MM-Report to see the materials which is not used from last 3 months
Dear All,
I want to find out the materials which are not used from last 3 months.Is there any report?
Thanks
Vishal
Hi
check MB5B
give material and plant there
select valuates stock radio button and NON-Hierarchical representation layout on selection screen
give last three month duration period on selection screen and execute report
and see total Goods receipt and total goods issue for material
Regards
kailas ugale
Similar Messages
-
Report to see the materials division wise
how can we see the list of materials division wise
Dear DV,
Please go to SE16 transaction enter MARA table then execute here you go to menu Settings>Format List>Choose fields here you deselct all fields then you select MATNR and SPART(Division)then execute now system will give the output Material and Division of that materail.
I hope it will help you,
Regards,
Murali. -
How to see the Orders which were not settled
Hi,
I need to see the Production Orders which were not settled till now. Please provide me the transaction code for this...
Thanks
KB
Moderator: Please, search SDN; you can use any standard report for orders to see the balancesHi,
The purpose of In-Place hold is to use the Recoverable Items folder to preserve items.
When user deletes items from Deleted Items folder, these items will go to Deletions which is a subfolder of Recoverable Items folder. After items exceed the deleted item retention period, they are moved to Purges subfolder and they will be retained until
you remove hold.
Here is an article which can help you to understand In-Place Hold for your reference.
http://technet.microsoft.com/en-us/library/ff637980(v=exchg.150).aspx
Best regards,
Belinda Ma
TechNet Community Support -
I want to store my ibook. Can I take out the battery and simply not use it for months?
Just bought a new imac and want to mothball the laptop. Can I simply remove the battery and not use it?
Do I have to recharge the battery every few months?
Can't see the point in leaving it plugged in as its not being used, yet in case I need it as a back up would like to keep it.
Any comments on proper procedure?
thanks.From Apple:
Storing Your MacBook Pro
If you are going to store your MacBook Pro for an extended period of time, keep it in a cool location (ideally, 22° C or about 71° F) and do one of the following to preserve your MacBook Pro battery life:
Discharge the battery 50 percent before storing your MacBook Pro.
When storing your computer for longer than five months, discharge the battery to approximately 50 percent and then remove it from the MacBook Pro. If you are storing your computer for an extended period, recharge your battery to 50 percent every six months or so. -
How to find aggregates which are not used.
Hi ,
There are lot of aggregates in my system , so i should deactivate the aggregates which are not used from long back. so how to find out all those , can u plz guide me ,You can also check the usage column of the aggregates. If usage value is high then the aggregate is used very frequently.
If there is no value at the last used then the aggreagete is not used at all.
Hope it helps
Regards
Sadeesh -
[solved] To display Processes which are not running from constant process
i have constant processes prostat1,prostat2,prostat3,prosta4,prostat6,prostat8,prostat9 (6 processes) runs to support the application
Now my problem is
i want to display the process which is not running (from the above 6 processes)
Thanks in advanceTry this
echo "Constant processes not running"
echo
for PROC in prostat1 prostat2 prostat3 prostat4 prostat6 prostat8 prostat9
do
if [ ! "`ps -ef | grep $PROC | grep -v grep`" ]; then
echo $PROC
fi
doneBTW, those are 7....:-) -
Is there any report to see the Latest GR receipts materials wise
Dear Experts,
is there any report to see the Latest GR receipts materials wise , thanks in advance
regards
rajakarthiktransaction MC.A
Execute it.
if you see the result, then press F6 to add the date fields to the screen. -
Report for materials which have not been cycle counted.
Hi,
Is there any report which can show me materials which have not been cycle counted and also materials which have been cycle counted with the cc date?
Sincerely,
NickyHi,
As of my knowledge, there is no standard report which can fulfill your requirement. You may go for development. Please check the similar thread: Cycle count analysis report
Regards,
AKPT -
Is there any report to see the consumption details?
Hi,
Is there any report to see the consumption details? with material number or without material number?
Regards,
SattujThere are a no of ways from where you can get your desrired data....
Table mver---used for material consumption.
