MM and FI report
Hello All -
Tables involved:
Datasource : 2LIS_02_ACC(ECC 6.0)
EKBE, BSAK, BKPF.
They want to see data from BSAK and BKPF and EKBE for PO.
Can you please suggest how to do.
Thanks,
Praveen
Hi,
BSAK - EBELN
EKBE - EBELN
BKPF - You don't have EBELN
In 2LIS_02_ACC you have EKKO-EBELN. If you want to see the PO from the above tables you need to enhance the structure MC02M_0ACC based on the above tables. But you don't have EBELN in BKPF table.
For details check in SAP help site.
http://help.sap.com/saphelp_nw70/helpdata/en/5c/8ea0e626e442efb109232830faded9/frameset.htm
Thanks
Reddy
Edited by: Surendra Reddy on Feb 12, 2009 5:29 AM
Similar Messages
-
Hello All,
I am running 6i and 10g reports against a 10g database.
I ran one of the 6i report and it generated a report in one sorting ordear
and when i ran the same report on 10g ,it generated the report in ddifferent order.
Both the reports r run against the same 10g database.
The order by clause on the columns of the records r identical.
Now i wanted to understand how it is sorting in different orders in both 6i and 10g reports?
Thanks,
RanzHi,
Please note the fact that 6i Reports is not certified to work with 10g Database. Hence it becomes impossible to address the sorting behavior of 6i Reports, though there is nothing different in the way it works. I would suggest you to use 10gR2 version of Reports services with 10g Database which is certified and supported. Thanks for your understanding.
Regards,
Anand -
Crystal report(Can i link sub report and main report Compulsorily) - invalid path
hi.
i need small clarification.
i am developing one Crystal report
main report i took it from rdr1 one table...
report is working fine..
Sub report i took it from inv1 one table.
i have not linked any fields from these tables.
May be it is having links in b1..
but in my other report both the tables.... from main report and sub report does not have any relation.
My Questions is..
Can i Compulsorily link fields to main report...
if both does not have any relation what should i do...
i took two tables.
main report rdr1
sub report inv1...
if i run the report it is asking two parameters one is for sub report and other one for main report working find in crystal report.
but...i want to run the report in b1.
while importing i am getting the error (Plz have a look on below image)
if i choose any other report it is importing fine...
Clearly i am mentioning i dont want to link both tables there is no links between two reports...
in this scenario can develop a report..
I need your Valuable suggestions.
here below u can find my developed sample report...
http://www.megafileupload.com/en/file/544758/NewReport-rpt.htmlhi.
If i try only i am getting the error..
out side if i run i am able to run the crystal report but
in b1 i am not able to import the report.
you can also try my report
from below link u can get my simple report.
if u find any mistake what i have done plz inform me..
http://megafileupload.com/en/file/544806/NewReport85-rpt.html -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Error while running historical and operational reports in OIM 9.1
Hi all,
I had a look at the operational reports and historical reports in OIM 9.1
When I tried to run the reports by supplying the parameters, I see the following behaviors.
a)The reports run as expected and display the information.
b)The moment, I click submit I see a series of exceptions in the Jboss log, the beginning of the thread being....
WARN [TxConnectionManager] Connection error occured: org.jboss.resource.connectionmanager.TxConnectionManager$TxConnectionEventListener@1e7aa15[state=NORMAL mc=org.jboss.resource.adapter.jdbc.xa.XAManagedConnection@6fc757 handles=1 lastUse=1300177838234 permit=true trackByTx=true mcp=org.jboss.resource.connectionmanager.JBossManagedConnectionPool$OnePool@62b4a1 context=org.jboss.resource.connectionmanager.InternalManagedConnectionPool@40ba54 xaResource=org.jboss.resource.adapter.jdbc.xa.XAManagedConnection@6fc757 txSync=null]
java.sql.SQLException: No more data to read from socket
c)The screen just hangs without any error message/report results. When I tried to click any other menu items on the left hand side, none of them responds after the screen is hung.
The only option available is to close the window and reopen the browser again.
It would be great if you could let me know the root cause for scenarios 'b' and 'c'
Looking forward to hearing from you,
Many thanks in advanceHey guys! 2 days and no replies yet. please help me with this.
