Modem disconnects from net only when using iPad Mini

Hi, I'm using TP-Link TD-W8951ND Modem, When I connect my iPad mini to it and start browsing internet or watching videos the modem disconnects from net. This problem doesn't happen when I do the same with my Android phone or laptop. I have reset both iPad and modem without any luck. This is very frustrating for me. Kindly Help!

this is solved by me
ill take the solution with me since no one offered any help..
thanks for all the hard work from black berry online and phone support 

Similar Messages

  • Audio only when using iPad with Safari: can I view live streaming video via Safari?

    I only get audio on streaming broadcasts when I click on the AirPlay Icon in the progress bar? Can anyone help me get the video to display as well?

    Websites have to have content in compatible format AND also need to allow video streaming - if both conditions are not met then Airplay will often give sound only.
    If iPad 2 try turning on full mirroring (Home button twice, swipe all way to right, Airplay and set Mirroring slider to on).
    AC

  • [iPad Mini no Retina, iOS 7.0.4] Sound in only one side of earphone (no mic), but sound come from both sides when using FaceTime

    Recently, I found with iPad Mini w/o Retina, iOS 7.0.4, the sound comes only from left side of my earphone when listening music, watching YouTube videos, even playing system sound. But the sound come from both sides when using FaceTime.
    Earphone is not broken. Plug completely into the audio jack. This problem only shows up recently, worked fine weeks ago.
    Anyone has the same problem? Or has some solution on this issue?

    Settings>General>Accessibility>HEARING>Adjust the Left and Right Speaker with slider

  • I changed language from EN-GB to EN-US but my keyboard is still British (only when using FF). How can I change it to EN-US? in English

    I changed language (based on an answer in this forum) from EN-GB to EN-US but my keyboard is still British (only when using FF). How can I change it to EN-US?
    Should I just export my bookmarks, uninstall and reinstall the proper version? That may just be shorter than anything else.

    GREAT!. Thanks a lot for educating me. There seem to be a million things we have to learn about our computers and when we run into them the first time they seem insurmountable. You pointed me to the solution. Thanks again. Ben

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • Prompting for password and username only when using dynamic parameters

    Post Author: Co3023
    CA Forum: Crystal Reports
    How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

    Post Author: jehanzeb
    CA Forum: Crystal Reports
    I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
    Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
    Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
    why don't you embed the username and password in your application, it won't ask for username password then.

  • Get ORA-01031: insufficient privileges error, but only when using dbstart.

    I am getting ORA-01031: insufficient privileges error, but only when using dbstart. the listener starts but not the database. How come I can start it from SQL prompt but not from dbstart scripts as the oracle user?
    [oracle@mallard bin]$ ./dbstart
    Processing Database instance "gf44": log file /prod/oracle/10/startup.log
    [oracle@mallard bin]$
    Log file:
    Wed Aug 20 10:15:02 CDT 2008
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Aug 20 10:15:02 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> ERROR:
    ORA-01031: insufficient privileges
    SQL> ORA-01031: insufficient privileges
    SQL>
    /prod/oracle/10/bin/dbstart: Database instance "gf44" warm started.
    >
    oratab file:
    gf44:/prod/oracle/10:Y
    dbstart file section:
    # See if it is a V6 or V7 database
    VERSION=undef
    if [ -f $ORACLE_HOME/bin/sqldba ] ; then
    SQLDBA=svrmgrl
    VERSION=`$ORACLE_HOME/bin/sqldba command=exit | awk '
    /SQL\*DBA: (Release|Version)/ {split($3, V, ".") ;
          print V[1]}'`
    case $VERSION in
    "6") ;;
    *) VERSION="internal" ;;
    esac
    else
    if [ -f $ORACLE_HOME/bin/svrmgrl ] ; then
    SQLDBA=svrmgrl
    VERSION="internal"
    else
    SQLDBA="sqlplus /nolog"
    fi
    fi
    Permissions of file:
    [oracle@mallard bin]$ ls -la dbstart
    -rwxrwxr-x 1 oracle oinstall 10407 Aug 19 12:27 dbstart
    [oracle@mallard bin]$
    User permissions:
    [root@mallard 10]# id oracle
    uid=503(oracle) gid=503(oinstall) groups=503(oinstall),504(dba)
    [root@mallard 10]#
    I can start the listener manually using "./lsnrctl start" and start the database manually from sql prompt using "SQL>startup" (as sysdba) with no problems. this only happens when using dbstart file. I am logged in as oracle user and all environment variables are set
    Thank you for any help you could provide.

