Mix of strategy 11 and 70

hi all,
i want to use strategy 70 assembly planning but at the same time to use gross requirements planning which means that i want to plan on the assembly level and Dependant requirements consume PIR but without taking warehouse stocks into account
is it possible?
regards
Ahmed Sobhi

Dear ,
I have n't tried before this scenario,
please follow the step to achieve your requirement
In Sand Box
Create a requirement class  as Y11 in OMPO
maintain consumption indicator as 1 & planning Ind as 2 Gross requirement planning and category as Planned Independent Requirement
Create a Requirement type Y11 and assign the requirement class Y11 in OMP1
and create a strategy Y11 in IMG>prdn>prdn planning>DM>pir-->planning strategy --> define planning strategy
and assign the reqmt type Y11
and assign the strategy in material master and check out result
If the result suits your business reqmt configure it in DEV system

Similar Messages

  • Is there a way to "mix" the nodes and leaves of the tree so if they are at the same level, they will display in a specified order.

    Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
    History:
    We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If  TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5.  Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree,  not a "tree" table.  This is our first attempt at the tree, so maybe we're missing something basic?
    TK1
    -Mat1
    -Mat2
    -Mat3
    -Kit1
    --Comp1
    --Comp2
    --Comp3
    -Mat4
    -Kit2
    --Comp4
    --comp5
    --comp6
    -Material5
    displays as
    TK1
    -Kit1
    --Comp1
    --Comp2
    --Comp3
    -Kit2
    --Comp4
    --Comp5
    --Comp6
    -Mat1
    -Mat2
    -Mat3
    -Mat4
    -Mat5

    co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
    TK1    
    . Mat1
    . Mat2
    . mat3
    > kit1   
    .. comp1
    .. comp2
    .. comp3
    . mat4
    > kit2
    .. comp4
    .. comp5
    .. comp6
    . mat5
    displays at
    TK1
    > kit1
    .. comp1
    .. comp2
    .. comp3
    > kit2
    .. comp4
    .. comp5
    .. comp6
    . mat1
    . mat2
    . mat3
    . mat4
    . mat5
    we can make it work if everything is a folder. This is our current workaround.
    TK1
    > mat1
    > mat2
    > mat3
    v kit1 (when expanded)
    .. comp1
    .. comp2
    .. comp3
    > mat4
    > kit2 (when not expanded)
    > mat5

  • 3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.Ho can we change this so our phone information isn't visible to each other?

    3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.How can we change this so our phone information isn't visible to each other?

    Use separate Apple IDs for each family member and use Family Sharing features of those things (if any) that you do want to share. https://www.apple.com/ios/whats-new/family-sharing/

  • Cutover strategy and dates

    Hi Friends
    Please explain the cutover strategy and dates.
    How it will work sin implementation.I have pending 3 planned orders after go live. how can i move these orders to sap system after go live.
    Before go live i want 4 planned orders to move to sap system . whati s settings.
    Please explain
    Thanks
    Venkat

    Hi ,
    Could you please explain more about your production strategies Is it drive through Order or Make to stock ?
    You said you have 3 planned orders after Go-live ;
    You have all the master data gets Uploaded in the SAP system . So you can create directly Production Order in CO01 / or
    or planned order in MD11 , if the requirements are confirmed .
    Before Go-live :
    You said 4 planned orders to move , here you can also create manual Planned order Using MD11 in sap system
    If the requirements are through SO &  MTO Production strategies and the sales order drives Production after MRP run
    creates planned order automatically.
    JayaVimal

  • Put Together A Data Archiving Strategy And Execute It Before Embarking On Sap Upgrade

