Missing Scenario in Operator

Hi
I have a number of scenarios which are scheduled to run (on a schedule agent) in an execution only production repository.
The scenarios are running away fine with no problems if I look in the Session List of the Operator. And if I look at the scheduling information for the agent in the Topology Manager I can also see the scenario scheduled to run correctly.
However if I check in the Scenarios tab in Operator the scenario no longer exists! Similarly if I check the Scheduling tab in the Operator I cannot see the scenario.
I know the scheduler can be out of synch until you click on "Update scheduling" in the topology manager, but even when I do this, the scheduler stays the same, and the scenario no longer exists!
I can also see the record in SNP_PLAN_AGENT.
Anyone any ideas where my scenario can be retrieved.
Thanks
Niall

Hi Reshma
Once again, thanks for the reply.
To answer your questions:
1. Restarting the agent had no impact.
2. I have a development and test repository, where the scenario exists in both front end and in SNP_SCEN database table.
I've re-imported the scenario xml into my production environment (from a subversion backup of all scenario xmls we use). I can now see the scenario in the front end and SNP_SCEN. I'm going to chalk this occurence down to a blip in ODI (certaintly not the first one I've noticed with this tool), and if it happens again I'll raise a ticket on Metalink.
Thanks for your help all the same, I'll mark the question as answered.
Thanks

Similar Messages

  • Mapping Missing, scenario works

    Hi
    After importing a Namespace from QAS, my namespace in DEV is missing. I can't see any of the objects of that Namespace in ESR. The strange part is when I triggered the scenario, which is an Idoc to File, the scenario works though the ESR objects are missing. How is that possible?
    Should I create all those objects again ? Totally confused as to do what
    Regards

    Basically, it assumes the interface for file as virtual. Since you already have configuration in ID, it works.
    There is a blog by William Lee, without IR you can directly work with configuration by creating virtual interfaces by giving any dummy name. In your case this is what happening.
    Check this blog: /people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
    Edited by: Praveen Gujjeti on Jul 4, 2011 9:06 PM

  • Nokia 5530XM - missing date and operator on the ho...

    hello guys,
    this probably seems like a total nonsense, but its kinda important for me to fix it...i dunno when, but once i looked at my home screen and i saw no date and no operator (eg. Vodafone UK)...ive tried like everything...i got the latest software, tried to reset and all the settings but nothing seems to be working id really like to have the date back on my home screen!
    anybody knows how to solve it?
    thanks in adavance 

    im really desperate about it please somebody reply

  • Operation subcontracting (one operation outside scenario)

    Hi
    I am desperately looking for an answer to this scenario regarding operation subcontracting one operation outside, how will be the BOM, Work center, Routing pl provide docs pdf.
    Thanks in advance

    Please follow below.
    1. In Routing assign PP02 control key for second operation.
    2. It will create PR while order release.
    3.Create PO for wrt PR with item cat " L"and do Component Posting to vendor wrt PO(MB1B-541)
    4.DO GR for that PO movement 101
    5.AT the time of GR 543 movement will be done and stock will be consumed from Vendor end( IN SAP it will reduce from stock provided to vendor in MMBE).
    6. If Components which you are sending outside are excisable then you required CIN consultant also, check below steps(It can be without payment of duty and full payment of Duty).
    check below transactions
    7. Creation of Subcontracting Challan w.r.t. Transfer Posting Doc ()
    8. - Reconciliation of Subcontracting Challan (J1IFQ)
    9. - Completion of Subcontracting Challan (J1IF13).
    10.- Generation of Annexure IV (J1IFR)
    Thanks
    Neeraj Dixit

  • Operating system missing

    Hello,
    I have a macbook pro 15" mid 2009 which is missing it's operating system. What are my option as to installing a operating system on the unit?
    I don't have any discs or backups.

    That originally shipped with 10.5.5 or 10.5.6, it is usually a good idea to have the original install disks for the particular build for disk repairs and such, you can check with Apple they will usually provide these for a small fee.
    Try Customer Service
    800-767-2275

  • Officejet 4635 "operating system files missing"

    I've installed the driver software for the officejet 4635 for windows 8 64 bit, but in setting the printer up it gives me the following error message:
    "Operating system files missing
    The following operating system files are missing and are required to install your printer. Please repair the files using your operating system CD and click Retry to continue installation:
    C:\Windows\inf\ntprint.inf"
    I've tried reinstalling the software. The computer seems to recognize the device as a fax, but not as a scanner or printer. Anyone wanna help me out? 

