Mode prio updation in /sapapo/curto_simu

Hi Xperts,
I have to update the mode priority of PDS , i hv tried some badis;
In ECC;
CUSLNTRTO_ADDIN-CHANGE_CIF_STRUCTURES
CUSLNTRTO_ADDIN-CHANGE_OPERATION
In APO;
/SAPAPO/CURTO_CREATE-CIF_IMPORT
/SAPAPO/CULLRTOEXPL-CHANGE_EXPL_RESULT
But not hitting any break point.
If any alternate method then plz advice.
Thanks & Regards,
Anoop Chandran

Hi Anoop Chandran,
Did you try transaction pds_maintain followed by
curto_create in ECC?
Regards
R. Senthil Mareeswaran.

Similar Messages

  • Iphone 6 plus struck in recovery mode after update to 8.1

    iphone 6 plus struck in recovery mode after update to 8.1
    i updated my iphone 6 plus to 8.1 from 8.0.1 and its struck in recovery mode.  inspite of restoring it again and again i get error 53.. im struck in the recovery loo. kindly help me..

    Hello arunmuthuvel,
    The article linked below details a whole host of information and a number of troubleshooting steps that can help get your iPhone restored.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/en-us/HT201210
    Cheers,
    Allen

  • How do i get my photos back, if I didn't back up my iPhone 5 and now its in recovery mode after updating to iOS 8.0.2?

    How do i get my photos back, if I didn't back up my iPhone 5 and now its in recovery mode after updating from iOS 8.0.1 to iOS 8.0.2?

    In you case, the only way is to use data recovery app to get back your lost photos, so the chance is uncertain. It depends on how smart the app it's. The good news is that most of the apps allow you to try them out. You can test them out by yourself. The steps are:
    Install data recovery app on your computer
    connect your iPhone and allow the app scan iphone
    display scanning result
    choose local folder to store recovered items
    You can choose to recover your photos from local disk, iTunes backup or icloud.  More details can be found out here.

  • Unable to check the PDS in transaction /sapapo/curto_simu

    Hello Experts,
    I am using BAPI 'BAPI_PDSSRVAPS_SAVEMULTI' to create the PDS, i can see the pds getting created in /sapapo/trprod and as well i am able to get the PDS details through 'BAPI_PDSSRVAPS_GETLIST',
    But using Transaction '/sapapo/curto_simu' i am unable to get any results for the product.
    don't know why?
    Thanks
    Surbhi

    Hi Gemini,
    In se37 transaction in the input field, i have entered the 'BAPI_QUOTATION_CREATEFROMDATA2' and clicked on the button ' DISPLAY',but in the status bar i am getting the messsage as 'PROCESSING CANCELLED'.
    I think in some transaction something has to be done,so that this can be viewd in SE£7 tcode.
    Regards,
    Xavier.P

  • I am Unable to restore my iPhone 4 which is in recorvery mode and update to iOS 5.0.1, it seems it is unable to prepare iPhone for restore??.... please help

    I am Unable to restore my iPhone 4 which is in recorvery mode and update to iOS 5.0.1, it seems it is unable to prepare iPhone for restore??.... please help

    See Here...
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • Help!!! iPhone in recovery mode after update!!

    My iPhone went into recovery mode after updating!!! It's telling me to restore but I'll loose everything ive been trying to transfer! I can't loose these photos. Please tell me there's a way to fix it???

    Once in Recovery mode, personal data is invariably lost.
    It is recommended that personal data should be backed up often.

  • HT4623 Stuck in recovery mode after update. What do I do?

    Stuck in recovery mode after update. What do I do? Tried holding both buttons and releasing after screen goes black. Returns to recovery screen.

    Hi there Rosie Bud,
    You may find the troubleshooting steps in the article below helpful.
    If you can't update or restore your iOS device
    https://support.apple.com/kb/ht1808
    -Griff W. 

  • My phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?

    my phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?

    Read this
    http://pathumf.blogspot.com/2011/11/how-to-reboot-stuck-iphone-iphone-4s.html

  • Fix iPhone 4S in recovery mode after updating from IOS5 to 6.1.3

    How do i get my iPhone 4S out of recovery mode without losing all my data? I am not very tech savvy and too scared to do anything without instruction. My phone went into recovery mode when updating from IOS5 to 6.1.3 (or whatever was the latest yesterday). Oh how I wish I hadn't. I think I want my IOS5 back!
    Can I use Google Maps on 6.1.3?

