Mobile output error in HTML vs BC export, HELP!?

When I view the site on Business Catalyst the mobile site views properly but when I export it as an HTML and upload it to a different server not hosted in BC it shows differently, HELP! Thanks! See images below for reference...
I have also viewed it in different browsers on the mobile phone... Thanks again!!!
Ok, first off, I have the donswigs.com forward to another site that is hosting the actual webpage and then the address is being masked...
When I go to the direct link, not donswigs.com, the phone view works fine. When I go to the address, the donswigs.com, that's when it show the extra grey space... any fix around for that?
Thanks!!!!!

Hi Helder,
Can you please let me know wether if you have found a solution for  this problem....
Bcoz  i am also facing the similar one now...
please post the solution if you can...
or GURU'S some help please......................
Thanks in Adv
Dev

Similar Messages

  • HTML Gallery Output error.

    I am trying to output a folder of photos into an html web gallery and getting an error.
    Web Gallery Output Error: I get an error when I try and do an HTML Gallery from CS6 Bridge on Windows 7 64bit. After hanging on "generating html for several minutes I get the following error.
    "An error occurred in a bridge extension. JavaScript Error (Auto-Stack Panorama/HDR:3042): Internal error."
    I am using  Bridge CS (Version 5.0.1.23 64bit).
    Windows 7. 64BIT on a PC.
    The error occurs on large and small batches. Preview and Save commands.
    Any help to get this working would be very welcome. I have rebooted to get a clean run of bridge with same results.
    Thank you so much,
    Clarke

    Nix on that. I enabled all previously disabled extensions using Extension Manager CS6 — they were all InCopy-related — and the same error occurs. I should mention the title of the error is 'An error occurred in a Bridge extension.'
    Which is why it's particularly annoying that EM doesn't support Bridge anymore — no way to see which extensions Bridge uses, nor manage them.
    Ah: problem solved. The default font shown was Hobo Std, of all things, and finally Bridge recognized it's a problem font and disabled it.

  • OpenOffice/Go-Office Export to PDF General Input/Output Error

    Okay so I am using the openoffice 3.2 from the latest go-office package. 
    Whenever I try to export something as a pdf, it gives me the following error message in a little window:
    Error saving the document: Untitled 1
    General Error.
    General Input/Output Error.
    I have checked to make sure that I have installed all of the optional, PDF handling packages for openoffice, but I still get this message.  It's odd though, it does export the document to a PDF, but the quality of the font and the images is really bad. 
    Is there any way to fix this? Is this something I need to do a downgrade to fix? Do I need to install the openoffice package instead?
    Last edited by Dr Belka (2010-04-26 21:13:29)

    http://user.services.openoffice.org/en/ … =7&t=29979
    [SOLVED]
    I'm so confused
    Last edited by itsbrad212 (2010-05-08 02:23:49)

  • Error During INSTALL of Application Export File

    An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
    I am receiving the following INSTALL error:
    ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol ",'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)" when expecting one of the following: . ( * @ % & = - + ; < / > at in is mod remainder not rem <an exponent (**)> <> or != or ~= >= <=
    Following is some pertinent (hopefully) information:
    The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
    The common HTML DB (v1.6) instance is on UNIX.
    A new Work Space was created on the same instance.
    A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
    EXPORT INFO -
    File Format: UNIX (also, tried DOS but received same error during INSTALL)
    IMPORT INFO -
    File Type: Application/Page Export
    File Character Set: Western European Windows 1252
    Target Work Space is newly created on the same HTML DB instance.
    INSTALL INFO -
    *Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
    *Build Status: Run and Build Application
    Please refer to above error message.
    Again, any insights or suggestions are appreciated.

    Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
    Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
    ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol ",'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)" when expecting one of the following: . ( * @ % & = - + ; < / > at in is mod remainder not rem <an exponent (**)> <> or != or ~= >= <=
    The "snippet" of Region Sql Select code that relates to the reported error is:
    ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
    HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
    Any suggestions on things to try in order to get application into production is greatly appreciated.
    Thanks, Bernard.

  • Google critical mobile usability errors with my muse website

    Hi. I currently build my sites in adobe muse and export them to a third party to host. I use both google analytics and webmaster tools to keep track of any issues and guidelines that google finds. My sites are exported with both desktop versions and mobile versions of the site.
    Recently I am getting notifications from google web tools telling me the sites I have created have critical mobile usability errors which effects how mobile users are able to experience the site. It also tells me these pages will not be seen as mobile friendly by google search and therefore will be displayed and ranked appropriately for smartphone users. Does google not recognise that a Muse website has a dedicated mobile version and how can I resolve this issue as I dont want this the effect my search results?
    Thanks for any responses.