    Hi @pgreene88 ,
    I see that you are getting a operating system error, during the installation of the printer. I can help you with this.
    System File Checker is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files. Use the System File Checker tool to repair missing or corrupted system files.
    If you get the same results, please consult your computer manufacturer for further assistance.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Missing application support folder or how to recover a folder

    Hi,
    I've searched the forum and see a lot of information on missing files/photos/operating systems/applications, but I've been unable to find information to help me recover my "Application Support" folder. It is usually in System>Library but now its not there and I have no idea where it went. I've searched in finder and nothing has come up. I've tried the same within Time Machine but I suppose its possible that the folder has been lost since before my backup.
    Does anyone have any advice?
    Thanks!
    C

    It is usually in System>Library but now its not there and I have no idea where it went.
    It should be in /Library/ and ~/Library/, but not /System/Library/.
    (57021)

  • Error while running the ODI Scenario

    Hi All,
    I am trying to execute ODI Scenario from operator window getting below error. I am not sure why the error is comming yesterday it was running successfully.
    I checked the agent connection via test button, it is working fine.
    com.sunopsis.dwg.cmd.b: Error during Scenario launching : Error during Session Preparation : You are trying to execute a session with an agent that is undefined in your repository. Please check the agent -NAME parameter.
         at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
         at com.sunopsis.dwg.dbobj.SnpScen.remoteExecute(SnpScen.java)
         at com.sunopsis.dwg.dbobj.SnpScen.remoteExecute(SnpScen.java)
         at com.sunopsis.graphical.g.ot.m(ot.java)
         at com.sunopsis.graphical.o.z.actionPerformed(z.java)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
         at com.jidesoft.plaf.vsnet.VsnetMenuItemUI.doClick(Unknown Source)
         at com.jidesoft.plaf.vsnet.VsnetMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

    I'm guessing the name on the physical agent was different from the agent name of the process running on the server? That's generally when I get this error...

  • HP LaserJet Pro MFP M127fn - Windows server 2003 X64 Drivers Missing

    Hi,
    We have almost 80 Numbers HP 1212 MFP Printer which we are using in windows server 2003 X64 Operating System. Because of unavailablity of this model anymore, we are using HP Laserjet Pro MFP M127fn and the driver is missing for this operating system.
    Anyone have Drivers or any other solutions ?

    Hi Mike, Did you end up working your problem out? We have the same issue, prints fine from Windows 7x64 desktops via TCP, but it's a no-go on Server 2008R2. Cheers - John.

  • PR to PO conversion in operation subcontracting

    Dear friends,
    We are trying this scenario of operation subcontracting.
    I have a semi - finish material SM01 on which i m carrying 5 operations. The 20th operation is sub contracting. I do not want to maintain a separate material for this operation.  I have done all the necessary settings which are required. I m also getting a PR when a Production order is generated for operation 20.
    Now the problem is when i go to convert this PR to PO in ME58 the system gives me an error, "Not possible to determine any components".
    I do not understand where i have gone wrong.
    The PR document type that is created is NB.
    The PO does not take any material even if I try to maintain one.
    What can be the possible solution.
    Thanking all you for your kind assistance.

    Hi pankaj
    The concept is like that. You need to send a material out with gate pass to the vendor for that particular P.O.
    You might have issued the material from stock for the previous operation so that you will not have a component for that operation. There may be two options.
    Options 1) Create a dummy material with MRP type ND so that the planning will not happen and no plan order. keep stock through a movement type update. Allocate this component to the operation in your routing. If the external operations is pre defined.
    Option 2 )  Create a dummy material with MRP type ND so that the planning will not happen and no plan order. keep stock through a movement type update. Include this component in P.O while converting from PR. If the external operations is not pre  defined.
    The component will now appear in ME 2O
    Hope this is clear
    Regards
    J . Saravan

  • Hpqdirec.exe – System error. The program can't start because ATL90.DLL is missing from your compute

    Hello,
    The following has only transpired recently. It concerns Windows 7 and my C6380 All-In-One.
    It appears to be a registry issue. I am experienced and have tried even more than that listed below.
    On launching the "HP Solution Centre", I receive the following error message:-
    “Hpqdirec.exe – System error.  
    The program can’t start because ATL90.DLL is missing from your computer. Try reinstalling the program to fix this problem."
    Are you able to advise on how I can resolve this issue. Clearly, I want to avoid a complete clean install of my PC.
     What I have tried
    - Complete Install, Reboot, Install of the HP Software
    - Restore points
    - Running virus scanners
    - Windows "Start-up Repair"
    , - Running RegZooka

    I can think of a couple of possibilities here.
    One, if this was an upgrade from XP or Vista, then it is possible that the file is just not there in the operating system. Or if some other uninstallation removed it unknowingly. Not likely but possible.
    More likely, some sort of security software (firewall/antivirus/malware) blocked part of the installation. This could result in missing HP items and/or missing linkage to operating system necessities. You might try reinstalling with the security software disabled or off completely. At the minimum, with options to allow the HP installation full access during the install.
    Hope that helps.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Start Screen Layout missing icon

