Misunderstanding library or a bug in AP 3?

When I installed AP3 I imported a number of photos into a project then created albums within the project and "copied" the photos into the albums to organize them. This was a couple of days ago. Today I imported more photos to the same album and tried to "copy" them to one of the albums - but they would not copy. I created a new album within the same project and the photos copied to that fine.
Am I misunderstanding something, is there a bug, or what? Thanks for any help.
Tom
(Ap3 running on OS 10.6. on an iMac (2.4 gh intel core duo, 4 gb ram)

lovinmymac wrote:
You should be very specific about when you import photos into an "album" again. You import photos into a Project. Then you can create an Album and "tag" or "mark" pictures from your Project to be used in the Album. One way of doing this is to drag a photo(s) from your Project into an Album.
I always create a new album within a project and import to that selected album while renaming the photos on import. Saves a step and works well. I import additional photos into the same album when I want to change the name of the photos to be managed by Aperture. Again no problem. For example, if I was shooting a "Punch and Judy" show, I could select all the pictures of "Punch" to import to the album and then select all the pictures of "Judy" to import to that same album.

Similar Messages

  • Metadata Navigation and Library Column Filter Bug

    To whom it may concern,
    When document library metadata navigation is enabled and a user clicks an item in the metadata navigation part, the library updates to reflect the selected filter. Subsequent filtering actions performed on columns in the library do not filter the list
    further. For visuals refer to the thread below.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ab5c7d15-14e7-470a-8120-71d049a104d3/list-metadata-navigation-and-columns-filters-not-working?forum=sharepointgeneral
    My reason for re-posting this is 2 fold.
    1. The answer to the thread above is not an answer, it is a work around.
    2. Presenting the option for a user to continue filtering a view, but having that option do nothing is a bug. The option should be hidden, or it should perform the expect action.
    Please either inform me of an expected timeframe for resolution, or point me to an exacting set of steps to take in order to escalate this issue to someone who will take action to fix it.
    Thanks

    Hi,
    According to your description, my understanding is that column filtering cannot work after filtering on the managed navigation in SharePoint.
    I tested the same scenario per your post in my environment, and I got the same results as you got.
    We will help to submit the issue to proper pipeline for you.
    Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay. 
    Appreciate your time and patience.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Random iTunes library problem or bug with duplicates

    iTunes (Mac) spontaneously creates duplicate songs and does some unusual things in the process. The duplicate songs only appear in my library, the music media remains intact most of the time. Sometimes iTunes moves one or two songs from the same recording to a separate folder and puts in outside the iTunes Media folder.
    The duplicate songs that appear in the library appear randomly. Sometimes both dup songs play fine, even though there is only one source file for the song. Sometimes only one plays, so I have to delete the one with the exclamation mark. Often one of the 2 dup songs has the wrong artwork. This wouldn't be a big issue if I didn't have such a large volume of music and this wasn't happening to hundreds and hundreds of songs, which need to be dealt with manually one at a time.
    I have several music folders (CD , Downloads) inside the Master iTunes Media folder on the ext HD
    In iTunes Perfs I have enabled "Keep iTunes Media folder organized" and "Copy files to iTunes Media folder." This setup worked fine in the past, before 2010.
    I've repaired permissions regularly and have repaired the Boot HD.
    I first starting noticing this problem at some point in 2010 while using iTunes 9. Upgrading to iTunes 10 has not helped.
    Any ideas on what's going on or what I might try to fix the problem?
    Is this a bug in iTunes?
    If I re-installed iTunes and could return to an earlier version which one should I use ?
    Specs. iTunes 10.3.1 with 350 GB of music on an external HD

    Thanks for taking the time to respond to my question.
    I need some clarification on your instructions. Once I have Exported my Library to the desktop and moved my iTunes folder to the desktop I can't proceed as you suggest.
    When I open iTunes it opens the original library full of all my music. If I launch iTunes (while holding down C key) I can create a new empty iTunes Library inside the Music folder.
    If I try to import (open) the original Library.xml file on the desktop nothing happens. If your saying I need to import all the music in my iTunes folder (inside the Music folder) I can't do that since all my music is on an external HD.
    Are you saying I need to reimport the entire contents (all the music) in my iTunes Media folder?
    I thought your solution was aiming to simply rebuild the directory structure while leaving the original music media alone.
    Thanks for helping clarify.
    Or could you point me to a support.apple.com/kb article?

