Monitor Changes in PRD System

Hi,
Is there any transaction Code to monitor the changes (a log file kind of thing) that were made to the objects in the production system on day to day basis ?
If there is no such transaction code is there any other way to trace the changes any work around ?
Regards
Ellora

Hi,
Thanks Kapadia for your response.SLG1 is for analysing application log but my requirement is to monitor the changes occured to the objects say Info objects,Infopackage,Queries,Templates and so on with user name and nature of change.Is there any way to trace these changes ?
Regards
Ellora.

Similar Messages

User making direct changes to PRD system

My enviroment is ERP 6 ABAP /Oracle 10G/Solaris 10
Some of my superusers are fond of making direct changes to PRD (as opposed to DEV & then transport via the landscape) though changes in PRD system have been restricted through client change options SCC4 & system change option SE06
I suspect the said users have ROLE with powerful authorizations that they ought not to have.
Kindy advice what I should look for the users roles or how I can go about to harden PRD system aganist direct changes
Thanks
Edited by: Andale J on Sep 29, 2010 12:10 PM

Hi BAIGSA
Creation of roles is down to the security policy already in place unless you are lucky enough to be in at the beginning and can define how all roles are to be built in future.
Mostly, you arrive at a client's site and have to adapt to their authorisation concept.
You may find that function (module based) roles are inplace or that job roles (either multiple singles assigned directly or via composites or a one role does all) has been set up.
Remediation of module based roles can be a really pain if they were built with too many transactions included - user group/job roles are far easier to remediate but this depends on the policies in place - inactive objects etc)
I haven't enough information to understand what the changes are that have been made in prod to help - you need to review those changes and formulate a strategy which the business agrees to to resolve.
Kind regards
David
Edited by: David Berry on Oct 3, 2010 8:30 PM

Monitoring RFCs on Remote Systems

Hi,
I am attempting to convert our CCMS monitoring to a central instance on solman. One of the things we monitor in the PRD system is availability of two RFC destinations.
I am unable to figure out how these can be monitored from solution manager as a central system. When I set these up in solman under availability monitoring, it appears that solman is expecting these RFC destinations to be local to solman, rather than on the PRD system.
How can I get solman to monitor the RFC on PRD? It does not appear that the RFC availability monitoring method allows you to specify which system the RFC resides on.
Thanks much,
Chris.

Hi,
ok I will try to explain how get to see the MTE's of ur PRD system.
1.   TA: RZ20
2.   change in maintenance mode (Extras -> Activate Maintenance Mode)
3.   now u r able to create a new monitor set. So please do this by clicking on the create button.
3.2 place a describing name and select who should be able to see this set. Click OK and now u will see ur new own monitor set
4.   Click one time on that set and click one more time on the create button. Now u will get an list with all monitored Systems, that are connected to the solution Manager. Search in the PRD System the MTE u like to see and save ur new monitor with an discribing name.
5. Hopefully if I'm forgottin' nothin u will see after save and activate ur objects from the managed System in the CEN System.
So if anything is missing feel fre and contact me ...
br Lars

Track the changes to the batch jobs in the PRD system.

Hello Basis Guru's,
Need your help in a Query. --> Is there any best practice that can be implemented to trace all the changes done to batch jobs in the past 3 months and going forward. Be it in its scheduling or its variant changes etc, i would like to track the changes to the batch jobs in the PRD system.
Any pointers would be really helpful.
Thanks in advance.
Rgds,
Sri

Hello Raghu,
Third party tools can only help you but not SAP. . A lot of us may think that for example if a Job 'X' runs daily then SAP considers this job as a single object.However actually SAP will treat each run of a job seperately infact as seperate jobs. If you would have noticed each job in SAP has a job id which is unique. So actually each run is unique. Now change logs can exist for only those objects that get changed. But change logs can not exist for objects that are newly created everytime !!
If you would have noticed you can two jobs with the name A but running two different reports/variants whatver. This is because job name is not that important it is the job id.
Every time a job runs a new entry gets stored in TBTCO,TBTCP etc.. tables. It is not that the existing entires are updated.However yes when a job is scheduled periodically there is some kind of a link that is created in the job series but it does not showo up in any of the tables!!
As far as 3rd party tool is concerned I can name a tool like UC4. UC4 has its own database in which the job name will always be unique. For that you can easily find change logs. I think Chronicle (Redwood Scheduler) also supports this.
Regards.
Ruchit.

Sys Monitoring:Only PRD System can be seen in Monitoring Graphic

Hi All,
I configured Solution -> Assigned Logical Component to it -> which contains all the 3 systems of our landscape.
But in Monitoring Graphic I see only PRD. Why?
RFCs are working fine.

