MM-SUS Scenario: MM PO data transfered to SUS but SUS PO creation is fail

Hello All,
In case of MM-SUS scenario, when i created a MM PO and idoc data was sent to SUS, but in SUS transaction SXI_MONITOR i found that the line is scheduled instead of successfully status. In SMQ2 i found the error message: Storage form of product ID not yet defined in Cust omizing. As i know that in MM-SUS scenario, the material master is not needed to maintain in SUS. Please advise how to handle this trouble, thanks,
Best Regard
Joseph Chen

Hi Devi Swain,
Firstly thanks for your reply.
i have setted this configuration as you mentioned, and Prod.ID Lenth = 18, "Display leading zeros" and "save lexicographically" are not ticked. Then the new error message show:Prod.ID Lenth is longer than the customized setting.
By the way, MM material number lenth = 18
Best Regard
Joseph Chen

Similar Messages

My new iMac had the old data transferred in-store but now it won't accept the password on the first screen. How can I reset this? I can't get past the first screen as a result.

I cannot get past the initial screen on my new iMac. Data was transferred from my old computer so when I turned it on It automatically had my name in the window and asked for the password, but none of my old passwords seem to be accepted. How can I fix this?? It's a new IMac with osx.

Which password isn't working? The one to access the iPad or the one to get your hotmail?
If hot mail, you go into the settings, mail, contacts and calendars and edit your hot mail account. Of if it won't edit, delete it off the iPad, then re-add it with the new password.

Getting data transfered from old HD to new ones, leaving 2 slots filled . .

