Missing saplicense.exe. NSP does not run anymore. No install CD. Any help?

Hi, I'm very new in this SAP world. I downloaded the NSP to play with it a little bit but I didn't realize when my license expired. Now I cannot login in the system and the only available instructions I've found specifies to use a saplicene.exe program that does not exist in any directory. I don't have the install CD. Any help?
please respond to my email: [email protected]
Regards,
Herman

I found out how to do it:
1.-I used SAP* / minisap to log in
2.-Click on install button (this shows the HWID key!!!)
3.-Go to http://www.sap.com/minisap
4.-Fill all information (leave the "System number" field blank)
5.-Check on "I agree" (for the agreement)
6.-Click on submit

Similar Messages

Setup.exe file does not run after the download

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name East
- Filename All the disks, 1 through 3, have been downloaded and extracted.
- Date/Time Aug 7, 2002
- Browser + Version
- O/S + Version
- Error Msg
I am unable to run the setup.exe file in Disk1 directory. I think we need more information on how to install the server. Please help us ASAP.

I found out that besides setting the library, I should also set the classpath.
I tried to set the classpath by setting the environment variable CLASSPATH: path1.jar; path2.jar; path3.jar.
I also tried to set it with the command prompt:
CLASSPATH = path1.jar; path2.jar; path3.jar.
But when double clicking on my .exe file, it still does not run and I still get the NoClassDefFoundError.
Please help. Thanks!

Weblogic 6.1 sp2 , application which used to run on wl 6.1 sp1 does not run anymore

Hi
For some reason, my application 'portal' does not run on weblogic 6.1 sp2,
It used to run fine on 6.1 sp1 .
I am attaching the weblogic.log file with this msg.
Thanks,
Regards,
Lalitha
[weblogic6.1sp2logs.txt]

Tobin is right, my apoplication is called "portal", I am not using WLPortal. Anyway,
I managed to resolve my problem,I had sax2 , xp and xt parsers placed in the WEB-INF\lib
directory of my application in addition to my own jar file. I removed the parsers
, and now my application is running fine.
It is strange though, since my application used to load and work flawlessly on
weblogic 6 as well as weblogic 6.1 sp1 with the parsers in the lib directory....
Anyhow, thanks a lot for the help.
Regards,
Lalitha
"Tobin Paterson" <[email protected]> wrote:
>
Having applied WLS 6.1 sp2 upgrade today I am seeing the same fault.
I am not using
WL Portal. Also I think the original poster's application just happens
to be called
"portal" and is not using WL Portal.
cheers,
Tobin.
"BEA Support" <[email protected]> wrote:
Hello,
Only WLCS and/or WLPS 3.5 sp 2 support WLS 6.1 sp 2
WL Portal 4.0 support only WLS 6.1 sp 1.
Regards,
Developer Relations Engineer
BEA Support
"Lalitha" <[email protected]> a écrit dans le message de news:
[email protected]..
Hi
For some reason, my application 'portal' does not run on weblogic
6.1
sp2,
It used to run fine on 6.1 sp1 .
I am attaching the weblogic.log file with this msg.
Thanks,
Regards,
Lalitha

Email program t-online does not run anymore; password wrong???

since 3 days t-online emails do no longer run on my ipad2; without any notice, only thing you read is; server wrong / password wrong, but I did not change anything
any ideas?
thanks
Willi

I found out how to do it:
1.-I used SAP* / minisap to log in
2.-Click on install button (this shows the HWID key!!!)
3.-Go to http://www.sap.com/minisap
4.-Fill all information (leave the "System number" field blank)
5.-Check on "I agree" (for the agreement)
6.-Click on submit

The app "alarm clock with pandora radio" does not work and i cant get any help with it i want my money back

I have tried to get info on this app and it does not show up on the app store any longer so i cant contact the developer about this app for support. it does not work and i feel i was cheated out of my money for an app that was supposed to play pandora when the alarm goes off but it does nothing. i need help with this.

