Missing pdf images

I am creating pdf files using Adobe Acrobat Pro on a desktop.  I enable for OCR and minimize the size of these large files.
They work fine on a desktop and on my powerbook running Safari 4.1.2,  but on my ipad many of the images, do not appear?
Do I have to format them for older versions of Acrobat?  or will it still not work?
Thanks

Sounds like a question for Adobe. How to optimize pdfs for the iOS?

Similar Messages

  • Missing Files Images Grey Box with ?

    I have a large document that I am putting in many screenshots. I use the standard format (picture1, picture2, etc), then drag and drop them to my document. This has worked fine overall but yesterday I opened my file and received the error message that files were missing, specificlaly images. If I accept this and look at my document, there are grey boxes with a question mark in the center. What happened? The grey box shows the proper file name, just no image. Show contents shows that I have no files in there, I am at a loss (to fix this and my graphics).
    BTW, I did start this from scratch (no templates).

    Ok, I too got scared with this problem today! But apparently managed to fix it!
    I was designing a photo book in Pages (to later order through iPhoto). I had about 90 high-res photos placed on 80 pages (with some pages having just text). Experimenting with the "PDF pages to JPEG" Automator scripts, my Pages document suddenly displayed grey boxes with a [?] symbol where about half of the images were. I still had about 40 images OK, but the other ones wouldn't display at all.
    Opening the contents of the Pages document from the Finder, I was able to confirm that all my photos where inside the document and that they were not corrupted in any way.
    I uncompressed the "index.xml.gz" file inside the Pages document and after a little examination, I spotted an odd property on an image entry: sf:corrupt="true"!!! What the ****.... That property was assigned to 43 images, the same ones that no longer appeared in my document.
    To be able to edit the index.xml file more easily, I modified Pages' preferences file so that it would not "gz" the index.xml file. See: http://developer.apple.com/documentation/AppleApplications/Conceptual/iWork2-0XML/Chapter02/chapter_2_section5.html
    I then re-launched Pages, opened my document with the images still broken, just saved it right away, closed the document from Pages and opened its contents from the Finder. The index.xml file no longer being compressed in gz format, the file was now easily editable. I opened it with BBEdit and removed all instances of sf:corrupt="true". Saved the file, closed everything and reopened my document in Pages. Bingo! All images are back!
    Where does that "corrupt" property come from?

  • Error message: Missing PDF maker files in Word 2007

    OK, I am beyond frustrated. I have had nothing but trouble with Windows Vista and Adobe Acrobat. Please help!!!
    What happens: first, the pdf addin for Word 2007 suddenly becomes disabled, for no apparent reason. Forget about trying to re-enable it through the Add-Ins menu, because Word tells me that the "connected state of Office Add-Ins registered in the HKEY_LOCAL_MACHINE cannot be changed". This is a problem for me, because I use a special font (Vietnamese) that sometimes gets corrupted when running pdf maker. The only consistent way I have found to avoid this problem is to run the pdf maker as "Quick PDF" and as far as I can see that option is only available through the pdf addin in Word, I have never been able to find it when I open the Acrobat program and create a pdf from there.
    Second problem: shortly after the pdf addin becomes disabled, my Acrobat program loses the ability to create pdfs altogether. I get the error message "Missing PDF maker files". Yes, I have tried repairing the installation and re-starting my computer per the instructions given. It doesn't fix the problem. I also tried looking in the Knowledge Database on this website, but it appears that the instructions they have to fix the problem there are for earlier versions of Word, not 2007, because my version of word does not look like the version of Word in their little videos.
    This is the second time this has happened. The first time I resolved the problem by a) re-installing Acrobat, which is a pain because it involves calling Adobe and wading through their customer service to get a new installation number, and b) paying a computer repair service to dig deep into the guts of my computer and convince it to change the Office Add-ins to allow the pdf addin again. It worked for about 6 months, and now I have the same problem again. For some reason Vista is spontaneously disabling Acrobat.
    I simply cannot deal with this every few months. We all know that Vista is a crappy program, but I run a business and I need a program that works with whatever crappy program Microsoft puts out. Please, can anyone give me suggestions about how to re-enable these functions when Vista disables them?
    Thanks in advance!
    Alycia

    for Office 2007, see if this Microsoft product will work for you
    http://www.microsoft.com/downloads/details.aspx?FamilyId=4D951911-3E7E-4AE6-B059-A2E79ED87 041&displaylang=en

