Missing/wrong data in XI from RFC in ECC 6

I'm having the following issue where I send data from an RFC in ECC6 to an imported RFC in XI. Below is my structure in SAP ECC 6 and I see this in my testing of the RFC in SE37:
ORG_ID       US12345
LOG_ID       OR123
PASS_WD   ABC123
TAXONOMY ELECTRONIC.ORDER
Below is a snapshot of the XML of the Inbound Message in XI:
- <rfc:_-EFI_TI076_SEND_PCARD_PAYM xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <S_AUTH>
<ORG_ID>US12345</ORG_ID> (Correct)
<LOG_ID>ABC123</LOG_ID>     (Incorrect)
<PASS_WD>mc.Application.PaymentN</PASS_WD> (Incorrect)
<TAXONOMY /> (Incorrect)
</S_AUTH>
Keep in mind the following:
1) I've imported the RFC from the sender system into XI multiple times
2) I've executed both ABAP and Full Cache refreshes
Thanks so much in advance for your help on this.
Regards,
John

Carlos,
Thank you again for the follow up. I have again checked the data in the RFC, and my problem remains that the data shows up in the wrong field. Also - I'm missing some data that should be in certain fields.
Thanks as well for the information on the Queues. The Queues look ok, and nothing is being held up there. The "green" messages are those that are sent into the XI system from ECC. There are subsequent messages after the initial inbound message, which indicate an additional web service error, of which we can resolve quite easily.
Thanks so much!
John

Similar Messages

Data Records are missing in between while loading from R/3 (ECC) to BI.

Dear Experts,
I have created a custom DataSource on Custom Function Module. This datasource contains 600 fields. (I know its a monster and splitting options are thinner).
1) Validate the data using RSA3 in R/3 and showed the correct record count.
2) Validate the data by debugging the FM, still showed the correct record count.
But while loading from R/3 to BI, records are missing.
Various Scenarios load from R/3 to BI:
1a) Loaded full load (78000 records) with all default data transfer settings. PSA showed up with 72000 records (missing 6000) only. Compared the Idocs vs data packets, both reconciled.
1b) Loaded full load (78000) with modified settings (15000 KB / data packet). PSA showed up with 74000 records (missing 4000) only.
2a) Loaded with selection parameters (took a small chunk) (7000 records) with default data transfer settings. PSA showed up only 5000 records (missing 2000).
2b) Loaded with selection parameters (7000 records) with modified settings (15000 KB / data packet). PSA showed up all 7000 records.
3a) Loaded with selection parameters (took further small chunk) (4000 records). PSA showed up all records regardless data transfer settings.
Also please look at this piece of code from the function module,
IF l_wa_interface-isource = 'ZBI_ARD_TRANS'.
l_package_size = l_wa_interface-maxsize DIV 60.
ENDIF.
I really appreciate your advise or help in this regard.
Thanks much,
Anil

Hi,
Which module u want?
if its SD(for example)
steps>>
1>In AWB goto "business content"
2> goto "Info provider"
3>Under infoarea select SD cubes
4> Drag related cubes and ODS to right panel
5> Set the grouping option "In Data flow before&afterwards"
6>Install the collected objects
Go to R/3
7> Use Tcode RSA5 Transfer all regarding SD module datasources
Goto BW
8> Right click on the source system "Replicate datasources"
[DataSources|http://help.sap.com/saphelp_nw70/helpdata/en/3c/7b88408bc0bb4de10000000a1550b0/frameset.htm]
Edited by: Obily on Jul 10, 2008 8:36 AM

Photos on my Mac show the wrong date when imported from a portable Hard Drive

I’ve got loads of photos that I had imported from my old PC.Last night I decided to start going through them and trying to get them sorted
prior to importing into iphoto. I discovered that some of the pictures (in particular ones I have taken from my old Iphone) all had the same date and time
assigned to them. When I checked the Exif details, it listed the correct camera etc, but the date created seems to have changed to the date I copied them to my portable hard drive.
I thought this was strange as when they were on my PC I thought they were correct. I booted my PC up and checked the portable hard drive on Windows. When viewed on my PC the pictures all have the correct time and date assigned to them. However when I plug the same portable hard drive into my Mac the same files show up as being created on a more recent date (say 20th Jan 2013).
I’ve done a lot of research last night, although I can find no forum with this exact problem, I feel it must have something to do with compatibility. The portable hard drive is FAT32, and I am assuming that in order to ensure all of the photos information is transferred correctly in needs to be NTFS.
The problem I have is how do I transfer my files again from my PC to an NTFS drive, whilst keeping all of the correct date and time information assigned to the photos. My understanding is that the 2 aren’t compatible.
Has anyone ever had this problem? It mainly seems to be with photos I have extracted from my Iphone or edited in some form by rotating them.
I have a 13" Macbook Pro Retina with OSX Mavericks installed.

