MM Inbound Delivery and tcodes.

Hi gurus,
I am a abaper working in MM Module and came across this post  from bijay kumar:
The Inbound process comprises all the steps of an external procurement process that occur when the goods are received. The process is: Purchase order --> Goods Receipt, it is a follow-on activity to a purchase order. You can use VL31N transaction to create Inbound delivery & the process starts when the goods are staged at the vendoru2019s shipping point, and it ends when the ship-to party makes an acquisition posting for the goods. The goods receipt process for inbound deliveries is an essential part of the supply chain. This process includes the steps after creation of the purchase order: notification, the inbound delivery, subsequent putaway of goods, and the goods receipt posting of the ordered goods.
Can some explain to me help me with a pointer to some docs which explain P.O >> Inbound Delivery >> shipment notification/ create shipment >> goods receipt.. in detail.
Best Regards,
Navin Fernandes.

Hi Gurus,
Neone can help me on this..!
Best Regards,
Navin Fernandes.

Similar Messages

  • Entry routine for Advanced shipping note -inbound delivery for tcode VL32N

    Hi ABAPers,
    What is the entry routine for driver program when I attach the driver program to tcode VL32n
    through NACE configuration.??
    Regards,
    Dep
    Solution :
    FORM entry USING return_code us_screen.
    ENDFORM.
    Edited by: DeepakNandikanti on May 12, 2010 7:23 AM

    Hi,
       The messages you mentioned were introduced to avoid inconsistency between inbound delivery and IM, through the note:  1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
       If the messages are issued incorrectly, then you may check for SAP notes (I couldnt find anything relevant) or raise an OSS ticket to SAP.
    Regards,
    AKPT

  • Difference between inbound delivery and Goods Receipt

    Can any one explain difference between inbound delivery and goods Receipt??

    Hi dear,
    Inbound delivery is one confirmation used to indicate the expected goods receipts in advance, so that the related process partners like warehouse personnel , planning personnel can utilise this data for initiation of actions and planning. Also , we can make this confirmation relevant to Planning in the customisation, to enhance the performance.
    In general , we need confirmations only as a kind of assurance/information , in absence of the goods.
    But if the goods are received physically , obviously we do not need any confirmations , we would perform the goods receipt .
    When working with Inbound delivery , the goods receipt is done with respect to specific inbound delivery( though not compulsary to do so) , so that the integration done in the system works to the advantage of the users.

  • What is the table for  inbound delivery and PO

    Hello,
    I did one inbound delivery with reference to PO, the SD Documnet Category:7(Shipping Notification/Delivery)
    I tried in LIKP,EKBE tables for Inbound delivery and PO relation.
    I didnot find, Can i have the table name for findinh the PO and Inbound delivery in one table.
    I want to fetch these two documents in to reports.
    With regards
    Lakki

    I am sorry. I misunderstood your requirement. Please ignore my earlier post on this.
    But do consider the below option :
    You can get both Purchase Order as well as Inbound Delivery details in LIPS.
    LIPS-VGBEL = Reference Document ( In this case it would be PO )
    Hope this time it helps you.

  • Link between Inbound Delivery and Sales Order for Third Party

    Greetings Gurus,
    My client is using a third party business model in a retail setting that fulfills sales order via purchase req --> PO --> Inbound delivery with GR posting --> customer billing document created through batch based on the delviery quantity ('G' in item billing relavence) --> vendor invoice reciept happens subsquently.
    My question is this, is there an inexpensive (performance wise) way to link the customer billing and the inbound delivery?
    Since the inbound is not in the doc flow i don't think VBFA will suffice. I think the best route would be via schedule line back up, but i have yet to find a link.
    There are process implications for this link for reporting and customer service which are a critical to the business. Point will be rewarded for sound advice.
    Thanks for your help.

    Hi Daneil,
    Through the document flow VBFA you can capture the PO number and the link for what you have asked can be found from table EKBE. check out for field BELNR.
    regards
    prasad

  • Upload HU to Inbound delivery and Pack these HU'S...

    Hello all,
    I have say 10 HU's in an excel upload file.
    Now ;
    1) I have to upload these HU's into Inbound delivery(VL32N) and
    2) Pack these HU's with the material in the Delivery.
    Please suggest any Function module which can perform hese steps. Also If possible please provide any example.
    Thanks,
    Subba

    Hi
    Could you please let me know how you did this as I am in exatcly the same situation ..
    I have tried several FM's but still no success....
    Thanks in advance...
    SB

  • Link between Inbound delivery and Billing

    Hi Experts,
    I am new to MM.
    It appears to me that inbound delivery is linked to Billing or the other way round.
    Can I know how are the 2 processes related?
    Can i say a billing doc can require the inbound delivery doc as the reference document at point of creating the billing doc?
    If so, inbound is about receiving goods delivered as a result of purchase order sent out to vendor.
    So, when creating a billing doc, does it mean the company is billing someone when he is the one who has purchased something?
    So, you can see that i am confused.
    Please advise. Thank you.
    regards
    Pascal

    Hi,
    Need not to confuse about inbound delivery, it is just a shipping document only.
    It is normaly used when you do STO process. because without a delivery challan you can't shift any things from one place to another place. So this Inbound delivery doc is accepted as delivery challan by the government.
    In STO process, receiving plant will raise the billing document because both plants are within a client only and receiving plant will add shipping cost, loading & unloading cost, etc on the net price of the product to sell to customer. that's why, here receiving plant creating the billing doc.
    But if you are consider that the Inbound delivery is created by a vendor with reference to your PO then the billing document will be created by the supplier (Vendor) only.

