MM Stock transfer from blocked stock between plants
Dear friends ,
Could I transfer material from Blocked stock between plants but in Blocked stock ?
I not found this movement types in ECC.
best regards,
Ale
It is not possible to move blocked stock between plants.
You have to transfer the stock into unrestricted- then you can move it to the other plant- then again a transfer posting into blocked stock.
Similar Messages
-
Stock Transfer of Blocked Stock Plant-to-Plant
Hi..
I have an issue regarding Stock Transfer of blocked stock from one Plant-to-Plant.
I realize that blocked stock cannot be transfered directly.
But the issue here is that if we cannot transfer the blocked stock directly, that means we have to do transfer posting from blocked stock to unrest use then stock transfer using mov type: 301. Then in the destination plant, we transfer again to blocked stock.
If this is applied, then it will potentially raise other issues related to incorrect stock transfer by the other users once the material is released to unrest. use.
So, in short, that's why we need to have direct stock transfer scenario for this issue.
Kindly have your assistance
Thanks in advance
AlbertHello Albert,
You are correct. We can not transfer blocked stock from one plant to another and you have to follow the same steps which you already mentioned.
As per the business logc, We can not move "Blocked" (Business term: Rejected/scrapped/spoiled) material out of our business unit except Retrun to Vendor or Scrap it. so it is also not logical to move "THAT kind of Stock" to another plant.
Hope this helps.
Regards,
Arif Mansuri
Reward if answer is helpful. -
Stock Transfer order Block one supplying plant
Hi,
We are using standard Stock transfer Orders (UB) for transfer the stock from one Plant to another plant.
Our receiving plant is 1000 and others plants available in the organization structures are 1100, 1200 and 1300.
Standard SAP allows to order from 1000 to all the plant 1100, 1200 and 1300.
We want to restrict to a user to create STO for 1300 plant. Means when the receiving plant is 1000, any user must not able to create any UB type Stock Transfer Order to supplying plant 1300.
Please suggest, how we can achieve it without doing the Enhancements.
Regards,Hi,
Isn't it a help if you block the vendor master of that plant? This might be solution based on your organisational structure in SAP.
Regards,
Csaba
Edited by: Csaba Szommer on Nov 3, 2008 1:42 PM
Edited by: Csaba Szommer on Nov 3, 2008 1:43 PM -
Stock transfer from Reservation stock to Unrestricted
Hi
Is it possible to post stcok transfer Reservation stock to unrestricted stock..
Please suggestHi
it is possible to transfer stock with help of reservation ,from storage location to storage location,
plant to plant
but from one stock type to other stock type ( ex.Quality to unrestricted )
i don't think so
Regards
Kailas ugale -
Stock transfer from Unrestricted Stock to Sales Order Stock
Hi,
We have one sceanrio where we are transferring Unrestricted Stock to Sales Order Stcok through TC: MB1B and movement type - 413.
In this the material consumption account of the material hit is assigned in GBB/VBR. Also I have made this GL as cost element.
But during this Stock transfer the system is asking for CO- Object. I dont wantt to have any CO-Object here.
How can we resolve this.
Or is there any other Transaction event key in OBYC that needs to be maintained.
Please help.
Regards
Kamihi
try with 413 E movement type -
Report for stock transfer from plant to plant
Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn -
Stock transfer from plant to depot
Dear Experts,
I have used special procurement type along with additive cost in DEPOT.
There is one more tcode-okyo- Assign origin group to condition type.What is the use of the same?.
one more doubt in STO from Plant to depot
lets say- material(A) standard price in depot 120rs including excise/freight and 100rs in plant
while doing transfer system will dr 120 depotand credit 100 plant and 20 in depot cost center.
I m transferring this 20 rs to depot cost center and when actual freight is coming.i will book the same in depot cost center.
So 20 rs will knock off in depot.
Is it correct approach?
regards
Raman RanaHi Ajay,
If i will maintained Moving price at depot and standard at plant.
Lets say stock transfer from plant to depot
Standard price at plant 100rs
Price at depot=standard price at plantfrieghtinsurance= 120rs
So my inventory a/c at depot 120 rs DR
inventory a/c at plant 100 rs with standard price
frieght and insurance clrg a/c 20 rs
When i got actual bill of frieght and exceise
let say 25 rs
I will debit frieght and insurance clrg a/c 25rs
credit vendor a/c 25rs
In that case i have difference of 5 rs in clrg a/c
Is it correct? or any other way for doing it?
regards
RR -
Stock transfer from a Depot to a manufacturing plant
Hi All
I am doing a stock transfer from a Depot to a manufacturing plant.
I have transfered the material from depot to plant and captured the excise
in register RG23D using transaction J1IJ.Now a goods receipt in done in
the receiving plant in refernce to the outbound delivery.
Now the problem is when a excise is captured using transaction J1IEX in
reference to a Goods Receipt and manually enter the details in the system , it gives me a
short dump of BCD_Divide by Zero.
Please adviceHi,
Go to transaction ST22 it will give you a comprehensive analysis of the dump including the reason. Looks like there is erroneous data.
Regards,
Saurabh Diwakar -
How to transfer material from blocked stock to scrap location
Dear Experts,
Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
Due to this Iu2019m not able to scrap the material from blocked stock.
Pls advise what to do .Is there some other way to do it??
Thanks in advanceHi,
You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
Dhruba
Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM -
Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !
Hi Gurus,
I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
My Query is:
1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
2. What does it mean when we say Material to Material transfer ?
Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
Many Thanks,
MadanHi,
Please help me with pointers on the mapping parameters for this BAPI.
