MM SUS with ECS activation

Hi,
We have activated ECS in SRM 7.0 with PPS activation.
I want to know is it possible to use MM-SUS.
We have a requirement of PO response and ASN by supplier to be done.
Regards
Sunil

Hi Sunil,
You cannot use MM-SUS with ECS activated.
However you can implement EBP-SUS scenario which will support PO response but not ASN unfortunately.
Regards,
Nikhil

Similar Messages

SRM 7.0 SUS with ECS

Dear Experts,
In SRM 7.0 with Extended classic scenario but found that SUS doesnu2019t support confirmations and invoice postings. Can you please clarify me is there any workaround to achieve this functionality without compromising the technical scenario.
Thanks and Regards,
Venkata Koppisetti.

Your observations are perfectly correct.
Note 700350 - Supplier Enablement: Deployment Scenarios integrating SUS
The extended classic scenario
The shopping cart is created in SAP Enterprise Buyer. The purchase order and follow-on documents are also created there and then replicated to the backend system. The purchase order in SAP Enterprise Buyer is the leading purchase order and cannot be changed in the backend system. Goods receipts and invoices can be pre-entered in SAP Enterprise Buyer or entered directly in the backend system.
SUS: With SAP Supplier Self-Services, you have supplier involvement for the purchase order and the purchase order response as well as for the shipping notification. Documents for confirmation and invoice are not fully supported in the standard. The restrictions for these documents also depend on the SRM release.
I prefer to do Invoice only do in Backend system. There are some poor validation in SRM and lot of data spillage while distributing from one system to another system

I recently got an iPhone 4 out of nowhere it has decided to go to connect to iTunes screen/emergency calls only when I plug into iTunes it states we are unable to continue with your activation at this time please try again later, or contact customer care

I have recently got an iPhone 4 out of no where it has decided to think that my headphones are in and they are not but does work with headphones in.
Then later on within the same day it after turning my phone on and putting it on charge it comes to the screen stating to connect to iTunes/emergency calls only/no service so I connect it iTunes and it says we are unavailable to continue with your activation at this time. Please try again later, or contact customer care.
HELP!

the same problem but i used it already for 3 years my iphone 4, when i update to ios 6.1.3 version, now is failure like said.
we are unable to continue with your activation at this time please try again later, or contact customer care
any help please. i am here in saudi arabia city of jeddah.
thank you very much in advance
pabs

Problem with ECS and XSD

Hi B2B Gurus,
We are facing the problem with ECS and XSD files from past 2 weeks, Steps we followed
1. Created a ECS file in document editor version 11g: 6.6.0
2. ECS files consists only from ST and SE segments
Ex: ST
BCH
CUR
REF
PER -- Exclude
TAX -- Exclude
SE
3: Generated a XSD file from ECS file( File --> export---> Oracle B2B) in document ediotr
4. We imported a ECS and XSD file in B2B console( documents---docdef-transaction set ECS file) and XSD File
5. We tested one file from manually we face below error:
Error Code B2B-51507
Error Description Machine Info: (usmtnz-dinfap19.dev.emrsn.org) Description: Payload validation error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text
and some times it shows Guideline load Error or simply Error
Please help us to resolve this
Regards

Anuj,
We are sending the EDI XML file from backend, then B2B will convert it into EDI file, How can we analyze EDI XML file with ECS file, B2B is not converting to EDI.
1. Can we use 10g ECS file and XSD file in 11G
2. I tried to import it, but it showing below error while doing testing
App Message property     {MSG_ID=90422086, Sequencing=false, DOCTYPE_REVISION=5020, MSG_TYPE=1, FROM_PARTY=EMERSON, DOCTYPE_NAME=850, TO_PARTY=APLL, ATTACHMENT=}
Direction     OUTBOUND
State     MSG_ERROR
Error Code     B2B-51507
Error Text     Error Brief : The element does not include any significant data.
Error Description     Error : The Element PER02 does not include any significant data characters. Segment PER is defined in the guideline at position 3600.{br}{br}This error was detected at:{br}{tab}Segment Count: 11{br}{tab}Element Count: 2{br}{tab}Characters: 5395 through 5397
Created Date     06/20/2011 02:52 PM
Modified Date     06/20/2011 02:52 PM
Note: I used the same files in 10G its working fine.
Regards
Edited by: Francis on Jun 20, 2011 10:48 AM