Hello,
*(Below is a thread I started in another forum, but, didn't get my final questions answered (see at bottom of this post in BOLD), and am hoping for further help and suggestions. I know there is a lot to read here, but, I think this information will help other novices, such as myself. Thanks!)*
I have 2 new HDs (each 1T) uninstalled, and I have my old HD (160 gigs) currently residing in one of the two slots in my G5. Any ideas on the best way/process to get the data transfered from the old HD to the new ones, leaving my two slots filled with the 2 new drives AND my data from the old HD transfered and intact, with a RAID0 setup?
OR, are there any other suggestions on a good setup with the 2 new HDs??
I'm open to suggestions.
I always back-up on external HDs, so, is their a need for me to worry about setting up a RAID0??
I'm doing video processing for DVD release.
Should I just max out the 2x1T gig HDs and not worry about a HD failure??
All Suggestions welcomed!!
Thanks, Jack
*FROM THE CUTTERMAN:*
You are limited with only 2 drive slots. In this scenario what usually works best is a small fast drive (eg Velocirapter or SSD) for OSX/Applications and a large drive for video files. It is not advisable to have the operating system running from a striped array.
Since you already have the drives, here is what you can do.
Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions. Be sure that it is GPT-formatted so it can boot.
Use CarbonCopy Cloner to copy your current OSX partition to the new one.
Set the startup disk as the new partition.
Remove the old drive and replace it with the second new one.
Reboot, and partition/format new drive.
*Hey Cutterman,*
Thanks for the advice. That sounds like a good set-up. I'll have to research the process of doing what you've advised, but, should work out ok:
A. Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions:
1. Partitions are done under Disc Utilities correct? Never done it before; will take a look.
B. Be sure that it is GPT-formatted so it can boot.
2. GPT is also done under Disc Utilities, correct? Here I start to get a bit confused, as I've formatted Extended Journal, SO, the partition with the OSX & Applications is formatted GPT, and the rest of the HD is formatted as Extended Journal?
C. Use CarbonCopy Cloner to copy your current OSX partition to the new one.
3. So, I partition the first new HD and use Carbon Copy Cloner (also under Disc Utilities) to copy the OSX & Applications from my original HD to the first new HD, correct?
D. Set the startup disk as the new partition.
4. This will be an option when I setup the partition???
E. Remove the old drive and replace it with the second new one.
F. Reboot, and partition/format new drive.
5. QUESTION: So, you recommend not striping the HDs: If I do a RAID 1, which sets up a mirror of the HDs, and since the first new HD is partitioned with the OSX & Applications, AND is set up as the Startup Disk, then the second new HD will also mirror that?? Another QUESTION: Even if the second new HD does not mirror the OSX & Applications, the second HD will only mirror the space/partition not utilized by the OSX & Applications partition, correct?
Thanks for your help!!
Jack
*FROM THE CUTTERMAN:*
OK I will try to answer your questions. To begin, if you want to mirror the 2 drives then you will need to boot from the SL install DVD or an external (USB/firewire) drive to set it up. IMO for your purposes it is too much hassle and a waste of HD space.
1) Yes partitions are created in Disk Utility
2) Yes, you choose a volume Scheme (ie number of partitions) and size them by dragging the separator bar. Then select the planned boot partition and click Options..., then choose GPT. I think it is usually the default but check and make sure. Extended journaled is the usual format.
3) You need to download Carbon Copy. It is a free tool that will copy the entire image of your current system partition to the new one and make it bootable. Consider making a donation as it is a very useful and frequently updated utility. It is fairly intuitive to use. You can also use the restore feature in Disk Utility but I have had more experience with Carbon Copy.
4) Once the copy process is finished the new boot partition will show up under the startup disk selections (this tool is in System Preferences).
*FROM 666Sheep:*
If may i correct one thing: OP, don't choose GPT (GUID Partition Table). You got PPC Mac (G5), so valid partition type for you is Apple Partition Map (APM).
GPT is for Intel Macs and you will not able to boot from this kind of partition.
*FROM THE CUTTERMAN:*
Thanks for the correction- my bad. No familiarity with non-Intel Macs.
G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD
*Hi All,*
*Since this process will come to a head on Tuesday/Wednesday, and I hope to be successful in transferring Old HD data to new HD/s.*
*A: I'm still a little foggy here, as I thought I'd set up the 2 new T-gig HDs so that if one of them failed, I'd still have the data backed up on the other HD; more ideas concerning this would be reassuring:*
*WHAT DOES "IMO" mean?*
*(IMO for your purposes it is too much hassle and a waste of HD space.)*
*As I understand the points made: After I partition the first new HD, and Carbon Copy data from old HD, I then install second new HD, and this will just act as an overflow from the first partitioned HD, correct? Because, if set up a Raid1/Mirror, the OSX partitioned portion of the first new HD will not copy to the second new HD, and that space on the second new HD will be wasted, correct?*
*Also: I have to set up RAID1 (if I do not set up RAID0), correct?*
*RAID 1*
*From WIKI: RAID 1 mirrors the contents of the disks, making a form of 1:1 ratio real time mirroring. The contents of each disk in the array are identical to that of every other disk in the array. A RAID 1 array requires a minimum of two drives.*
*Carbon Copy is a free tool that will copy the entire image of your current system partition to the new one and make it bootable.*
*1. Is my old HD partitioned? Is that done automatically by MAC prior to PC purchase?*
*2. Do I Carbon Copy the whole old HD or just parts? (eg. OSX, Photo Shop, After Effects, Various Files)*
*3. I read that it is necessary to DEACTIVATE Photo Shop (I have CS3) prior to doing Carbon Copy. Is that correct? If so, does this also apply to other Adobe applications? Such as After Affects, Illustrator??*
*Thanks to all for the help!!*
*G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD*