Hi,
per default, only the systems of the "leading system role" are activated for monitoring. Via the "System Group" tab on the root node of the solution, it is possible to activate additional systems. Select the system in the table and press button "Insert <-> Remove Product System".
Best regards,
Michael

Change program on prd system

I want do NOT allow a sap user to change / create ABAP programs on PRD system, without taking his sscr key. How do I do?

Thanks for your help.
I looked in scc4 and found the following configuration:
Change and transports for client-specific objects:
                        "automatic recording of changes"
Cross-client changes:
                       "No changes to cross-client Customizing objects"
Protection: client copier and comparation tool:
                       "protection level 0"
catt and ecatt restrictions:
                      "ecatt and catt not allowed"
I want to do the following configuration:
Change and transports for client-specific objects:
                      no changes allowed
Cross-client changes:
                     no changes to repositoru and cross-lient customizing obj
Protection: client copier and comparation tool:
                    protection level1 : No overwriting
catt and ecatt restrictions:
                   eCATT and CATT not allowed
Do you think that would solve the problem that if I do this configuration ?
You think other problems occur if this configuration would make?
Thanks for help

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

Same SID for QA & Prd systems - pros and cons?

We have the foll systems:
1. Enterprise Portal 7.0
2. NWDI 7.0
3. NW 7.0 (with XECO - Ecommerce)
4. TREX 7.1
5. Content Server 6.40
6. ECC 6.0
Currently the QA and Prd systems have the same SID and system/instance no, although they are on different hosts.
We would like to know what are the long term pros and cons for keeping the QA and Prd SIDs the same for all systems.
We are already making a list, so thought we might as well get more inputs from the community too.
We already have this arrangement for the past 3 months and have not faced any major issues.
A couple of cons though:
1. Cannot use solman as it cannot distinguish between the diff servers with same SID
2. ABAP transports from QA to Prd have to be manually done (cannot use STMS)
Thanks
Prasad

Hi Manoj,
Changing the SID of java systems is a very tedious procedure. Hom sys copy is just a part of the SID change...there are a whole lot of configs to be done after that...the task is eq to a new setup of systems
For once, the efforts put in are huge..you can see there are 5 systems..besides, it will involve coordination from all teams - basis, development, functional, project management.
Here are a few advantages that we know of:
1. No efforts reqd to change back to original SID
2. During disaster recovery, we just have to restore the production database on QA and change the hostname, whereas its not so in case of having diff SIDs
3. For end-users this will be transparent because they will be using the hostname in the URL which is anyways different
We have the same SIDs for the past 3 months and have not seen major issues, but we also would like to know from the long term perspective if there are any risks that we have not foreseen...hence we seek help from the community.
Hope its clear now
Thanks for your response
Prasad

ChaRM transport route, one development, 2 QA, 2 PRD system landscape

Hello,
We have a customer who has an ERP system with a transport route which is the following:
One single Development system which feeds, 2 QA systems and then 2 PRD systems.
We are to implement ChaRM and we want to customize the tickets so that every time you execute the import action of a transport request into QA (and later into PRD) both systems QA1 and QA2 are updated and later on with PR1 and PR2.
We would like to know how to support this scenario in Solution Manager using ChaRM. How do we set up the logical component at SAP, how we define the transport route and layers, and how we define the actions in the SDHF ticket.
I appreciate your help.
Regards
Esteban

Hello,
We set up a testing environment for change request management. In a solution manager we created five clients. One single development which feeds two quality systems, and final two production system. As it was said in the thread we used transport groups in the transport route. The development system feeds this transport group which feed to import queus in quality systems. We tested this transport route and transports worked well and arrives into both production 1 and production 2 systems.
Then created a logical component for that landscape, with five sytems. Then we created a maintenance project using that logical component. We created a maintenance cycle and then a task list was created which shows two delivery system, and the two productive systems. All the groups have the right actions.
However when we created a SDHF correction the system creates the task list only for 3 systems, not for the five of them.
we see that only action groups are created for development, quality 1, and production 1. No entries for quality 2 and production 2
We try to run the action which is in the general part of the task list to execute the import in multiple systems, it cames out with the correct selection of importing in quality 2 system because it is the transport group. However an error is raised saying that the actions for quality 2 are not there in the task list which is true. Finally, as short term solution, we were able to import into quality 2 and later on pr1 but done manually in the stms transactions which is not what we want to do.
Regards
Esteban Hartzstein
Edited by: Esteban Hartzstein on Aug 24, 2010 2:06 AM
Edited by: Esteban Hartzstein on Aug 24, 2010 2:07 AM