    I am having the same issue. Google reports the following:
    Usability error
    Pages with errors
    1
    Content not sized to viewport
    7
    2
    Fixed-width Viewport
    7
    3
    Touch elements too close
    7
    4
    Small font size
    7
    One strange thing about this is that there are more than seven pages all tied to master pages, so if sizing were an issue I would expect all of the pages to have issue numbers 1 and 3.
    Please help us Adobe!

  • Internet Explorer Script Errors in HTML Help

    I am using Robohelp 8 HTML. I create both WebHelp and Microsoft HTML Help. My operating system is Vista.
    The WebHelp file will be directly called from the application software to allow users to access topic specific help.
    The Microsoft HTML help is to be attached to my company's website to allow remote users to access our online help.
    I have created a project and generated WebHelp. Everything works as designed.
    However, when I change the output to Microsoft HTML Help, I get Internet Explorer Script Errors when I try to review the output.
    The compiler seems to find exception with two specific lines, specifically, AddMasterBreadcrumbs and again, highlightSearch.
    When I attempt to review the output, I can simply click No when queried if I want to continue running scripts on this page and display the HTML help. It works as it is designed. Naturally I would prefer my users won't have to click through a few error messages to get to the help.
    If I comment these two lines out in the topics, I don't receive these errors.
    Although my work-around will allow a user to open the project without seeing those Script Errors, I am concerned that it might be introducing errors that I haven't found yet.
    Does anyone else experienced this type of error in producing HTML Help?
    Does anyone know the reason this is happening and can they offer an actual solution (and not a workaround?)
    Thanks so much!
    10570Fan

    I've attached one of the screen shots and I took the liberty of posting the htm file (so you can track the specific line numbers to which the error messages refer). The second error message is the same, except it refers to line 117.
    I checked with the developers and they will use the WebHelp version. However, they are curious (as am I) why we get these error messages. Any suggestions you can provide will be appreciated.
    Thanks again.
    10570Fan

  • Disk utility 'input/output error' message?

    I am "creating an image" of a DVD using disk utility (prior to making a copy on a blank DVD disk).   Why am I now rec'ing an 'input/output error' message?   I have already copied several other DVDs from the same author (with her permission, they are not copywrited.) w/o a problem.
    What's going on?  original damaged? an incorrect step on my part?  some sort of space problem?  ( I have tons of room on my iMac.)
    Thanks for your help.

    Take a look at Cinematize 2, I've used it with iMovie 06 and iDVD 08. It has several modes of converting the data. One mode is called "lossless".
    For the job you're doing you may prefer to use iMovie 06 instead of iMovie 08 (I would).
    iMovie 06 and iDVD 08 is a terrific combination.
    Your workflow would go something like this.
    Use Cinematize 2 to create a Quicktime file from the DVD.
    http://www.miraizon.com/products/products.html
    Important that file into iMovie 06.
    From iMovie 06, share to iDVD 08 (assuming you want a DVD).

  • Unable to create "filename.cdr". (Input/output error)

    I am trying to create an ISO from a CD. I've tried using Disk Utility, with all different settings, and Terminal. Additionally, I attempted to make the ISO using an array of third party CD-rippers on a PC. Every platform and method has yielded this error message:
    Unable to create "filename.cdr". (Input/output error) after several seconds of processing.
    I am stuck. The only thing I can think of is that the CD is read-only, though I don't know how to modify my approach in response to this. Can it still be done with a read-only disk? If so, any help in this would be appreciated.
    Beyond that, the disk's format is ISO 9660 (Rockridge). I don't know of any other details to provide, but gladly will if anyone can come up with any.

    Use Toast:
    http://www.roxio.com/enu/products/toast/titanium/overview.html
    or this (dd and/or compile cdrtools):
    http://www.slashdotdash.net/2006/08/14/create-iso-cd-dvd-image-with-mac-os-x-tig er-10-4/
    http://cdrecord.berlios.de/private/cdrecord.html
    (easiest to compile using mac ports)

  • Error loading BASIC document. General Error. General input/output error".

    Error loading BASIC document. General Error. General input/output error".