Can we have more than one attachement to the "Email with Attachment" activity

Guys,
I have a requirement in which the process has n number of approvers in the flow, and each approver can add attachments to the form in the list<document> variable which carries the attahced documents.
At the end of the process i am supposed to send a email with all the attached files to a help desk team.
I know that the Email with attachment activity supports one attachment. is there any posibility or other activity that i can use to send an email with any number of attachments?

Hi Ashok
The service you want is called "Send with Map of Attachments". This service is not on the toolbar.
If you drag on the Define Activity step and type "email" in the Find box you will see under Foundation that there are 3 email services.
Choose Send with Map of Attachments.
For help on this service see: http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000570.html
Diana

View for active Incidents related to WI (Problem) with status (Active) works but can't be changed.

Hi,
I wanted to create a view of Incidents which are linked to a Problem (any problem).
I did a quick test using the Incident (advanced) class, selected to display Incidents with status Active and [Work Item] Is Related To Work Item and status for Problem with the status Active.
At this first test I didn't bother to select any specific columns to display but just went with the pre-selected ( Description, Display Name, Display Name) and it worked.
I got a list of expected Incidents in the view but having the Description column made it quite useless.
So, when I try to select the columns I find useful it will not update and it returns a No items found message instead.
(image removed due to limitations)
It is of course possible to group by one of the Display Name fields and collapse to get a more workable view but it still lacks a lot of good information. One would like to include ID, title, Created date,
date modified, Display Name for Affected User and Assigned to user, and a few others.
I was just a bit stumped as to why this fails when changing the columns on a view that obviously is possible to create.
Thanks in advance,
Daniel

Consider using the Advanced View Editor( or
the free edition), since it has much more robust criteria and column editing capabilities.

I tried to restore, update and back up my ipod touch. once it said it was successful i clicked on the label of my ipod in itunes and it had written, "we're sorry, we are unable to continue with your activation at this time." now whenever i click on the la

I tried to restore, update and back up my ipod touch. once it said it was successful i clicked on the label of my ipod in itunes and it had written, "we're sorry, we are unable to continue with your activation at this time." now whenever i click on the label it just says that and on my ipod it tells me to plug into itunes when it already is. i didnt update restore or back it up with the latest version, so i downloaded the latest version, how do i start the process again so my ipod works!! help this is gay !!

Hmm, well... iTunes trys to activate your iPod using the Apple server to make sure you have bought it legit.
Two things come into my mind:
1) Your iTunes can't access the internet.
2) Apples activation servers are down.
That's just my cents, maybe anyone else has an idea.

I have restored and updated and I get a message saying WE'RE SORRY, WE ARE UNABLE tO COMPLETE wITH YOUR ACTIVATION AT tHIS MOMENT, PLEASE TRY AGAIN LATER, OR CONTACT CUSTOMER CARE would like to know which means that message and I have to do to activate

Hi, I have a iphone 4 with IOS 5.1.1 baseband 04.12.01 AT&T recently release me but I have presented a problem with the activation of the device, I have restored and updated and I get a message saying WE'RE SORRY, WE ARE UNABLE tO COMPLETE wITH YOUR ACTIVATION AT tHIS MOMENT, PLEASE TRY AGAIN LATER, OR CONTACT CUSTOMER CARE would like to know which means that message and I have to do to activate hopefully help me with this problem and I have 3 months with the phone saying same message ...
thank you very much ...

but can not be unlocked
If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T. It CAN'T be used with Tigo or Movistar.
Your post makes very little sense. Maybe you can get some help with English.