  • Common Library HTML Combobox Bug in FW CS6

    If you drag a Combobox from the Document Library > HTML folder onto your canvas and change the name of the 'Label' text from within Symbol Properties then the combobox artwork disappears! The label remains visible but the graphic symbol has gone.
    EDIT: Its suddenly started working properly. No idea why!

    I have now also tried this using an Object tag in a HTML page to load the SWF and I don't have the same issue, the problem only appears to be there using SWFObject and also another JavaScript solution that I found. In your opinion where is the most likely place for the bug to be? It would seem to me that the FlashPlayer should be handling the result of FlexGlobals.topLevelApplication, but the method of adding the SWF to the HTML page seems to have an affect as well. Looking at the FlexGlobals and spark.Application code, there doesn't seem to be any ExternalInterface type calls.
    I am asking as I am finding it difficult to work around the issues I am having, and it would be better to find a fix rather than a workaround.

  • Library indirect jump bug?

    I wanted to get oratcl running and experienced "core dumps" all
    the time. A bit of investigation indicated that the small code
    snippets that essentially do jumps to the real code via
    jumptables (in the client object libraries) will be relocated
    with an incorrect offset into the jump tables (one off).
    I patched the library binaries to handle this, and now it works
    very well.
    If this is a problem for other people, I do think that the Oracle
    maintainers will easily find and fix the problem, based on this
    info.
    I am deliberately a bit unspecific about the details of my fixes,
    in this mail, since the code is Oracle's, so I will not send
    copies of my patched libraries to anyone, i.e: please don't ask
    (unless you are Oracle Inc, of course...)
    Bjorn Ekwall <[email protected]>
    null

    Sorry for following up on myself, but I just saw that there
    already is a patch available (patch-2).
    My only excuse is that I was in China when I discovered (and
    fixed) the bug. Since I had some trouble connecting to Internet
    from P.R.C. I missed the patch, and was too overcome by jet lag
    to search carefully enough on this site, now that I'm back in
    Sweden...
    Bjorn Ekwall <[email protected]>
    null

  • Library image swapping bug.

    I have been developing a flash demo of my companies product for the past few weeks.  I upgraded recently to Adobe CS5 from MM Flash 8 so that I could recover some newer Flash components that were developed in a newer version.  This all seemed to go with out any issue.  However, once in CS5, I noticed twice that an images switched to another image in the library.  So I had two copies of the image and one image that went missing.  I solved this by just updating the image that was corrupted. 
    I was on a crunch for this project and was working 16hr days, so I just left my computer on over night with CS5 open.  I published the presentation and sent it for approval.  Once everything was approved closed CS5.
    When I reopened it many, (around 30ish) of my images have been corrupted the same way.  I went back to my previous backups and the last 8hrs worth also have the corruption.
    My questions are:
    Is this a known bug?
    Is this something I can easily and permanently fix in this demo or as long as I use it will it keep on screwing up?
    Is this issue only with images or is my action script also likely to be corrupted?
    Thanks

    I also noticed that the images that didn’t get corrupted were the ones that were added after I last moved my FLA.  I believe the reason for this, is that even though the images are stored in the FLA, it tries to update them from the last known update path.  If it can not find the image there it substitutes the next image in flash folder structure that has an image located in the update path.  If I had time to play with it I would temporarily replace all the images on the hard drive with one not used in my project to see if they get used as well as doing other things to prove my theory one way or the other.
    I did test the theory with the first image I fixed, which reloaded correctly when I restarted Flash, but I have not looked at the project since I fixed the rest, so I hope I am right.  By the sounds of what you are saying I am very worried.
    Another thing I would like to test, would saving as CS4. Closing and opening then saving as CS5 solve the issues.  One thing I don’t really know, what is lost when saving as CS4?
    Thanks again for your help, if any further corruption occurs I will follow your advice.  I will also let you know if I find any more stable way to work around this bug. Or if I find the exact cause.
    Thanks again

  • Image Trace with Document Library palette feature - bug?