  • Cancellation of Invoice, Material doc, Inbound delivery and TO

    Hi
    I have run the following business ME21N->VL31N->LT03(TO)->LT12(TO confirmation)->Material doc is created->MIRO.
    Now i want to reverse the whole process. I have cancelled the Invoice then cancelled the Material document (MIGO), after the material document is cancelled a TR(LB11) is created, then i have created a TO from the TR created(LT04) ->TO confirmation. After this the quants are reversed from the bin to the GR area external reciepts.(nullifying with the first TO)
    My question here is how to post the stock again i.e. from where should i start ? When i am trying to create TO wrt VL32n its not happening because the status showing as completed and is it possible to cancel the inbound delivery created, If yes how to do that.
    The reason for this scenario is that the customer for some reason entered incorrect values and want to cancel the documents created.Everything should be cancelled except PO

    Scenario 1
    While creating the customer master my client forget to give the account assignment group in the billing tab of the sales area data. Because of this it did not hit the proper G/L Account. Automatically it went to some other accounts.
    My question is weather we want to cancel only the invoice or we want to reverse the delivery
    If your GL accounts will be determined based on the customer account assignment group and material account assginment group combination then you can enter manually in Billing document (if accounting document is not created), No need to reverse the invoice and delivery.
    Second Scenario 2
    My client taken the invoice without calculating the TAX and the same also released to accounts.
    Now he wants to Add the TAX
    You can cancel the previous invoice and create new invoice with taxes.

  • What is the Different between the vendor batch in inbound delivery and MIGO

    Dear Guru,
    My vendor batch number did not copied to goods receipt when i use migo to post GR reference with Inbound delivery.
    Can anyone advice if there is any different to the vendor batch in GR and IB?
    Thank you very much,
    Regards,
    Chee Wee

    Dear Amey,
    Thanks.
    Actually we have an interface with our supplier system, where they post the Goods issue in their system, then we will receive an inbound delivery idoc "DESADV" from the supplier.
    and my vendor can provide their batch number to us only when their goods issue is posted.
    In this case, we would like the inbound delivery idoc to include this vendor batch number, so when we perform the goods receipt reference with Inbound delivery will have the vendor batch number automatically.
    Regards
    Chee wee

  • Inbound delivery and shipping notification

    Hi,
    what is the difference between shipping notification and inbound delivery in confirmations tab of POs?
    Regards

    Hello SAP Friend,,,
    IT is nothing but the ASN from Vendor maintained in PO ,
    Inbound delivery is done by using VL31n Transaction after receving an update from Vendor about the shipping details of material,Quantity,date etc.
    You can specify the deadline for receipt of confirmations for each confirmation category in Customizing for Purchasing (Confirmations, Set up confirmation control under Confirmation sequence.)
    You can specify in Customizing that you wish to see the following in the monitoring list, for example:
    - Which order acknowledgments have still not been received a certain number of days after the PO date
    - Which shipping notifications have still not been received a certain number of days before the delivery date
    Arshad
    Edited by: arshad ahmed on Apr 28, 2009 12:09 PM

  • Inbound delivery and BAPI_GOODSMVT_CREATE

    Hi experts,
    If I know PO#, I can call  BAPI_GOODSMVT_CREATE to post GR.
    Now I know inbound delivery only, how to call  BAPI_GOODSMVT_CREATE?
    Thanks in advance!

    Hello Vinod
    I have the same kind of requirement, for me i am having PO number and i need to get the inbound delivery number from SAP for that PO and substitute the PO number with that inbound delivery document number and create a IDOC. i have copied the FM into 'ZIDOC_INPUT_MBGMCR'  and wrote a code to get the inbound delivery document number and done the mapping to the item segment PO field also. IDOC is geting created but that PO number only is displaying in the IDOC, so please suggest me how to change the PO field value in the idoc segments and create a idoc.
    Regards
    Sree

  • SAP System inconsistency for Inbound delivery / MIGO and a "sap note"

    Hello Friends ,
    After following SAP instruction on how to remove the inconsistency between posting GR through MIGO (Inv. mang.) and the reflection of the goods movement status in the inbound delivery document - done that using sap note 570991
    the problem is that the system start behaving in a weird way throwing unjustified Error messages for any suggested goods receipt using MIGO with reference to inbound
    for example after creating an inbound delivery document and trying to post it via migo , an error will pop up
    - Inbound delivery storage location cannot be changed to here Message no. VLA316
    the thing is i didn't even maintain any storage location entry up to that point and yet i cannot post any stock !!
    also another error  like
    - Inbound delivery batch cannot be changed to *** here
    which doesn't make any sense because there is not batches in the inbound document !!
    i think this behavior is coming from the "Document Flow Update for Stock Postings" inbound  indicator  at the shipping parameter at client level customization
    i need help on  how to overcome this annoying SAP Bug/Problem specially i am in a post go live critical situation

