Mobile phone situation

How do I get  internet on my mobile phone I've tried many times but it is still not working and I need some instructions on how to fix my internet on my mobile phone

Address the issue with Ebay, Apple has nothing to do with this.

Similar Messages

  • HT4993 hello i would like to ask .. how much need to know mobile phone's code? thank you

    i would like to ask .. how much need to know mobile phone's code? thank you

    Did you already try the suggestions from this article?
    Symptoms
    In certain situations, iPhone may present one of the following symptoms:
    "Invalid SIM" or "No SIM Card installed" alert appears intermittently.
    Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
    Resolution
    If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
    Update your iPhone to the latest version of iOS.
    Toggle Airplane mode On and Off.
    Try turning iPhone off and then on again.
    Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
    Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
    Restore the iPhone.
    copied from iPhone: Troubleshooting No Service or No SIM

  • Problems calling image on J2ME mobile phone screen

    I have an image size (160kb) of certain size and width. I am calling this image onto a mobile phone screen (j2me) and upon calling this image, I am getting OutOfMemoryException. Sometimes, I do get the partial image displayed on the phone screen.
    My requirement is either reduce the size of the image or avoid the OutOfMemoryException. Does anyone has gone through the similar situation. Any ideas on how to solve this problem is greatly appreciated.
    Thanks,
    coolers.

    Thanks for the response. I posted it there.
    Here is the link
    http://forum.java.sun.com/thread.jspa?threadID=682766
    Thanks,
    Coolers

  • Mobile phone regarding

    purchased nokia lumia710 phone about a month ago from agrawal mobile communication road aligarh after two days from the purchasing a lot of problems were arising..i go to the nokia care center situated at yash communication kisanpur tiraha ramghat road aligarh ....i explained a huge list of prob.(applications are not downlodng from market place,call end prob.ussd service not working,phone heatup,battery backup,network issue,phone restart ,reeboots,sound fluctuation in handsfree on calling.etc)they said that they check if there is a software prob.they updated the software twice but only the handsfree problem was resolved...they said that their is your network provider issue of not downloading the application.i came to the vodafone store and activated 3g pack worth rupees of 600@2gb on my phone..after this the moile is not able to download applicaton of 1mb in 3 to 4hours..also using my wifi connection to download the applicaton but seems to occur the same prolem."download pending". their secured wifi connection to download the applicaton butkn they aren't abe to downoad even a single application in 2hours...all probl. are as it is..only handsfree prob.is resolved..battery heatupup,phone restart reboots,ussd not working,sound prob.downloading. is as it is..they said we have to send the cell to the company .i said ok..they give me 10-12days timing..after 15days my cell came from nokia company...on the time of delivery i checked the prob..the battery backup phone heatup,and marketplace apps downoading prob.is same as past....i tried about 2hours for downloadng the appication through noka care center wifi connection.but i was unable to downloading a single applicaton.nokia care manger also tried about an hour but they wouldn't able to downloadng any of the apps.they said i bring your home to my cell and i check it properly that what is prob...next day i came the service center so they said it has a hardware problem..we have to send the cell to company again..i requested that sr it is my new cell please replace it because in only 5-6days of purchasing major problems is coming..and you also checked and send the cell to the company...but they said we can not do anything we have only one option to send the cell to the company if u wish to send the cell to the company again we will send it..i sad ok..after 10days the cell was came from nokia....this time ony marketplace downoading prob.is resolved other problems....like battery backup,,phone restart-rebots,network issue,ussd isse,call ended issue,are same..i compromised that one probem is resolved but i wll manage ..after 2days new probems are arise .error in connecting zune ,synchronsation failed,,,phone heats,,battery not work more than 2hours...i go to the service center they say that we check..after cheking they do some work on phone for the phone heatup prob...the problem wasn't resolved i requested them to replace my handset but they start misbehaving like we can't do anything..we are unable to replace the phone etc..i sad i dont want to speak u more i dont want anything ok........tomorow the software update is released v7.10 for lumia 710 in which there is many of my prob.was fixed..i came to the nokia care center and said for software update they maked my jobsheet and said for waiting till your phone gets updated(approx 10minuts),i wait there for 1hour after this they are saying that your phone has a software problem and we have to send it to the company...i show anger on them..that i m not fool i want my phone replaced they said we only send your phone to the company we cannot do anything..

