Missing part of MP3 when in Clip Trimmer

Hey guys, I just started using iMovie, was quite knowledgable with Adobe Premiere, but switched to a Mac. Working on a little side project with a band and I have my video clip alright, but when I come to add the 26min sound clip, in the clip trimmer, it cuts at 10mins or something. Same goes if I try to export it. I've listened to the actual clip in iTunes and there's music playing throughout the whole track, but for some reason, not in iMovie.
Any idea's?

Brett,
I have run into this problem a few times. Here's how i was able to fix it:
1. right click, select get info, & under details (i think)check the start & stop times. make sure they are not checked, otherwise it's only going ot play a portion of your song.
2. Check the bit rate on the file. Some MP#'s are encoded using VBR (variable bit rate). IF it has VBR, my suggestion is to right click on the file & convert to AAC.
hope this helps. If anyone else has any other suggestions, please feel free to post.

Similar Messages

  • Missing tracks and missing parts of tracks when i purchased a full album??

    hey all,
    ok. heres the deal.. i recently purchased Red Hot Chili Peppers: Greatest Hits from the itunes store.. ive made purchases before im quite capable of making purchases for music apps and topping up my account.  Now for some reason this time everything seemed to have worked fine the first time i listened to the cd.. (however i could be mistaken) but now when i try to listen to the entire album song 2 will skip ahead to the next track in the middle of the song.. and song 4 will skip ahead before it even starts the song.  there are a few more tracks on the cd where it wont let me listen to the full track. only the first few seconds or min. depending one what track hasnt seem to downloaded fully.   what the heck!  so everything seems verified when i check my account it says downloaded.  however it seems it is only partially.  there are bits and pieces of the entire album missing how to i get what i paid for !!!!!   apple seems impossible to get ahold of and i want to listen to what i paid money for darn it!
    anytime i want to listen to the album i cant.  even if i go to the album under purchases it still does the same thing.. somebody please help me. ?
    * even if i try and fast forward through one of these parts that seems to be missing it wont even fast forward through it will just skip ahead to the next track in the middle of the song!
    * yes ive tried updating itunes same thing.

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Scope of Check Variation in Missing Part list Production Order

    Hi,
    I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
    Why this difference is coming,can any body tell the possible causes.
    Cheers,
    Kumar.S

    >
    KUMAR.S. wrote:
    > Hi,
    >
    > I have a problem that While creation or conversion from planned order to production order if i get missing part list i found that Scope of check is as Z6 and ZP (Checking rule).But when when i Release the same production order also am getting missing part list here when i check scope of check as Z6 and PP(Checking rule).
    >
    > Why this difference is coming,can any body tell the possible causes.
    >
    > Cheers,
    > Kumar.S
    Kumar,
    Its simple for creation and release of Production order different checking rule is used(This must be intentional). You check this in OPJK transaction,  check for your order type / Plant combination for Business function 1(Create) the checking rule assigned would be ZP, whereas for the same order type / Plant combination for Business function 2(Release) the checking rule would be PP.
    If you want the same, you can change it here. But I assume there must have been a purpose for this custom checking rule creation. You can find the scope of check difference between these 2 combinations in transaction OPJJ.
    Regards,
    Prasobh

  • Clip Trimmer and viewing Audio Wavefiorm troubles..

    When the Clip Trimmer is open, the help info within the Mac says that an Audio waveform opens up, this does not happen when I do it, any pointers on what I'm doing wrong, I'm simply trying to add beat markers ..
    kindest,
    becca
    ps, Apple,.....Making a movie with iMovie 6 or HD was easy , what happened ?

    You need to select a video clip. The open the Audio inspector. Ducking will be enabled. You can select ducking which will lower the volume of all other audio tracks by the percentage that you specify.
    To import a Keynote Presentation, first, make a Keynote presentation.
    Then Export it to QuickTime. In the QuickTime settings, be sure to choose fixed interval rather than manual advance.
    You should be able to take the resulting file and use File/Import to bring it into iMovie.

  • I selected a clip in the Project window in iMovie 11, opened the Clip Trimmer for that clip, chose the part of the clip I wanted to keep with the yellow bars, and "trim to Selection" in the menu bar is light grey so I can't complete the edit. I'm using a

    I selected a clip in the Project window in iMovie 11, opened the Clip Trimmer for that clip, chose the part of the clip I wanted to keep with the yellow bars, and "trim to Selection" in the menu bar is light grey so I can't complete the edit.
    I'm using a MacbookPro so can't right click to highlight (as was suggested in this forum for the same problem) and can't seem to highlight that area. What do I do?

