MobileMe on one Mac but not on the other

I have two Macs. Both OS 10.5.4 and all updates current. On the one it shows MobileMe, on the other still shows .Mac. When I click on the .Mac I get the msg "The application System Preferences quit unexpectedly". I tried (six time and different days) using TimeMachine to Restore the OS--one time I get MobileMe but lose my iPhoto app and pics. To get iPhoto back I go back to .Mac. I don't understand why the updates worked on one machine and not the other. I can't Sync the two. Any ideas? Thanks.

Same problem, hours invested in this. Not sure Microsoft can catch up to Apple software, but Apple sure caught up to Microsoft in one, really bad, "upgrade" called MobileMe.
I have two Macs. Both OS 10.5.4 and all updates current. On the one it shows MobileMe, on the other still shows .Mac. When I click on the .Mac I get the msg "The application System Preferences quit unexpectedly". I tried (six time and different days) using TimeMachine to Restore the OS--one time I get MobileMe but lose my iPhoto app and pics. To get iPhoto back I go back to .Mac. I don't understand why the updates worked on one machine and not the other. I can't Sync the two. Any ideas? Thanks.

Similar Messages

HELP!! WRT54G2 works for one computer, but not for the other

I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

Risk terminator - Works in one system but not in the other

Hi
I have two SAP systems which is connected to one GRC system. Risk Terminator works well for the one system but does not work at all for the other.
I have done the necessary configuration, set-up the RFC connector, tested the connectors, tested the connections from the GRC system. All seems fine but when I create a role in PFCG risk terminator does not seem to be trigged at all in my one system.
Please advise
Regards
Mo

I would check the adapter for the other system and that the external program is maintained correctly along with all the settings in /VIRSA/ZRTCNFG

Help with form values being taken by one servlet but not by the other

Hi All,
I have 2 servlets one called the DataCollectServlet and the other the DBInsertServlet.
request.getParameter("fname"));
Works with the DataCollectServlet , but it doesnt work with the DBInsertServlet.
What could be the problem.It would be great if someone gives a detailed explaination.
Thanking you all in advance
AS

There is no parameter named fname in the request sent
to the DBInsertServlet.Hi,
Thanks for the reponse.I figured that the fname in DBInsertServlet
request.getParameter("fname")) , fname doesnt exist, silly me...
To address your question as to how the servlets are being called.....
There is .jsp page , which is like this.....
code:
<body>
<form action="./DBInsertServlet" method=post>
<input type="text" name="fname" value="<%=bean.getFirstname() %>" > </form>
</body>
But this doesnt seem to solve the purpose.....On the particular jsp page, the fields are displayed as "text fields", which can be edited/changed.
How do I prevent this particular thing.It would be great if you or someone sees this post and helps me.
Thanks in advance
AS

The inbuilt camera functions for one user, but not for the other. Where do I find the settings?

The inbuilt camera functions well with one user, but logging in to the other it says no camereas can be found. Where to I find the application to turn it on and of?
Best regards
Bjorn

For details of how to restore it, see [https://support.mozilla.com/kb/menu+bar+is+missing]

HitTestObject works for one mc but not for the other

Hi - I have given instance names to two movieclips for "bee" and "energy". When I sling the "ball" up and it hits the bee all the code executes but when I sling and hit the energy nothing happens. Thanks for any help.
function onMyEnterFrame(evt:Event):void
                              bee.x +=1;
                    if (bee.hitTestObject(energy))
                            trace("energy");
                            //beeHit=true;
                            energy.visible = false;
                            power.x = energy.x
                            power.y = energy.y
                            this.addChild(power);
                    if (bee.hitTestObject(ball) && beeHit==false)
                            trace("gotcha");
                            beeHit=true;
                            bee.visible = false;
                            pop_mc.x = bee.x
                            pop_mc.y = bee.y
                            this.addChild(pop_mc);

You might be experienciung some confusion with your names in the coding. I don't see anywhere where ball is checked for a hitTest with energy... the first conditional tests if bee hits energy, not ball.

Why do I get a "NullReferenceException was not handled by user code" error in one situation but not in the other?