    Hello Al,
    I have a feeling it's going to be too difficult, perhaps even for Sound Soap. I think Sound Soap learns a frequency level of the noise you want cut, and it suppresses that.
    I've been able to manually do this using FCE's parametric equaliser (with a bit of frequency calculation) for general background hum (like 50Hz electricity hum), but I fear the mobile phone interference contains too many frequencies.
    Anyway, worth a shot at posting this query in this forum.
    cheers,
    pacpac

  • Remove headset / handsfree on IP Mobile Phone 7925 - when remove headset, setting don t change

    Remove headset / handsfree on IP Mobile Phone 7925 - when remove headset, setting don t change, the phone stay on headset setting and we are oblige to restart the phone to go back to a normal situation.
    Regards - Olivier

    The driver show up in the hardware list. However, BT does not show up as a choice for the headset in the application. It has in the past, but after the the hard drive was replaced and a new workstation image created, that no longer happened.

  • Ipad 2 is associating with mobile phone # instead of it's own #

    Hi I recently update to iOS 6.1 on my iPad and when it was all finished with the update i was distracted when it asked me about my phone # for facetime and messaging and i just hit ok then later I realized it pulled my mobile phone # into it instead of it's own number and I can't get it out of there. I restored it back to factory settings and a back up before I turned on my data plan and added it's own number and I still can't get rid of my mobile phone number or change it back to it's own data plan # HELP!

    That doesn't solve the problem. I have all those defaults. But in Firefox, it won't let me select for "Portable Document Format" to "Use Adobe Acrobat (in Firefox)" which it used to let me and which is what the Mozilla Firefox help stuff says to do. I can select Adobe Reader but then it downloads it and opens it in a separate reader window rather than using the plugin. If I select to let Firefox "Preview in Firefox", then the Firefox built-in PDF reader will display it. I have added an add-on "pdfViewerSwitcher" which then lets me display in the Adobe Reader plug-in but only after first displaying it in the Firefox preview. So that verifies that the Adobe Reader plug-in works. But I can't set it to always use the Adobe Reader plug-in.
    I have some reasons for wanting to use the Adobe Reader plug-in. I use Nuance Power PDF Pro for editing and doing other things with pdfs.
    This all used to work and stopped working at some point in the last couple months. And if you search the web, you will find I am not the only one with this complaint.
    I don't know whether it is Adobe's fault or Mozilla's fault but at least one of them is broken. And I think it is Firefox since it won't even let me select it but does let me select it for Adobe Forms.

  • Error when trying to sign in on mobile phone

    Dear Admin,
    I want to browse the ORACLE ADF FORUMS in my mobile phone (nokia x2-01 with UC and Opera mini Browser), the forum page opens correctly but when i try to signin it gives me error.
    ORACLE ACCESS MANAGER
    ERROR:
    System error. Please re-try your action. If you continue to get this error, please contact the administratorIts strange that when i try to do same using my PC it works......
    Any Ideas?? Can any one there resolve this issue....
    Regards,
    Santosh

    Probably because Opera is a non-supported browser on Oracle sites...

  • Can not see the contacts in E63 mobile phone

    Hi,
    I amusing E63 mobile phone. I am not been able to view the contacts in the mobile, so not been able to use the same. But when an incoming call comes in I do get the name resolution of the person calling and his mobile no which is stored in the contacts.
    I tried backing up the mobile and all the time the backup of contacts could not happened and besides Contacts rest all is backed up....
    Pls do let me know how to resolve this issue..
    Thanks in advance...