-
Current State:
• I have a customer running CUCM 6.1 and UCCX 7.01SR5. Currently their CUCM is *NOT* LDAP integrated and using local accounts only. UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
• The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
Goal:
• Upgrade software versions and migrate to new hardware for UCCX
• LDAP integrate the CUCM users
Desired Future State and Proposed Upgrade Method
Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server.
Then during a weekend maintenance window……
• Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
• Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
• Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
• Restore the data from the UCCX PUT tool
• Continue setup per documentation
At this point does UCCX see these agents as the same as they were before?
Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
We can simplify this question along these lines
Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01. Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software.
If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens?
I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
What would historical reporting show in this case? A set of old agents and a set of new agents treated differently?
Has anyone run into this before?
Is my goal possible while keeping the agent configuration and HR data as it was before?I was doing some more research looking at the DB schema for UCCX 8.
Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
Database table name: Resource
The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive. -
VS2008/VS2005 and Crystal Reports 2008 Developer
Hi,
1.) I am using VS2008 and Crystal Reports 2008 Developer. Are there any issues I need to consider when developing using both of the above? (or with VS2005)
2.) The confusion for me is in regards to the SDK. From what I understand from articles etc is that using CR 2008 dev we can use the .NET SDK or RAS SDK for development purposes?
3.) So downloaded the sample code for RAS .NET from [here|https://www.sdn.sap.com/irj/boc/businessobjects-samples?rid=/webcontent/uuid/80774579-b086-2b10-db91-ed58c4dda375] and tried "DatabaseLogon_CS" example, as the option. It automatically opened in VS2005 (no problem) however it would not run.
I would get an error :
Failed to connect to server "localhost".
Error returned from Windows Sockets API : 0.
and line causing this is >>> rcd.Open(ref path, 0);
Code below:
string sampleReportPath = @"C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Samples\en\Reports\Demonstration\World Sales Report.rpt";
object path = (object)sampleReportPath;
// Create an instance of the ReportClientDocument.
ReportClientDocument rcd = new ReportClientDocumentClass();
// Set the location of the RAS server.
rcd.ReportAppServer = "localhost";
// Use the Open() method of the ReportClientDocument to open the report.
rcd.Open(ref path, 0);
I have been able to open the RPT file by itself. So it does 'see' the database.
Reason why it would not run?
Any help would be appreciated. ThanksIf you're using the sample code from our website, make sure you have uncommented the InprocRAS option in the ConfigureCrystalReports method (see below). From your error description it seems like you're using the unmanaged RAS option, which requires a RAS server.
private void ConfigureCrystalReports()
/* The following methods implement the same sample functionality in three different RAS
* scenarios. Uncomment the method you would like to use.
* - inprocRAS() logs onto a databse using RAS and SQL authentication.
* - managedRAS() logs onto a database using RAS and SQL authentication from a managed RAS server.
* - unmanagedRAS () logs onto a database using RAS and SQL authentication from an unmanaged RAS server.
* Undocument the call to the method which applies to your appropriate RAS settings.
DatabaseLogon_inprocRAS();
//DatabaseLogon_managedRAS();
//DatabaseLogon_unmanagedRAS(); -
What is difference between interactive list and interactive reports?
what is difference between interactive list and interactive reports?
hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat -
Diff b/w snapshot baselines and AWR reports
Hi All,
Can anyone tell what is the difference b/w snapshot baselines and AWR reports. I have gone through couple of articles and i feel both are same, however given different names.
Am I correct?
ThanksAWR report is a report comparing the pair of snapshots and thus giving you the details of what has happened between that inerval!
The baselines is that "interesting time period" which you define telling to oracle and is used by oracle to compute the sql response tiime of your db with it in the subsequent timings. So both are completely different actually!
HTH
Aman.... -
BI Publisher 11g 11.1.1.6.0 and OIM Reports Not Showing Up
After upgrading to OIM BP04, I following the readme to install BI Publishing, but used the 11.1.1.6.0 version.
