Missing something on stacks? The current pick isn't on top when closed

I'm a learner Aperture user and having fun learning it. Missing something at the moment though. I am working with stacks and promoting one image to the top of the stack, so it shows first in the group of shots. However, when I close the stack, the previous #1 keeps going to the top.
I've tried rating the pick higher than the others, clicking 'Primary Only' and various other things, but the same thing keeps happening: I can't get my new pick to sit on top of the stack when closed.
What am I doing wrong? Am I missing something obvious or have I struck a bug?

Sounds like the image that keeps going back to the top is an Album Pick. You can have different picks for different albums- which can be quite handy at time.
Select your pick then go to the stacks menu and choose "Set Album Pick". See if that works.
DLS

Similar Messages

  • TS1398 what is the trick with getting connected to airport WiFi?  It takes forever to go from the settings portion then to the browser to "accept" terms.  Am I missing something to speed the process?

    what is the trick with getting connected to airport WiFi?  It takes forever to go from the settings portion then to the browser to "accept" terms.  Am I missing something to speed the process?

    OK, I figured out from the various postings on here and way too many hours overnight how to pretty much make the Yoga do what it is supposed to do. I've written up a step by step at this link that may help some of you with your problems as well
    Let me know if this helps!

  • Is there a way to default the monthly calendar display so that the current day always shows on top?

    Is there a way to default the monthly calendar display
    so that the current day always shows on top? ie, I want to always be able to see what's in the future 3-4 weeks, not what's in the past 3-4 weeks. The default monthly display is archaic--only allows you to see through the last day of the month. Suddenly today
    is Oct. 30th, and I have a ton of projects lined up in November, but because I haven't been scrolling down every day, I haven't been aware of them every day. I realize there are other tools in Microsoft to help me stay on task, such as reminders and such,
    but it would be helpful if I could always have the current day display on top of the monthly view so I can quickly scan what's coming up in the next few weeks. 

    Thank you!
    Right, I already have it in Month view. My question is a little more specific--I'd like for the current day to always display at the top. For example, today is Oct. 31st, so the current day is at the bottom of the calendar since it is the last day of the month.
    I can view everything in October that I've already completed. What I can't see are the future weeks because we haven't hit November yet. I'd like for the current day to always display at the top of my calendar so I can always see what's coming in the following
    three - four weeks (whether they're a part of that month or not). I've been to other forums trying to find the answer, and have come across the same exact question from frustrated users--but there seemed to be no solution. So I'm posing the question myself
    in this forum. Do you know if this is possible? What I found from other forums is that Outlook defaults to a physical 'desk' type calendar format--so just as I'd use a paper calendar at my desk, I wouldn't be able to see the following weeks unless I either
    flip the page to that month or I come to the first day of the next month, thereby tearing the the old month off and now only able to see the current month. That format is just so...paper...and archaic! Essentially I want the calendars to loop so it doesn't
    even really matter what month it is--I just always want to see what lies ahead without having to scroll down. With our being in the Technology Age, I'd assume this is a logical expectation, but we may be stuck with the replica version of the paper-desk-calendar
    format until Outlook programmers add this Technology Age feature in newer versions.  
    See, this month kind of messed me up because I have so many projects for November that start tomorrow and next week, but I haven't seen them until this week. I would have been better quipped--at least expecting them--had I been able to see all of those projects
    since last week or the week prior.  
    If there is no solution to this answer, would you know how I can contact Outlook to provide feedback? I'm guessing a newer version is on its way...
    Thanks again in advance!

  • I used to have a close tab for exiting the current site I was on instead of closing all of firefox. How do I get it back?

    I used to have a close tab for exiting the current site I was on instead of closing all of firefox. It was a red box with an x in it. How do I get it back?

    Click in a blank space on a toolbar & open 'customize'. You'll find that there is a gray "x" (on my browser it's gray) that is for closing a tab. Drag it up to wherever you want on the toolbar & it should work fine.