Here are the details which I am using, but gettin error message -
T ID NUM MESSAGE
E /CWM/MM 001 Transfer the parallel entry quantity/entry unit of measure
I have filled below fields:
GOODSMVT_HEADER
PSTNG_DATE 11/25/2009
DOC_DATE 11/25/2009
PR_UNAME MyName
HEADER_TXT TEST
GM
04 (Transfer Posting)
GOODSMVT_ITEM
MATERIAL 100001374
PLANT 1AAE
STGE_LOC B100
BATCH 0111331309
MOVE_TYPE 343
ENTRY_QNT 10.000
ENTRY_UOM EA
ENTRY_UOM_ISO EA
MOVE_MAT 100001374
MOVE_PLANT 1AAE
MOVE_STLOC B100
MOVE_BATCH 0111331309
Need your help to resolve this.
Many Thanks,
Madan -
Report for material moved from blocked stock to unrestricted stock
Hi,
Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
Regards,
PratapIt would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria. -
Stock value for stock transfer from depot (RG23D) to manufacturing (RG23A)
Dear all,
The forum posts that I found are all relating to the process of how to do stock transfer from depot plant to manufacturing plant.
The question I want to post is relating to the transferred stock value.
When stock first goes into depot plant (RG23D), the excise duties (CVD, Education Cess, Higher Education Cess, Secondary Education Cess) are all inventorized. However, in manufacturing plant (RG23A), they are CENVATABLE and not inventorized.
In the transfer of stock from depot to manufacturing, how can we split out the stock value from depot and take out the excise duties to CENVAT in manufacturing plant?
If using Stock Transfer process (move stock from depot to manufacturing),
1. Create Stock Transfer Order in ME21N using UD order type
no accounting
2. Create DO in VL10B and goods issue
During goods issue, moving average of stock in depot plant, will increase stock with the same value in manufacturing plant and reduce the stock value in depot plant. How can we reduce the stock value transferred to manufacturing plant by the original excise duties amount, and pass this amount into J1IEX? Is it done in this step or later steps?
Dr Stock into manufacturing plant [this value by right, should be reduced as it consists of original excise duties in RG23D?]
Cr Stock from depot plant
3. J1IJ- RG23D selection for excise invoice for delivery at depot
no accounting
4. VF01 for proforma invoice
no accounting
5. MIGO into manufacturing plant (capture excise invoice)- part 1 register. the excise duties can be manually keyed in based on the original RG23D entries when stock is first brought into originating depot plant
no accounting
6. Enter Incoming Excise Invoice by J1IEX
Dr CENVAT Input AED
Dr CENVAT Input BED
Dr RG23A ECess
Dr RG23A SHECess
Cr CENVAT clearing
7. Question: Where to Debit CENVAT clearing? In normal domestic purchase process of raw materials into manufacturing plant, Dr CENVAT clearing will be posted during MIRO time.
If this process is not the correct way to do, please advise the standard SAP recommended way to transfer from depot to manufacturing plant.
Thank you in advance.You have to add the Excise duty condition types as a Delivery cost Pricing condition types in STO Pricing procedure and have used them in STO. In Pricing procedure, there is no concept of Deductible and Non Deductible. So, what ever the Delivery cost condition you add in Pricing procedure, the amount gets loaded on to the Material cost..To avoid this, a negative condition type needs to be inserted in Pricing procedure with a different accrual key.
You have to add One Positive condition and One Negative Condition type for the same. Negative condition type is to reduce the condition value from the Material cost during GI.
Try this scenario in development server and revert back with your observations. -
What movment types used for stock transfer from Non-WM sloc to WM sloc?
Hello experts,
Can some one tell me , what movment types used for stock transfer from Non-WM sloc to WM sloc in the same plant through MB1B?
ThanksHi
When I try to use the Movement Type 311 with Tcode MB1B, in order to move the stock from IM storage Locations to WM storage Locations, I do create the Material Document Successfully, but when I try to convert the Material Document to Transfer Order, I get the message "select atleast one storage type first", but there is no storage type appearing on the screen.
Can you please help me to resolve the above issue.
Thanks. -
Stock transfer : From QI to Unrestricted
Hi Gurus,
When I do stock transfer from QI to Unrestricted or blocked, delivery is created and when I go to pick delivery I get following error:
"Select at least one storage type first"
Message no. L3284
Can any one help me out?
Thanks in anticipation.
RajaRamhi
pls maintain picking storage type.
by
ram -
Goods Issue against outbound delivery from blocked stock
Dear All
I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
Please let me know any solution for this.
Thanks and Regards
Satish KumarHi
Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
http://scn.sap.com/thread/1541911
Thank$
Maybe you are looking for
-
Clipboad manager for my issues
Hi! I am using xfce, and my problem is that if you copy text content with mouse for example in a browser window, and then I would paste it to a terminal window (Terminator), I can't do it with usual Shift+Insert, because the so called primary selecti
-
What is this sponsored site in the mail section and how do I stop it?
When I opened my email, there is a "sponsored" add that takes you to a website. I don't know how or why this is in my browser, but I don't like it and want it removed. I can change my browser to a different one.
-
Define Target Version in Controlling Area.
Hi Gurus, I got the error messegae while doing the Transaction KKP5/KKPT. No target cost versions exist in controlling area 1000 Message no. KV031 Diagnosis Variance calculation is controlled by a target cost version and a variance key. Procedure Cre
-
Standby redo log group for particular thread
hi masters, actually i am performing an experiment to create physical standbyt database on the same machine as my primary database. i ma going according to 'data guard admin guide'. while section for ading standby redo log group,it says that you have
-
HT201272 How do I stop something from downloading?
I bought a tv show and it gave me regular and HD version. I downloaded HD version but the the regular want to download also. Which means I will have duplicates of the same show. I have tried deleting and when I sign back into ITunes they are back.