T code mcre---again used in consumption reports,
Table MVER gives you detail of Material Consumption
Also, MSEG (MENGE) and S026 (ENMNG) ... Pls restrict the selection condition for material with movement type 261 in table MSEG
Tables
DBERCHV Consumption History
DVER Material Consumption for MRP Area
You can get all the consumption details in MB51 report by selecting relevnt movement types. And MB5S also.
For Repetetive :-
Check this T Code MCRP,which gives you the exact material consumption datewise or order wise.
*Report MCRE is widely used for the material cosnumption than checking in COOIS.*
Also these reports can help you.
MCPF Material analysis: Dates
MCPO Material analysis: Quantities
MCPW Material analysis: Lead time -
Report to know the Materials not yet costed
Hi Experts,
Can anyone suggest a standard Report to know the Materials not yet costed in ECC.5
Thanks and RegardsDear Pradeep,
There are 2 ways of addresing this issue,
1.Either create a new material status in T Code OMS4 which throws an error message related to production order,purchase order
creation and assign it to the materials(products) which does not have any released cost estimate.
Once after taking the cost estimate you can remove this setting from the material master.
2.The other way is using user exitrs which checks whether the material has a released cost estimate or not.
Check and revert back.
Regards
Mangalraj.S -
I want the t code to see the against which service order payment was done ?
i want the t code to see the against which service order payment was done ?
you can use ME2S, but if not what you are looking for then ask ABAP to develop a customized report for service orders only for whom payment is done.
regards,
qsm sap -
I need the Log Report for the Data which i am uploading from SAP R/3.
Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nileshHi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob -
Report to see the output of VLPOD transaction
Hi Gurus
I have configured Proof of delivery concept to caputre loss of Quantity due to moisture. can any body tell me about standard report to see the output of VLPOD transaction.Full points for the correct solution.Hi,
Try the t-code VLPODL, hope can help you!
Good day
Tao -
Report: to see the Invoices with Printing Errors
Hi.
Please help us in getting the report: to see the Invoices with Printing Errors
The problem is that, at first there has been a problem and the invoice was not printed but we did not notice that it was not printed.
There has to be a report, where we can see the invoices with printing errors.
Thanks,
AmarHi,
You can use the the standard Tcode:VF31.
Process the record if it has errors the line turns to red.Select the check box and click on the Log(Shift+f6)
You will be able to see the error messages for the output type:
Regards,
Saju.S -
T-code/Report for seeing the existing entire GL master data
Dear Experts,
Is there any t-code/Report for seeing the existing entire GL master data at chart of accounts level and company code level.
example :
GL a/c no company_code account_group shrt_text long_text tax_category open_item_management etc
172500 1000 Balance sheet tds pay tds payable * X
Thanks in Advance
Regards,
T.Kartheek
Moderator: Please, search before postingDear expert
you can use f.10 or f.08
2. GL Account Balances (Totals & Balances ) S_ALR_87012301
3. GL Line Items S_ALR_87012282
4.Display of Changed Documents S_ALR_87012293
5. Chart of Accounts S_AL:R_87012326
6.. GL Account List S_AL:R_87012328
7.. Display Changes to GL Accounts S_ALR_87012308
Regards
Ajeesh.s
Edited b
Maybe you are looking for
-
Firefox quits when closing the cover of my MacBook Pro (putting it to sleep)
Self-explanatory (see title). I have a mid-2010 MacBook Pro, running Mac OS X Lion (10.7.3). Whenever I close the lid to put the MacBook Pro to sleep, Firefox quits. I don't think it crashes or hangs; when I open the lid later, Firefox is just not ru
-
See the box model in Design View
This is probably a simple question but I can't seem to figure this out or find out about it in the help.sometines when I'm working on a page element the margnins and padding are shown in the design view window. most often they are not visable. How ca
-
I haven't used my iPod touch in 1 year and I forgot what I had set the passcode. I now need it and need a way to recover it, or if restoration is the only possibility.
-
Postifx user unknown in local recipient table
Good morning -- My fetchmail job has been failing to get mail to my mailbox with this error (presumably from Postfix): SMTP error: 450 4.1.1 <username@localhost>: Recipient address rejected: User unknown in local recipient table (I replaced the actua
-
In Outlook, my default message format includes the following: Font: Arial 10pt font Spacing: Before: 0pt, After: 0pt When I email a link from Firefox, a new message opens, which has the following formatting: If I type anything before the URL, the for