  • KDMAT need to be included in the current VA01 selection screen or list when

    Hello SAP SD Consultants,
    Please help me with below requirement or what user exit should we use to implement below requirement.  I have discussed with with ABAP and gave some User exits that has related description, however, ABAP confirmed that none of below UE suits the requirement.
    1. AD010002 - Delimit selection and/or filter data that is determined
    2. CLCLRS01 - Additional Fields on the Result Screen
    3. CLCLRS02 - Fill the Additional Fields on the Result Screen
    4. V60P0001 - Data provision for additional fields for display in lists
    5. WVLB0001 - Display additional data in subscreen for simulation list
    Thus, kindly help us on how we can proceed with this.
    000----
    Requirement:
    The field  u201CCustomer-material numberu201D or field name KDMAT need to be included in the current VA01 selection screen or list when creating sales orders with reference from a contract.
    Currently, customer have its own description or material code to classify or define the product they want to order  which are sometimes not exactly the same as the material number maintained in the system or the product / material code used by the Company for sales. These material descriptions were manually entered in the system thru the use of customer-material number field or KDMAT. When sales orders or contracts are created for certain or specific customers, the user or the person who creates that contract / order manually inputs the description in the customer-material number field.
    The said entry should also be seen in the Selection List for Reference Document. The transaction to be modified is VA01 under program screen SAPMV45A specific to screen number 4413.
    Test Data used:
    Reference Transaction: VA41 (create contract), VA43 (display contract)
    Order Type: ZCQ (example)
    Contract No. 40000040
    Transaction: VA01
    Order type: ZOR (example)
    Contract No. 40000040
    a. Go to tcode VA01, input the order type ZOR, click the button CREATE with REFERENCE.
    b. Input the reference contract document, since our reference doc is a contract, go to tab CONTRACT and input the contract no..
    Expected output:
    Upon inputing the contract no. in the contract tab, click u201CSelection Listu201D.
    The customer-material number or KDMAT should be included as one of the field and should be displayed in the Selection List for Reference Document window.
    Edited by: ria sumagaysay on Mar 26, 2010 11:30 AM

    Hello,
    Thank you for the responce.
    The reason why they want to reflect KDMAT in the selection list is that, during order creation, not all materials or KDMAT will be ordered by that customer, only specific materials. However, during order processing, the customer only gives the details of the KDMAT. Thus, if there are around hundreds of items inside that contract, the sales personnel who creates the order needs to exclude those material not included in the customer order list manually via checking table VBAP and compare the material code from the selection list.
    This is very tedious on their part and commonly caused human error, however, when the KDMAT field is available, although the process has manual intervention, it will serve them well and lessen the burden.

  • PowerView Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later

    SQL 2012 SP 1 CU4 applied. Now getting " Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later"
    Any ideas what could be causing it to send the incorrect version?

    amaltsev1,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • If you check the don't show this again box when closing multiple tabs, how do you get it to warn you when closing multiple tabs, or to save previous tabs? Checking the warn me when closing multiple tabs box under tools/tabs does not work to solve this?

    I accidentally checked the do not ask me again box when closing multiple tabs. Now I no longer get a warning when closing multiple tabs, and it saves my previous session. I have tried checking and un-checking the warn me box under tools which has not worked. If I open a second window and try to close multiple tabs it will warn me but not on the first window.

    You can reset the warn prefs on the about:config page via the right-click context menu.
    browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
    browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
    browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

  • I accidently checked the don't ask me again button when closing firefox, how do i uncheck it?

    I accidentally checked the box that says don't ask me again when it prompted if i wanted to save and quit. However, i need it to ask me this so how do i un-check the box?

    First check the following setting. In the Tools menu select Options. In the Options dialog go to the General panel and make sure the setting "When Firefox Starts" is not set to "Show my windows and tabs from last time", you can set it to either of the other 2 choices.
    Now reset the 3 preferences that relate to warning when closing Firefox.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Find the following 3 preferences, right-click on them and choose '''Reset''' (if reset is not available they will already be at their default value)
    ## browser.tabs.warnOnClose
    ## browser.warnOnQuit
    ## browser.warnOnRestart

  • Something about getting the current Date!

    I am using this code to get the current DATE ...
    time=time + new Date().toString();
    the out put i get looks like.......
    Wed july 18 18:37:37 EDT 2001
    But i want to include the time in it ,meaning i want the out to look like.......
    Wed, July 18,2001
    i have no clue what to do next in order to get the desired out put.
    could some body please help me!

    java.text.SimpleDateFormat and others are made for you :) enjoy .....

  • Firefox is always asking to close the current version before I can search when I have already done this.

    At times I am on and off the net a lot and quickly. I will close out the current version. Then find I have to re-connect. When I try to activate firefox again I get this message that I have to close the previous version or re-start my machine. Can I stop this from happening? It is annoying and frustrating. Any suggestions would be appreciated.

    See "closing Firefox" in
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#close_firefox

  • Why doesn't the iPad pick up my camera videos when it syncs with my computer?

    Why doesn't my iPad pick up my camera videos when syncing with my PC?

    Some people have fixed this with a simple re-start of the phone, others needed to reset the Phone.
    Regards
    TD

  • Movement of the screen/top when closed

    Noticed something while wiping the top of the MB. When closed, there is some give/movement of the "lid" of the MB. When pressing left and right at the front corners of the computer the lid seems to move slightly. When I open the computer slightly however, there is no movement. I'm wondering if this just has something to do with the magnetic latches, or is this a defect. When the computer is fully open there is absolutely no movement of the screen.
    Anyone have any suggestions?? Thanks in advance for your help.

    If u live near a store i say bring it back if its within 12mths and show them first hand what is happening. I have a feeling you wont be the first and they should swap.