    I've been trying out the different palette options in Image Trace and I believe I've come across a feature that does not work as the designers intended. In Adobe's documentation, there is very little said about the feature, which I believe is intended to allow you to substitute a custom palette for the palette that would be created by the original artwork that is being traced. It's under the Palette drop-down menu and is available if you've selected the Color Mode. It's called Document Library. In Adobe's documentation, there are these two paragraphs:
    [Reproduced from http://helpx.adobe.com/illustrator/using/image-trace.html#tracing_options]
    Palette
    Specifies a palette for generating a color or grayscale tracing from the original image. (This option is available only when Mode is set to Color or Grayscale.)
    To let Illustrator determine the colors in the tracing, select Automatic.To use the document swatches as a palette for the tracing, select Document Library.
    This would be a great feature, if it worked! I have a lot of artwork to trace, it's all in a set yellow-to-green palette, and it would be a big time-saver if I didn't have to change the palette after the trace. Unfortunately, the feature doesn't work as promised. Either that, or I'm doing something wrong.
    I've embedded a video to demonstrate the problem, and would appreciate any comments.
    Message was edited by: pixelboss to include link to the documentation

    What I started with:
    What I expected
    (but in a different palette):
    What I got:
    Do I really need to describe what I don't like about these results?
    Since the original experiment, I have tinkered with it and discovered that the more colors I have in my palette, the better. I had three colors; it only used one of the three. With some settings changes I could get it to use two. With six colors, it used four. I was unable to get it to use all six.
    I apologize for the poor quality of the original rendering of the video. I have since re-rendered it. Embedded below, but if you still cannot see what is going on, I recommend you click on the direct link and go to YouTube, where you will be able to either use the Large Player feature or make the video full-screen. Hopefully that will make it possible to see more detail.

  • Replace LabVIEW Library (lvlib) (poss. bug?)

    Hi All,
    I'm, trying to use lvlibs for shared code. Now i have some issues in version management.
    This is what I face:
    a library in a construction folder, which is copied (including sub-vi's) to a read-only version specific folder:
    -CurrentVerions\workspace
                                 -libraryproject.lvproj
                                 -library.lvlib
                                 \subvi's
     This tree I copy to:
    Version xx
    so this is the end:
    Version 2\workspace\
                                 -libraryproject.lvproj
                                 -library.lvlib
                                 \subvi's
     This directory I make read-only.
     Now if I upgrade the library to version 3, I want to upgrade my calling projects as well. So I remove the lvlib reference in the calling project, and inserts the new version (since replace is not an option).
    So far so good.
    Now if I open A VI with some controls/vi's from the library this is the message I get:
    lookup table.lvlib
    - The control expected to be at "N:\Account\NedTrain\ATBEGValidation\Lookup table\08-Delivery\V1.4\LabVIEW 8.0.1\Workspace\VIs\Defaults.ctl" was loaded from "N:\Account\NedTrain\ATBEGValidation\Lookup table\08-Delivery\V1.3\LabVIEW 8.0.1\Workspace\VIs\Defaults.ctl".
    lookup table.lvlibefaults.ctl
    - The library expected to be at "N:\Account\NedTrain\ATBEGValidation\Lookup table\08-Delivery\V1.3\LabVIEW 8.0.1\Workspace\lookup table.lvlib" was loaded from "N:\Account\NedTrain\ATBEGValidation\Lookup table\08-Delivery\V1.4\LabVIEW 8.0.1\Workspace\lookup table.lvlib".
    So what happens, he sees there is a part from the library (lookup table.lvlib) with a control (defaults.ctl) which is updated, but what LV does is take the old version (1.3 over 1.4), in addition the control gets the message that he is binded with the new library (1.4 over 1.3).
    So it looks like the control in the VI is path-bound and not namespace-bound.
    Does anybody have a solution (not a version control package), or is this like it is supposed to be?
    I can manually track down where the control should come from but what if I expand my libraries to 50 or more VI's/controls
    Thanks,
    Ton
    PS I got triggered only because i made the folder read-only, I don't want to know what cross-links I have elsewhere
    Message Edited by TonP on 06-14-2006 09:57 AM
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