What you may want to do is archive as a Zipfile the photos and then transfer them to the Mac.     It is possible some of the metadata is being lost on the FAT32 formatting.    USB Flashdrive might work better than a FAT32 formatted hard drive, as I do know that most USB Flashdrives are formatted about the same as SD media cards, which manage to preserve the data when copied from camera to Mac.    My big question is, do you still have the photos on media cards? You might just want to get a media card reader on your Mac, if the photos are not on SD cards, and transfer them over with the media card reader.
I do believe Retina MacBook Pros all have SD card readers built-in.
Note: I've asked this be moved to the MacBook Pro forum. MacBook without the secondary name refers to the consumer notebook Apple stopped making in 2011.

Sales Area Data isnt replicating from CRM to ECC

Hi Gurus,
We are replicating some BPs of certain groupings from CRM to ECC.
We performed all steps relevant for this task mentioned in Best Practice u201CMaster Data Replication C03u201D. After performing the
steps results are as follows:
u2022     BP General Data is replicating without any trouble.
u2022     When registering sales area data in CRM and trying to get this replication to ECC we see that the BP Sales Area data isnu2019t replicated.
Monitoring SMW01.
The BDOC BUPA_MAIN ended with the following error:
Messages for business partner 0007000362: Fill in all required entry fields
Action already taken:
After reading this message I have reviewed the mandatory fields per Account Group in ECC and mapped them with the CRM ones. Even this changes I still can get sales area data in the ECC BPs replicated.
Is there something I am missing here.
Thanks for your help.

Hi,
Regarding debugging from CRM to R3. Please follow the below steps.
There are 2 methods to debug the Business Partner (BP).
First Method:
1)     In CRM, Go to SM59 -> ABAP Connections => The ECC client -> See if the saved user (in logon details) that is used to connect to ECC from CRM is a Dialog user.
2)     You can use transaction code SU01 to check User Type of User.
3)     Deregister the Queue through SMQS.
4)     Make changes to BP.
5)     Go to SMQ1, Select the Queue name Double Click 2 times then select the Tool bar (Debug LUW).
Second Method:
1)     Put a break point in Function Module SMW3_MFLOW_UPDATETASKBDOC.
2)     Create a BP and before save, type /h to activate debug, Mark update debugging option.
3)     When stops in Function Module u201CSMW3_MFLOW_UPDATETASKBDOCu201D you must be sure to set header-dbgmode = 'X' this will make the BDoc stay stopped in SMW01.
4)     Go to SMW01 and type /h and process the BDoc.
5)     Put a breakpoint in Function Module u201CCRM_UPLOAD_AFTER_MAP_HANDLERu201D and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
If the variable LV_SYNCHRON does not have any value, then it will work as background task, if the value is filled with the value u2018Xu2019, then it will allow debugging in R3.
And another point to be noted here is, the user type of the R3 should be Dialog User. If the user is not dialog, then it will not connect with R3.

Wrong date when synchronizing from Photoshop elements 3.0/4.0

When I synchronize my photos from photoshop elements (I have tried both version 3.0 and 4.0) the dates displayed above the thumbs in the different folders become February 2040.
I have put my photos in different collections in PE which are recognized nicely within Itunes. I turned on the "enable disk use" and "include full-resolution photo" options. I can also see that the database structure built within the Ipod is correct (year->month->day) still the date displayed above the folders when scrolling through the thumbs is incorrect.
I have been busy quite a while now, but I can't find the answer, anyone there who knows the solution?
ipod Other OS ipod

I am experiencing the same thing. Regardless of what photos I sync to my iPod 60GB, the date on top is always February 2040!
iPod / Windows / Photoshop Starter Album ver 3.0 Windows XP Pro

Error while running the RFC on ECC 6.0 server

Hello Champs,
The problem I am facing while sending the data for validation and invalidation from RFC on ECC server to Pi server to be send to a webservice. This scenario was working perfectly fine when the RFC was run on R/3 4.7 server. On upgradation of R/3 server to ECC 6.0 server we found the folowing error while we run the RFC on ECC server.
alternativeServiceIdentifier:party/service from channel configuration are not equal to party/service from lookup of alt ..
I have also re-imported the RFC's from ECC server to PI server and activated it again to overcome this problem, but still I am getting this error. Also I have done the CPA cache refresh too. But the problem still persist.
Some times when we keep on clicking on this error continously then we are able to get the desired results ie either valid or invalid. Is there something which needs to be done when we migrate the RFC from R/3 server to ECC server? Pls let me know how to solve this problem... Any help on this on priority basis is highly appreciated.
Thanking You in Advance.
Regards
S Joshi

Dear Rajesh,
I did the activity as suggested by you but still I am getting the same error while sending the order ID number from ECC 6.0 server. But when check the error in the Moni transaction I am getting the error as follow:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Not enough message parts were received for the operation.
This indicates that there is a problem on the receiver side.. Pls guide me......
Thanks
With Best Regards
S Joshi

I synced my IPhone but OK'd the wrong button (back-up from old IPhone) and deleted all my data, such as contacts, pictures, videos, notes etc. How can I get my data back, restore all my lost file?

