Missing parts list shows only the first material.

in case of MTO cycle, when i create a plnd order to prod order,in material availability check, system is not displaying all the materials for which shortages are there, instead its showing only the first material.
any help

You need to ensure that these materials are actually missing. You check this in transaction CO09 (SAP Note 89362). The checking rule will be whatever you assigned to the production order type in OPJK.
Also, you need to ensure that the "missing" materials are actually checked for availability - The checking group is assigned in the MRP3 tab of the material master. In OVZ2, look at the entry for this checking group and ensure that "No Check" is not ticked.

Similar Messages

  • Safari 4.0 is slower to show only the first web site

    Safari 4.0 is slower to show only the first web site. Once Safari is open, the first site may take 4 to 5 seconds to show, and Console indicates:
    11/06/09 17:15:09 [0x0-0x99099].com.apple.Safari[1029] Debugger() was called!
    Subsequent sites load in just one second or so (and Console does not show any messsage).
    If I quit Safari and open it again, the same issue arises: it takes longer to show the very first site (whatever it is) but not the subsequent ones (for which it is quicker), and Console shows a similar string on such very first site (but not the subsequent ones). Other examples of such string:
    11/06/09 17:15:58 [0x0-0x9b09b].com.apple.Safari[1033] Debugger() was called!
    11/06/09 17:15:58 [0x0-0x9b09b].com.apple.Safari[1033] Debugger() was called!
    11/06/09 17:17:06 [0x0-0x9c09c].com.apple.Safari[1036] Debugger() was called!
    How to prevent such Console message and make Safari also quick to show the very first page or site after opening Safari?
    Thanks.

    Not to get your hopes up, did you ever hear or figure out any resolution to this. I have a (slightly) similar issue passed along from one of my bosses, that when he upgraded to 4.0.2 it started causing issues with FTP logins through Safari. He would have to enter passwords multiple times on the same site. So initial entry worked and then every subsequent event needed a password entry. Just curious if this could be part of your problem. I tried to emulate the problem on my machines and only on the one I have the 4.0.2 update does it happen.

  • Apparently I inadverdently clicked on something that changed my address book listings to showing only the first three letters of each name -

    the column showing my address book now shows only the first three characters of each name
    it's like they have all been abbreviated
    I have to try and decipher the name from those three characters before clicking
    to see the
    person's address window with the full information
    I would like to be able to read the entire name- first & last like before
    Thank you in advance

    try dragging the column heading to make the column wider

  • My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help

    My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help

    You need to refresh the page (F5) to update the items in the download menu. Apparently YouTube refreshes the page in such a way that the extension doesn't gets notified, so you need to refresh the page manually if you want to download a media file from this page.

  • "Pie chart in pivot view  showing only the first column's results" in obiee

    Hi,
    In my pivot view(pie chart view+pivottable),i'm getting only the first column's result in pie chart..
    I have added a column named *'A*' in rows and '*moneyspent*' in measuresfield and the '*period*' in the columnsfield in the pivot view.I'm calculating the sum of
    the rows and columns..
    I'm not getting the sum valueof moneyspent in the pie chart..instead i'm getting only the first column of period in the pivot table in the pie chart.
    can anyone tell how can i get the sum value of pivot table in pie chart?
    Thanks in advance..

    Hi Prash,
    let me try to give you an example based on the paint sample:
    Use Markets.Region, Products.Brand, 'Sales Measures'.Units
    choose a pivot view to display the result: region goes into the rows-section, Brand goes into the columns-section and Units into the measures-section
    In the columns-section add a total using the 'add total' at 'Measure Labels' level
    the result is a total column on the right side of the pivot.
    looking like this:
    Units
    Brands
    Region Enterprise Magicolor Mccloskey Valspar Units Total
    Central 1032.....
    Eastern 1485......
    Southern 824.....
    Western 580
    What I am looking for is a new column 'Units Total pct'.
    If I duplicate the measure to show the values in percent, I'll get a second column per Brand (showing the absolute and percentage values) - that's what I don't want
    Regards
    Andy

  • Multi-page pdf documents show only the first page in safari

    I suspect QT is the culprit, when I right-click the page and click About QT Plugin... nothing happens, when I then click the page [plugin failure] button shows up.
    I have QT and QT7 Pro installed on my machine running OS X 10.6.8

    You need to maintain the relative folder structure that was used when the links were created. For example, the first link in the catalog list (0.1A 3SH Standard), is pointing to a file called "TOC-01a.pdf" that is in a sub-folder called "0.1A" under the folder where the main PDF is located.
    You should really try to get the entire thing as a zip file, or have the creators of the PDF change their links to ones that point to URLs, or you'll need to spend a lot of time on re-creating the folder structure for all the links in this file (which you don't have access to unless you have Acrobat, anyway)...

