Missing PDFMaker and office 2010 64bit

Hi, I've installed acrobat x standard on my new PC with office 2010 64 bit and noticed that the pdfmaker is not working with office 64bit to create multiple office files in one pdf.  Is there already a solution to solve this problem ??
Thanks for the support.

A handy "bookmark" for the browser:
Be well...

Similar Messages

  • Windows 7 64bit Office 2010 64bit and Captivate v5.5

    I am due to have a new PC with Windows 7 64bit and Office 2010 64bit.
    I am running Captivate v5.5.
    Does anyone know if I am going to run into any problems with the above PC spec when working with Captivate v5.5?
    Thanks in advance,

    Hmm, Noel, you didn't get any answer, thought the staff would pop in.
    I have still 5.5 on my laptop and desktop without any problems. Both are Win7 64 bit. But I use Office 2010 32bit because there were quite a lot of issues with the 64-bit version (at least in the beginning). Since I don't use Office that much, not a problem. That has nothing to do with running Captivate of course. But 5.5 is only available as 32-bit version AFAIK. You'll have to test yourself the export/import to Word from CP, are you using that a lot?
    This answer is only based on my personal experience. Have a lot more RAM then you'll have, necessary for all the multitasking I'm doing.

  • Windows 7 and Office 2010

    I am trying to setup a BB on a computer that is running windows 7 (64bit) and office 2010.  For some reason it will not sync correctly.  Has anyone had issues witht this?  The phone is an 8850. 

    Hi and Welcome to the Forums!
    Many have had issues, many have had success. The only way to diagnose is with details..."it will not sync correctly" only leaves us to guess. Here are some details that might help:
    1) Your BB Desktop Software version -- all 4 octets please
    2) Your BB OS level -- again, all 4 octets
    3) Your carrier/country
    4) What, exactly, happens when you try to sync? Can you configure and not sync? Can you not configure? Are there error messages? Details please to help us to help you.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Client Security Solution and Office 2010's Word and Outlook

    I purchased my system June 16, 2009 with Vista downgraded to XP Pro so I was not able to purchase a upgrade disk from Lenovo to upgrade to Win 7 (deadline was June 22). This week I purchased the Windows 7,retail  64 bit Home Premium upgrade package at a local store.
    I did the upgrade (clean install) Windows 7 64 bit Home Premium on my ThinkPad T400 type 2764-CTO. Also successfully installed all Win 7, 64 bit ThinkVantage software with System Update 4.
    I manually Installed the file z909zis1032us00.exe Client Security Solution 8.3 for Windows 7 (64-bit only) Version: 8.30.0032.00 Note: When upgrading from Windows XP To use TPM with Win 7 erase TPM in the BIOS configuration utility. In the Security and Security Chip menu, locate the option to clear the security device referred to as Security Chip and clear. If not done you can install but not use the program.
    Then I had this issue with Client Security - Password Manager version and Office 2010's Word & Outlook. This was before I spotted a tread with the same issue between Password Manager 3.20.0320.00 and Office 2007.
    I noticed that whenever I run Word 2010 or Outlook in conjunction with Client Security SolutionI I could not select text. I could no longer use CSS because of it...
    I called Lenovo and was told that they do not support retail version of Win 7. (Remember they refuse to sell me their version a week earlier). Because I dint know what to do, I deactivated the TPM in Client Security and it solve the problem in both Word & Outlook.
    On the following automatic System Update at the Lenovo site the system pick up something was wrong with Client Security (it did not when the TPM was activated???) and offered to download and install "Client Security Solution Office 2007 Patch 64bit". I did and following installation I re activated the TPM. The problem in Word & Outlook was no longer there.
    Then on the next system update the system offered to download and install "Patch for IE crash with Password Manager (Win7) version 1.0". I had not experience that problem but downloaded and let the system install it anyway.
    So the problem is not restricted to version 8. 3.20.0320.00 and Office 2007 as reported in the other thread. Because the patch was automatically downloaded fron the web site (Client Security Solution Office 2007 Patch 64bit)  I do not know if it is the same patch the was offered in that thread.
    I hope this will help other people having the same problem.