After creating: C:\Oracle\Middleware\Oracle_BIP\user_projects\domains\bifoundation_domain\config\bipublisher\repository\Reports\Oracle Identity Manager
I copied C:\Oracle\Middleware\Oracle_BIP\user_projects\domains\bifoundation_domain\config\bipublisher\repository\Reports\Oracle Identity Manager\OIM_11gR1_BIP11gReports.zip and uncompressed it here..
Then I restarted everything except for the database.
When I logon to the BIP console, go to Catalog then Shared Folders, there is no 'Oracle Identity Manager' folder...only the original Components and Sample folders.
What's up with that?The answer is to open up the weblogic security schema for BIP and add a user account with the same name used to access OIM, then add the BI_Authors role. Save. Restart BIP. This got me the Resource Reports.
The DB Roles and Privs reports still don't work OOTB because the jobs don't update the UD_DB_ORA_P and _R tables. Still working on how to get that down. What's that...you know how...please do tell. Thanks :) -
Error on Visual Basic 6.0 and Crystal Reports 9.2 on XP SO
We need support to resolve an error on a system made with Visual Basic 6.x and Crystal Reports 9.2.
Error '-2147417848 (80010108)'
Automation Error
Not always give these errors.
Often occurs after request two reports followed and SO is XP
When SO is Windows 2000 professional this error not occurs.
These are versions of the products used:
Versión Visual Basic: 6.0.9782
Versión Cristal Reports: 9.2.0.448Hello,
This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
Try downloading the only patches available from:
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
Thank you
Don -
Shortened Fiscal Year and its impact on BI back end and Bex reports
Hi All,
Our client is making some changes to the fiscal year period.
Becuase of some business requirements, we will have to shortened the fiscal year.
Can you please suggest - what are the watch points when we do this?
- what will be the impact to BI back end and Bex reports?
Thanks,
NishaHello Nisha,
Since the fiscal year (Infobjects - 0FISCYEAR and/ 0FISCPER3) is compounded with fiscal year variant, therefore maintaining the correct variant in BI will automatically take care of showing the data correctly.
So there are two things to be maintained in BI:
1) To see that the variant definition.
2) If you need to display the text of the fiscal periods, then the correct texts.
Let me know if you need more clarifications.
Regards,
Shweta
Edited by: Shweta Kesarwani on Jan 8, 2010 11:10 AM -
Currently, my SharePoint 2013 Farm has Workflows 2013 and SQL Report Services installed on app servers, along with other applications. Workflows 2013 isn't working correctly (installed prior to my coming on board with the organization), I'm assuming it
is a configuration issue, but rather than re-configure, I've read that is recommended to be a standalone server. It was also recommended by a MSFT rep that our report services have its own independent server. Currently, Report Services is also installed on
an app server that runs other applications on the farm.
Has anyone had any experience with installing Workflows 2013 and/or SQL Report Services on independent vs. existing application servers?
Additionally, my existing application servers have 24 GB of RAM (I believe the recommendation for SharePoint production environments is 12 GB), should I plan for the potentially new servers (Workflows and Report Services) to also have 24 GB of RAM? Not really
sure if it will be needed if they have dedicated tasks.
Thanks for any input you can provide!It entirely depends on load. WFM will work just fine installed on servers in the SharePoint farm. SSRS preferably should go on the end-user facing servers for better performance.