  • Web part created on a subsite for a sharepoint list in another site using sharepoint designer, to show only the subsite's reports. Connection dropping off and showing all the reports

    I crated web parts in the sub-sites (we have about 10 subsites) using sharepoint designer from a main list in another site.  Then used web part to show only the  ubsite's reports - using connection to the main list.  Problem is, the connection
    is dropping off and showing all the reports on the main list that are confidential.  this has happened 3 time lately.  Could someone explain why it happens some times?  I had to fix it by adding the web part again and connecting it
    Thanks, Subathy.

    Hi George,
    If you want to use a top level site "department" list column in all sub-sites, you can go to top level site and create a
    lookup type "Site column" to look up the value from the department list, then all sub-sites can use this lookup type site column created in top level site.
    Thanks 
    Daniel Yang
    TechNet Community Support

  • Drop Down Box Choose A Name and Have only the first name show up

    I am creating a form for health care.
    I have a drop down box with names of Physicians... their full names so they can be easily identified. And then subsequent fields that will be populated based off of the choice. However What I need is that after the full name from the drop down list is selected than only the Dr's First name shows up in the box to be distributed through out the file. All the rest of the information is already in using this Java:
    switch(this.rawValue){
        case "MD":
            form1.Page1.Physician1LastName.rawValue = " Acccc";
            form1.Page1.Physician1Number.rawValue = "1111111111";
            form1.Page1.Physician1Fax.rawValue = "2222222222";
            form1.Page1.ClientEmail.rawValue = "[email protected]";
            form1.Page1.Physician1Address.rawValue = "xyz suite ";
            form1.Page1.Physician1City.rawValue = "XYY CIth";
            form1.Page1.Physician1State.rawValue = "XZ";
            form1.Page1.Physician1Zip.rawValue = "11111";
            form1.Page1.Physician1NPI.rawValue = "111111111";
            form1.Page1.Physician1License.rawValue = "ABBB111111";
            form1.Page1.Physician1UPIN.rawValue = "A11111";
            form1.Page1.Physician1Specialization.rawValue = "Internist";
            break;
    And is working beautifully thanks for previous help everyone.
    Here is the example from the Drop Down list choices:
         Dr. Aaaaa Abb Accccc
         Dr. Baaaa Bbb Bccccc
    I would like to choose :
         Dr. Aaaaa A Aaaaa
    and upon chosing it have it show only the first name in that field so it can be processed correctly through out the rest of the fields.
    ie:    Aaaaa   (Only nothing else)
    I am a horrible at this stuff I just surf around until I find something that works and copy and paste and play until it works
    So Please be specific:
    Java vs FOrm: Client: Choice   and code ....
    Thanks SO much ....

    Take a look at the attached. The script assumes the name is a three-part string such as Dr. Frank Burns. You can modify it according to your needs.
    // form1.page1.dd::exit - (JavaScript, client)
    if (this.rawValue != null) {
      var doc = this.rawValue;
      var i = doc.indexOf(" ");
      doc = doc.substring(i+1,doc.length);
      this.rawValue = doc.substring(0,doc.indexOf(" "));
    Steve

  • I purchased a album and only the first part of each song plays, even though the entire length is listed  in the file properities. Any Ideas?

    I purchased a album and only the first part of each song plays, even though the entire length is listed  in the file properities. Any Ideas?

    Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library and then download again from your purchased history. If the problem persists, or that facility is not available in your region, contact the iTunes Store support staff through the report a problem links in your account history.
    tt2

  • "missing part list" releasing process order, but the material there is

    Hi dears,
    I’ve a strange problem.
    When i’m going to release a process order, the system give me a “missing part list”.
    The strange is the material indicated  in that list, a component of a phantom, is present in state free in the st. location indicate.
    Does anybody know what can be the problem?
    Thanks in advance,
    Juan

    Hi all,
    the problem was that the material was present in quantity lower than safety stock.
    For this reason, the system give me that advice.
    however thanks for the help.
    Best regards,
    Juan

  • Co24 missing parts list does not show material with shortage

    Dear All,
    I have a following problem: a production order with status MSPR which has 2 components in the missing parts list from availability check (inside that PO).
    In Co24 tcode system does not show any missing parts for the same production order.
    For these missing parts i have shipping notifications with an exeption message 10: "bring process forward".
    My question is why Co24 does not show missing parts while they are shown in the production order if click on ATP check button.
    Is there any interconnection with expection messages to bring process forward?
    Thanks for your help!
    Regards, Andrey

    It seems that at the stage when atp check was run last time there were no reciepts for missing parts. When i was doing ATP check in production order i didn't save results thus respective table was still containing old results.
    After i saved results of ATP check in production order missing parts were dispayed in Co24 as expected.

  • Missing part list is incomplete while creating Production Order and 2 components are not shown in the list.