    Hi,
       The messages you mentioned were introduced to avoid inconsistency between inbound delivery and IM, through the note:  1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
       If the messages are issued incorrectly, then you may check for SAP notes (I couldnt find anything relevant) or raise an OSS ticket to SAP.
    Regards,
    AKPT

  • Need help in updating Inco terms 1 and 2 in the Inbound delivery creation

    Hi Group,
    I have created an output type that will be triggered before an Inbound Delivery is created from the Outbound Delivery ( this scenario is in STO orders - Inter company stock transfer process ).
    I have copied a standard processing routine and customized it but, I am not able to update the 2 fileds (INCO1 and INCO2) in the item delivery of the Inbound Delivery. I was using the FM 'WS_DELIVERY_UPDATE' to update these 2 fields( by passsing the values fetched from the Outbound Delivery into the structure 'vbkok_wa' and the Inbound delivery created into the field 'delivery' of the FM ).
    When I run the the FM this is giving me errors and thus no Inbound Delivery is getting created.
    Please suggest me with some other way of updating these fields in the Inbound Delivery.
    and one more thing is that, I was selecting the Inco terms from the table LIKP directly, but this should not be the proper way to read the Incoterms, so please suggest me a way to read these 2 fields from the Outbound Delivery.
    to summarize, I need an FM to get the Incoterms from Outbound Delivery initially, and then, require another FM to update these Incoterms in the Inbound Delivery( this is a typical scenario in an STO - Stock Transport Order ).
    Please let me know your input on these 2 cases.
    Thanks for the help in advance.
    Regards
    Vishnu.

    Hi Group,
    By implementing the BADI 'LE_SHP_DELIVERY_PROC' this particular requirement can be fulfilled.
    Regards
    Vishnu.

  • Inbound Delivery (WM) with Serial Numbers and HU's

    Hey,
    I want to use Serial Numbers with Handling Unit Management in WM.
    I want to use MIGO to GR a Purchase Order and then Auto Pack the Inbound Delivery.
    I also want to be able to Auto Pack the HU's with the Serial Numbers that i enter into the WM tab of the MIGO transaction.
    I post the GR of my PO and get my inbound delivery.  The delivery is Packed onto an HU ... BUT the serial numbers i enter are not present in the HU ?!?
    Does anyone know if this is possible via MIGO? or is this available only when receiving IM deliveries??
    thanks,
    Adam.

    Hi Nagesh,
    The process will be to use transaction MIGO for all goods receipts, therefore i would like to automate the Inbound Delivery Create AND pack process so that we minimise the amount of user input.
    Once we have entered the GR for the PO i want to automatically do the following:
    1) Create the inbound delivery (which the system does because the item is going into an HU managed storage location).
    2) Pack the inbound delivery (which the system does because i set the Delivery Type to 'Auto Pack')
    3) Assign entered Serial Numbers to the HU - which at the moment is not happening.
    I thought that by entering the Serial Numbers in the 'Serial Numbers' tab in transaction MIGO that these would be copied into the HU but this is not happening ?!?
    (NB: I have serialisation procedure MMSL: Maintain goods receipt and issue doc. - set on my serial number profile).
    We do not want to go into the Inbound Delivery and manually assign the serial numbers as this adds complexity and is time consuming for the User.
    thanks,
    A

  • Capturing and posting excise referencing Inbound Delivery

    We have the next scenario for capturing and posting excise referencing Inbound Delivery:
    1º) We create an import purchase order with excise and customs conditions
    2º) We create the customs invoice in MIRO
    3º) We create an inbound delivery and post GR
    4º) We update the "RG 23A Part 1" with J1I5 transaction.
    5º) We capture the excise invoice in J1IEX with reference to Goods
    receipt.
    When capturing the excise invoice none amount (duty value) is obtained
    and if you try to set any value the system clears them to zero when
    pressing "enter". Also, the exc. base amount is obtained wrong.
    We have tested another option:
    1º) We create an import purchase order with excise and customs conditions
    2º) We create the customs invoice in MIRO
    3aº) We create an inbound delivery.
    3bº) We capture the excise invoice in J1IEX with reference to inbound delivery. In this case all the duty values are obtained ok.
    3cº) We post the inbound delivery in VL32N.
    4º) We update the "RG 23A Part 1" with J1I5 transaction.
    5º) We try to post the excise invoice in J1IEX but the message "No Part I exists for availing credit in excise invoice 0100000184 2009" is shown. It's seems like the link between excise invoice and gr document is missed.
    Both scenarios failed. can you provided any solutions to any of them?

    Managed to get a respond from SAP, and they have answered my query. Issue is solved.
    Here is the solution:
    1. Me21N
    2. Vl31N/Vl32N with PGR.
    3. J1I5 update part 1 for the GR document.
    4. Capture/post EI with reference to the Gr document.

Maybe you are looking for