We are using Sharepoint 2010 and Infopath 2010. In my form, I have a Managed Metadata field that I need to test for a Null value. I found, with the help of this forum's participatns, that a [field]_Changed event for one MMD field runs multiple
time because of the underlying XML elements (Terms, TermInfo, TermName, TermId). So I'm trying to figure out how to test the XML to see when the TermName has a value. By doing this, I hope to limit when the additional code in my form runs, i.e.
I'll only trigger it when TermName is not null.
Just to test for null/empty (before doing anything that calls the addtional code) when I run this code, it completes correctly but always shows a message box:
Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
But when I run this code, I get a "NullReferenceException was not handled by user code. Object reference not set to an instance of an object" at the "Dim strTest..." line:
   Dim strTest As String = Me.CreateNavigator.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName", Me.NamespaceManager).InnerXml
            If String.IsNullOrEmpty(strTest) Then
            Else
                MessageBox.Show("This is the value of the States InnerXML   " & strTest)
            End If
Can any one explain why drilling down like this gives me this error? And can you tell me how to get around it so I can limit how many times the code in my Infopath form needs to run?
Thanks in advance. Carol.

Never mind, I think I've got it figured out. When I do it this way, I get to the If Not...Nothing at the correct time. Thanks for sending me down the correct path, Scott. Carol.:
Dim
firstStr As
String =
String.Empty
Dim xNav
As XPathNavigator = MainDataSource.CreateNavigator()
Dim xFirst
As XPathNavigator = xNav.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns2:h2b59c4ae4144c01973b1d8571d217ad/pc:Terms/pc:TermInfo/pc:TermName",
Me.NamespaceManager)
If
Not xFirst
Is
Nothing
Then
Dim strxFirst
As
String = xFirst.InnerXml
                MessageBox.Show(
"Value of InnerXML   " & strxFirst)
Else
                MessageBox.Show(
"Empty or Null")
End
If

Audio chat works on one machine, but not on the other!

First up, my setup:
Comcast Cable Modem -> Linksys Router -> iMac (Core2Duo), PowerBook (G4), Vonage
Both systems running OS X 10.4.10. Both systems are connected through their Airport cards (ethernet cables are pulled) to the router.
To better debug the problem I turned the Firewall and LittleSnitch off on both systems.
The router's firewall is turned off as well.
Port forwarding is also checked, and the PowerBook is not even listed having any ports forwarded at all (that's the one iChat audio chat works).
There must be something blocking the iMac... but I can't seem to figure it out. Any help greatly appreciated!
Here the error message when trying to start a audio chat on the iMac:
Date/Time: 2007-10-03 21:53:13.057 -0700
OS Version: 10.4.10 (Build 8R2232)
Report Version: 4
iChat Connection Log:
AVChat started with ID 996873621.
blafusel13: State change from AVChatNoState to AVChatStateWaiting.
0x1763daf0: State change from AVChatNoState to AVChatStateInvited.
0x1763daf0: State change from AVChatStateInvited to AVChatStateConnecting.
blafusel13: State change from AVChatStateWaiting to AVChatStateConnecting.
0x1763daf0: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -22
blafusel13: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -22
Video Conference Error Report:
@:0 type=4 (00000000/0)
[VCBANDWIDTH_DETECTIONFAILURE]
[20]
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK21ebc40938e66ac3
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[BYE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK294ea2d35c1d2655
Max-Forwards: 70
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 BYE
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK6a2609544cbcf67a
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SUBSCRIBE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK063add5400ad6c74
Max-Forwards: 70
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 397
[v=0
o=vcauto2 0 0 IN IP4 u0en0.0
s=blafusel13
c=IN IP4 u0en0.0
b=AS:2147483647
t=0 0
a=hwi:1056:2:2000
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16384 RTP/AVP 12
a=rtcp:16385
a=rtpID:-66179448
m=video 16384 RTP/AVP 126
a=rtcp:16385
a=rtpmap:126 X-H264
a=RTCP:AUDIO 16385 VIDEO 16385
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=framerate:20
a=rtpID:0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 180 Ringing
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 100 Trying
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
To: "u0" <sip:[email protected]>
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
User-Agent: Viceroy 1.2
Content-Length: 0
Video Conference Support Report:
@SIP/Transport.c:1218 type=1 (00000000/0)
[NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK21ebc40938e66ac3
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK294ea2d35c1d2655
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 BYE
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK6a2609544cbcf67a
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 2 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: active;expires=3600
User-Agent: Viceroy 1.2
Content-Type: application/conference-info+xml
Content-Length: 186
<c-i v="0" st="f" en="sip:[email protected]">
c<h>i</h><m t="a"/>
c<h>o</h><m t="a"/>
</c-i>
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP u0en0.0;branch=z9hG4bK063add5400ad6c74
To: "blafusel13" <sip:[email protected]>;tag=950727899
From: "u0" <sip:[email protected]>;tag=999461336
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]>;isfocus
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK2f5118ef7b71533d
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=999461336
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 ACK
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK106e5ff018690da9
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "blafusel13" <sip:[email protected]>;tag=950727899
Call-ID: 90351360-7235-11dc-9ae6-fc6fa15013c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 479
v=0
o=cape 0 0 IN IP4 m.6
s=blafusel13
c=IN IP4 m.6
b=AS:2147483647
t=0 0
a=hwi:1056:2:2160
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 0 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1244757996
m=video 0 RTP/AVP 126 34
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:20
a=RTCP:AUDIO 0 VIDEO 0
a=pogo
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=rtpID:-1337831700
@:0 type=2 (00000000/22)
[VCAUDIO_OUTGOINGATTEMPT]
[2]