    Hi Team,
    We are facing issue for availability check. During creation of Production order, the missing part list is not complete and it should show componenet A in the Missing part list. Below is the details:
    Production Order quantity: 100 kg
    Componenet A required quantity: 100 kg
    MMBE Unrestricted qty: 1000 kg
    MMBE Reserved Quantity: 2000 kg
    So as per above figures component A should come as missing part during availability check. But it is not coming as missing part. Please check and give your inputs.

    Hello
    The results of availability check should NEVER be compared with MMBE. As already mentioned, transaction CO09 is more appropriate.
    Also, this issue has been already discussed on hundreds of threads in the past. See some examples below:
    Problem with missing parts list during production order creation
    issue in committing material for production order
    Material Availibility check in Production orders
    availability check
    order is not released
    As it is stated on the The SCN Rules of Engagement you should do some research before opening a thread. Therefore, please use the search tool or even google to search for similar problems before opening a thread.
    BR
    Caetano

  • Only the first two episodes showing

    When I do a search on my podcast in the iTunes Store, the show comes up fine but only the first two episodes are listed. When I click on the show image and go to the show page only those two show up, all four of the episodes are displayed in the other locations that follow the feed.
    Does anyone know why this would happen?

    Actually its really strange, the two missing episodes have been up for a while ( the most recent as of 3 days ago, the older about 12 days) and they never showed up. On a whim I decided to try to resubmit my feed address thinking that maybe I had giving it the wrong one by accident and was given the response that the feed was already taken. When I canceled out of it the new episodes showed up in iTunes. I don't know how but this seems to have prompted the system to recheck my feed and recognize that there were new items available.
    Anyone know why this might be the case? Also, when I view it from the search panel only the first two episodes appear, when you open it by clicking on the image of out logo it shows all four. Any ideas on that? The podcast is called 3 Wise Woodies if you want to see what I mean about how it displays the episodes.
    Thanks for you help.

  • Why the missing parts list changed after Pro.order released

    I open a pro.order before released ,then I do the availability check get a missing parts list, this list including less parts than the missing parts after pro.order released ,why does it caused?which configuration caused?
    Thanks,
    Helai

    Hi Lai,
    You can do Material Availability check at the two stage of Production / Process Orders.
    - First is to control (Check Missing Part) at the time of Order Creation.
      T.code is OPJK - Select order type and Business Transaction -1 at the time of Order Creation
    - Second is to control(Check Missing Part) at the of Order Relase.
      T.code is OPJK - Select order type and Business Transaction - 2 at the time of Order release.
    So it may possible that you have assign different checking group or checks to the above both stages , that's why you got different result regarding missing parts during above both stages.
    Regards,
    Dhaval

  • Exporting slideshows results in file with only the first picture then a blank white screen with music. Apple bug or am I missing the obvious?

    When I export slideshows the result is a file with only the first picture then a blank white screen with music. Apple bug or am I missing the obvious?

    Usually when the phone shows just the white Apple logo, it indicates an issue with the system software that prevents the phone from finishing it's boot sequence. When this happens, you will need to restore the phone, which removes all data and replaces the system software with a fresh set.
    Since the phone is not seen in iTunes when it's in this state, you will have to put it into DFU mode for iTunes to see it.
    To put the phone in DFU mode:
    - make sure the phone is connected to a computer with the current version of iTunes on it.
    - hold the sleep/wake button and the home button simultaneously for 8 seconds.
    - let go of the sleep/wake button and continue pressing the home button. The iTunes screen will show a short progress bar then show a dialog box stating that an iPod was detected that is in recovery mode.
    -click OK
    -click the Restore button in the middle of the iTunes page
    After the restore the phone should be back up and running and you can sync your data back.

Maybe you are looking for

  • Creation of Material BOM

    Hi All, I need to create a material BOM ,as in Transaction CS01, without any components. Which function modules should i be using.. I have tried using CSAI_BOM_MAINTAIN and CSAP_MAT_BOM_CREATE but not with too much success Thanks Aviroop

  • Help with resizing rectangles

    I am very new to adobe and have been struggling with a project that I need to do. I have one rectangle the size of 8.5 x 11 and I need to copy the rectangle and then reduce it to 80% of the orginal rectangle. Can anyone help me with this, I have been

  • Amex File Download - IExpense

    Hi All, We are looking to import our Amex KR1025 transaction files directly into IExpense. We get three daily files from Amex; one from Canada, one from the US and one from Singapore. The Canada and US files come named with a timestamp. ie. XXXXXXXXX

  • ME27 Stock Transport Order

    Hi gurús, we have one problem with the Stock Transport Order. During creation of Stock Transport Order, many deliveries are generated. This occurs, because system takes the information of the materials masters record: Planned delivery time (MRP II vi

  • Go to Java Class Error

    When I highlight a keyword or class and right click to 'Go to Declaration' or 'Browse Javadoc' I get: Go to Java Class Error Unable to determine browse target. Help Thanks