  • Unable to display a PDF image on the page - Mac 10.6

    Hi,
    Running an iMac with 10.6.8 and Indesign 5.0.4. Just wanting to export a PDF as per usual via File > Export function. However, I keep getting the error message, "Unable to display a PDF image on the page'. No idea what this is and have never seen this error before. The only info on the internet reveals error code 0x2511(9489).
    I've deleted prefs, closed down and re-opened Indesign and even restarted the computer. I've also re-linked the images contained in the document and even created a new document and set it up the same, but still the same problem. Investigating further, other Indesign documents still export properly.
    The only ones that don't export are 2 documents, both giving this same error message. Both documents are ones where a client has sent a PDF, I've imported into two of these into an 2-page A4 Indesign document (each PDF is 48MB each) and then just added a text layer (using Times) which is properly installed on the computer. I basically have to 'update' course dates for the client and add PDF to the website, all very basic.
    I've tried importing a jpeg and other PDFs into the file (replacing the existing ones) and they export fine.
    All my software is legal and I've exported this document before now in exactly the same File > Export without any problems (under 10.5 and 10.6).
    OK... I've just imported the offending PDFs into Acrobat, optimized and shrunk the file size, re-imported back to Indesign and the PDF export works fine. So it seems InDesign / PDF Export doesn't like large imported PDFs? I think they were originally exported from Publisher, so maybe that's the problem or a file conflict somehow.
    Any ideas on the culprit? I've googled it, searched these forums and Apple discussions and haven't found anything. Although I've found a workaround, I do get large files to import and then export. Thanks for any help
    Steve

    It does sound like a problem with the original PDF files the client sent you. You can check how they were made in Acrobat Pro from the Additional MetaData button on the Description tab of the document properties dialog. It will be under Advanced at the bottom of the list when the metadata opens.
    You might be able to salvage them by running the optimzer and not changing the size, or just doing a Save As in Acrobat.

  • Missing PDF link that is no longer in the document?

    Hello -
    I have this document that previously had a multi-page PDF linked file. After several iterations the PDF images were removed from the document. Recently our IT had decided to rename our servers so all the links in the document had to be relinked and that is when i noticed that Indesign still thinks this PDF is in the document even tho it doesn't designate a page number within the Link tab nor does it jump to the link upon "Go to Link". I have even tried to relink to the new location and it does nothing... i'm scratching my head. At the moment it has no adverse effects or corruption to document or otherwise, but i'd hate for something horrible to manifest itself later. Any ideas?
    One thing to note, is the PDF file name has "-" in the name. Not sure if this matters but i've seen some chatter here that refer to anomolies with alternative text in the file names.
    I'm working in CC and on a Windows 7.

    Thanks for the tip, Bob. This worked! I will need to check and see if all the graphical features came through - there are not very many.
    Cheers!

  • How do i find or replace the missing disk image for my HD

    How do i find or replace the missing disk image? for my HD ........as it is missing when i try to back up with time machine, 
    i asked for assistance the other day with time machine
    now i have worked out this is the reason i can not back up with TM, due to no disk image in my portable hard drive
    I saw a post on youtube where it explains you can copy a your HD disk imag from your time machine back ups enabeling, time machine to back up
    But i can not find where the TM Back up driver is situated in my TM Back up's
    Some advice would be greatly appreceate   as i am rather new to Mackintosh 
    Thank you
    Aiden

    Hi again.
    Just re-reading your first post, I wonder if you're confusing a disk image backup with Time Machine?
    It's certainly possible to create a disc image of your Macintosh HD and copy it to an external drive.
    However, as a backup that method has a drawback; you can't boot from a disc image directly. It needs to be mounted on a bootable system before it can be used. So it's not really much use if the internal HD fails, at least as far as allowing you to carry on working while the repair is carried out.
    Much better (and simpler) is to clone the whole drive to the external using CarbonCopyCloner or SuperDuper (there are plenty of others, but those appear to be the most popular).
    That will give you a bootable backup which can be kept up to date by incremental backups using the same applications.
    In the event of total internal HD failure all you need to do is replace the drive then boot from the clone and reverse clone to the internal to get up and running again.
    Many of us use both a bootable clone and Time Machine (on seperate drives) as each has it's different uses.