    When using the Clip Trimmer, you click DONE to indocate that you are finished.
    The Trim To Selection is a great tool and I use it all the time, but you use it in the main project timeline, not the clip trimmer. Just select the frames you want so that the yellow border is around them. Then right-click and select Trim to Selection.

  • When using option right/left arrow in clip trimmer end point handle won't stick

    From the help menu:
    In the Clip Trimmer, do either of the following:
    Drag the handles at either end of the yellow clip selection to set a new startpoint and endpoint.
    Move the handles one frame at a time by placing the pointer near the handle that you want to adjust, and then holding down the Option key as you press the Left Arrow or Right Arrow key.
    Move the entire yellow selection box to the left or right by pressing the Left Arrow or Right Arrow key, or by clicking within the box and dragging. Using this technique, you can change which video frames are selected without changing the duration of the selection
    End of help menu clip
    The bug I've found is that when I place the pointer near the end handle I can hit option arrow and trim the end one frame forward or backwards but when I then hit option arrow a second time the start handle is trimmed.  Thus it is hard to quickly option arrow the end handle trim multiple frames without having to move the pointer each time before hitting option arrow.  Trimming the start point handle works like I would like as I can just keep hitting option arrow and the start point handle will trim a frame each time.  The end point handle should work the same way but it doesn't.  I'm on the latest ver 9.02

    Tea,
    One thing you can do to help yourself out is to create bookmarks to give you a visual reference for the beats in the music.
    You create a bookmark by choosing Bookmarks>Add Bookmarks or by typing command-b.
    So you can place your song in the timeline and then play it while tapping out command-b's to the beat of the music. You'll then have little green diamonds in the timeline to use as reference points.
    Similarly, you can choose View>Show Audio Waveforms to identify the beats in the music by seeing the peaks in the waveforms.
    These techniques should make it a bit easier to make your edits in time with your music.
    Keep in mind though, that your movie is built from left to right in the time line. When you edit a clip your clips will always slide in to take up any space to the left of the clip.
    When they do that, you can slide them apart again. Doing so will create a clip of black between them that can later be replaced.
    One last thing to mention. If you select your music track and then choose Advanced>Lock Audio Clip at Playhead you can then slide a clip around and the locked audio will move with it.
    It's a bit quirky I've found, but may also be useful.
    Matt

  • Missing part check functionaliy at the time of GR when using IDOCS

    Hi All,
    We are using IDOCs to record the the Good Receipt for the Purchase Orders.
    Then a BAPI is called to post the GR.
    There is a functionality for missing parts checks which can be activated at the time of GR which checks the ATP & sends mail to MRP controller.
    When we directly use the MIGO, then missing part check is activated & a mail is sent to MRP controller.
    If we use the IDOC to post the GR, the missing part check is not activated & mhence mail is not sent to MRP controller.
    Pl let us know if there is a way by which we can activate the missing part check in GR using IDOCS.
    Regards
    Vineet

    Hi,
    The G/L accounts which you give in the PO will be Debited & your vendor A/c will be crdtd at the time of LIV.
    Thanks & Regards,

  • When i do posting of goods, the error is "Mat. KEROSINE is a missing part"

    Hi,
    When I first time posting the qty for my material (kerosine) it shows the following error.
    Help needed to solve this.
    System Response----
    The system could neither determine any MRP controller to notify nor any output type used to send the mail message.
    Procedure
    Please contact the MRP controller responsible or use the current stock/ requirements list to check for which purpose (production order, reservation, for example) the material KEROSINE is required.
    Proceed
    Action to be taken by system administrator
    If the MRP controller wishes to be informed of missing parts situations via a mail message, you have to complete the following settings in the Customizing system of Inventory Management:
    Missing parts check at goods receipt
    set message determination
    Regards

    HI,
    path: ImgMaterial ManagementInventory and physical management--plant parameters.
    if you are using an IDES version copy the plant 1000 and change the plant to ur plant and make sure that the missing part field is unchecked and save it
    hope this will reslove the problem
    reward points if the answer is helpful
    REgards,
    Murali

  • Playing a mp3 when a movie clip loads

    I am using Adobe Flash Professional CS6
    What I am trying to do is play a mp3 file that I have in my library when the clip loads and stop playing it when the a new clip is selected from the menu I created.  On the button that loads the movie clip (Instance name: Slideshow), I have the following code:
    [code]
    on (release){
        gotoAndPlay(120);
    onClipEvent (load){
        mySong = new Sound();
        mySong.attachSound("MastersThisHall");
        mySong.start(0,50);
    onClipEvent (unload) {
        mySong.stop();
    [/code]
    - I went to the properties of the MastersThisHall.mp3 file in my library,
    - Selected the "ActionScript", tab,
    - Checked the box that says "Export for ActionScript",
    - Unchecked the "Export in frame 1" check box, and
    - Added MastersThisHall in the "Identifier" field.
    The sound is NOT playing when I when the "Slideshow" button is pressed.
    Ideas?