    Hi All,
    May i know the version of the CSS? Is it Windows 7 CSS 8.3 ? 32 bit or 64 bit? Would love to know more in detailed for i could report to the development team.
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Unexpected restarts when deploying Windows 7 and Office 2010 updates

    I am deploying Windows 7 and Office 2010 updates via SCCM 2012 sp1 and have a couple of questions
    Question 1)
    The updates are made available to clients at 9am on a Tuesday morning.  The users get notification that updates are available to install.  If the user doesn't install the updates, the client will wait 24hrs and then install the updates automatically. 
    We have set the restart behaviour to 24hrs, so again, the user will get a pop up saying that their machine will restart in 24hours.  In my testing I have seen no more pop ups appear until 15 minutes before a restart is due and then a window appears
    with a count down of 15 minutes but I think this might be standard behaviour.  I am not sure why there are options in the client settings to remind users frequently about the impending installation of update but not of impending restarts.  The
    reason we delay the restart by 24hrs is to give the users the chance to restart their machines over night.  Is there a way of providing more notifications of computer restarts ?  The User Experience in the deployment of the updates is set to
    Display in software center and show all notifications.  We have Group Policy set to Not Configured for Windows Updates apart from the user policy
    Remove Access To All Windows Update Features which is set to 0 - Do not show any notifications.
    Question 2)
    Another issue we have is that we have client machines restarting without any warning at all.  I have tested setting the user experience to suppress restarts but have the issue regardless.  It appears that this happens if the client
    is off when the deployment schedule reaches its deadline and the restart time is missed.  I had one user who did restart her machine because she was prompted to restart.  When the machine came back up it looked like it installed another update and
    then just resarted without any warning.  This hasn't happened often but a one user was on a Lync call when the restart occured and she was not happy.
    Any help would be much appreciated.

    Hi Daniel
    I have done an RSOP on a VM I am testing and only have the user policy :
    Remove Access To All Windows Update Features which is set to
    0 - Do not show any notifications.
    And the machine policy :
    Specify intranet Microsoft update service location which is set to
    Enabled The GPO Name is Local Group Policy
    The policies look OK.
    As a test I have deployed some updates and set the user experience to
    Display all notifications and set the Suppress restarts
    for both Servers and Workstations.  When I deploy the updates, I get notifications that the updates are installing (when the deadline is met) and then I get a prompt telling me that a restart is required.  I also get a windo letting me restart now
    or I can ask to be reminded in x number of hours.  This seems like expected behaviour.  It does not force a restart.  However if I leave the VM on over night I come in the following day and can see it has restarted.  looking at the WindowsUpdate.log I
    can see that at 3:15am the line AUInvoking reboot system.  It looks like Windows Updates and not SCCM is forcing the restart. 

  • Smartview on Win 7 and Office 2010 32bit

    I installed smartview on Win 7 and Office 2010 32 bit. The installation was successful but when I try to open Excel or Outlook I get the error that office encountered a serious problem with the add-in and disables the add-in to proceed. Any suggestions to make this work?
    Thank you.

    Yes in Window 7 and on Vista when installing you have to run as an administrator or disable UAC. Once installed you do not need to run as an administrator. On these new OS's even though you have admin right by default you do not run anything as an admin, this is a good thing but you have to be aware of it. http://technet.microsoft.com/en-us/library/cc709691(WS.10).aspx#BKMK_WhatIs
    Glad it is working!

  • Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, merge the calendars on the Iphone so there is only 1 calendar to sync?

    Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, alternatively, merge the calendars on the Iphone so there is only one calendar to sync?

    If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows.  That will get back your music.  I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
    Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.

  • Is Lync 2013 and Office 2010 Home and business compatible?

    Is Lync 2013 and Office 2010 Home and business compatible?

    Lync 2013 and office 2010 is compatible with limited features
    The following features are available only with Office 2010 or Office 2013:
    Contact card with expanded options, such as video call and desktop sharing
    Quick search from the Find a Contact field in Outlook
    Reply with an IM or call from the Outlook Home ribbon in the Mail, Calendar, Contacts, and Tasks folders
    Lync Contacts list in Outlook To-Do Bar
    Office Backstage (File tab) presence status, program sharing, and file transfer
    Presence menu in Microsoft Office SharePoint Workspace 2010 (formerly Microsoft Office Groove 2007)
    Presence menu extensibility
    Also you can refer below link
    For your issue, verify from lync version {for example , if your office 64 bit, Lync must be 64 bit also}
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • OfficeJet 4315 no longer works after Win 7 and Office 2010 service packs applied