    Hi Ton,
    This is because LabVIEW identifies each VI based on it's location and the Library (.lvlib) it is part of. (LabVIEW stores a relative path to the VI, the VI knows to which library it belongs). If LabVIEW can't find a VI at that location which is part of the correct Library it will search for it in it's search path. If it still can't find it, it will ask the user for help (Ignore / Browse / Cancel dialog). If you choose to browse and select another VI, All Intanceses of the original VI will be replaced by this VI. LabVIEW does not replace the other references to the Library because it could be that juist one VI was removed from the Library.
    You can workaround this issue by using a intermediate library. So you have the following for two versions:
    \Library\v1.0.0\driver v1.0.0.lvlib {and files}
    \Library\v2.0.0\driver v2.0.0.lvlib {and files}
    \Library\Current\driver.lvlib {and current files}
    In all the Applications that use this 'driver' library you include the 'driver.lvlib'. If you want to build a new version of this driver you duplicate the v2.0.0 folder in a v3.0.0 folder and when this version is ready for release you copy the library from folder v3.0.0 into the Current renaming it from 'driver v3.0.0.lvlib' to 'driver.lvlib'. This can be done easily using 'Save As' on the Library file or using the 'Save a Copy' method with VI Server (See attached Example).
    A down side to this is that all application will be using the new version. Instead of using a current folder you could choose to copy the version you would like to use with a application to the application folder tree and maintain a copy there. This way you can choose per application if and when you upgrade to a new version.
    In the attached example
    Look at / run the 'Application.vi'. this uses version 1.0.0 for the Driver.lvlib. (in this case the copy is maintained in the applications own folder tree).
    Close this VI and it's project file if you opened it.
    Open the Replace Library.vi
    Select '..\Application\Driver\Driver.lvlib' as the Library to be replaced.
    Select '..\Driver Versions\v2.0.0\Driver v2.0.0.lvlib' as the new version of this library.
    Run the 'Replace Library.vi'
    Look at / run the 'Application.vi' again.
    Hope this help.
    Karsten
    NI
    Message Edited by KvZ on 06-23-2006 04:41 PM
    Attachments:
    Example1.zip ‏123 KB

  • Itunes library no longer sticks to highlighted artist/album

    this has happened only after the recent update. not sure if this makes sense but here goes... if i want to listen to a particular artist/album, i highlight it on the main library window. while listening to the artist/album, i usually browse the other windows/playlists/etc. when i switch back to the library, the artist/album is no longer highlighted and my entire itunes library is displayed. bug or new "feature"?

    Noticed this also.
    Not sure if it's either.
    Sometiumes programmers put features in applications which are not documented or are not required.
    If this is the case, it's neither a feature or a bug. It's just not there.
    Tell Apple here -> iTunes application feedback

  • NWDS SPS 09: Jars not in external Library - Patch available?

    Hello experts,
    I am facing the problem described here:
    https://forums.sdn.sap.com/click.jspa?searchID=131779&messageID=2755058
    The result of the discussion is that the jars not being included in the external library is a bug of NWDS SP 9.
    Is there already a patch available? I searched throught Service Market Place but there is only a patch for Developement Infrastructure (DI Build Tool).
    Thanks for help,
    Enrico Lenk.

    Hi Maksim,
    Here you are the content of application-j2ee-engine.xml from EAR project
    <?xml version="1.0" encoding="UTF-8"?>
    <application-j2ee-engine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="application-j2ee-engine.xsd">
    </application-j2ee-engine>
    And just in case, content of ejb-j2ee-engine.xml from the EJB project
    <?xml version="1.0" encoding="UTF-8"?>
    <ejb-j2ee-engine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ejb-j2ee-engine_3_0.xsd">
    </ejb-j2ee-engine>
    Libraries i'm using are: mdm-admin.jar, mdm-common.jar, mdm-core.jar, mdm-data.jar, mdm-extension.jar, mdm-protocol.jar and mdm-publishing.jar
    Not sure what's the prefered option, if use these libraries as external jars or add to my project as dependency
    Thanks a lot in advance
    Pablo

  • Photo Library Question

    I'm confused about the photo library. I have a folder on my drive just called Pictures and when I tell Itunes to use this folder and sync it to my iPhone I end up with another folder called Photo Library with the same pictures? And no matter what I do I can't delete those folders.
    Thanks

    @Kasen, Looks like everyone is having same problem.
    I hope they fix this bug soon.
    @Roaminggnome, this is not how "Apple handles photos".
    If you load a photo to iPhoto, it will sit in the generic library.
    You can then create albums, which like iTunes playlists are essentially just "shortcuts" to the original file in the library.
    This bug with the iPhone album in ios 5 is different.
    In iPhoto, the albums depends on what is available in the library.
    In ios 5, the library depends on what is available in the album.
    In ios 5:
    If you create an album called "test 1" in iPhoto, and sync "test 1" to iPhone throu iTunes, you will see a "test 1" album in iPhone along with all the identicle photos in "test 1" in "photo library".
    If you then create an album "test 2" on your iPhone, and copy all photos from "photo library " to "test 2", you will now have 3 folders on iPhone displaying all the same photos.
    If you then go back to iTunes and uncheck the original option to sync "test 1", and resync your phone, you will end up with an empty "test 2" album on your iPhone and nothing else, photo library gone included.