    A significant amount is invested by organizations in a SAP upgrade project. However few really know that data archiving before embarking on SAP upgrade yields significant benefits not only from a cost standpoint but also due to reduction in complexity during an upgrade. This article not only describes why this is a best practice  but also details what benefits accrue to organizations as a result of data archiving before SAP upgrade. Avaali is a specialist in the area of Enterprise Information Management.  Our consultants come with significant global experience implementing projects for the worlds largest corporations.
    Archiving before Upgrade
    It is recommended to undertake archiving before upgrading your SAP system in order to reduce the volume of transaction data that is migrated to the new system. This results in shorter upgrade projects and therefore less upgrade effort and costs. More importantly production downtime and the risks associated with the upgrade will be significantly reduced. Storage cost is another important consideration: database size typically increases by 5% to 10% with each new SAP software release – and by as much as 30% if a Unicode conversion is required. Archiving reduces the overall database size, so typically no additional storage costs are incurred when upgrading.
    It is also important to ensure that data in the SAP system is cleaned before your embark on an upgrade. Most organizations tend to accumulate messy and unwanted data such as old material codes, technical data and subsequent posting data. Cleaning your data beforehand smoothens the upgrade process, ensure you only have what you need in the new version and helps reduce project duration. Consider archiving or even purging if needed to achieve this. Make full use of the upgrade and enjoy a new, more powerful and leaner system with enhanced functionality that can take your business to the next level.
    Archiving also yields Long-term Cost Savings
    By implementing SAP Data Archiving before your upgrade project you will also put in place a long term Archiving Strategy and Policy that will help you generate on-going cost savings for your organization. In addition to moving data from the production SAP database to less costly storage devices, archived data is also compressed by a factor of five relative to the space it would take up in the production database. Compression dramatically reduces space consumption on the archive storage media and based on average customer experience, can reduce hardware requirements by as much as 80% or 90%. In addition, backup time, administration time and associated costs are cut in half. Storing data on less costly long-term storage media reduces total cost of ownership while providing users with full, transparent access to archived information.

    Maybe this article can help; it uses XML for structural change flexiblity: http://www.oracle.com/technetwork/oramag/2006/06-jul/o46xml-097640.html

  • Release Strategy and workflow in Purchase Requisition

    Hello All,
    My client wants to activate the release strategy and workflow at the purch req and PO levels. They allow users to create a Preq and reference that preq to the PO, or users may create a PO without referencing a Preq. Since they have the release strategy and workflow working on both levels, what they want done is, if a PO has a Preq reference, it does not need to go through another approval process on the PO level as it has already been approved on the Preq level. Therefore if a Preq is reference in a PO, the PO workflow and release strategy should not be taken into account. Can this happen as a standard config, or will this need a "user exit"?
    Thanks in advance for your help!!

    You will need to activate the user exit. This will keep the PO release strategy simple.
    Have a flag (use USRC1 or USRN1). In your PO release strategy classification, maintain only X in this characteristic.
    In the user exit, check whether the PO is created with reference to PR. If yes, pass "blank" to USRC1, else pass "X". The release will be triggered only in case of X.
    Just a couple of points:
    1) What will you do if one item in PO is created with reference to PR and the another item is not?
    2) What will you do if one item is partially referenced to PR (i.e PR quantity is 100, PO quantity is 200 - of which 100 is referenced to PR and other 100 is not - this is possible by changing in delivery schedule)?
    Hope this helps
    Lakshman

  • Mix of Arabic and English causes problems in JTextArea

    I have a JTextArea which displays HTML of an Arabic web page. So it's essentially a mix of English and Arabic. In the JTextArea, with columns set to 30, certain text just disappears instead of wrapping properly. The weird thing is that if I copy the invisible text and paste it into Notepad, then I can see it in Notepad. If I change the number of columns to 40, everything displays fine. Any ideas?

    It seems that Arabic is not the problem here. It is something to do with tabs. All the lines that disappear begin with 5 tabs. If I remove one tab so that they begin with 4 tabs, then they appear fine in the JTextArea

  • Mixed content - https and http

    Guys and Gals -
    I have a page that has mixed content - http and https. Users talk to my webserver
    using https, which talks to the portal server using http.
    The browser popups a warning saying that the site has mixed content. Is there
    any way to prevent this warning from coming up? Anything I can do using a proxy
    or something else?
    Thanks
    Niks

    Neeraj Harlalka wrote:
    It's probably not because your webserver is talking to App server on
    http connection. It could be some images being referrenced from the
    browser using non-secured protocol. Try using absolute path or code URLs
    using jsp tags.
    hope it helps
    Guys and Gals -
    I have a page that has mixed content - http and https. Users talk to my webserver
    using https, which talks to the portal server using http.
    The browser popups a warning saying that the site has mixed content. Is there
    any way to prevent this warning from coming up? Anything I can do using a proxy
    or something else?
    Thanks
    Niks

  • Outbound Delivery Processing - mix of serialized and non-serialized product

    Has anyone configured the outbound delivery processing scenario in AII to handle a mix of serialized and non-serialized products? How do you handle packing & loading transactions where you have a mix of serialized and non-serialized products in the same shipment?

    Closed..
    Thanks

  • Mixed phone numbers and names after sinc N9 and ov...