Confusing Information:
A1: You also want to make sure the drive you are backing up to is formatted Mac HFS Extended (HFS+) if using Mac OS 8.1 or above.
A2: On PowerPC Macs, your clone should be partitioned as Apple Partition Map.
*Q? I thought the new HD (1T) should be formatted in Extended Journaled?*
B: Also disable Spotlight (in 10.4 only) on your destination drive using Apple menu -> System Preferences -> Spotlight -> Privacy to add the destination drive to the pane.
*Q? I'm using 10.4.11, so, I should follow these instructions?*
C: If possible, boot into safe mode to perform the backup (holding the SHIFT key at startup). In addition, you can clone while logged into another administrative user that you don't use at all to avoid further complications of changes which may be happening to your regular user (though don't use Fast User Switching to get into that other user, since that other user is still active when fast user switching is used). Otherwise you are going to be running a backup on a live system which could have changes happening while you are attempting to backup. These may yield an imperfect clone, with uncertain success at recovery. It may be possible that your clone will have its own hardware issues, so make at least two copies.
*Q? ?????????????*
*I GOT THE ABOVE INFO. FROM THE FOLLOWING SITE:*
Making a clone/mirror/duplicate backup
http://www.macmaps.com/backup.html#SHORTANDEASY
*ALSO, WHAT DO YOU THINK ABOUT THE ADVICE ON THIS PAGE:*
http://www.levoltz.com/2010/04/21/how-to-transfer-data-to-your-new-hard-drive/

Data transfers from SRM to R/3

Hi,
i have follwing questions?
1. How date transfer from SRM to R/3?
2. Why PO transfer throught RFC? why not IDoc? and why confirmation and invoices are transfer using IDOC?.
3. config document for EBP-SUS?
Thanks
Rams

Hi Rams,
The data transfers between SRM using ALE (Application Link Enabling) via RFC & IDOCs...
P.O is transferred to R/3 using RFC. Confirmation and invoice through IDOCs.
Since P.O is the leading document and of course legal document, there should not be any duplication. Means if it generates two P.O numbers one in SRM & the other in R/3 they are considered as two different P.Os.And will be an issue during audit.
Where as confirmation and invoice posting documents are internal documents and the docs created in the back end with the back end number range. In this case same number is not mandatory.
Hope this makes you more clear.
Award points for helpful answers.
Rgds,
Teja

Issue in Data transfers using ALE for E-Recruiting standalone system

Dear Experts,
We have an issue in data transfers using ALE. We are having standalone system where E-Recruiting is maintaind seperately and the version is EHP5.
When we configured iDoc in Sandbox and its working fine. But when it comes to Dev and Quality servers this is not working fine.
we have created iDocs using the following filters.
For Object P: Infotypes 0000, 0001, 0002, 0003, 0006, 0024, 0105.
For Objects O,S: 1032, Subtype: 0010
For Object: 1001, Subtype: A003, A008, A012, B007
For Object O: 1001, Subtype: A002, B002, B003, B012, Tyoe of related object: O,S
For Objects: C, O, S, Subtype: 1000, 1002, 1028
For Object:C, Subtype: 1001, Subtype: A007
When we do the data transfers in Sandbox using PFAL it is transferring the data properly.
But when we do the same iin Dev and Quality servers we are not able to do it and gettign 52, 51 errors.
Here we are facing a strange issue. For some Users when we transfer data it is transferring data but with 52 error messgae.
For some users I am getting 51 error where i could not transfer any data.
For some users, when we tranfer O, S, and P related data is moving but getting mostly 52 error and all the relationships are not moving here for O,S and properly. But P related CP, BP and NA are getting created successfully.
It is happening only in Dev and Quality server and that too some users are able to get transferred but not all.
Where will be the issue? How can we resolve this?
Any help will be appreciable.
Thank you in advance.

Hi Sekhar,
Have a look over these threads.
Errors in ALE data transfer to E-Recruiting.
http://scn.sap.com/thread/1535402
BR,
RAM.

Cube to cube data transferred ,and delta status

Hi Gurus
I need to do Portioning in cube
I have a cube Zaa_c01 which is updated by two data source ZDS1 and ZDS2 (Delta Update) I copy the Zaa_c01 and I created new cube Zaa_c02, also I transferred the data to that. But it is shoeing in single request in cube, after partion I again reloaded to ZAA_C01 , know I am seeing only single request in a cube.
Whether I lose delta in this case , or I am missing any step, this activity I done in Development, and need to do in production.
Regards
Shashi