  • Avoid MathScipt Comments in EXE, Build & Run Problems - NI Please Fix these Bugs!

    Hello,
    After 4 days of intensive work, I have finally found the solution for two major MathScript Problems:
    1) Mathscript Comments are included in your EXE File !!
        - Yes, if you do not watch your steps, the EXE will include all your % Mathscript Comments!
    2) Problems building, but even worse: An app that builds with NO Error and NO Warnings will not RUN and creates the following misleading Erro Message:
        "The VI is not Executable. The full development version of LabView is required to fix the errors"
        With absolutely NO hint to what VI have the problem.
    I have made myself an internal note how to avoid this problem. I am using LabView 2009, 2010 DS1 Release (I think this is 9.01) under WInXP SP2.
    Rather than retyping everything, I will post the full text of my Notes below. I also mention several other LV BUG in this note, so pleae read carefully.
    One is the TagSrv Error that occurs in LabView 2009 if I programatically deploy Shared Variables under the WinXP Development Environment. After this problem has occured, it will occur every time I restart XP, and in essense I have to restore to before I did this (thanks Nortong Ghost !!!).
    Below you can find the full unabridged version of my Build, Run and Bug Notes for LV 2009 / 2010 DS1 (9.01). Hope they can be helpful to my fellow LabView programmers!
    2010-07-03:
    Building under LabView 2009 / 2010 DS1 Release (version 9.01)
    Follow the steps below:
    a) To successfully build an EXE that also runs
    b) Avoid that MathScript Comments are included in the EXE !!!!!!!!!!!!!!!!
    Before Building:
    I) Recompile All  by pressing Ctrl+Shift and pressing the RUN button on the Application_References.vi
       Then Save All (about 1200 Vis are saved)
    II) Make Sure that NO User Defined Mathscript (and Mathscript Nodes?) define Empty Functions:
        This seemed to cause the following problem with the built EXE: The main VI will be broken, and a dialog reports:
        "The VI is not Executable. The full development version of LabView is required to fix the errors"
        MathScitp BUG: Empty Functions causes no Build Errorm but RUN Error:
        The following User Defined MathScript .m files are candidates:
        log_write() and log_clear() whith do_log_write() and do_log_clear() commented out, these functions are empty.
        When calls to log_write() and log_clear() where removed, the problem above vanished !
    Building the EXE:
    1) Additional Exclusions:
     -"Disconnect type definitions": YES
     - "Remove unused polymorphic VI instantces": YES
     - "Remove unused members of project libraries": NO (do not know if this is important)
    2) Advanced:
     - Enable Debugging: "NO"
    3) Mathscript BUG: The Application Builder Includes ALL MathScript Comments in the EXE if you use the New Build File Layout:
       IMPORTANT !!!!!!!!!!!!!
       Advanced:
       "Use LabView 8.x file layout": YES !!!!!!!
       Using the new layout, causes ALL COMMENTS FROM USER DEFINED MATHSCRIPT .M FILES TO BE INCLUDED IN THE .EXE !!!!!!!
    4) BUG: DSC Reference Problem in LabView 2010 DS1 release:
       In VI Deploy_Shared_Variables.vi we deploy alle Shared Variables using the "Deploy Libraries.vi" which is a part of the DSC option.
       As long as only deploying of Variables is used, using this VI should NOT require any DSC Runtime license.
       We have used this before with no compilation problems.
       However, starting with LV 2009 SP1 (or was it the DS1 2010 upgrade) LV will start nagging us to resolve references to tens of VIs
       in the DSC lib file ! Solution: Used press "Stop" on the dialog, and the Build will succeed and the EXE will work !
       Optionally, we could use the following Invoke node for the deployment:
       (see: http://digital.ni.com/public.nsf/allkb/04D9A85B6967EE87862571140065EEC6). Excerpt from this description:
      <<Right-click the block diagram to bring up the programming palette and go to Programming»Application Control and place the
        Invoke Node on the block diagram. Using the hand tool, click Method and select Library»Deploy Library>>
    5) LabView BUG: Do NOT RUn the Application under the WIn XP SP2 Development Environment if the APP Deploys Shared Vars:
       This will cause the Dreaded TagSrv Error:  "TagSrv.exe: This application has requested the runtime to terminate in an unusual way".
       After this Error has occured, it will reoccur each time WinXP SP2 is restarted, and (Network) Shared Variables will NOT work any more!
    Geir Ove
    Attachments:
    LabView_Tagsrv_Error.jpg ‏26 KB