    I have problem with my contact list. After i synchonised my previous N79 with N9, everything was fine. AFter adding new contacts to the new phone i wanted to synchronise it with ovi, i did so but it made completely mess with all my contacts. I cant say if i miss any numbers but it was way worse, it has mixed up names and numbers without any sence so I realised that under name A i had a phonecontact of B and C. At some names were suddenly no phone numbers. And some of them were even doubled - like there was the same number saved under both A and B but it belonged to C. I hate it, had to rewrite all the ontact list manually along the old phone. That took me hours if anyone can imagine. Now Im not brave enough to try the sync again eventhough i need to do that... Anyone having the same problem or even better - solution?

    Try plugging your iPad into your computer and opening iTunes. Select your iPad underdevices on the left side of the screen and right click. You should be given an option torestore from a backup.
    If this option is not available to you, you can go through the Summary tab of your iPad on the right side of the screen and if you scroll down under iCloud you should get an option to restore from a previous backup, where you select the most recent backup to put on your iPad.
    Hope that helps.

  • Pattern Strategy and generics

    Hi there !
    I'm trying to implements a strategy pattern by using generics.
    That is my attempt for the abstract part :
    public interface Strategy<C extends Compound> {
            public abstract void apply(final C c);
        public abstract class Compound {
            Strategy<? super Compound> strategy;
            public void setStrategy(Strategy<? super Compound> strategy) {
                this.strategy = strategy;
            public final void move() {
                this.strategy.apply(this);
        }But when I want to use it :
        public class AStrategy implements Strategy<ACompound> {
            public void apply(ACompound compound) {
                return;
        public class ACompound extends Compound {
            public ACompound(AStrategy strategy) {
                // setStrategy(Strategy<? super Compound>) in Compound cannot be applied to (AStrategy)
                this.setStrategy(strategy); // BOOM !
        }So I think that I don't use correctly the wildcards and bounds ... What's wrong ?
    Thanks

    Sorry not to really offer an actual explanation...I'm not sure I could get one right, so I'll leave that to an actual Expert!
    But here's another way of writing that example. It's maybe more heavyweight than what you want (and maybe also you'll get more replies telling you all the reason why it's a Bad Approach!), but it will compile for you.
    interface Strategy<S extends Strategy<S,C>, C extends Compound<S,C>>   {
            public abstract void apply(final Compound<S,C> c);
    abstract class Compound<S extends Strategy<S,C>, C extends Compound<S,C>> {
            Strategy<S,C> strategy;
            public void setStrategy(Strategy<S,C> strategy) {
                this.strategy = strategy;
            public final void move() {
                this.strategy.apply(this);
        }The basic idea is that Strategy and Compound define a way for two classes to relate to each other. If you declare classes XXX and YYY (respectively) to be a Strategy/Compound relationship, then you know that all of the business relating to Compound in XXX should actually be about YYY. It's just the same thing as knowing you get a String out of an Iterator<String>, except that it goes back and forth between two different classes. So your two concrete classes become:
    class AStrategy implements Strategy<AStrategy, ACompound> {
            public void apply(Compound<AStrategy, ACompound> compound) {
                return;
    class ACompound extends Compound<AStrategy, ACompound> {
            public ACompound(AStrategy strategy) {
                this.setStrategy(strategy); // BOOM !
        }Of course, overusing this leads to amazingly long type variable lists.

  • Mixing Non JSF and JSF components

    Hi All,
    I wanted to mix non jsf and jsf components and I able to do this
      <f:verbatim>
                                    <input type="radio" name="selectBidder" value="#{currentRow['BID_ID]}"/>
                                </f:verbatim>But the problem is bean value is not getting binded.
    The rendered output is containing same string i.e.
    value="#{currentRow['BID_ID]}"
    How to bind bean value to non jsf component.
    And No Javascript please
    Thanks
    Sudhakar

    Basically I am trying to implement something like below
    <h:dataTable binding="#{consumer$Select_Provider.dataTable1}" headerClass="list-header" id="dataTable1"
                            rowClasses="list-row-even,list-row-odd" style="left: 48px; top: 48px; position: absolute"
                            value="#{consumer$Select_Provider.dataTable1Model}" var="currentRow">
                            <h:column binding="#{consumer$Select_Provider.column6}" id="column6">
                                <h:outputText binding="#{consumer$Select_Provider.outputText11}" id="outputText11" value="#{currentRow['USER_LNAME']} #{currentRow['USER_FNAME']}"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{consumer$Select_Provider.outputText12}" id="outputText12" value="Bidder"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{consumer$Select_Provider.column1}" id="column1">
                                <h:outputText binding="#{consumer$Select_Provider.outputText1}" id="outputText1" value="#{currentRow['BID_PRICE']}"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{consumer$Select_Provider.outputText2}" id="outputText2" value="Bid Price"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{consumer$Select_Provider.column3}" id="column3">
                                <f:verbatim>
                                    <input name="selectBidder" type="radio" value="#{currentRow['BID_ID]}"/>
                                </f:verbatim>
                                <f:facet name="header">
                                    <h:outputText binding="#{consumer$Select_Provider.outputText6}" id="outputText6" value="Select Bidder"/>
                                </f:facet>
                            </h:column>
                        </h:dataTable>Thanks
    Sudhakar