    I guess your problem is related to StarOffice8, right?
    I had the same issue after upgrading StarOffice7 to StarOffice8:
    http://forum.java.sun.com/thread.jspa?threadID=5287604&tstart=0
    Apparently the .StarOffice8 directory in your export/home directory was created based on .StarOffice7
    directory. Probably here something went wrong. Maybe a bug.
    So the solution is very simple:
    rm -r .StarOffice8 in your export/home directory and restart StarOffice8.
    Or you can also rename the directory.

  • Output Error Message in Flash 8

    Hi All,
    I'm building a form in Flash 8 that includes check boxes.
    When I add the check boxes and test the movie I get the following
    output error message:
    **Warning** The linkage identifier 'CheckBox' was already
    assigned to the symbol 'Assets/UIComponents/CheckBox', and cannot
    be assigned to the symbol 'CheckBox', since linkage identifiers
    must be unique.
    For the life of me I can't get rid of this. Anyone know what
    the heck is going on?
    Thanks,
    Scott

    It appears that the OP has created a MovieClip symbol and
    named it CheckBox, then has chosen to export for actionscript. The
    CheckBox component needs to have that identifier to function
    correctly. So the OP needs either, change the linkage ID on the
    symbol named "CheckBox", or take the linkage ID off
    completely.

  • Output errors show up in Firefox but not IE. Is there a way I can disable this?

    Hello again!
    I've been having a bit of a problem where a dialog box comes up in Firefox that shows data that appears in my output when testing the movie in flash. The game works fine, despite the errors that Flash doesn't like in my actionscript. These are not compiler errors, but messages that appear in my output. The dialog box only shows up in firefox and I have the choice of pressing "Dismiss" or "Continue". Is there a way to make it so this box doesn't show up?
    Here is the link to the game: http://www.djphantasystudios.com/test/ecard.html
    Thanks for the help!
    -DJ

    Try to update to Firefox 8 to see if that helps.
    *Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Tab Permissions: https://addons.mozilla.org/firefox/addon/tab-permissions/
    *ImgLikeOpera: https://addons.mozilla.org/firefox/addon/imglikeopera/

  • [solved] NFS: "ls: reading directory .: Input/output error" after time

    Hello,
    I got the following configuration:
    NFS-server: Always on, connected via LAN.
    NFS-clients: 2 computers, connected via LAN and WLAN. On standby: auto umount NFS-share via system-sleep-hook with systemd.
    This works flawlessly some hours or even days. But after some time, the following happens:
    1. mount nfs-share: no error message
    2a. trying to access that folder via filemanager, e.g. thunar: folder seems to be empty (it isn't on server!), but the correct freesize of the NFS-share on server is displayed in the statusbar.
    2b. trying to access that folder via commandline:
    $ ls
    ls: reading directory .: Input/output error
    The very same worked just a few hours before, I haven't changed anything meanwhile. Apart from standby (--> auto umount NFS-share) and resume (manual mount NFS-share) on the clients which worked before, too.
    Any idea what's going wrong?
    additional info:
    server:
    /etc/exports
    /srv/nfs/myshare 192.168.2.0/24(rw,all_squash,anonuid=33,anongid=33,no_subtree_check)
    (yes, the mapping is needed and right.)
    clients:
    /etc/fstab
    servername:/srv/nfs/myshare /home/carl/nfs nfs4 noauto,soft,user,_netdev,timeo=14,rsize=8192,wsize=8192 0 0
    /usr/lib/systemd/system-sleep/umount-nfs
    #!/bin/sh
    case $1 in
    pre)
    umount -f /home/carl/nfs
    esac
    Last edited by Carl Karl (2014-09-21 17:07:47)