    I've used OfficeJet 4315 on a Toshiba Satellite with WinXP (SP3) and Office 2003 and been delighted with the printer.  I recently migrated to a brand-new Acer Aspire with Win 7 and Office 2010 (home & student ed.)  At first, the 4315 worked well--in fact, all I had to do was plug in the USB connection and the in-OS drivers installed automatically.  However, something has now caused the printer too be essentially useless!  I think it happened after I applied SP1 to Win 7 and/or the service pack to Office 2010.  I can no longer print Word files (.doc or .docx), Excel spread sheets (.xls or .xlsx), PDFs, Web pages, or even e-mails,  The only things I can print are .txt files or equivalent and .jpg files or equivalent.  I've tried deleting and reinstalling the printer (including deleting the drivers and reloading them from Windows Update).  I don't believe I should have to replace a perfectly good printer just to support Windows 7 and Office 2010.  I NEED HELP URGENTLY with this problem!  If anyone has any knowledge or ideas, I'd be forever in your debt.  (HP, I'd even pay to get the help I need on this one!!)  TIA.

    Based on your description, my understanding is that the PDF files cannot be checked out to local drafts folder after Office 2013 is installed.
    Did this issue occur with Office files?
    I recommend to check if the Office files can be checked out to local drafts folder with Office 2013.
    And it is recommended to use Office 2010 with SharePoint 2010 for best practice.
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

    I have a new PC laptop with Windows 7 and Office 2010. I have an Airport Extreme, and installed Bonjour on my laptop. Bonjour "sees" my printer. When I try to print, the printer lights up -- but doesn't print. anyone have an idea? Thanks Gregg

    Hi Kelly,
    As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
    I would suggest that you troubleshoot using the steps in this article -
    OS X Yosemite: Printing troubleshooting
    Start with the section titled Check the network.
    Thanks for using Apple Support Communities.
    Brett L 

  • Resource booking with Windows 8.1 and office 2010

    I've two SP3 Laptops running 8.1 on out network.     I've Office 2010 installed on these and they are mostly working fine;
    However they cannot book resources  - this is a common win7 fault we would fix here - http://support.microsoft.com/kb/982774/en-gb
    But its not working under Win 8.1, neither the fixit icon or the manual config.
    We are presently running exchange 2003
    Is there a 8.1 2010 fix you know of?
    Many thanks,
    I asked this yesterday of this forum -
    , but they said that this pro forum was more suited for more technical issues.

    Currently I don't have the exact same environment to test, please make sure you have modified the registry keys correctly and if possible, try this manually on multiple Windows 8.1 machines to see if this is an individual issue or widely affected. If this
    fix doesn't work on all Windows 8.1 machines, please provide feedback or to report this issue with this solution, please leave a comment on the "Fix it for me" blog or send an
    email message.
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office

  • Windows 7 Pro and Enterprise and Office 2010 Not Able to re-Activate

    In September 2012, I was tasked to provide desktop support for a small <50 seat school that uses a combination of Windows 7 Enterprise and Pro as well as Office 2010 Pro Plus with Volume Licenses purchased through Dell. In May of 2013, it was discovered
    that our Microsoft Volume License agreement had lapsed and at the time we could not afford to renew it. In September we purchased a 5 seat license from JourneyEd for Windows 7 Pro and Office 2010 Pro Plus. Also in July 2013, we upgraded and consolidated our
    server setup.
    In November, we began to see notifications that our Microsoft products were becoming deactivated and needed to be reactivated. When we would try to reactivate, there would be an error message that said reactivating failed with no further message.
    I need assistance to determine what is causing our licenses to deactivate and also how to fix this issue.
    Thank you in advance for your assistance

    For licensing related issue, you’d better contact Microsoft licensing team. In the United States and Canada, you may call the licensing team directly at 1-800-426-9400 (select option 4), Monday through Friday, 6:00 A.M. to 5:30 P.M. (PST) to speak directly
    to a Microsoft licensing specialist. In this way, you will know the detailed information about license.
    Worldwide customers can use the Guide to Worldwide Microsoft Licensing Sites
    http://www.microsoft.com/licensing/worldwide.aspx to find contact information in their locations.
    Thank you for your understanding!
    Ada Liu
    TechNet Community Support