    Hello Geir,
    I have tried to reproduce the behavior you are seeing where .m file comments appear in the final built executable.  However, I am unable to do so using LabVIEW 2009 SP1.  I have a caller VI with a MathScript node that calls the adder function in adder.m.  The contents of adder.m are as follows:
    % ADDER This function adds 3 to its input variable
    %   y = adder(x)
    %   INPUT: x
    %   OUTPUT: y, equal to x + 3
    function y = adder(x)
    y = x + 3;
    I have configured the build specification as you mention in steps (1) and (2):
    Additional Exclusions
     - "Disconnect type definitions" Yes
     - "Remove unused polymorphic VI instances" Yes
     - "Remove unused members of project libraries" No
    Advanced
     - "Enable Debugging" No
    At first, I did not include the adder.m file in the project.  I built the application and was not able to find the text "adder" anywhere in the EXE.  Then, I added the .m file to the project and put it in the "Always Included" section in "Source Files."  Again, I was not able to find the search text in the built EXE.  In step 3, you mention
    geirove wrote:    
       "Use LabView 8.x file layout": YES !!!!!!!
    but in the 5th post in this thread, you state
    geirove wrote:
    Compile using the new compile method ( Use LabView 8.x file layout": NO),
    I have tried both settings in the Advanced section, but again, I am not able to find any comments in the EXE.  I even added a call to the "path" function in adder.m.  This puts a warning glyph on the caller MathScript node and generates different code.  The EXE will return an unknown symbol error for adder (any VI with a warning glyph will not work in a built app), but I am not able to find any comments in the EXE.  This project is attached below.
    As for your other item with a broken EXE if you call empty functions, I am unable to reproduce this as well.  I have taken the last attachment to your third post in this thread (the log_write function) and called it from the caller VI as well.  The EXE runs just fine and I do not find any comments in this EXE either.
    Unfortunately, there was a rather serious issue in the LabVIEW 2009 MathScript RT Module, where some internal MathScript VIs could become corrupted when building executables.  Have you tried running the "Find Bad Instantiations" tool from this Knowledge Base article?  Simply installing the SP1 version on top may not have corrected any VIs that may be corrupted.
    Due to our difficulty in reproducing the issues you mention, could you modify the attached project or else attach a new project, appropriately configured, that builds an EXE with .m comments embedded in it?  This way, we can uncover any minute details that we're overlooking.
    Grant M.
    Senior Software Engineer | LabVIEW MathScript | National Instruments
    Attachments:
    MComments.zip ‏186 KB

  • Update Symbol and Symbol Script without removing from Document library

    Is there a way in fireworks CS5.1 to update a symbol and the corresponding symbol script without removing it from the document library like it suggests in the below article
    http://www.adobe.com/designcenter/fireworks/articles/frwcs3_richsymbol_print.html

    I have done some more research on this question and there appears to be no way to update a symbol script without removing it from the document library, hopefully this bug will be patched in the near future

  • User Defined Transaction in Logical Data Service

    Hi
    I have few physical data services created from database store procedures. I've corresponding logical services for each of the physical data services.
    Now I've created a logical data service that calls 2 store procedures & trying to update this 2 store procs in a single transaction.
    Also I dont have a read operation in my logical data services. In this case both store proc. should take part in a single transaction & should commit or rollback as per success/failure.
    I tried testing this scenario & it fails. ALDSP was able to update first store proc. but there was an error in second store proc. so it should have rollback the entire transaction.
    Is there any way that we can have user defined transaction in logical data service?
    My Scenario:
    InsertData(RequestA,RequestB) as response
    res1 := call First Store Proc (RequestA) ;
    res2 := call Second Store Proc (RequestB);
    response := res1 + res2
    So my question was is it possible to define user transaction before making calls & have commit/rollback define around it.
    Apprecaite for your help!
    Thanks
    Pash