  • How to read ZIP files(having PDFs,Image) using MQ Series link for R/3

    Hi,
    1)Is it possible to transfer a zip file (having an image or pdf) using IDocs in SAP 4.6C using MQ Series link for R/?
    Scenario: "MQ Series link for R/3" converts Business-Reports from a third-party software,into SAP IDocs.Each Business-Report contains one XML file and one ZIP file.
    2)Being on ABAP side,do I have to worry about how the zip file would be converted into IDocs?
    Detailed descrption:
    This scenario requires integration of a non-SAP software which talks in XML with SAP R/3(4.6C).The customer has decided to go with 'MQ Series link for R/3' (which integrates any non-SAP application running on IBM MQ Series to R/3,by converting data(in any format) into IDocs).He is not ready to go for XI.
    The Problem area is a functionality which requires the non-SAP software to send XML file along with an attached Zip file.So,XML document,basically,has a 'zippedFile' XML element having actual file in XML keyword 'file'.
    This XML document ideally, should be converted by the subsystem(MQSeries link for R/3) into IDocs i.e. into a stream which could be stored in a table on R/3 side and later, sent back to the non-SAP software through MQ Series link to be converted into zip-file again with corresponding pdfs,images.I want someone who has worked in a similar scenario to confirm this.

    Hi,
    I have a feeling I have posted this question in the wrong forum or maybe I will let you decide this.Any help would be appreciated (even the right forum name).
    My scenario requires integration of a non-SAP software which talks in XML with SAP R/3(4.6C).The customer has decided to go with 'MQ Series link for R/3' (which integrates any non-SAP application running on IBM MQ Series to R/3,by converting data(in any format) into IDocs).He is not ready to go for XI.
    The Problem area is a functionality which requires the non-SAP software to send XML file along with an attached Zip file.So,XML document,basically,has a 'zippedFile' XML element having actual file in XML keyword 'file'.
    This XML document ideally, should be converted by the subsystem(MQSeries link for R/3) into IDocs i.e. into a stream which could be stored in a table on R/3 side and later, sent back to the non-SAP software through MQ Series link to be converted into zip-file again with corresponding pdfs,images.I wanted someone who has worked in a similar scenario to confirm this.

  • PDF images distorted in Keynote 6.0

    When I Open a presentation created in Keynote V5.3 with Keynote 6.0, some PDF images look fine in th editor but become aliased and pixellated when displayed in presentation mode. If I copy the image from Keynote, save it to the desktop and then open it in Preview I see the same distortion. Is there
    a workaround for this.
    Joseph Ayers

    Thank you so much. I didn't know that shortcut and it fixed it right away. I was surprised that when I went back to the section that all of those slide were only a small portion of the page. It's almost like the white part of the slide got bigger so the actual slide information shrunk. Obviously I hit something in my frustration that changed the slide size, but luckily it will be easy to replace. Great response to my question and much appreciated!

  • JPG or PDF image in Portfolio window

    How do you remove the JPG or PDF image from the top right of a Portfolio window?
    I'm using Acrobat X10.1.1 on an iMac with Mac OS X 10.7.2

    I created a PDF Portfolio using the Wave layout. I added a few frames with a name and description.
    I do not want to delete the image, I would like to remove the small jpg or pdf logo that appears on the picture (image) in the top right hand corner. The logo appears in both the Layout Mode and the Edit Mode. When I emailed the portfolio to myself the small logo was still in the picture.
    Thanks….
    John McKee

  • How to convert PDF image to excel sheet

    Hi,
        I am trying to convert the PDF image /Text file to Excel sheet then I need to use that data for my reports
    Can you please let me know
    1) How I can convert the PDF into a excel sheet
    2) Which s/w i need to use for that(adobe s/w)
    3) do need to purchse any other 3rd pary s/w to use this
    s/w - software
    PDF Image - scanned document in the image format
    Regards
    Shrinivas

    You need Acrobat Standard or Pro to convert the scanned image to readable text (OCR) and then save it as a Excel file (if Acrobat recognizes that it's a table, which I doubt it will). Maybe there are some 3rd party plugins that can help you further.