    I have the same problem, but i don't want insert this string
    Connect sys/{password} as sysdbaI have deployed an Oracle 10g with os SunOS
    $ uname -a
    SunOS DB02 5.10 Generic_141444-09 sun4v sparc SUNW,Sun-Blade-T6320
    I can connect with sys/password, but I can't login with
    $ sqlplus /nolog
    SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jan 7 15:19:50 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    SQL> connect / as sysdba
    ERROR:
    ORA-01031: insufficient privilegesthe the startup and dbshut don't work.
    Someone maybe help me?
    Thanks,
    Regards.
    Lain

  • Why can I not register my used iPad mini to my account? states still registered to previous owner, even when its not??

    I purchased a used ipad mini, still under warranty.  despite previous owner removing the device from his apple account, when I go to register the ipad mini to my account, apple states the device is still listed under previous owner.  Previous owner has gone into his account and the ipad mini has been removed?  what to do

    Contact the Apple suport number for your location from http://support.apple.com/kb/HE57 and ask for their help is getting this registration straightened out...you will probably need to be able to send them proof of purchase for the iPad Mini.

  • HOW TO DISCONNECT FROM THE INTERNET WHEN TRAVELING INTERNATIONAL

    HELLO EVERY ONE.I RECENTLY TRAVELED TO CANADA,WHEN I RETURNED BACK HOME I RECIEVED AN $1800 CELL PHONE BILL,$1000 OF THE BILL WAS INTERNET USAGE,I ADD AN INTERNATIONAL FEATURE BEFORE I LEFT BUT IT WAS LIMITED (HOW DO YOU CHECK HOW MUCH USAGE YOU HAVE USED WHILE BROWSING).SO I ASKED AT&T/A GUY IN THE APPLE STORE,BUT NO ONE REALLY KNOW HOW TO DISCONNECT FROM THE INTERNET AFTER USING IT,WHEN TRAVELING INTERNATIONAL.(MY TREO HAD AN OPTION THAT ASKED DO YOU WANT TO DISCONNECT FROM THE INTERNET)(THE IPHONE DON'T)

    If you have upgraded to version 1.1.1 or later there is a switch to disable cellular data while roaming. By default it is set to disable data. Settings/General/Network Data Roaming.
    You can monitor cellular data usage in Settings/Usage. Reset it just before traveling.

  • I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

    I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way.  I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

    Newer Reader versions are more strict than older versions (and other PDF viewers).  If certain minimum requirements are not met, Reader will tell you that the PDF is damaged.  This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
    You should contact the creator of these PDFs.

  • To run a report from command line, when using jdbc-odbc bridge

    Hi,
    How to run a report from command line, when using jdbc-odbc bridge?
    Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
    with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
    Please specify, what is command line arguments for jdbc-odbc bridge driver?
    Environment : Oracle 9i Report Builder on WinNT
    Database : Sybase
    Regards,
    Ramanan

    Hello Ramanan,
    Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
    JDBC PDS allows user to connect one or more same or different kind of databases.
    While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
    Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
    rwrun eg :
    rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
    Server eg :
    http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
    http :
    Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
    With Regards
    Reports Team

  • My up and down arrows as well as page up and page down no longer work properly only when using firefox. Page up and down function more like the "home" and "end" keys as do the arrow keys.

    Honestly I'm not sure if these began just after I updated FF to the current release, but it's been happening for at least 2 weeks. The arrow keys and page up and page down keys all work as if I'm pressing the 'home' and 'end' keys on my keyboard. This is only when using FF. Please contact me if you need more clarification. Thanks in advance!

    Sounds that you have switched on caret browsing.
    * http://kb.mozillazine.org/accessibility.browsewithcaret
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    * Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    * http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • How stop PS6 from removing the DPI value from an image when using "save for the web"?

    How stop PS6 from removing the DPI-value from an image when using "save for the web"?
    Example:
    - Open a tif image, that contains a dpi value (resolution).
    - Use the splice tool in PS6.
    - Export the slices with "Save for web", as gif-files.
    Then the dpi value is removed, the gif files has no dpi value (it's empty).
    How can we stop PS6 from removing the dpi value when using "save for web"?
    OR:
    When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

    you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

  • Hello, i am using ipad mini now. When i first receivedHello, i am using ipad mini now. When i charge it till 90%, it will stop charging on its own. I need to reconnect in order to charge it till 100%. Anyone know what is the problem? Thanks.

    Hello, i am using ipad mini now. When i charge it till 90%, it will stop charging on its own. I need to reconnect in order to charge it till 100%. Another problem is when i am using an apps, for example looking through the photo, suddenly the screen will back to Home. Anyone know what is the problem? Thanks.

    This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
    Unfortunately no one here can access your support history. You must respond to the emails directly.

  • Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag). Also Premiere Pro CS5, playback is almost like watching footage in slow motion.

      Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
       Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
      I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
    Any help would be great, Thanks
    Darius

      Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
       Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
      I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
    Any help would be great, Thanks
    Darius

Maybe you are looking for