    One of the program I pinned to the Start Screen is missing. The program that's missing is the Opera browser. I created a custom start screen layout with all the programs I want in different namegroups. I put the AppsFolderLayout.bin file in the Default profile.
    I am preparing a Windows 8.1 image. I do this so all users can have the same Start Screen layout. The first time I did this, it worked fine. I logged in as new users in the computers and I see all the programs I pinned to the Start Screen. 
    Right now, I'm doing the exact thing for a new Windows 8.1 image. I placed the AppsFolderLayout.bin file in the Default profile. I logged in as a new user and many. The Start Screen is empty, other than the Desktop and Computer tiles, since it's a new
    Windows install, The programs that are pinned are not installed yet. When I install the programs, the tiles will populate to the Start Screen. All of them worked, except for the Opera browser. The Opera browser is not showing the Start Screen. I made sure
    the program is pinned before I exported the layout. The program is installed for all user.
    I checked the program is installed when I log in as different users. I
    even deleted the user profiles that was installed on and logged in again, the icon is still not there. 
    Would a new version of the browser cause this issue? I even installed the version I had when I first had it working and it didn't work. Let me know what would cause this issue.

    Hi,
    Please use the command “get-startapps” in powershell.
    We have tested. Every time we reinstall the Opera, the AppID will change.
    The AppID is the identifier of app. If it changes automatically, the Operating System can’t customize Start screen by different AppID.
    Please refer to the following article to customize Windows 8.1 start screen.
    Customize Windows 8.1 Start Screens by Using Group Policy
    http://technet.microsoft.com/en-us/library/dn467928.aspx
    If you change the AppID in xml file to match the ID in the PC you want to customize Start screen. The Opera will show out.
    Best Regard,

  • Routing & Reference Operation Set

    Hi All,
           Could you guys please help me to understand the following will be grateful
    What is the difference between Routing & Reference Operation Set?
    When the Routing will be used?
    When Reference Operation Set will be used?
    What are all the advantages and disadvantages behind using Routing & Reference Operation Set in prodution?
    At which Scenario Reference Operation Set is must?
    Thanks in Advance

    Hi,
    Routing defines the sequence of operations that should be carried at a work center to make up a product.
    In the operation you define the values for setting the machine and the machine time to prodduce a finished product for a particular base qty.
    Routing is one of task list in PP module to carry out the production of finished and semi finished parts. it consists operation sequence which requires for manufacture finsihed and semi finished parts like operation 10. 20, 30...
    Ref operation sets is use as template to create routing , rework order.
    These are four types...
    1) Routing and Ref operation sets (used is discreate manufacturing).
    2) Rate routing and Ref rate routings (used in repetative manufacturing).
    3) Recipe (used in process manufacturing)
    Ref operation sets are repeated operations can be use for several products. you have use these always in rotuings.
    For documents and PDF files you can download from the below link
    http://mysapbi.blogspot.com/2007/01/sap-help-in-pdf-files.html
    CA01 = Standard Routings
    CA11 = Reference Operation Sets
    CA21 = Rate Routings (used in Repetitive manufacturing only)
    CA31 = Reference Rate Routing (used in Repetitive manufacturing)
    Regards,
    R.Brahmankar

  • What is the cheapest way for me to upgrade from tiger 10.4.11 to the most recent operating system?

    Hi, just after i bought my laptop all them years back when tiger 10.4.11 was the operating system mac decided to release a new one just a week after my purchase, so the bitterness in me refused to pay for an upgrade. Years have gone by and hardly anything is compatible with my mac anymore...
    A friend said it could be up £300 for me to upgrade because I have missed so many operating systems... Please tell me there is a cheaper way?!? 
    All help very appreciated! Thanks for reading.

    Replace the RAM you now have with two 2 GB modules.  You can find the proper RAM at OWC or DataMem. OWC even has installation tutorials and any special tools that may be needed.

  • Reg:filter operator in is not like

    hi,
    can anyone tell how does the filter operator "is not like pattern" function in obiee answers?in what scenarios this operator might be used/
    thanks

    Hi,
    Filter:
    Its used to filter data from report.We apply filter on report as prompted to make prompt effective.
    Example :
    ColumnA is prompt then we apply filter is not like ('India','Singapore') then the report will display expect india and singapore country in the output the report as ColumnA is prompted
    Filters can be apllied on report in many with diff operators like not equal In order to select values dynamicaly from report and filter data from report we use prompt.
    Prompt - Its used to select specific values to be filtered from the report
    Thanks
    Deva

Maybe you are looking for