  • How can I upload a PDF image with out it going grainy

    i am trying to write an adobe form and I need to have the names of the authors at the bottom of the page in columns, It seems impossible to do this by entering the text into the box on the form as the spacing doesn't work. I  have made a PDF image of what I want to write but each time I upload it it becomes grainy. If I save it as a PNG or TIFF it is still grainy - even if I reduce the file size to the required number of pixels - please help me!

    Please share your form with me ([email protected]) as a co-author. Also send me the image you are trying to add to you form.
    Instructions on how to share : http://forums.adobe.com/docs/DOC-2462
    I'll see if I can help you
    Gen

  • Missing PDF Options in Acrobat Pro 8

    For some reason, on some machines in the office "PDF Options" is missing when we try to print to the Adobe PDF 8.0 printer under OS X 10.4.10. Both machines are Intel-based.
    Two of the machines in the office have the option, two don't.
    We thought it was something specific to these machines. Then yesterday, on a brand new MacBook Pro, we reinstalled a user's license from the DVD and the same thing happened: no PDF Options. This machine had been used for two days. Microsoft Office 2004 installed, Firefox and that's it - otherwise bog standard. Never had an Adobe product on it, never had Acrobat on it. Updated to 8.1.1, no change.
    We've tried completely uninstalling, trashing all the Adobe and Acrobat-related items in /Library and ~/Library, same with prefs. We've searched the entire machine for any string that includes 'adobe' or 'acrobat' and trashed them, emptied the trash, restarted, then reinstalled (re-serialising in the process). We've reset the printing system and added the printers back.
    We've cleaned the cache files (using AppleJack, a great little utility), repaired permissions, reinstalled the 10.4.10 Combo Updater, DiskWarriored the machine.
    We're tearing our hair out, because in our office, this option is vital to the daily work flow.
    Is anyone else seeing this? Anyone got a reliable fix?

    I "think" that there may be a way to correct this, but it's at your own peril if it doesn't. Then again what have you got to lose? Here is something from another public forum. It's about Acrobat 6.x and 7.x but it sounds like the same issue. If you decide to try this and it works let us know.
    http://adobe.groupbrowser.com/threadpage1616-2-10.html
    "Re: Acrobat 7 Pro: missing PDF Options menu in all applications
    06-23-2005, 07:00 PM #15
    [email protected]
    Guest
    Status:
    Posts: n/a
    Re: Acrobat 7 Pro: missing PDF Options menu in all applications
    Hi all,
    I solved this error with Acrobat 7 by deleting the com.adobe.print.AdobePDF7 folder from the user library preferences. It may be missed by those who are deleting preferences because it is not grouped with the com.adobe.acrobat.xxx.plist files.
    The equivalent folder for Acrobat 6 is called com.adobe.print.AdobePDF located in the users home library preference folder.
    I hope this helps.
    Best,
    John"
    ~T

  • OCR Exact is doing weird cut and paste to original PDF image

    Using Acrobat 7, I am scanning old typewritten documents, most on legal sized paper.  When I run “OCR exact” on them to create searchable text (hidden text) behind the original image, the original image (on top of the hidden text) changes.  Specifically, Acrobat takes part of the original PDF image and copies it at the bottom of the original PDF image.  When I have the document displayed in full screen, I can sit there and watch the image change at the bottom when the OCR completes running.  It always changes the bottom of the PDF by taking a small snapshot of part of the PDF from somewhere else in the PDF and repeating it at the bottom.  I have seen it take a chunk from the top of the document and repeat it at the bottom, and I have seen it take a chunk of the document from the middle and repeat it at the bottom.  The “repeated part” will sometimes start at the very end (not covering original text), and sometimes start an inch or two from the end (thus covering some original text).  It only seems to happen on documents that were typewritten.  Scans of documents created after the invention of word processors don’t end up having the problem I am describing.
    Anyone know what is happening and how to correct it?  Thank you.