As stated All purchased are final.
Use the e-mail receipt to Report a problem or
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Stand alone labview application (.exe file) does not run properly

Hi all,
I am trying to make a stand alone labview application to run on another computer ( I have never done this before).
I went through the tools->build application prompts and was able to build an exe file.
the program is supposed to control a power meter and make power measurements then save them to a text file.
When I run the exe file, on the same computer I compiled the exe file on, the program generates a text file to save data to but it can not communicate with the power meter.
There are some sub-VIs and a dll file that are used to communicate with the power meter. Could it be that I am not telling labview to correctly
include these files when I create an executable?
What are some common problems that occur when generating stand alone applications that could be causing my issues?
And does anyone know of any good tutorials on generating stand alone applications in labview other than the NI help files?
Thanks for your help,
Solved!
Go to Solution.

edCubed wrote:
Hi Bill, thanks for your suggestions.
I haven't tried to run this app on another computer yet. I'm just trying to run it on the computer it was developed on.
The computer I developed it on has all the drivers/resources I need to control the power meter.
Also, I don't know how to include the VISA runtime with my installer. could you explain how this is done?
This is the first time IV tried to turn any labview programs into stand alone exe files so I don't anything about how to do it other than what I've seen in youtube videos and help files.
If you know of any good tutorials that will help me figure this out I would appreciate it.
Thanks,
My fault - I didn't read that this was the same computer. I know the very end of Core 3 studies shows how to build an executable and installer, but even that is very general. I'm not sure if there exists a tutorial on how to do it.
As for including the runtimes, when you build an installer, you have to include the runtimes that your executable will need. It's fairly straightforward.
Since it won't run on the machine that built it, I'll have to think about it a little bit...
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

[SOLVED] Gnome 3.12 : gnome terminal does not run anymore

I had the following message when trying to run gnome-terminal after updating to 3.12:
Error creating terminal: Message did not receive a reply (timeout by message bus)
I have found a fix, so I'll share it with the community. The problem was that I had vte3-mosh-fix installed from the aur, version 0.34.9 and that gnome-terminal now requires vte3 0.36.0.
Switching to the official vte3 package fixes the issue.

Thank you for posting the solution. I would have never even remembered that I had installed that mosh fix, let alone thought to remove it.

Since installing 3.6.12, firefox crashes continuously...I have gone back to Windows Explorer because firefox does not run anymore. Upon any actioin in firefox, the screen goes white and freezes and I get an error message saying firefox has stopped working

just about any action in firefox will cause a "WHITE SCREEN" freeze up and then an error message stating that firefox has stopped working. This happens in EVERY sessioin of firefox.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

HELP ME T23 does not boot anymore after installing a Lenovo update. Any idea?

Hi, I installed the updates and later I shut down the laptop as requested. Later that day I wanted to start it again but nothing happend other than the little round green light next to the switch button goes on. The monitor stays black. I removed the batterie and plug (the batterie is dead anyway) but that did not help. I believe my harddrive made noise lately, too. Is that the end?

I was able to eject the dvd by pressing the usb mouse left button while booting. Then put it back in after a reboot
After that selecting the alt-key, i selected the install dvd, and after a while (gray background and spinning weel) it took me again to the installation screen.
Will tell you if it is working in a while...

Itunes 9.2 (64 bit) does not run

All of a sudden my iTunes 9.2 (64 bit) on Windows 7 does not run anymore. Repairing the setup did not help. Removing and re-installing the application helped only 1 time, after that the program again did not run anymore. And during that 1 run it did load my (big) library but could not find any of the songs!
Using Window's system restore (back 3 days) did not solve the problem either.
I had been using iTunes 9.2 for a few weeks without a problem. Why doesnt it suddenly not run anymore? What can I do? Thanks for helping!

No error message at all. No clue either.
A few times the program DID run - after around 20 mins waiting it suddenly appeared...
A few other strange things:
- After double clicking the iTunes icon something DOES start: the task manager shows the iTunes process, sometimes with up to 40-50% of the CPU capacity, sometimes with low memory usage, sometimes higher
- When trying to uninstall iTunes (completely) with Revo Uninstaller: the program does not appear in the REVOapplication list
- When trying to uninstall it through Control Panel I can uninstall it.
- I disabled my iTunes library, to be sure that the trouble has nothing to do with that. Maybe it could be too big (around 40 thousand songs!) or corrupt. But even without a library the startup is not possible - or incidentally taking 20 mins or more.
- I ran Advanced System Care to fix registry problems and defragmenting the systems files - no change.
What can be wrong? And more important: what can be done?