  • Am I missing something, Disabling stacks

    Obviously There's no way to disable Stacks in a traditional way. In an attempt to do so, I booted from Tiger, Replaced the "Dock" from Tiger to Leopard in /System/Library/CoreServices along with the prefPane
    replaced the dock.plst in User/Library & /Library from Tiger, and deleted com.apple.dock.db
    Restarted in Leopard, the dock was just as it was in 10.4. Folders viewed in a column as it did in Tiger.
    The problem: Apps in the Dock start but no animation or triangle showing there active. Apps not in the Dock never show up there when activated.
    Any ideas?

    Here's a slight workaround for the misleading icons and the inability to open the folder by clicking on the folder in the Dock....yes, Apple, you created an interface where putting a folder in the Dock then clicking on it does NOT open it, clever...really clever.
    The tip...put an alias of the folder into the folder and put a space at the beginning of the name so it sorts (using alphabetical order) as the first item. To be clear, say you want the Applications folder in the Dock, create an alias to the Applications folder and put it into the Applications folder, then put a space at the beginning of the name.
    This means your folder will display in the Dock with the correct (and unchanging) icon and if you click on it to open the stack then click on the alias it opens the actual folder. It's still 2 clicks instead of one but it's neater than Apple's default idiocy.
    Sorry it doesn't bring back hierarchical menus...
    If you dislike Stacks as much (or even a fraction) as much as I do please tell Apple so using the OSX feedback pages. If they don't know they won't change it - http://www.apple.com/feedback/macosx.html
    ADVANCED TIP : the quickest way to add the aliases is to open the folder window then, holding down the alt and command keys, drag the mini-icon from the top bar of the window and drop it into the window itself - instant alias in the right place - now put a space at the beginning of the alias' name and you're done.

  • I want to purchase a TV show for a season that starts next week, but the new season isn't posted yet, when will it be?

    I know the episodes wil not be available yet, but the option to buy hasn't appeared yet.
    When do new seasons tend to be come available for purchase? Is it day of, or should it already be there?

    They appear whenever the maker of the show releases them.

  • What's the likely cause of crashes that occur when closing webpages?

    I am experiencing frequent crashes in Safari -- almost always they occur when I try to close a webpage.
    After I click on 'Close,' for a few seconds nothing at all happens. Then the spinning beach ball appears on-screen.
    Inevitably, the beach ball doesn't disappear and I have to 'force quit.'
    Is there any information on what lies behind this particular type of crash in Safari?
    Thanks. Replies appreciated.

    It looks like Safari doesn't have enough permissions
    for a folder to write to. Try to open disk-utility
    and use the Repair-permission option on your local
    disk. This may fix the problem.
    Thanks but that was recommended recently in relation to an earlier set of crashes that may have been related to an outdated Flash plugin (since updated). I went through the 'repair permissions' process and initially it seemed to have worked. Maybe it did work, but not to prevent these other crashes, which appear to be from a different source (e.g., the first crashes shut Safari down instantaneously and put me back on the Desktop, no spinning beach ball, prompt for 'crash report' to be sent to Apple, etc. -- not so with this latest set of crashes).
    Assuming repairing permissions isn't something you normally have to do on an ongoing basis in order to keep Safari running properly, I'm guessing it shouldn't be required so soon again.

Maybe you are looking for

  • ICloud WINDOWS 7 64 Bit sync problem with calendar of Outlook 2010

    I am using iPhone 4S (IOS5) iPad 1 (IOS5) PC (WINDOS 7 SR1 32 bit, Cor-2-duo) & Outlook 2010, 32 bit, at home PC (WINDOWS 7 SR1 64 bit, Intel i7) &  Outlook 2010 version 14.0.6106.5005 (32-Bit), in my office together with iCoud for syncing my contact

  • ECC6 - ALV Grid Output Conversion Exit

    Hi, I'm creating a program in ECC6 to display the report in ALV grid by called FM: REUSE_ALV_GRID_DISPLAY. EG: Select field (TPLNR) from table IFLOT. Value retrieved are: ?0100000000000000029. However, the output doesnt do the conversion exit to chan

  • Center a report title in Matrix report SSRS 2008

    I have fought with my first Matrix report for about a week now. What a pain. Now of course when I seem to be close to the end I can't center my report title on the report. How do I center a title? Help please. Thanks. SSRS 2008.

  • Exporting application finished with error (when deploying)

    When deploying HFM application from EPMA, I get this error from job "Exporting Application ...": Process Name : dimension_server Thread : 10 Server : HYPSRV Detail : An error was encountered while executing the Application Export: Object reference no

  • Is there a program that can view .indd files?

    Besides inDesign or inCopy, I mean.  I'm aware that there are programs that will extract the preview thumbnails from the file, but are there any that will view the .indd file itself?  My manager doesn't want to spend the money on a copy of inCopy for