse-cs as my checkstyle plug-in.
Thanks.
Edited by: spinth on Apr 15, 2010 12:37 PMIf you don't want that warning then simply turn it of.
A package-info.java file is there mostly to attach JavaDoc to the package itself.
If you don't need/want that, then the checkstyle warning is useless. Checkstyle (and similar tools) are meant to be tweaked to your needs and not used blindly. -
Kinterbasdb AUR build missing package info file
Not sure what this means, but used the AUR PKGBUILD and the download didn't resolve, so manually copied the file to the directory from the project page. Package seemed to build ok but on installing it gave message ... load_pkg: missing package info file in kinterbasdb-3.2.src.tar.gz
Any help appreciated.How stupid am I, build these packages all the time, hit the tab key and tried to add the wrong package.
Profound apologies for my stupidy and wasting your time - worked fine of course now.
My only excuse is of having just done a total system upgrade and being agitated that my postgresql won't start!!!!!!!!! and doing > 1 thing at the same time.
Thanks again. -
PL/SQL Packages Metadata in XML
How can I generate an XML file describing packages metadata (packages/procedures/parameters) ?
My goal is to develop an utility that would generate some DB access code (in the way OO4O does). And I'm going to use XML/XSLT for it.I forgot to mention I was developing agains 8i. I've written OraOLEDB + JavaScript solution that met my needs.
Thank you anyway. -
Install DB 10gR2 on RHEL 5.4 x-86 - missing packages
Hi experts,
I am having some problems installing oracle database 10gR2 on RedHat Linux Enterprise 5.4 because on missing packages.
I get the following messages when checking for packages;
enmotif21
binutils-2.17.50.0.6-12.el5
package compat-db is not installed
control-center-2.16.0-16.el5
gcc-4.1.2-46.el5
gcc-c++-4.1.2-46.el5
glibc-2.5-42
glibc-common-2.5-42
package gnome-libs is not installed
libstdc++-4.1.2-46.el5
libstdc++-devel-4.1.2-46.el5
make-3.81-3.el5
package pdksh is not installed
package sysstat is not installed
package xscreensaver is not installed
libaio-0.3.106-3.2
package openmotif21 is not installed
I would like to know the exact names of the packages that are needed and where can i get them.
Thanking you in advanceStep No. 1
First of all you have to install the default package selection while installing RHEL 5.4 x-86. Thereafter you need to install the following rpms manually
1. glibc-devel-2.5-24.i386.rpm
2. libaio-0.3.106-3.2.i386.rpm
3. sysstat-7.0.2-1.el5.i386.rpm
4. java-1.4.2-gcj-compat-src-1.4.2.0-40jpp.115.i386.rpm
5. compat-gcc-34-c++-3.4.6-4.i386.rpm
6. compat-gcc-34-3.4.6-4.i386.rpm
7. compat-libstdc++-33-3.2.3-61.i386.rpm
8. compat-libstdc++-295-2.95.3-85.i386.rpm
Step No. 2
Edit the "/etc/redhat-release" file
Red Hat Enterprise Linux Server release 5.4 (Tikanga)
to
Red Hat Enterprise Linux Server release 4.4 (Tikanga)
Step No. 3
While installing you may encounter the following error
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-01_09-18-29AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-01_09-18-29AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
to overcome this error, you have to install the following packages
libXpm-3.5.5-3
libXp-1.0.0-8
libXpm-devel-3.5.5-3
$ rpm -Uvh libXp-* --nodeps (This option is given to avoid any dependency problem)
Hope this will help you in installing -
OS=Redhat 5
Oracle 11.2.0.1
During the installation of Oracle, I ran into some issues with missing packages. As a result, I could not complete the installation. Does anyone know where I can dowlonad free redhat 5 packages? I tried looking online and the ones I've downloaded does not seem to work.
JinSome packages have a circular dependency. The solution would probably have been to install them together:
<pre>
rpm -Uvh elfutils-libelf-devel-0.137-3.el5.x86_64.rpm \
elfutils-libelf-devel-static-0.137-3.el5.x86_64.rpm
</pre>
or use yum instead of rpm which resolves dependencies automatically. the --nodeps is usually not a good idea because it installs software regardless of failing dependencies, which can break your system. -
Missing package com.microsoft.jdbc.sqlserver.SQLServerDriver
hi all!!
I don't know what's happens, so I hope you can help me...
I try to connect with a jsp-Application a ms sql server over jdbc.
At microsoft.com, I found a jdbc-driver for the spezific sql server and I install it.
So after that I tried different ways to connect the server but every time it fails...
I seams, that the package com.microsoft.jdbc. etc were missing, because my ide doesen't highlight such one package...
So what do you mean...
Over odbc my application runs fine, but that's not the requirements...
It should run with an direct connection to the server...
thx
ram430hi all!!
I don't know what's happens, so I hope you can help
me...
I try to connect with a jsp-Application a ms sql
server over jdbc.
At microsoft.com, I found a jdbc-driver for the
spezific sql server and I install it.
So after that I tried different ways to connect the
server but every time it fails...
I seams, that the package com.microsoft.jdbc. etc
were missing, because my ide doesen't highlight such
one package...
So what do you mean...
Over odbc my application runs fine, but that's not
the requirements...
It should run with an direct connection to the
server...
thx
ram430
Maybe you are looking for
-
IMac to TV (HDMI) : Ghost display when TV is off
Hi, I'm using my Sony TV (40BX420) as my secondary display for my iMac 27", connected via MiniDisplay Adapter+HDMI Cable. When connected everything works fine, the audio & picture appears normally. I use this setup to watch movies on my bigger sc
-
Adobe TV Tutorial: Ok to steal images?
http://tv.adobe.com/watch/adobe-and-your-voice/creating-your-personal-brand-episode-creati ng-a-tshirt-design/community/ I saw this posted on Facebook and left a comment on the Facebook page - and I also commented on the video itself, but the comment
-
i am repairing the lcd glass in the ipod touch 2nd ge and it says ipod disabled for 22,051,536 i mean i can repair the ipod lcd glass but he wount be able to use it for 15313 days/ 41 years. . . . . lol so im just wounder if i un solder the battery w
-
I've just updated on my Ipod touch 5. I have forgotten the pass code. How do I get out of this mess, please?
-
IPod Touch 3.0 - turn videodisplay 180 degrees?
Dear all, I bought a flipcase for my brandnew Touch - you open it like a book. When I like to watch a video, it does not work to turn the touch to the right. It only works when you turn the Touch to the left (or starts automatically like this), but t