Hai Shashidhar,
Partitioning is split the large dimensional cube into smaller cubes.... regarding performance point of view we have to do this partitioning.
there are two types of partitioning..
1. Logical Partitioning.
2.Physical Partitioning
physical partitioning is done at Database level . and logical partitioning done at Data target level.(EX: Info cube level)
Cube partitioning with time characteristics 0calmonth Fiscper is physical partitioning.(so, we need at leats one of the above time charecterstics for doing partioning...).
Logical partitioning is u partition ur cube by year or month that is u divide the cube into different cubes and create a multiprovider on top of it.
STEPS :
SELECT YOUR CUBE.. AND DOUBLE CLICK IT..->
in the menu's select EXTRAS menu--> in that select -->DB PERFORMANCE sub menu..-> in that again select Partitioning sub menu..
and specify how many partions you want to do...
but you cube should be contain atleast ocalmonth or phical varient should be there...
Prerequisites
You can only partition a dataset using one of the two partitioning criteria calendar month (0CALMONTH) or fiscal year/period (0FISCPER). At least one of the two InfoObjects must be contained in the InfoProvider.
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
Thanks,
kiran.

I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

They will simply use Migration Assistant to transfer your Home folder, third-party applications and support files, and system preferences. This is something you could do yourself. You would need a Firewire cable to connect between your old computer and your new one. Migration Assistant is installed in the Utilities folder of your new computer.
See Transferring files between two computers using FireWire and How to use Migration Assistant to transfer files from another Mac.

Doc type and drilldown Consolidate data transfered from FI

Dear all members,
I config doc type for data realtime update from FI.
But when i run report CX34, doc type of data transfered from FI to EC-CS is blank.
And I can't drilldown this data.
Please show my mistakes
Many thanks,
Orchid
Edited by: Orchid675 on Jul 2, 2010 5:12 AM

Dear Orchid,
in EC-CS the document number and the document type will be new, the doc type info will not be updated so the original FI doc type will disappear.
Typically, in EC-CS all reported financial data (so documents from FI) will be updated with the same doc type at posting level SPACE (realtime update) or 00 (all other).
I hope my question helps.
Ciao,
David

FAQ's, intros and memorable discussions in the Data Transfers Forum

Welcome to the SDN ABAP Data Transfers Forum!
In addition to release dependent information avalaible by:
- pressing the F1 key on an ABAP statement,
- or searching for them in transaction ABAPDOCU,
- using the [SDN ABAP Development Forum Search|https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=&objid=c42&daterange=all&numresults=15&rankby=10001],
- the information accessible via the [SDN ABAP Main Wiki|https://wiki.sdn.sap.com/wiki/display/ABAP],
- the [SAP Service Marketplace|http://service.sap.com] and see [SAP Note 192194|https://service.sap.com/sap/support/notes/192194] for search tips,
- the 3 part [How to write guru ABAP code series|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50] ... (use the search to easily find the other 2 documents...)
... this "sticky post" lists some threads from the ABAP forums as:
- An introduction for new members / visitors on topics discussed in threads,
- An introduction to how the forums are used and the quality expected,
- A collection of some threads which provided usefull answers to questions which are frequently asked, and,
- A collection of some memorable threads if you feel like reading some ABAP related material.
The listed threads will be enhanced from time to time. Please feel welcome to post to [this thread|Suggestions thread for ABAP FAQ sticky; to suggest any additional inclusions.
Note: When asking a question in the forum, please also provide sufficient information such that the question can be answered usefully, do not repeat interview-type questions, and once closed please indicate which solution was usefull - to help others who search for it.
Data Transfers
[The Data Transfer Workbench|http://help.sap.com/saphelp_nw04/helpdata/en/0d/e211c5543e11d1895d0000e829fbbd/content.htm] => Documentation from [help.sap.com] can cover many basic information needs.
Problems with BDC_INSERT => For better answers, please post clear questions with relevant code.
BDC Transaction Vs Session => Different types of BDC, or preferably a BAPI if available.
Data migration procedure and guildlines => An introduction to data migration projects.