    Thank you for all of this; it is very helpful.
    I have series of 6 buttons I created, each of them load a different movie clip. I need to have the music from the slideshow NOT continue to play when a new movie clip is selected.
    I have the following code.
    Frame 1:
    SlideshowMusic = new Sound(this);
    SlideshowMusic.attachSound("MastersThisHall");
    stop();
    Frame 120 (attached to the Slideshow movie clip object):
    onClipEvent (load) {
        SlideshowMusic.play();
    The "Mute" Button:
    on (release) {
        SlideshowMusic.setVolume(0);
    The "Resume Sound" Button:
    on (release) {
         SlideshowMusic.setVolume(100);
    And the "Pause" Button:
    on (release)
      if (SlideshowMusic.position < SlideshowMusic.duration)
        SlideshowMusic.start(SlideshowMusic.position / 1000);
    It is loading and working perfectly. However, I have two more questions:
    1. How do I make the the sound automatically stop when a new movie clip is played?
    2. How do I change the "pause" symbol to the "play" symbol when the "Pause" button is pressed?

  • When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.

    When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.
    Thank you for your help!

    Download/install an app is a know possible solution.
    3. Install another app from the App Store
    If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
    Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    Above from Apple's :
    iOS: Troubleshooting applications purchased from the App Store

  • I am adding a voice over - it plays when I am in "clip trimmer" mode but NOT in the actual movie ... frustrating - any help?

    I am adding a voice over - it plays when I am in "clip trimmer" mode but NOT in the actual movie ... frustrating - any help?am in

    In Finder you will find the voiceover in the project's package contents folder. If on your internal drive, the project will be in your User (Home) folder Movies/iMovie projects. If on an external drive it will be in the iMovie Projects folder at the top (root) level of the drive.
    Right-click (or Control-click) on the project name and select Show Package Contents from the pop-up menu. There should be a file named something like Voiceover Recording.caf in the package contents folder. Copy and paste this .caf file to the Desktop. See if it will open in QuickTime, GarageBand or another program capable of editing audio, such as MPEG Streamclip or Audacity (both free). If it will open, save (export) it in a different format, such as AIFF, preferably to a location where it will not be moved, such as iTunes.
    Now drag that file into iMovie to the desired position (if in iTunes drag from iMovie's music browser panel). Hopefully it will now play correctly.
    John
    Message was edited by: John Cogdell

  • Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but p

    Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but part two is not. Why?????

    How is your iPod configured to sync music from your iTunes library?  In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
    B-rock

  • Clip Trimmer Won't Trim

    For some reason when I select Clip trimmer with either an audio or video clip it won't work. I can't move the yellow pieces at all. Hopefully I'm just missing something obvious and I'll just look like an idiot.

    Sorry to bump this, but I can't figure it out

  • Missing Parts List While creating Prd. Order

    Hi Friends,
    My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving  Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
    To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
    But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
    I Tried To Get This From the Following Method
    Checked For Define checking control In OPJK.
    Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
    a) Removed tick mark in No Availability check.
    b) Type of component check Given as - ATP check.
    c) Material release - 1. User decides on release if parts are missing.
    d) PP Checking rule (Which Is same As with plant parameter OPPQ)
    e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
    Then Assigned the availability checking group at Mrp View of Header material.
    In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
    *Please Suggestu2026u2026u2026u2026*
    hari

    Hi,
    Please check same checking rule use in Material master and with order type and plant?
    Check the cheking group in material master MRP3 view for all material.
    Go to Transection OPJJ - Maintain scope of check,
    Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
    (1). CO24- Missing Parts Information System
    Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
    (2). COOIS : Production Order Information System
    Under this transaction you need to Select in List option as Components and then go on Selection Tab.
    For collective availability check use
    COHV - Excute the roport w ith collective avaliabilty check.
    COMAC.
    Hope this help.
    Regards,
    R.Brahmankar

  • MSPT/MACM status at network header - Missing Parts

    I have a query with regards to how the MSPT(missing parts) status is set/unset at the network header level.
    My question is why is the Missing Part status set to INACTIVE at the Network Header level when several components have the Missing Part indicator set.
    The MACM status is set as ACTIVE instead at the network header level.

    Dear Chandra shekar,
    check for the production order type and plant combination in OPJK for business function 1 - material availability check during order
    creation for the check box - check material availability during order creation and likewise for business function 2 - material
    availability during order release and the setting for release material .
    Kindly make the required setting after discussing with your PP consultant and go ahead.
    Regards
    Mangalraj.S

Maybe you are looking for