Application designer does not run

Hi,
I have different version of Application designer on my laptop (win XP pro).
When I double-click on any pside.exe , it does not run. If I copy the same on another Laptop it runs.
Any idea ?
Thank you.

Thanks Nicolas,
they have worked well until I imported an exported configuration file.
I restarted my PC , but it did not work neither.
Memory issue ? I don't think so but anyway windows says nothing or it says in a logfile that I can not find. Laptop has 3Gb of RAM.
Are we running only one instance of AppDesigner ? Yes .
Regards.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

NSP (SAP NW2004s ABAP AS 7.00 SP8) does not start anymore

Hi all,
I installed SAP NW2004s ABAP Trial Version SP8 and was able to work
with it. Since today I get a timeout error when starting the Application Server.
I tried to start the MaxDB instance with the SAP MMC but I do not know
the user and/or password for the MaxDB User (I did not change the
"Standard-User" provided during installation; unfortunately I do not remeber
the credentials)
Any ideas:
- why the application server does not start anymore ?
- what the credentials of the SAP DB Administrator are ?
Thank you in advance for your help,
Axel

Hi Axel,
this is a 90 day trial, though maybe you're already used it three month?
the database used to run under control, control (usr, password), btu that changes from time to time....
Regards,
Benny

I downloaded the iCloud installer exe. but the installer does not run?

I downloaded the iCloud installer exe. but the installer does not run?

Hi,
Please also try right-clicking on the installer and '''Run as administrator'''.
[https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Windows Installation]

SSIS Job deployment does not run my .exe but is described as a success

Hi i have scripted a simple script task in c# to run an exe with the following code
Process.start(filename.exe);
i have also tried using the 'Execute Process task' in the SSIS toolbox.
both methods work when i debug.
However when deployed to the SQL server as a job, the jobs are described as a success but my program does not run?!
The exe file is published from SQL visual studio and the resultant filename is setup.exe which i am trying to run.
Any help pleasE?
I am not using any shared file resources, the setup.exe is on my desktop.

this is all i get
Message Type
Message Time
Message
Message Source Name
Subcomponent Name
Execution Path
OnPostExecute
8/22/2014 4:15:09 PM
Package:Finished, 4:15:09 PM, Elapsed time: 00:00:00.234.
Package
\Package
OnPostExecute
8/22/2014 4:15:09 PM
Execute Process Task:Finished, 4:15:09 PM, Elapsed time: 00:00:00.203.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation is complete.
Execute Process Task
\Package\Execute Process Task
OnPreExecute
8/22/2014 4:15:09 PM
Execute Process Task:Start, 4:15:09 PM.
Execute Process Task
\Package\Execute Process Task
OnPreValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation has started.
Execute Process Task
\Package\Execute Process Task
OnPreExecute
8/22/2014 4:15:09 PM
Package:Start, 4:15:09 PM.
Package
\Package
OnPreValidate
8/22/2014 4:15:09 PM
Package:Validation has started.
Package
\Package
OnPreValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation has started.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation is complete.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Package:Validation is complete.
Package
\Package
OnInformation
8/22/2014 4:15:08 PM
Package:Information: Succeeded in upgrading the package.
Package
\Package
OnInformation
8/22/2014 4:15:08 PM
run exe:Information: The Script Task "ST_6ba434db5c5649b7b68ab5fb14977781" has been migrated.
The package must be saved to retain migration changes.
run exe
\Package\run exe
OnWarning
8/22/2014 4:15:04 PM
run exe:Warning: Found SQL Server Integration Services 2012 Script Task "ST_6ba434db5c5649b7b68ab5fb14977781"
that requires migration!
run exe
\Package\run exe

Missing saplicense.exe. NSP does not run anymore. No install CD. Any help?

Similar Messages

Maybe you are looking for