Welcome to the SDN ABAP Data Transfers Forum!
In addition to release dependent information avalaible by:
- pressing the F1 key on an ABAP statement,
- or searching for them in transaction ABAPDOCU,
- using the [SDN ABAP Development Forum Search|https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=&objid=c42&daterange=all&numresults=15&rankby=10001],
- the information accessible via the [SDN ABAP Main Wiki|https://wiki.sdn.sap.com/wiki/display/ABAP],
- the [SAP Service Marketplace|http://service.sap.com] and see [SAP Note 192194|https://service.sap.com/sap/support/notes/192194] for search tips,
- the 3 part [How to write guru ABAP code series|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50] ... (use the search to easily find the other 2 documents...)
... this "sticky post" lists some threads from the ABAP forums as:
- An introduction for new members / visitors on topics discussed in threads,
- An introduction to how the forums are used and the quality expected,
- A collection of some threads which provided usefull answers to questions which are frequently asked, and,
- A collection of some memorable threads if you feel like reading some ABAP related material.
The listed threads will be enhanced from time to time. Please feel welcome to post to [this thread|Suggestions thread for ABAP FAQ sticky; to suggest any additional inclusions.
Note: When asking a question in the forum, please also provide sufficient information such that the question can be answered usefully, do not repeat interview-type questions, and once closed please indicate which solution was usefull - to help others who search for it.
Data Transfers
[The Data Transfer Workbench|http://help.sap.com/saphelp_nw04/helpdata/en/0d/e211c5543e11d1895d0000e829fbbd/content.htm] => Documentation from [help.sap.com] can cover many basic information needs.
Problems with BDC_INSERT => For better answers, please post clear questions with relevant code.
BDC Transaction Vs Session => Different types of BDC, or preferably a BAPI if available.
Data migration procedure and guildlines => An introduction to data migration projects.

HR Report for viewing data transferred through CO1P transaction

Hi,
I have query here about HR data transfer which we do through CO1P transaction. How we can view these data transferred through CO1P in HR module i.e. any transaction or report is available from HR side which can give fair idea values which are passed through PP are visible in HR report / table.
Your precious reply in this matter will be highly appreciated.
Thanks in advance.
Regards,
Tejas Pujara

Hi Friends,
I gone through EVHR and another table LSHR as well which is saving entries confirmation timings i.e. time events and time tickets. But to my surprise, respective time fields entries are shown with 0 values in both tables. I cross checked with AUFNR that AFRU entries contain values for standard values i.e. set up , machine etc confirmed properly and updated in AFRU.
But same AUFNR values transferred through CO1P are not updated with those values in HR tables.
Any body can through light on this,
Alternately, let me know in case I need to post this in HCM forum. Kindly suggest me exact where I need to post this since I found so many sub-categories under HCM section of SCN.
Thanks & Regards,
Tejas Pujara

How to measure data transferred through XI in a day (XI 7.0)

Is there any transaction or T code which will help me determine data transferred through XI in a day or any period of time?
Similarly how can I determine the uptime for XI?

Hi,
The amount you see in RWB Performance Monitoring is in bytes, so just divide by 1,000,000 (1024 x 1024 to be exact) to get its MB equivalent or 1,000,000,000 (1024 x 1024 x 1024) for its GB equivalent.
Hope this helps,
Edited by: Mark Dihiansan on Jul 31, 2009 8:09 AM

Using Itunes, I copied all my apps from my Ipod touch to a new Iphone 4. Problem is all the apps on the Iphone are starting up like a new install. I would think my "password" app and "lose it" app would have the past data transferred to the Iphone.

Using Itunes, I copied all my apps from my Ipod touch to a new Iphone 4. Problem is all the apps on the Iphone are starting up like a new install. I would think my "password" app and "lose it" app would have the past data transferred to the Iphone. Is this not possible??

