Modify SAP standard screen

Hi,
I want to add one column to sap standard screen , could anybody please let me know how to do. This requirement is for EH&S module and T.code is /N/TDAG/CPM00.
Program name - SAPLSO33
Screen - 2300
Thanks & Regards,
Ravindra Reddy.

Hi,
Get the package from the program->go to SMOD t code and find out any proper screen exit for tht program exist.
THanks,
Anmol.

Similar Messages

To modify the sap standards screens for f-02

Hi,
I want to modify the sap standards screen in T.ode F-02.
it is very very urgent.
Regards,
Raju.

HI,
in f-02 screen, press editing option than you can change the fields what ever you want.
for example if you dont want currency/rate in this place u want amount in local currency you can select document only in local currency and save.like that u have to change what ever you want.
thanks
sai krishna vallurupalli

Modify the standard screen of a report

I've just created a report with some parameters and when i try to modify the standard screen of this report via se80 i've got a warning message that tells me that all changes in standard selection dynpro will be discarded.
Does that mean i can't modify this Dynpro?
Thanks

Hi jose,
Wat is ur problem can u explain me clearly. wat u r trying to modify?? Ru trying to change screen settings??
For dynpro check this link
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm
Regards,
Pavan<a href="http://http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm">http://http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm</a>

Where-Used List: Modifying SAP standard function module

Hi,
We have decided to modify SAP standard function module SD_SCHEDULING. But before that, we need to understand what impact this modification will have in the system. We will also estimate the risks with this modification.
Therefore, I have taken Where-Used List for this function module. We are aware that this list is not comprehensive.
Do you know any other way we could use to understand better what impacts this kind of modification may have? My colleagues say that this is the only way.
Thanks in advance for your help.
Regards,
Jarmo Tuominen

Hi Jarmo,
Try this
1). Goto Se16 and check the contents of table 'CROSS'.
2). Enter 'F' in the first selection screen field
3). In the NAME field enter the Function module SD_SCHEDULING and execute.
4). The list will give you where all the FM has been used.
Kindly note this is almost the same as doing a where used list. The where used list will only work correctly if the 'Update Navigation Index' works correctly in your system. So just to ensure the result of your where used list you can follow the above steps. This does not require the Update Navigation Index.
Hope this helps
Cheers
VJ

How to edit the attributes of a SAP standard screen?

hello all,
i would like to ask if it is possible to edit the attributes (particularly the language) of a SAP standard screen without using any access key? if yes, how would i be able to apply the changes?
thanks!
- annalyn

Hi,
Screen attributes are stored in table D020S. You can update this table using ABAP code. The language is stored in field SPRA of this table. The texts appearing on the screen are in D020T.
It is likely you will not be allowed aa data modification statement (INSERT/UPDATE...) on these tables if you are on newer versions of SAP (46/47...). You can bypass that by using native SQL and some other workaround (which might be another thread here).
It is most strongly recommended to not modify SAP standard objects, and specially not without an object key. However, if you are working on something like a miniSAP and want to play around with it, the method mentioned above shall do.
Hope this helps,
cheers,
Ajay

Best practice when modifying SAP Standard Development Component

Hello Experts,
What is best practice when modifying SAP Standard Development Component (Java Web Dynpro)? Iu2019m looking for the best method to do modifications to SAP Standard DC so that my changes will be kept (or need low maintenance) after a new service package (or EHP) is applied.
Thanks,
Kevin

Hi,
'How to use Busiess Packages in Enterprise Portal 6.0' is available in this link.
http://help.sap.com/bp_epv260/EP_EN/documentation/How-to_Guides/misc/Using_Business_Packages.pdf
Check out for the best practices.
Regards,
Harini S

What are the methods to modify SAP standard tables?

hi
what are the methods to modify SAP standard tables?

.APPEND structures AND CUSTOMIZING INCLUDES.
these are the two methods.. but customizing includes we, as a developers do not use.
generally we use .APPEND structures to modify standard tables.
note that we need an access key to modify atandard tables.
we can create an apend structure and add that structure to the standard table at the end.
note that .append structures should only be added only at the end.
that is the reason we use .append structures to modify standard tables.as we should not include a field in the middle and disturb the original order of the standard table fields as it may effect many objects depending on the standard table.
but Some standard tables for which there is a LONG datatype field can never be modified.
the reason is the LONG datatype field should always be there at the end and also .APPEND strutures should always be there at the end. there will be a conflict. so, some standard tables can not be appended.

Set search help dynamically to SAP Standard Screen

Hi,
I have one issue where I have to Create f4 help For a field present on SAP standard screen.
Please advice how to do that.
Can i dynamically set Search help in any screen-exit of the standard screen?
Please help.
Screen No is 130
and Program is SAPLQM03.
Here I want to attach a Zsearch help to a standard FIELD RQM01-LS_KDPOS.
Thanks,
Ishani

Hi Ishani,
The field that you mentioned here in structure RQM01 is having a check table VBUP. So if some values are there in that table, then that will appear as F4 help to you. Consult with your functional and check how values are coming to this table VBUP. Othertahn this, I am afraid you will not be able attach any help.
Regards,
Abijith

Step by Step procedue to modify SAP standard ESS screens

Hi all,
I am new to Enterprise portal..
I have a requirement to modify the SAP Standard ESS screens, basically to add some new fields into it. I have the NWDI configured in the system. Can some explain me the step by step procedure to bring the source code into NWDS?
Regards,
Bharath Mohan B

Hi
Complete Custom like ESS development
SDN Day session in Las Vegas: Custom development of Web Dynpro ESS applications using Floor Plan Manager
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&
Re: Steps for ESS MSS installation,Configuration
Go to above links step by step
Or you can search in SDN accrding to ur requiremt.
Regards
_SS

Adding a custom field in a sap standard screen in pa30 for an infotype.