  • PR release strategy and Standard Workflow suddenly doesn't work

    Good day,
    I have PR release strategy and Workflow activated. My workflow is copied from standard PR release workflow in SAP. The only changes I made in the WF is Agent Assignment. It worked like a wonder.
    However this week when I was creating PR, Release Strat still works but WF doesn't kick in. No change was done to both PR release strat and WF.
    Any help/suggestion for this? Is there a period of activation in WF?
    Regards,
    Si

    Hi Diwakar,
    I was able to activate it already yesterday. What I did was to test the workflow in SWDD. After the test, all workflow items were created. Am still wondering though why WF would suddenly stop (not generate workflow items) even with no changes made.
    Thanks for the info and link. Points awarded.
    Regards,
    Si

  • ADF Faces: is mixing JSF RI and ADF Faces tags supported?

    Hi,
    I'm looking at ADF Faces as a future possibility for our application that is currently based on JSF RI.
    When looking at the ADF Faces demo it strikes me that all pages are almost completely built up from ADF Faces tags.
    For instance
    af:form
    af:commandButton
    af:inputText
    are used instead of the equivalent core jsf tags f:form, f:commandButton and f:inputText
    I'm wondering if this is mandatory if we would like to use some ADF Faces components mixed within our existing application.
    In other words: are ADF Faces tags supported in the environment of conventional JSF tags? And mixing ADF Faces JSF components with JSF components by other vendors?
    Another thing that strikes me is that pages are constructed using ADF Faces tags for any and all markup content.
    I guess this is meant to support several different clients (normal browser applications, mobile clients, voice activation over telephone) using different renderers.
    In my experience abstracting markup this way inherently means loss of control over the exact markup that is sent to the client. This is not acceptable for all projects and customers.
    Is embedding ADF Faces tags within template HTML, within f:verbatim tags or not, supported?
    Regards,
    Joost de Vries

    You absolutely can mix JSF RI and ADF Faces tags. This is very much supported! You can swap in <h:form> and <h:commandButton> and <h:inputText>. Our versions support some features that the JSF tags do not, as described in our release notes.
    Your point about using tags to produce all markup is a very cogent one. For some projects, absolute control over HTML will be a necessary requirement, so we do support that style of development. But we believe strongly that the future does not lie in constant handcoding of HTML, but instead in building more powerful, flexible, and reusable components and assembling those into pages. This was one of the themes of a talk I gave with two coworkers at this past JavaOne.
    -- Adam Winer (JSF EG member and ADF Faces lead)

  • Mixed Environment: Wintel and Unix

    We are currently looking into implementing HFM in a Mixed environment, Wintel and UNIX. The Web Servers and Application servers will run on Wintel; however, we are thinking of putting our Reports server in a UNIX environment. Are any of you running HFM in a mixed environment? We would appreciate any feedback...Thanks,Doug

    From what you post about trying different things I would delete com.apple.ichat.AIM.plist and restart iChat
    2:50 PM Sunday; November 18, 2007

Maybe you are looking for

  • Unsharp text in menu bar and other various places

    After upgrading to Yosemite the text and icons of the menu bar is pretty unsharp. Other text such as on websites and filenames remain sharp. Anyone else experiencing the same issue? Any way to solve this? I'm on a 27" late 2009 iMac.

  • How to Burn a QT movie

    I created a keynote presentation, and I exported it to QT so it can be viewed by presenters who don't have Keynote. In QT by clicking on the screen the presentation progresses -- all is fine as I want it. I now want to burn the presentation to a cd s

  • Any thoughts on why my page is jumping?

    It seems to be happening when you roll over the drop down menus in IE. http://www.connorsdrilling.com. Hoping for a cure! Kelly

  • Iphoto album to iphone

    I am trying to put a few of my albums that are in iPhoto onto my phone. I used to be able to do this easily with iTunes. It seems now with my upgrade to OSX Yosemite that this no longer works. If I just save photos to iCloud they do not stay within t

  • OCCI parameter indexing?

    Looks like OCCI host variables are using different methods in indexing for setters and getters. For example for table VARTEST (A NUMBER, B NUMBER, C NUMER); Statement *stmt =      conn->createStatement("insert into vartest (a, b, c) values (:in1, :in