    Hi stpippin,
    I am not sure what you are trying to do. Numbers works best with several small tables, each with a purpose. Rather than copying formulas to another part of a table, you can create another table with a new purpose.
    Table 1 contains values (typed in, pasted in, or calculated from elsewhere):
    Fruit
    Value
    Apple
    99
    Banana
    98
    Cherry
    97
    Date
    96
    Eugenia
    95
    Fig
    94
    Grape
    93
    Table 2
    Fruit
    Value
    Apple
    99
    Banana
    98
    Cherry
    97
    Date
    96
    Eugenia
    95
    Fig
    94
    Grape
    93
    A2 contains this formula (and Fill Down and Right)
    =Table 1::A2
    Select cells A2 to B8 and copy. Then paste into Table 3:
    Fruit
    Value
    Apple
    99
    Banana
    98
    Cherry
    97
    Date
    96
    Eugenia
    95
    Fig
    94
    Grape
    93
    Formula in Table 3::A2 becomes
    =Table 1::A2
    Now you have another table that duplicates Table 2. What do you want to do with it?
    Regards,
    Ian.

  • Missing PDF plug in when opening a page in Safari

    Hello. I am trying to open a webpage in Safari that contains an embedded PDF. I do get a message saying "missing PDF plug-in", but I already have Adobe Acrobat X (Upgraded Version) on the MBP.
    I have already set the PDF's to open with Acrobat X. Any ideas?

    LoveTheBerry wrote:
    Hello. I am trying to open a webpage in Safari that contains an embedded PDF. I do get a message saying "missing PDF plug-in", but I already have Adobe Acrobat X (Upgraded Version) on the MBP.
    I have already set the PDF's to open with Acrobat X. Any ideas?
    Use Preview instead

  • How to make single file from multiple PDF image?

    Hi, it's my first question in SCN.
    I promise my efforts for developing this site.
    Lately, I made multiple PDF image by function 'CONVERT_OTFSPOOLJOB_2_PDF'.(each spool ID)
    And I wanna make single .PDF file by merging these image in server directory(not local PC).
    So I tried it following.
    1. Each internal table resulted from CONVERT_OTFSPOOLJOB_2_PDF append one internal table.
       BL_PDF + MF_PDF → PDF
    2. Excute following command.
      OPEN DATASET P_FILE FOR OUTPUT MESSAGE LV_MSG IN BINARY MODE.
      IF SY-SUBRC = 0.
        LOOP AT PDF.
          MOVE PDF TO FIELD.
          TRANSFER FIELD TO P_FILE.
          CLEAR PDF.
        ENDLOOP.
        CLOSE DATASET P_FILE.
      ENDIF.
    But files was not merged, only last image was made as .PDF file instead.
    How can I do it?
    Thank you.

    Hi Sangrok,
    Instead of preparing PDF multiple times, you can combine all the OTF data and then finally convert it into PDF. For saving the PDF onto application server, you can refer following report.
    http://wiki.scn.sap.com/wiki/display/Snippets/To+convert+spools+to+PDF+and+place+it+in+Application+server+with+the+Generated+Partner+ID
    Regards,
    Aditya

Maybe you are looking for

  • Printing from Outlook 2011 stopped working

    I am helping a friend who uses Microsoft Office 2011 on an iMac running 10.7.2. He is suddenly unable to print from Outlook. Choosing Print... from the File menu or clicking a print button produces no result at all - the normal print dialogue box doe

  • Syncing Ipod Nano

    I accidently deleted my syncing playlist and now it deleted all the songs off my ipod when it updated it and it says "Songs on the ipod cannot be updated because all of the playlists selected for syncing no longer exists" i dont know how to fix it an

  • Final Invoice Processing in Down Payment

    Hi Frendz, We have Succesfuly created Downpayment Request by SD with Accounting Entries, How to clear Final Invoice Processing. Steps:- Created Sales Order with customer and material with Billin Plan ItemCat is TAO and Created Downpayment Invoice wit

  • HT4628 hi has anyone else considered going back to pen and paper after upgrading their imac to lion? i miss the internet connection that i pay for

    In our house we have lots of Apple products and they all conect to our wireless no problems.  My imac used to until I upgraded to lion and now it is almost useless.  I have updated software and tested my wireless connectivity which is fine with other

  • Apps keep crashing or not opening

    Safari crashes all the time. Especially on facebook for some reason. The spinning ball comes up and right clicking the icon says not responding. Once it starts, it then tends to do it once every 5 or 6 pages I visit. Also iTunes sometimes doesn't ope