    Hey  kartik_sh
    Welcome to the forum, your contacts are on the sim card and they will need to be either copied to Contacts on your phone for easy access.
    It is not clear from your description what could be causing this issue, so I will present a couple of possibilities. The first is that the contacts that you cannot see are stored on the SIM card and not in the phone memory, to remedy this you can follow these steps to copy your contacts into the phone memory:
    Menu>Communic.>Contacts>Options>SIM contacts>SIM directory>Options>Mark/Unmark>Mark all>Options>Copy to Contacts
    If this is not the case, and if after selecting Contacts you see the options Go Online and ChatServiceBuddy, it means that the ”Ovi Contacts Chat” service is selected as the default view. This service has been discontinued and replaced by Nokia’s new Chat service powered by Yahoo. You can set your default Contacts view back to the contact information stored in your phone by following these steps:
    •Select Menu>Communic.>Contacts
    •Press the left navigation key to select the central field at the top of the screen, then press the centre of the navigation key to open the menu, and finally select Phone
    •You should now see the contacts stored in phone memory. To make this the default view, select Options>Settings>Default contact list>Phone
    If you are interested in the new Chat application, you can switch the Contacts view back to the Ovi Contacts view, select Go Online and sign in with the same user identity and password that you use to log into this forum. Your phone would then remind you that Ovi Contacts Chat is discontinued and take you through the steps to download and install the new Chat application. We would recommend that you use a WLAN connection for this.
    If the two suggestions above do not resolve your issue, we can investigate further.
    Out of interest, when you say that creating a back-up did not successfully back-up contacts, do you mean that you created the back-up with Nokia Suite and the report displayed at the end of the process indicated an error? If there was no error during the back-up process, it is likely that the back-up was successful and we still need to work out whý the information is not appearing in your phone.
    Let me know if it works 
    Kind regards
    Carl
    If this post answers your question, you can help others by clicking the green accepted solution' button.
    Please ask your questions to the main board and not to my mailbox. Thank you.

  • How do I know if my Edge Animate compositions will scale up or down to fit each mobile phone platform's resolution? iPhone 3s, 4, 4s, 5, and 5s all have different resolutions. Do I use .png or svg?

    I want to use Edge Animate to create native app in PhoneGap Build. How do I know if my Edge Animate compositions will scale up or down to fit each mobile phone platform's resolution? iPhone 3s, 4, 4s, 5, and 5s all have different resolutions. And do I use .png or svg?

    If you use responsive scaling it will definitely scale .
    For best practises regarding graphics refer
    Edge Animate Help | Best practices for graphics in Adobe Edge Animate

  • How do I use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?

    We are attempting to use SharePoint 2010 in combination with Exchange 2010 to implement shared calendars and contact lists throughout our organization.  We are able to connect the lists to Outlook 2010, but have been unsuccessful in viewing
    the calendars and contact lists from our mobile phones.  How do we use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?
    In trying to answer this question, we have come across a few different possibilities, all of them falling just short of a long term solution for us.  After doing research, we found that Active Sync will only show the default folders of the account.  To
    solve this, we downloaded an Add-In for Outlook (CodeTwo FolderSync) to synchronize folders and synchronized our SharePoint list with a new Contact list in the default folder.  The issue we came across with this method is that the Add-In we are using
    is not capable of automatic synchronization.  There is a button and it must be clicked after every update is made, which is not ideal for our solution.  We then went to the company (CodeTwo) and found server side software (Exchange Sync) that they
    offer which will automatically synchronize the folders.  After installing that on the Exchange Server, we now are running into the issue of not being able to locate the SharePoint lists on the Exchange Server.
    Does anyone happen to know how we can get to the SharePoint lists from the Exchange Server?  Has anyone else been able to use shared contacts lists and calendars from SharePoint on their mobile phones using Active Sync?  If so, are we in the right
    direction with what we have found so far?
    Thanks,
    Brad

    You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
    Use Microsoft SharePoint Workspace Mobile
    http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
    iPhone SharePoint Apps Shootout
    http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx 
    Comparing SharePoint iPhone Apps
    http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
    MCTS: Messaging | MCSE: S+M

  • Using HP ePrint with mobile phone internet connection

    Hello, I have a peculiar problem.
    I have an HP Officejet 4630 e-All-in-One series printer and I want to set up HP ePrint.
    I have internet connection for my laptop computer, which is the computer I use. It too is a HP. To set up your HP ePrint account you need the printer's code number which can be printed from the printer's control panel. Once you have the printer code, you can then enter it in to your account to add your device. My problem is that my interent connection is the mobile phone which I use to connect my laptop to the internet. The printer is then connected to the computer using either the direct wireless feature or using the supplied USB cable. Because of this, I can't obtain the printer's code, from the printer's control panel. I do not use landline internet connection as the mobile phone is used as a modem.
    What do I do?????????
    Can I just phone technical support and ask them to email my printer code??????
    This question was solved.
    View Solution.