Try this Discussion...
https://discussions.apple.com/message/19529357#19529357

Start scenario when source data change

Hi,
is it possible to start a scenario when a data on one table changes on the source DB ?
For example, an application change a timestamp on a table in the source db, this change triggers the start of the ODI scenario.
Many thanks,
Olivier

Olivier,
Can you create a database trigger on that table and populate a row in another table indicating that the timestamp on the table has changed.
Then, you can use OdiWaitForData tool from toolbox in the package as a Starting step and connect its OK with odiStartScen tool which further invokes the scenario that you want to execute.

I have old Macintosh LC that recently passed on, anyone know where I can get this repaired or have the data transferred into something else?

I have an old Macintosh LC that recently went down. I am located in the Portsmouth, NH area.
Anyone know where I can get this repaired or have the data transferred??

How much $$ do you care to spend to transfer the data on the LC's 40 or 80 MB hard drive? The original LC is now 21 years-old and has little if any market value (I know - I have an LC I and an LC III), so professional repair will easily exceed that. It's considered "obsolete" by Apple's authorized repair shops, so parts are not available. Was it starting up normally before it stopped working, and if so, were the date & time always correct after it had been disconnected from an electrical outlet? If not and if startups have been hit or miss for a while, your LC undoubtedly needs a new PRAM battery installed. It's a 3.6-volt ½AA lithium battery and is installed in a black plastic holder w/retainer cover clipped over it on the LC's motherboard. The battery can be purchased at battery specialty retailers for about $8 or less, as well as from a number of online merchants. If you don't mind paying 2-3 times the value of the battery, Radio Shack carries it. If you need directions for installing the battery, post back. It's the least expensive thing to try and a new battery has brought many a dead Mac back from the dead. As for the internal hard drive, it could be removed and installed in a slightly newer, pre-G3 Power Mac having an internal SCSI bus. If there are any thrift stores in your area, you might find a suitable Mac for this purpose. This would involve removal of the hard drive from the LC and installation in the newer Mac, with a slight change in the LC's SCSI address jumper placement. Once installed in the newer Mac, the files could be copied. If this is more challenging than you planned on, you might check your area for a Mac User Group, where you might be able to take your LC and have someone transfer the files for you. After the files have been transferred to another medium, you may have problems trying to open them on a newer Mac running a newer OS version than the LC's (System 7.0, 7.1, 7.5.x, or 7.6), if the programs aren't compatible.

Slow data transfere using card reader for PE8 on Win7 machine

I just migrated (reinstall) my PE8 on a new PC (from old WINXP SP2 to a high end WIN7 64 bit) .
I have a ordinary card reader (USB 2.0) for my SD,SDHC, and XD cards.
Everything works excellent on the new machine except for the data transfere rate. When collecting pictures, or videos for that matter, with PE8 Organizer. What takes minutes in my old XP machine takes hours (hours for real) in the new machine.
Since PE8 is a 32 bit app I have also tried on the new machine to change the compatibility for C:\Program Files (x86)\Adobe\Elements Organize\PhotoDownloader.exe. I tested with running PhotoDownloader.exe just as on the old box winXP SP2 and SP3. But it made no difference.
I also looked in performance monitor. Nothing of interest. I had lots and lots of power left.
So..
Now I'm stuck. Both on the problem cause search. Or finding a solution. Anyone got any good ideas to make progress.

My main overall objective is to look at the pictures and films. Not work with them as a hobby as such. (even if it is quite fun, but very time consuming. And time I do not have)
0. The vast majority of files are .mts and .jpg
1. Step one is to get them into PE8 organizer.
2. Batch organizing jobs like renaming, tagging, minor quick enanhcement etc
3. Some hands on changes or add ons like back ground musik.
in short
¬ 70 % are trivial at level. Using mainly the Auto stuff. Want to being in control picturens and films and making them more viewable by removing junk and pain just adding minor enhancement.
¬ 25 % at low-medium level
¬ 5 % at medium level
I hope this answer your question. My question is, do you have any idea how to solve the issue?

MM-SUS Scenario: MM PO data transfered to SUS but SUS PO creation is fail

Similar Messages

Maybe you are looking for