well, i updated the router (latest firmware is from april 2006!). rebooted the modem, then the router, restarted ichat. same problem unfortunately. however i found some geeky cool-aid on macosxhints. a shell script which configures the router to enable dmz, and another one to disable dmz. with a little shell script one should be able to enable dmz, start ichat. and upon quitting ichat disable dmz. not the best solution, but this will help me out...
thanks to tony for his help! (we should send him a fruit basket or something 8)
http://www.macosxhints.com/article.php?story=20051015142349372

My Nano is being recognized on one computer but not on the other?

I bought a Nano last October. Connected to my HP Pavilion ze5700 laptop. Everything was working well. Some thing went wrong with the screen couple of months ago. Send the Nano back and got a new one. Loaded the latest software. Plugged the new Nano. Hear the sound of plugging (ding!), but the new Nano isn’t being recognized! Other plug-ins (e.g.: flash card digital camera, etc.) are being recognized!
For the first time, loaded the latest software on a second laptop (Toshiba Satellite). Plugged the new Nano. Everything works. The new Nano is being recognized on the second laptop.
What do you suggest!
Thank you
HP Pavilion ze5700 Windows XP

Welcome to Apple Discussions!
Does the iPod nano show up as a harddrive in "My Computer?"
Either way, see this...
Your Windows PC doesn't recognize iPod
btabz

Export button rendering properly in one instance but not in the other

Hi
I have added a back button and an Export button in my custom OAF Report page's PageButton Bar region. The buttons are rendering properly in my DEV instance. When i deployed my code to TEST instance i found that the Export button is not rendering properly instead it is displaying like a button in a Visual Basic Application.
Can anyone point this out like Why this is happening ? Is it an instance issue ? If it is the case what am i supposed to do ?
Thanks,
Praveen

Hi,
without knowing anything about the implementation, just judging by the description you give, its hard to tell what's wrong. I suggest to compare the two instance in which it works and in which it doesn't work to tell the difference.
Frank

I lost the Google main screen when I upgraded my firefox on one computer, but not on the other one. How do I make google my default desktop when opening Firefox?

Used to have Google come up as the search box and main page when opening Firefox. Now I get an error message, or sometimes I get Inbox. How do I switch back to Google?

make http:/www.google.com your home page
* How to set the home page | How to | Firefox Help<br>https://support.mozilla.com/kb/How%20to%20set%20the%20home%20page

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

ITunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other.

iTunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other. Is the port faulty? Windows 7 PC

Could just be a loose connection or that the cable itself is going bad. There are a number of factors that could play into this scenario.
B-rock

HT4436 I have a laptop Mac and an IPad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the IPad, how can I set up the iCloud in both devises to do so?

I have a laptop Mac and an Ipad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the Ipad, how can I set up the iCloud in both devises to do so?

Welcome to the Apple Community.
Your best method would be to connect via USB and transfer that way, since videos are not transferred using photostream.
However you can stop photos on your mac being added to photostream in the iPhoto preferences > photostream by unchecking the automatic upload box.

Leave stuff on one device but remove from the other

Hello,
how do I remove music from my ipad 2 but leave it on my iphone 4s? Same question for apps and photos, what if I want to remove certain apps on one device but leave on the other? Does iTunes recognice each device as its own entity?

so will itunes remember which items I choose to sync or not sync depending on which device is plugged into the computer everytime I plug a device in?
Yes.
What if I only want certain songs on one and all songs on the other device, does itunes remember the checked songs or unchecked songs depending on which device is plugged into the computer?
Yes.
If you have a Mac, you can have multiple devices plugged in and syncing simultaneously. They'll be treated as independent devices (because that's what they are).
This is the way all Apple devices have worked right from the very first iPod over 10 years ago.

MobileMe on one Mac but not on the other

Similar Messages

Maybe you are looking for