    Jagaccountant wrote:
    ... Can I just phone technical support and ask them to email my printer code??????
    Hi,
    No, this is not going to work and WON'T work at all. Your printer MUST be connected to the internet to allow ePrint to work. No point to send an email to printer and it is NOT there.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My nano SIM works in my Nokia mobile phone but "No SIM" when in my iPad mini

    I've been around the support loop a few times with varying levels of success, here is my story.
    Basically I expect to only occasionally require mobile data services so would like to move my nano SIM from my Nokia mobile phone to the iPad mini as and when required. I have a 500Mb data allowance on my current contract with Vodafone UK which I never use but would like to access with my iPad mini.
    The first time I tried it worked! I never tried to surf using it but it registered with Vodafone UK OK and had a good signal level. The second time “No SIM” or “SIM not installed” popup at bootup.
    Now irrespective of contracts, tariffs, data plan etc I expect the iPad mini to recognise there as being a SIM present every time and never give “No SIM” except of course when there isn’t one physically in the thing.
    Playing along to support and forum suggestions I’ve done a couple of device resets (software reinstalls) and various setting resets. But still “No SIM”.
    I’ve also spoken with Vodafone UK and am investigating whether this is in fact some restriction where they’ve restricted the technology so SIM swapping is not allowed. My Nokia E51 is not locked as have had it years.
    I just cannot get past the “No SIM” message though!

    Do have the details as to why that is?
    The single time it recognised the nano SIM and showed as being connected to Vodafone UK I tried to ring it to see what would happen, it just rang out until voicemail picked up but nothing happened on the iPad mini whatsoever.

  • How to connect PC to a mobile phone to make a call.

    Hi all,
    I want my PC to control the mobile phone (its a CDMA phone). I want to connect the phone with my PC through some cable, then I want to control the phone using the program running on my PC.
    Like, I want my program running on PC to make calls through the mobile phones.
    Does anyone have any idea that how can I do it, what API should I use, any sample code or example.
    Thanks.

    Except TextNow is another Voip service. Just like Skype, Viber, etc. It may be a good Voip product but it doesn't use the mobile cellular network which is what the OP was interested in.
    http://support.textnow.com/entries/20588531-What-is-the-Difference-between-A-Tex tNow-Phone-Number-and-TextNow-Address-
    Many iPad models now have exactly the same hardware as iPhones and should be completely capable of making and receiving calls and texts using a cellular network. Yet they cannot, because Apple limits this functionality through the ios.

  • Satellite M40-237: How to connect the mobile phone with Bluetooth

    I have a new Noki 62333 and I have a Satellite Toshiba M40- 237. I have a big problem with the conection between them. I don t know how to turn on bluetooth on my pc. Can you help me????

    Hello Iva
    A friend of mine has Satellite M40 and I know that this unit is delivered without BT module. If the unit has BT module you will find BT label on the bottom side of your notebook.
    To establish BT connection with his mobile phone he uses BT USB stick.
    By the way: does Iva comes from Zagreb, Croatia?
    Bye