    Indeed, there could be something interesting in dmesg on the server:
    [ 4.190117] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 4.190596] NFSD: starting 90-second grace period (net ffffffff818a9540)
    [ 5.445237] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 5.895519] r8169 0000:04:00.0 enp4s0: link up
    [ 5.895529] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
    [72346.265850] usb 3-1: USB disconnect, device number 2
    [72346.670926] usb 3-1: new SuperSpeed USB device number 3 using xhci_hcd
    [72346.684585] usb-storage 3-1:1.0: USB Mass Storage device detected
    [72346.684716] scsi5 : usb-storage 3-1:1.0
    [72347.686518] scsi 5:0:0:0: Direct-Access WD Elements 1048 1022 PQ: 0 ANSI: 6
    [72347.687606] sd 5:0:0:0: [sdc] 976769024 512-byte logical blocks: (500 GB/465 GiB)
    [72347.690295] sd 5:0:0:0: [sdc] Write Protect is off
    [72347.690301] sd 5:0:0:0: [sdc] Mode Sense: 47 00 10 08
    [72347.692981] sd 5:0:0:0: [sdc] No Caching mode page found
    [72347.693025] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [72348.135398] sdc: sdc1
    [72348.141458] sd 5:0:0:0: [sdc] Attached SCSI disk
    [72348.455737] EXT4-fs (sdc1): recovery complete
    [72348.455919] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [74276.020331] EXT4-fs error (device sda1): ext4_find_entry:1310: inode #14024711: comm nfsd: reading directory lblock 0
    [74276.021107] EXT4-fs error (device sda1): ext4_find_entry:1310: inode #14024711: comm nfsd: reading directory lblock 0
    (last one repeats several times...)
    Indeed, the NFS-share resists on a external WD harddrive connected via USB, /dev/sdc1.
    As suggested in the NFS wiki article, the NFS-share is a bind-mount:
    /etc/fstab on server:
    # fake-root for NFS
    /magnet/owncloud/data/carl/files /srv/nfs/myshare none bind,noauto,x-systemd.automount
    while /srv is on /dev/sda1.
    The external harddrive has an auto-standby (NOT hdparm...) which isn't causing troubles with other services.
    So it seems to be a problem connected to this bind-mount to external USB setup....
    I'll try to find out whether there is  a way to avoid that.
    Thanks so far!
    Last edited by Carl Karl (2014-09-16 14:30:02)

  • Output errors and interface resets.

    hi Netpros,
    Any idea as to what could be causing output errors and interfece resets on the radio interfaces .. The output interpreter from Cisco does not show any information about the radio interfaces
    please see this output after clearing the counters
    Dot11Radio0 is up, line protocol is up
    Hardware is 802.11G Radio, address is 0015.c7a8.3d90 (bia 0015.c7a8.3d90)
    MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
    reliability 255/255, txload 1/255, rxload 1/255
    Encapsulation 802.1Q Virtual LAN, Vlan ID 1., loopback not set
    ARP type: ARPA, ARP Timeout 04:00:00
    Last input 00:00:07, output 00:00:00, output hang never
    Last clearing of "show interface" counters never
    Input queue: 0/75/962/0 (size/max/drops/flushes); Total output drops: 181678
    Queueing strategy: fifo
    Output queue: 0/30 (size/max)
    5 minute input rate 4000 bits/sec, 6 packets/sec
    5 minute output rate 1000 bits/sec, 1 packets/sec
    39213813 packets input, 3905641263 bytes, 0 no buffer
    Received 53803 broadcasts, 0 runts, 0 giants, 0 throttles
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
    0 input packets with dribble condition detected
    21236022 packets output, 3766719027 bytes, 0 underruns
    11617 output errors, 0 collisions, 25 interface resets
    0 babbles, 0 late collision, 0 deferred
    0 lost carrier, 0 no carrier
    0 output buffer failures, 0 output buffers swapped out
    Any input is much appreciated.

    Let's take a look at what you're worried about: 11,617 output errors divided by 21,236,022 packets output = 0.05% loss. Not really much to worry about there.
    As for the 25 interface resets, that's one reset for every 849,441 output packets. Again, nothing really to worry about, but one does wonder why those numbers are not zero.
    So how about taking a closer look at the following line you reported:
    Input queue: 0/75/962/0 (size/max/drops/flushes); Total output drops: 181678
    Notice in particular the "Input queue drops = 962" and more importantly, the "Total output drops = 181,678". You can find detailed troubleshooting information about these problems at: http://www.cisco.com/warp/public/63/queue_drops.html to help you figure out what the actual problem is and whether or not it can be rectified by fine tuning your parameters.
    FYI: Here is a standard definition of Output related errors: (taken from http://www-commeng.cso.uiuc.edu/uiucnet/reports/glossary.html )
    Output Errors
    - Output errors are the sum of all the output errors that occur on an interface.
    Out Success With Retry Errors
    - Out Success With Retry errors are output errors which indicate that a frame successfully transmitted after one or more collisions. Out Success With Retry Errors are the number of frames that experienced a a collision and retransmit before success. The total collisions divided by the number of Out Success With Retry errors will provide the average number of collisions per packet transmitted with collisions.
    Out of Window Collisions Errors
    - Out of Window Collisions are a type of output error. Out of window collision errors occur when a frame in the process of being transmitted collides with another frame. This error usually occurs either when some interface on the network fails to defer or the network has too many stations. (See Late Collisions.)
    Output Discard Errors
    - Output Discards are output errors that occur when the router has to throw a packet out instead of queuing it for transmission on the Ethernet. Output discard errors usually indicate that the network has more traffic than it can handle. They may also indicate a software discard such as no route to destination.
    Output FIFO Overrun Errors
    - FIFO Overruns are a type of output error. Output FIFO Overruns occur when the output queue in the adapter underflowed while putting a frame on the wire. This problem occurs when the interface is not receiving bits of the frame fast enough.
    Walt