The questions you're asking are all "it depends" :)
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Standard and customized reports
Experts,
I'm given a requirement to create some reports. Was hoping someone can help me with which are standard and customized reports from this list :
OPEN PURCHASE ORDER REPORT
OPEN REQUISITION REPORT
OPEN RFQ REPORT
PURCHASE ORDER CONFIRMATION REPORT
STOCK ITEMS RE-ORDER
STOCK ITEMS RESERVED
STOCK ITEMS ABOVE STOCK MAX
STOCK ITEMS BELOW STOCK MIN
STOCK ITEMS DETAILS
STOCK ITEMS INVENTORY CONTROL
STOCK ITEMS LIST BY NUMBER
STOCK ITEMS MOST USED
STOCK ITEMS NOT USED
STOCK ITEMS ORDER BY COST
STOCK ITEMS ORDER BY LOCATION
STOCK ITEMS ORDER BY VENDOR
STOCK ITEMS OVER RESERVED
STOCK ITEMS STATUS
STOCK ITEMS VALUE
VENDOR PERFORMANCE REPORT
Regards,Hi,
SAP Std. Reports Description Z-Dev
ME2N / ME2M / ME2L OPEN PURCHASE ORDER REPORT
ME5A OPEN REQUISITION REPORT
ME4N / ME4M / ME4L OPEN RFQ REPORT
ME2A / VL06I PURCHASE ORDER CONFIRMATION REPORT
MB53 STOCK ITEMS RE-ORDER ABAP Report
MB24 / MB25 STOCK ITEMS RESERVED
STOCK ITEMS ABOVE STOCK MAX ABAP Report
STOCK ITEMS BELOW STOCK MIN ABAP Report
MMBE / MB52 STOCK ITEMS DETAILS
MC.1 / MC.9 STOCK ITEMS INVENTORY CONTROL
MMBE / MB52 STOCK ITEMS LIST BY NUMBER
MC46 STOCK ITEMS MOST USED
MC50 STOCK ITEMS NOT USED
ME2N / ME2M / ME2L STOCK ITEMS ORDER BY COST
ME2N / ME2M / ME2L STOCK ITEMS ORDER BY LOCATION
ME2L STOCK ITEMS ORDER BY VENDOR
MB24/MB25 STOCK ITEMS OVER RESERVED ABAP Report
MMBE/MB53 STOCK ITEMS STATUS
MB52 STOCK ITEMS VALUE
ME6H VENDOR PERFORMANCE REPORT -
I get no audio for the Daily Show and Colbert Report
I am using the most recent Adobe Flash Player 11.4.402.265 with Windows 7, 64-bit, which works for all videos except those for The Daily Show and the Colbert Report, which have no audio.
The Daily Show and Colbert Report play in Google Chrome, but not in Firefox.Sometimes it's jest THEM! But be sure to check PLUGINS. The Shockwave and Java applications may need 'PLUGIN UPDATE' for newer versions. Suggest a check for any outdated PLUGIN UPDATE found from the Mozilla Firefox Toolbar 'Help' Menu > 'Firefox Help' > [lower right margin displays link to more info to review and 'UPDATE PLUGIN's!
-
Daily, Monthly, and Yearly Report
Hi I am new to the BAM. I have a BPM process. I want to generate the daily, monthly and yearly report for it. Please advise how can I achieve it. I have a one dimension variable on the process.
Thanks in advance!Hi,
Try this query to get default ware house and its quantity and modify above query.
SELECT T0.[ItemCode], T0.[WhsCode], T0.[OnHand] FROM OITW T0 INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode WHERE T0.[WhsCode] = T1.[DfltWH] and T1.[ItemCode] = [%0]
Thanks & Regards,
Nagarajan
Maybe you are looking for
-
Asynchronous RFC call from R/3
I need to make an asynchronous RFC call from R/3. I receive an error message in R/3 stating that my RFC destination can only be of type I (Internal) or type 3 (R/3 system). In order for it to reach XI I need it to be of type T (TCP/IP). Any help woul
-
Sparc MO on Solaris 8 for intel
Is there any way possible to mount and read (readonly is fine) a scsi magneto optical drive that was written on a Sparc 5 for Solaris 8 loaded onto an intel *86 machine. i know there are issues with big and little endian and that there are ways to co
-
How to upgrade Robohelp X5 to Robohelp 7 (or some later version)?
(Searched the forum but didn't find an answer. I apologize if it has been covered already.) We've been using Robohelp X5 and are now considering an upgrade due to the incompatibility with current versions of MS Word. On Adobe's product page there see
-
Best Practices for Logging Interactions in WLST
I am wondering what is the best method to log commands implemented during execution of a WLST in interactive mode and offline mode? Is it best just to import Python's logging module, or is there a better facility provided by WLST?
-
Unable to view scanned PDF files
I registered for Adobe ExportPDF in February. Since then Adobe on my PC was upgraded, and now I am unable to view scanned PDF files. What can be done about this? Thanks Rika