  • Mobile menu works on pc but not on mobile phone

    If I test the link, below, on my PC (it is my mobile phone menu), it works fine.
    If I test it on my Galaxy S5, however, it seems to cycle back to menu without displaying the link.
    Can anyone help me with this?
    Glenn's Photographs
    Thanks,
    Glenn
    Here is the actual code:
    <!doctype html>
    <!--[if lt IE 7]> <html class="ie6 oldie"> <![endif]-->
    <!--[if IE 7]>    <html class="ie7 oldie"> <![endif]-->
    <!--[if IE 8]>    <html class="ie8 oldie"> <![endif]-->
    <!--[if gt IE 8]><!-->
    <html class="">
    <!--<![endif]-->
    <head>
    <meta charset="utf-8">
    <meta name="viewport" content="width=device-width, initial-scale=1">
    <meta name="description" content="Photographs and Paintings">
    <meta name="keywords" content="photographs, creative photographs, art, painting, paintingst">
    <meta name="author" content="Glenn Abelson">
    <title>Glenn's Photographs</title>
    <link href="../../boilerplate.css" rel="stylesheet" type="text/css">
    <link href="../../index.css" rel="stylesheet" type="text/css">
    <!-- Redirect for mobile phone -->
    <!--
    To learn more about the conditional comments around the html tags at the top of the file:
    paulirish.com/2008/conditional-stylesheets-vs-css-hacks-answer-neither/
    Do the following if you're using your customized build of modernizr (http://www.modernizr.com/):
    * insert the link to your js here
    * remove the link below to the html5shiv
    * add the "no-js" class to the html tags at the top
    * you can also remove the link to respond.min.js if you included the MQ Polyfill in your modernizr build
    -->
    <!--[if lt IE 9]>
    <script src="//html5shiv.googlecode.com/svn/trunk/html5.js"></script>
    <![endif]-->
    <script type="text/javascript">
      <!--
      if (screen.width <= 600) {
        document.location = "index_mobile.html";
      //-->
    </script>
    <script type="text/javascript">
    <!--
    <!-- Specifically for iphones -->
    if ((navigator.userAgent.match(/iPhone/i)) || (navigator.userAgent.match(/iPod/i))) {
       location.replace("index_mobile.html");
    </script>
    <script src="../../respond.min.js"></script>
    <style type="text/css">
    -->
    body {
        background-color: #3b424d;
        background-image: url();
    body {
        background-color: #3b424d;
    #apDiv1 {
        position: relative;
        width: 200px;
        height: 115px;
        z-index: 1;
        left: auto;
        top: 1px;
    #bkgrnd {
        position: absolute;
        width: 326px;
        height: 637px;
        z-index: 1;
        left: 4px;
        top: 12px;
    a:link {
        color: #9FF;
    a:visited {
        color: #FF9933;
    a:hover {
        color: #FFC;
    #apDiv2 {
        position: relative;
        width: 289px;
        height: 84px;
        z-index: 2;
        left: auto;
        top: 233px;
        color: #FFF;
    </style>
    </head>
    <body><!--<div class="gridContainer clearfix"> --><img src="images/index_mobile2.fw.png" alt="Glenn Abelson Photographs" usemap="#Map" longdesc="http://www.abelson.com">
    <map name="Map">
      <area shape="rect" coords="16,8,50,29" href="../../index_mobile.html">
      <area shape="rect" coords="30,247,211,271" href="creative_part1/index.html">
      <area shape="rect" coords="30,277,213,293" href="creative_part2/index.html">
      <area shape="rect" coords="32,323,111,345" href="landmarks/index.html">
      <area shape="rect" coords="27,296,109,320" href="animals/index.html">
    <area shape="rect" coords="32,351,112,368" href="landscapes/index.html">
      <area shape="rect" coords="32,422,98,444" href="people/index.html">
      <area shape="rect" coords="32,444,118,465" href="perspectives/index.html">
      <area shape="rect" coords="30,471,123,495" href="street_scenes/index.html">
    </map>
    <!--</div>-->
    </body>
    </html>

    All the menus are image maps. Three out of four work.
    My div text menu on  top of an image gave me similar problems.

Maybe you are looking for

  • Chunked Transfer Encoding - Doesn't work due to implementation bug?

    Hello All, I'm tackling the infamous "transfer-encoding: chunked" issue on trying to send POST data from the J2ME emulators and devices greater than 2048 bytes (or whatever the internal buffer size of a specific device might be). The nginx server on

  • Work flow - user is not reciving mail,once CREDIT MEMO submits for approval

    Hi All, Please find the issue as below. User created the credit memo and submitted for approval. user is expecting the mail in his mail-box, once he submitted the credit memo for approval and same way once approver approved the credit memo, user is e

  • My list of Nexus problems:

    First Android phone, bought-out AT&T contract to switch to Verizon ... for the network. :-/ 1. Reception Phone will periodically lose signal altogether as I move around inside my house. Never had ANYthing but 4-5 bars with my iPhones (switched b/c of

  • Unable to open pdf from chrome or firefox on my macbook since the update.

    I have a macbook pro. I use chrome or firefox in order to web browse. I have Adobe always running on the bottom of the screen. When I try to open pdf files from the web, it tells me that I need to end license agreement. I cannot figure out how. Howev

  • Speeding up system to maximum

    which is faster; readyboost using the fastest flash drive or readycache using the fastest ssd? can i use an ssd for my OS and still use these cache technologies to speed up my system?