  • External Hard Drive Input/Output error

    I recently started having problems with an external hard drive setup that I did not have problems with prior to upgrading to 10.5.5 and trying to setup the drive to be compatible with Time Machine.
    The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
    The first problem I ran into since upgrading and reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
    Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
    I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
    I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
    Thanks,
    Paul Rugg

    Thanks for the suggestion.
    Do you think that would work better than Drive Genius? I bought Drive Genius 2 and it does not even see the drives when they are plugged in unlike Disc Utility which can see the drives but cannot mount either one.
    Maybe this following post I made to a different questions may help. The data on the drive is other buying another program for if it will work. I think my next step may be to go over to a friends place and try to mount the drives on his computer and transfer stuff off if they connect.
    text below posted to other question relating to external hard drive problem.
    I have recently had the same mounting issue with my new external hard drive. I just purchased a new 750Gb Western Digital Sata drive and got everything transfered over to it. Immediately, I got an error saying that the drive had been ejected incorrectly even though it was still plugged in. I was a little curious. I restarted the computer (hard drive still plugged in via USB 2.0) and the drive showed up just fine. I plugged another 250Gb drive into the same case (2 bays) and the 250GB drive showed up just fine.
    Well, I then noticed there was an OS upgrade available when I ran Software update so i ran it and when I rebooted the drives were gone. I can see the drives in Disc Utility, but they will not mount. Drive Genius cannot see either disc. Disc Utility says I need to repair the drives, but when I do it says they are fixed but they don not mount.
    The problem really seems to be related to mounting USB external drives. I got ahold of 2 seperate external firewire hard drives and one shows up just fine while the other has the same problem (both work on other systems. I would try wiping the drives and reformatting but ALL MY stuff is on them and not everything has been backed up. Yuck! I have not tried connecting my hard drive to another Mac yet.
    The drives being used are #1 Maxtor Maxline Plus II 250GB SATA/150 HDD 1.5b/s 7Y250m00654ra
    and #2 Western Digital WD7500AACS WD Caviar GP Green Power drive.
    I have another post similar to this and I have not received any feedback, but I have been doing my own searching and have found similar posts on the net.
    Anybody have any clue what might be going on here? It really seems to be related to my upgrade.

  • I keep getting this error in Dreamweaver when I am trying to upload my website?  Can you tell me what I am doing wrong?  here is the error message: /html - error occurred - Unable to create remote folder /html.  Access denied.  The file may not exist, or

    I keep getting this error in Dreamweaver when I am trying to upload my website?  Can you tell me what I am doing wrong?  here is the error message: /html - error occurred - Unable to create remote folder /html.  Access denied.  The file may not exist, or there could be a permission problem.   Make sure you have proper authorization on the server and the server is properly configured.  File activity incomplete. 1 file(s) or folder(s) were not completed.  Files with errors: 1 /html

    Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
    Mylenium

Maybe you are looking for

  • F110 Proposal Error

    Hi, I am getting the following Proposal Error in F110. Job started Step 001 started (program SAPF110S, variant &0000000167782, user ID INTCOPAYMENT) Log for proposal run for payment on 20.09.2011, identification ZR496 Due items with currency USD, pmn

  • Video plays but do not hear sounds

    I have exported my video and downloaded it to my ipod but when the video plays, i do not hear the sound. The sound works when i listen to music though, any ideas on why sound doesnt work w/ video?

  • Need help reporting

    Hi all, Before excuting query one pop up box coming in that i dont want to populate one field how to remove that field (that is restricted key figure) Eg: one key figure like current fiscal year and one is previous fiscal year these both are populati

  • Export layers to JPG file

    Hi, I wants to export only a single layer as JPEG file in Automation plugin. I have gone through the the implementation in which every layers in the current document is exported as files. But i wants to export any particular layer. I had searched the

  • Image motion tween

    I'm trying to motion tween jpeg image from one side of the screen to another but by the motion everything gets so framey instead running smoothly. I tried to convert image to the movie clip and I tried increase number of frames and fps but with no su