Hi to all..
i'm in a requirement to add a custom field in a standard screen of pa30. for the infotype 0442.
I googled up.. but i was not getting proper solution for it.. can any one provide a solution for it..
With regards.
Aahbha.

Hello Sirs,
Step by step instructions on:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4f/d52552575e11d189270000e8322f96/frameset.htm
The below thread provide more info on how to create an infotype from scratch, but this is just for the reference:
add custom fields to standard infotype
Regards,
Bentow.

Modify SAP standard fields in an Infotype

Hi friends!
We have enhanced an Infotype successfully added few extra fields and they work perfectly.
In Infotype 28, there are already 3 SAP standard fields and we have added 4 more.
Now, we need to enable/disable according to the our added fields. For Eg by a Custom check box, I need to enable/disable SAP standard field for an infotype.
We tried by LOOP at SCREEN and all but due to SAP standard fields we are unable to do it.
Any ideas?
Please help.
Thanks.

Hi Park,
Standard Infotype Fields configured (enable/disabled/hidden) in the view V_T588M (Tcode-SM30). You can disable any standard infotype field here if it is independent of other fields (i.e. before screen opens itself field is disabled).
If you want the field to be disable at runtime you may need to edit the feature 'PNNNN' (where NNNN is your standard infotype number (transaction -pe03)).
Also have you tried to code (loop at screen. endloop) in badi HRPAD00INFTY (method BEFORE_OUTPUT). I am not sure whether this will work or not.
Regards,
Shrinivas

Adding custom fields on SAP standard screen

Hi,
I have to add some custom fields in the SAP defined standard screen. When I go to that particular screen and try to change it to 'CHANGE' mode , it asks for Access Key. Please suggest me, how to add the custom fields.
RGDs,
Gsaasg

Hi,
For this only there are enhancements, Just search for screen exits in the SDN or google for
your transaction and also search for BADI's.
Regards and Best wishes.

About modifying sap standard workflow

hi, i would like to modify a sap standard workflow. In the real project, how do you modify it. Copy this workflow and create a custom one , or generate a new version and then modify it?

>
jrockman li wrote:
> Hi Martin Nooteboom, thanks for your reply. i still have one question, if we create new copy of sap standard workflow. Then, the event will trigger both workflows. So, should we deactivate the standard workflow? and ,in this case , what should we pay attention to when transporting workflows and linkages.
No you don't deactivate the workflow, but the event linkage. This should result only starting your workflow when the event is raised, also after transport. You can check the eventlinkage after the transports.
Regards,
Martin

Modifying SAP standard help menu

I've been asked if it is possible to modify the SAP standard help menu, so that the user could potentailly click on a like that would call some custom documentation. Is this possible? And if not could it be done via a transaction - and how do you go about saving a word docuemtn somewhere that a SAP transaction could call it?

Look For Search Help Exit in the web.
[Lik1|http://wiki.sdn.sap.com/wiki/display/Snippets/CaseInsensitiveSearchHelpExitforMaterial+Group]
[Link2|http://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits]
Regards
Abhinab Mishra

SAP Standard screen modification and logic

Hi All,
I have four tab strips in my standard selection screen. in the second , third and fourth tabs i need to add same fileds
for exampls
surgery tab
optable                    procudere code          procudure category (standard functionality)
opttable2                 procudure code2        procudure category2(custom to be added)
opttable 3                procudure code3       procudure category3(custom to be added)
medical dat tab
diagnosis code(standard)
diagnosis code2(custom to be added)
diagnosis code3(custom to be added)
The standard program uses one structure (RNEBILL) in the structure i have added APPEND STRUCTURE(ZPPAND1)
in the structure i created all the fields.
could you tell us how to proceed futher development logic.
Regards
subbara

Hi Subba,
Still it appears hazy to me. But if i have understood it correctly, this is how it looks like:
Your mentioning of a Standard SAP Form with four Tabs gives me a hint that it could be any Marketing Document Form (For eg. Sales Documents or Purchase Documents). Then you mention that you are not adding any User Fields to the first Tab (The first tab in any Marketing Document is the Contents tab). Again, you mentioned that you have added 3 user defined fields in your second tab which is the Logistics tab and then your requirement, you want this to manged by the SAP Form just like any other standard field on the Form.
If this is what i have understood then the solution is simple. You just need to databind your custom field to the user defined field that you have created in the database. SAP Business One will process these custom fields just like any standard field.
Thanks and HTH,
BR,
Siju Dasan

Modify SAP standard screen

Similar Messages

Maybe you are looking for