    Okay I have read that info but the iTunes sreens I am experiencing has different messages.
    1st = iTunes has dectected an iPhone in recovery mode. You must restore the iPhone before it can be used in iTunes.
    2nd = iPhone is in recovery mode. Restore
    3rd = Are you sure you want to restore the iPhone "iPhone" to its factory settings? All of your media and other data will be erased, and the newest version of iPhone software will be installed.
    iTunes will verify the restore with Apple. After this process is complete, you will have the option to restore your contacts, calendars, text messaes and other settings.
    .. now will my music, apps and photos be saved too? Here are the three messages.. you can see that the iTunes settings/screen configuation is not like those in the tutorial in the link. There is nothing in my "summary" and no restore to back up shown at this point. So I am wary to proceed.
    Thanks again to my helpers. Also I don't mind if the whole update was aborted.

  • My iPhone 4S is stuck in recovery mode during Update to 5.0.1

    As above, my iPhone 4S is stuck in recovery mode during Update to 5.0.1
    The itunes software just keeps cycling and trying to restore then restore failed, iPhone is stuck with the sync to iTunes symbols, and I don;t seem to be able to get it out of recovery mode.
    Almost wish Ihad my old HTC back ..
    Any one any ideas please?

    Hi there try restoring ur ifone using a different PC.
    i did face similar problem using my old ifone4. and no sooner did i try recovering using my office laptop.. it did work fine
    try it out

  • TS3694 Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore Unknoown error 12 pops up.iphone was not jailbroken. please help

    Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore 'Unknoown error 12' pops up each time.iphone was not jailbroken. please help

    From the article that your statement was posted from:
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

  • Wat is synchronous, asynchronous & local mode of update in BDC plz help

    wat is synchronous, asynchronous & local mode of update in BDC .
    plz explain each of them

    A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed( does not wait till the update in database is complete either it is successful or un successful). It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
    Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
    If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
    S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
    L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
    reward if it is helpful..
    sai ramesh.

  • Computer unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

    My computer is unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

    It's included in the iTunes installation bundle. Re-download and re-install iTunes on your PC.

  • Unable to view anything in landscape mode after update to 4.1.

    I recently noticed photos, safari, google, etc. will not switch to landscape mode after updating to iphone OS 4.1. Tried total reset of iPhone but problem still exists. Should I do a reset/restore?
    Thanks

    Is Orientation Lock on?
    <http://applelife.tv/2010/07/iphone-orientation-lock/>

  • Ipad 2 stuck in recovery mode after updating to IOS 5, Unknow error -1

    Hi Everyone,
    my Ipad 2 is stuck in recovery mode after updating to the latest IOS 5. Tried to restore, it comes up with unknown error -1.
    Ive tried all that I can including the tips given in the apple forums and internet. Please help.

    Hello soccerlime,
    Thanks for using Apple Support Communities.
    The error code "9006" in iTunes when updating or restoring your device indicates that access to the iTunes update servers is being blocked.  Please take a look at the information below to help resolve this error.
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Resolve iOS update and restore errors
    Take care,
    Alex H.

Maybe you are looking for

  • SSO to R/3 via ITS, working, but got a little doubt

    Hi ALL,     I was configuring SSO from EP6.0 to an ITS Server,which talks to backend SAP system. from what i know was that both EP and ITS and CRM should be in the same domain to work with SAP logon ticket.    in my scenario, I have EP and CRM in sam

  • Exception color with formula variable(replacement path)

    Hello, I tried to define exceptions in a query which "from" and "to" values are determined by formula variables with replacement path. I checked the values of the formula variables and they are right. <b>But <b>the cells are not colored</b></b>. When

  • I want to use Boot Camp to play PC games on my PowerMac G5.  Any Advice?

    I'm about to install Leopard & use Boot Camp for the first time to make a PC partition which will be used almost exclusively for PC gaming (mostly WWII shooters). I need some advice about how to go about maximizing my gaming experience. First, how bi

  • Error at opening FM9, even after uninstall/new download

    I've been using FM9 at work daily since it came out. I have not had any 9004 errors until yesterday morning. The error message displays and FM9 quits when the program is a few seconds into the opening process, when the Localization progress bar has m

  • Error with Illustrator CS5.1 Outline Stroke & Path Finder

    Hey all I've recently been trying CS5.5 on Windows 7 64-bit. I've been playing around with it and have found that whenever I try to outline a stroke of a filled object, the fill moves slightly. Also when using Pathfinder the same type of error occurs