    I have assumed that you realize you need XA drivers for this. What is the exception you see? Something about "mixed outcome"?
    But in the case of store procedure, we cant drag & drop physical ds into logical ds. Why?Since your stored procedure updates, it should be defined in the physical ds as a "procedure" not a "function" - it sounds like it is. (procedure means it will update, function means it will not - not that it is a "stored procedure"). Because it updates it cannot be called by an xquery function because xquery is by definition read-only. It can only be called directly from the client, or from another procedure (which is XQSE, not Xquery). If you created a logical ds with a "procedure" - you could drop your procedure into that.
    created a new library procedure in which i am calling 2 physical ds assuming it will be executed in a single transaction. But it does not. Please verify.
    But it does not. Please verify.I won't verify it because it is not correct. It should be treated as though it is one transaction. And barring the bugs with JNDI/data source names and multi-data sources, I do not know how how it would not be. So either there is a misunderstanding or a new bug.
    Either way you need to open a case with customer support to resolve this. When you open your case, the more information you provide them with (i.e the smallest possible dataspace that will reproduce the problem along with DML to create the stored procedures and the tables that they use, and also any/all exceptions/stack traces and server logs).
    - Mike
    ps. there are no means to explicitly create a transaction in ODSI.

  • How do I SELECT multiple albums in iPhoto?

    I can select a single album:
    select album "Album A"
    But, How do I SELECT multiple (non-contiguous) albums in a list?
    Something like :
    select album's {"album1","album3","album9"} --(doesn't work)
    -TIA
    G4 powerbook   Mac OS X (10.4.6)  

    I agree, it seems to just be limited to children of Library.
    I'm going to use your 'build command' to deselect all Library items. That way, the novice computer user will get visual feedback that Library items won't be processed.
    ----------------applescript
    tell application "iPhoto"
    set _selection to selection as list
    --getting selected albums inherently omits Library albums (a bug IMHO) .
    set _albumsSelected to {}
    repeat with _album in _selection
    set end of _albumsSelected to _album's name
    end repeat
    -- Now, reselt albums to deselect Library albums.
    set commandString to "select (albums whose name is "
    set firstLoop to true
    repeat with albumName in _albumsSelected
    if firstLoop then
    set commandString to commandString & "\"" & albumName & "\""
    set firstLoop to false
    else
    set commandString to commandString & " or name is " & "\"" & albumName & "\""
    end if
    end repeat
    set commandString to commandString & ")"
    run script {commandString}
    end tell
    Thanks Bernard for your help. I just changed "contains" to "is" because in my tests I had "untitled album", "untitled album 1" etc. Then, because of the first "untitled album", all iterations were re-selected (not desirable).

Maybe you are looking for

  • Using if the else logic in regards to a select statement for a report

    Hi all, I've a question regarding if then else logic in Oracle. I'm developing a report application which contains 3 selectlists - ProductGroup - SubGroup - Manufacturer Each one containing several values. And are based on eachother, meaning if you s

  • IPhone 4 call quality

    So me and my partner upgraded our o2 contracts yesterday and got the iPhone 4. We had iPhone 3GS' before that. When talking to other people and hearing them through the ear piece, it was crystal clear. (With iPhone 3GS') People used to comment on how

  • What's the easiest way to create a new VLAN and then move all existing devices to it?

    One of our locations was implemented using VLAN1 as the main (native) VLAN. My goal is to create a new sub-interface on the router and then move all the existing switches (all Layer 2) into the new VLAN, without disrupting the network (and remotely).

  • How to transfer Outlook Notes to Mac

    Hi, I recently bought a Mac and want to convert my "Notes" from Outlook (work PC) to my Mac. I do not want to use Paralles, ideally i just want to run the info under "Mail" or any other program which works. Any idea, how i can import this? I am reall

  • Time management configuration/ ESS MSS configuration documents

    hello Xperts,   do any one have Configuration documents for time management and ESS/MSS Pls forward to me shanker366atgmail.com