  • Windows 7 and Office 2010 activation issues

    hey everyone
    since a few days we facing really strange issue here within our school. We are running windows 7 machines and office 2010 and all our different machine types is it VDI VMs, physical laptops, desktop computer or provisioning machines (Citrix PVS) are facing
    issues with the licensing.
    Sometimes Windows 7 Key is not installed anymore, sometime it is just not activated same for office. So the KMS is installed with the KMS host keys since years and KMS service is running. Also the DNS Output points to the server
    C:\Users\.........>nslookup -type=srv _vlmcs._tcp
    Server:  DC....
    Address:  192.168.X.Y
    _vlmcs._tcp.Domain   SRV service location:
              priority       = 0
              weight         = 0
              port           = 1688
              svr hostname   = KMSHost
    KMSHost.domain  internet address = 192.168.X.Z
    Also when i manually force the machines to update against KMS with VAMT or CLI it is working. What could cause that issues?
    Time issues?
    Thanks for any clue and advice

    Hi Duke,
    "since a few days we facing really strange issue here within our school"
    Have you made any modifications to the KMS server or the whole environment ?Will the issue persist or occur randomly ?Will it occur on the specific ones or all the machines ?
    There are several specific log recorded in the event viewer when the KMS try to activate the machines .We can try to check the event logs both from the client and the KMS server to troubleshoot this issue .Please also check the Windows logs\Applications
    ,system logs for useful information to troubleshoot this issue .
    Here are two links for reference:
    How to troubleshoot the Key Management Service (KMS)
    KMS host troubleshooting & monitoring
    Best regards

  • EPM 11.1.2 with Windows 7 and Office 2010

    Hi all,
    We are getting majorly upgraded to Windows 7 and Office 2010 soon. We use EPM 11.1.2 suite of products. Will all the end-user web applications still work?
    I already found out that Smartview 11.1.2 is not supported for Office 2010.
    Does anybody have experience working with 11.1.2 and Windows 7?

    According to Oracle Support, KB ID 1191235.1, there is Office 2010 suport for 9.3.3 and That release is patch 9889521 and is for SmartView only.
    Havnig said that, people seem to be using it:
    Essbase excel add-in 11.1.2 with office 2010 Excel ?
    Re: Hyperion Essbase Excel Addin - Unable to connect
    Of course you take your own chances with this -- it is an unsupported combination right now.
    Cameron Lackpour
    P.S. John Booth posted today a different patch release (I know, you're on 11.1.2, but for the readers): http://www.network54.com/Forum/58296/thread/1294100830/Does+
    I'd be more inclined to go with John's patch number than mine -- I am just browsing through Oracle support -- he does infrastructure for real.
    Edited by: CL on Jan 4, 2011 2:18 PM
    One note -- the KB article was dated 21 Dec 2010, so it's pretty close to up to date.

  • Problem with Essbase add-in 9.2.1 and office 2010.

    Hi all,
    we have a problem with Essbase add in 9.2.1 and office 2010.
    Every time when a user opens Excel a new (additionally) euntry in the ad-on menue appears.
    Indeed what happens is, that the add-in is loaded n-times.
    At the first start of excel one time, second two times and so on...
    Thtas's very annoying.
    Can someone confirm this issue or even better know a workaround.
    (A way we have found so far to ease the pain a bit -well only temporary- is to disable the ad-in, close Excel and start it again.
    However with every new start of execel the issues begins again.
    But that's not a solution you can recommand to the end user.)
    Any help is welcome.
    Thank you in advance!

    Have a read of the following on Oracle Support - Support for Office 2010 in Essbase Excel Add-In and Smart View [ID 1191235.1]

Maybe you are looking for

  • IPod Touch 1st Generation supported Apps/Games ?

    Hi friends, Can anyone please advice.... I'm having iPod Touch First Generation containing IOS 3.1.3. Do i have option to download apps and games from itunes still, though this is older ipod touch ???? Or do we have any other location where i can app

  • Oracle on redhat 7.3 : tablespace creation never ends

    Hi, We're running Oracle on Redhat 7.3. System memory is 256 MB (2x128). After increasing memory to 1Go (2x512) we're facing a strange problem. Tablespaces re-creation hangs, we first drop and then create tablespaces reusing datafiles : DROP

  • Step by step to get leopard join an AD

    I would appreciate it very much if someone could tell me how to join an imac with leopard to an active directory network. there is a part i dont understand which asks for a GUID... i dont know what to put in there. when i add the info and try to conn

  • Enterprise Manager 10g - change database instance.

    I have installed 10g and I have been using the enterprise manager database control web applet to manage my database. I now have the need to manage a second database, but I cannot get the new databse to show up on the login page; the console still dis

  • SAP WM-Intial Stock Entry

    Hi How to make Intial Stock entry in WM bin .Pls explain the process flow in details . IS that process of making initial stock entry in IM through Movement type 561 is first process.