OracleApps HRMS-R12.1.3 Integration with MS Active Directory (win 2008 R2)

Dear Friends,
we are using Oracle Apps R12.1.3 and the Microsoft Active Directory : Windows 2008 R2
we have the following requirement:
(1)From Oracle Apps to Active Directory.
-Employee master information needs to be interfaced to Active Directory on a regular interval which should be updated in the active directory.
(2)From Active Directory to Oracle system.
-Whenever new email address for an employee is created in Active directory, the information needs to flow to Oracle HRMS.
Please let us know the method to achieve with minimal latest oracle softwares?
can it be done over coding from oracle apps without new softwares?
Is Oracle Apps R12.1.3 certified with Windows 2008 R2 Active Directory?
Regards,
DB

user564706 wrote:
Dear Friends,
we are using Oracle Apps R12.1.3 and the Microsoft Active Directory : Windows 2008 R2
we have the following requirement:
(1)From Oracle Apps to Active Directory.
-Employee master information needs to be interfaced to Active Directory on a regular interval which should be updated in the active directory.
(2)From Active Directory to Oracle system.
-Whenever new email address for an employee is created in Active directory, the information needs to flow to Oracle HRMS.
Please let us know the method to achieve with minimal latest oracle softwares?
can it be done over coding from oracle apps without new softwares?
Is Oracle Apps R12.1.3 certified with Windows 2008 R2 Active Directory?
Regards,
DBPlease update your original thread(s) instead of creating new one(s) -- Integrate Oracle Apps R12 with Microsoft Active Directory
Thanks,
Hussein

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

HT4061 need help with my iphone 4 i try to update last five days but after updating to 6.1.2 it says that We're sorry, we are unable to continue with your activation at this time. Please try again later, or c

need help with my iphone 4 i try to update last five days but after updating to 6.1.2 it says that
We're sorry, we are unable to continue with your activation at this time. Please try again later, or c

If the iPhone was hacked and unlocked via unofficial means, it has become locked again. Insert original SIM in the phone to activate with iTunes.

I have a toshiba lap top computer with vista and I can not get my iphone to connect all the way .. it says "connected with limited activity"?

I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.

Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks

I have bought Adobe Photoshop Elements 13 and I try to get my serial number with my activation ID but I get a message that my ID is not good. What can I do?

Where can I get a serial number with my activation ID if it dosen't work on the ADOBE site?

Well, for your ID just use the ID and password you're using here. If you meant your redemption code rather than your ID, try this:
Redemption Code Help

What's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?

Hey aries35,
I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
via: iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Delgadoh

Problem with CS4 activation using student users

Hi,
I am working at a school and over the last few weeks we have rebuilt our network from a 2003/xp to 2008R2/Win7 network so have had to remake a lot of software packages. We have created and deployed CS4 with success across the network but seem to have an activation problem with a specific user type.
This user type is with student accounts which use a seperate group policy to the staff accounts. When students log in and the PC has not had any CS4 programs started before, it comes up with the activation window prompting to start a trial (does not work) or activate with a serial number (also does not work), which should not happen as the serial is built into the deployment. When staff log in and run the software it works fine and activates with no problem. So this is not an activation issue, more of a technical issue.
This is causing a problem as for us to activate all of the CS4 software we have to log onto each pc as a staff member, open Photoshop (or another CS4 program), close it then log in as the student for it to work. (This is only needed once per PC, but is time consuming with over 400 computers.)
The only main difference between the staff and student accounts are that students use mandatory profiles (with roaming appdata) and staff use fully roaming profiles. There are other policies in place for students but none that I can see would stop the activation process from working.
So my question is, does anyone know what could be stopping this activation from working?
Thanks,
Joe

Still having the problem, anyone have any ideas what could be causing it? Im at a loss here, ive compared both policies for staff and students but can not work out whats causing the issue.

MM SUS with ECS activation

Similar Messages

Maybe you are looking for