I connected my IPhone 4 with my PC/iTunes to transfer my pictures/viedos to my PC. Unfortunately, I clicked on the wrong button when asked to sync with the old back-up files and ll my data werde deleted from my IPhone.
Is there a program for the IPhone -as it exists for my Windows PC- to restore the data by chosing the date and time when datas are lost?

Hi Khuram1981 - thank you thank you thank you! All sorted! dont suppose you know how to fix another problem I have??? for weeks now, since updating to ios5 I think, for some reason every time I have tried to log onto app store it says CANNOT CONNECT TO ITUNES STORE. It's nothing to do with my computer, and I've been to the Geniius bar but they couldnt help and nothing I seem to do lets me update my Apps and even worse, I cant even buy any more. Any suggestions?
Again thank you SO much for helping with other problem = a real relief.
Chatterwind xx

Why do i keep getting "image is missing preview data" when trying to move files from bridge to PS ??

I am not able to move multiple files to PS...regardless whether I am doing HDR or panorama.....get this "image is missing preview data" with the first file number of the series of files.
#missingpreviewdata

You don't "move" anything from Bridge "into" Photoshop. You use Bridge to call on Photoshop to come and open the file(s), and Bridge simply hands the files over to Photoshop.
The problem lies in how the files are being processed and saved.
No one can help you until you provide complete and sensible details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Reg: Proxy error while fetching data from RFC's

Hi All,
I am fetching data from RFC's. When the data is in bulk I am getting an error like:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /webdynpro/dispatcher/sap.com/pb/PageBuilder.
Reason: Error reading from remote server
When the data is samll only I am not getting any error and am able to fetch it easily. Please suggest me something in this regard.
Thanks in advance,
Gaurav

Hi Detlef / Gowtham,
Now I am able to fetch data from flat files from OWB Server as well as OWB Client.
One way I have achieved as suggested by you
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copy all flat files on OWB Server
5) Updated the location which I created at the client.
Other way
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copied flat files on the sever in same drive & directory . like if my all flat files are on C:\data at OWB Client then I copied flat file C:\data on the OWB Server. But this is feasible for Non-Windows.
Hence my problem solved.
Thanks a lot.
Regards,
Manmohan

Uploading photos from PC to Photo library results in wrong date/time

Uploading photos to iCloud photo library using icloud.com will result in wrong date/time of the photos, which is, to be precise, 15 hours later than the actual time in EXIF. Thanks in advance.

iTunes is not a photo management program, never has been.
Delete the pictures (or remove them from the folder that syncs). This has absolutely nothing to do with iTunes.
If the Photo tab is not displaying in iTunes, resize the window.

JSObject returns wrong date. How can I extract correct date from digital signature?

I'm trying to extract name and date from digital signatures by using JSObject in Excel VBA, but JSObject returns wrong date. Year, month, hour and minute are correct, but only day is incorrect.
Here is my code. I'm using Acrobat 8.1.3.
Please tell me what's wrong with this code and how I can extract correct date from digital signatures.
Public Sub sbTest()
Dim oApp As Acrobat.acroApp
Dim oPDDoc As Acrobat.AcroPDDoc
Dim jso As Object
Dim f As Object
Dim sig As Object
Dim strFileName As String
Set oApp = CreateObject("AcroExch.App")
Set oPDDoc = CreateObject("AcroExch.PDDoc")
strFileName = "C:\Test.pdf"
If (oPDDoc.Open(strFileName)) Then
Set jso = oPDDoc.GetJSObject
Set f = jso.getField("Signature1.0")
Set sig = f.signatureInfo()
Debug.Print sig.Name
Debug.Print sig.Date
End If
Call oPDDoc.Close
Call oApp.Exit
End Sub

Hi
You can use TDMS file format to save the data. I have attached a reference Vi.
On button click you can log the data or remove the case structure and continuous log the complete acquisition data.
Thanks and Regards
Himanshu Goyal
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!
Attachments:
Data Save in File.vi ‏35 KB

If the connecting fields are missing the data from knvh should be u00BBnullu00AB

Could you help me I would like to have all fields from kna1 (if the connecting fields are missing the data from knvh should be »null«)in following code
select * from kna1 .
select * from knvh where kunnr = kna1-kunnr and vkorg = '0200'.
itab-mandt = kna1-mandt.
itab-stceg = kna1-stceg.
      itab-hkunnr = knvh-hkunnr.
      itab-datab = knvh-datab.
      itab-datbi = knvh-datbi.
    append itab. clear itab.
endselect.
endselect.

HI,
use the following code
select * from kna1 into table it_kna1.
if sy-subrc = 0.
select * from knvh into table it_knvh
for all entries in IT_kna1
where kunnr = it_kna1-kunnr
   and vkorg = '0200'.
if sy-subrc = 0.
loop at it_kna1 into wa_kna1.
itab-mandt = wa_kna1-mandt.
itab-stceg = wa_kna1-stceg.
loop at it_knvh into wa_knvh where kunnr = wa_kna1-kunnr.
itab-hkunnr = wa_knvh-hkunnr.
itab-datab = wa_knvh-datab.
itab-datbi = wa_knvh-datbi.
append itab.
clear itab.
endloop.
endloop.endif.
endif.
I hope this solves your problem
Regards,
Vara

Ssis data flow item and ssis control flow item tab missing in choose toolbox item from ssdt 2010

ssis data flow item and ssis control flow item tab missing in choose toolbox item from ssdt 2010

I have the same problem.
When i click on tools -> choose tools Items dialog box, Control Flow and Data Flow Tab are missing.
I've just worked with SQL Server Data Tools and SQL Server 2012 and these tabs are not missing.
i think this is a problem installing SQL Server.
I've not yet found a solution.

Wrong data export from ID to PS

Hallo,
I have a strange problem pasting placed eps images in ID back to PS.
If I mark (correct name, path and image look) placed eps images in ID CS4 and paste them into a new file at PS wrong images show up! They exist in the same document but are other than marked. But in the created PDF file everything is OK.
On the other hand, if I open the same created PDF file with IL and mark the same images and past them to PS the correct images are shown???? What can be the reason?
Thanks for any comment.
Regards Edzard

By "mark" do you mean select?
Presuming you do, you should not attempt to copy/paste the image from ID to Photoshop. Instead select "edit original" from the context menu or the links panel. That will open the selected image. You may need to use "edit with...) instead if the wrong editing application opens using edit original.
I really don't know why the wrong data would be opening in Photoshop. Is the correct image highlighted inthe links panel? If so, is this happening in all documents, or just a particualr file? You might want to try the links listed in the "Troubleshooting 101" box at the top of the discussions page, up a level from here.
It may also have to do with .eps which is an archaic format for working in ID and is known to cause problems from time to time. Saving as .psd or .tif instead should fix that sort of issue.

Problems Displaying data from RFC on Adobe Forms

Hi,
I have some Problems with creating an Adobe Form and hope, someone can help me or give me some hinds to some tutorials, which can help me.
I'm developing an webdynpro-application which get data from a R/3 via RFC-Call.
Context-Binding and so on is done and works. I created also an interactive form and can display some datas on it.
Here my questions:
I have an field 'unit' which shoulb be displayed on several positions onto the form. My problem is, i can display it only once. If i copy the field, there is no output in it. What can i do, to solve the problem?
From the RFC i get a table with several rows of data, i want to display on the form.
With drag&drop i can place the fields onto the form but they are displayed only once. I want one line for every row from the table.
What do i have to do? Are there tutorials which show the steps?
When I am not using a form, i can display the data from RFC in a table with no problems (i create a table ui and choose create binding from context menue). Are the nescessary steps for displaying the data on an interactive form the same.
I read something about creating a dynamic form design. Do i have to create it? What are the steps i have to do.
Many questions, but i hope that someone can give me some helpful hints.
Many thanks
Mathias Lange

Hi Mathias,
If I caught you correctly, you want to display data in Adobe forms in form of tabel, right?
So, follow the steps:
1. Insert one sub form on your adobe form.
2. Set its type as "flow content" in object->subform property.
3. Set flow direction as "Table".
4. Insert another subform inside this subform.
5. set its type as "flow content" and flow direction as "Table row".
6. Now, choose binding tab, and there check "repeat subform for each Data item check box" and specify min. count for your rows.
7. Now, insert your column fields inside this sub form once.
8. Format its look and feel as you want.
When you run this application, it will show you multiple data as table on Adobe form.
Regards,
Bhavik

Missing/wrong data in XI from RFC in ECC 6

Similar Messages

Maybe you are looking for