PI 7.1 CTS+ - Manually deleted object in PRD system

Hello,
We have PI 7.1 with CTS+ configured. However, there was a condition that an object was deleted manually in PRD system not via CTS+. After this all the transports that were connected to that object and transported to PRD system were imported successfully but ! the changes weren't set in PRD. That means, the CHR transported to PRD but the changes are not applied.
Any idea how t solve this problem ?
Please advice,
Dimitry

Hi Dimitry,
please check if the XI object you're trying to import have a lower version in PRD than in DEV/QAS.
In the opposite way if the XI object has a more recent version in PRD you'll not be able to update the object, since for the sistem the version you're trying to import is an old one.
Hope this help
Best Regards,
Francesco

Performance configuration PRD system SCM 5.1 Solaris 10

Hi!
I am trying to configure some performance parameters on a PRD system that is running under a Solaris 10 machine. This system have 40CPU and 40GB RAM. SAP system = SAP SCM 5.10
I have given the sap system 15 GB and Oracle 20GB and OS = 5GB
I am not sure which SAP instance parameters that I should change.
The system has for the moment mostly default instance parameters values becuse it is newly installed, the only parameters that I have changed is:
em/initial_size_mb = 15GB
PHYS_MEMSIZE = 4096
Wp Dialog = 50
Wp btc = 15
wp eng = 1
wp vb = 6
wp vb 1 = 2
wp sp = 4
I have read about ZERO MM but I have not found anything for UNIX/SOLARIS and I cannot find the parameter
"es/implementation " . IS it a default value in the SAP Kernel , and can you use ZERO MM for UNIX?
OK, to my question which instance parameters should I change ? Or should I have the default values and change afterwards?
Thx for the Help
S.T

Yes, it seems that you have right about the CPU specification.
THis is the utput from /usr/sbin/psrinfo -v :
Status of virtual processor 8 as of: 07/17/2009 11:27:58
on-line since 05/19/2009 18:01:10.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 9 as of: 07/17/2009 11:27:58
on-line since 05/19/2009 18:01:12.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 10 as of: 07/17/2009 11:27:58
on-line since 05/19/2009 18:01:12.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 11 as of: 07/17/2009 11:27:58
on-line since 05/19/2009 18:01:12.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 12 as of: 07/17/2009 11:27:58
on-line since 05/19/2009 18:01:12.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 13 as of: 07/17/2009 11:27:58
on-line since 05/19/2009 18:01:12.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 14 as of: 07/17/2009 11:27:58
on-line since 05/19/2009 18:01:12.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 15 as of: 07/17/2009 11:27:58
on-line since 05/19/2009 18:01:12.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 56 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 09:54:50.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 57 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 09:54:50.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 58 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 09:54:50.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 59 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 09:54:50.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 60 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 09:54:50.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 61 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 09:54:50.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 62 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 09:54:50.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 63 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 09:54:50.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 88 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:13:56.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 89 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:13:56.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 90 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:13:56.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 91 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:13:56.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 92 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:13:57.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 93 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:13:57.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 94 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:13:57.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 95 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:13:57.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 112 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:16:47.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 113 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:16:48.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 114 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:16:48.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 115 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:16:48.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 116 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:16:48.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 117 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:16:48.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 118 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:16:48.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 119 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:16:48.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 144 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:22:14.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 145 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:22:14.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 146 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:22:14.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 147 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:22:14.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 148 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:22:14.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 149 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:22:14.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 150 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:22:14.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
Status of virtual processor 151 as of: 07/17/2009 11:27:58
on-line since 07/16/2009 10:22:14.
The sparcv9 processor operates at 2400 MHz,
        and has a sparcv9 floating point processor.
THX again for the help
Total = 40 CPU
Edited by: Stefan Törnqvist on Jul 17, 2009 11:46 AM
Edited by: Stefan Törnqvist on Jul 17, 2009 11:48 AM

Code changes in Production system.

Hi all,
Due to the unavailability of the development and quality i want make code changes in production system.
Please tell me is this possible and also i want know that does it effect or not?
Regards,
Ramprasd

Hi,
For editing in PRD system, u need to get authorization for editing. To get auth object, contact basis.
But proper way to edit a code is modifying in DEV, then transport it to QAS & PRD.
Regards,
Prem

Different Recipients of Alerts in DEV and PRD Systems.

Dear All
I wanted to know if it is possible to configure different set of recipients for an alert category in XI DEV and XI PRD systems.
For example i have two groups "Group A" and "Group B" which should recieve alert mails.For this ,
we can create 2 different roles in XI DEV i.e. "Role_A" and "Role_B" and assign user id's to these roles and then assign these roles to Alert Category using the "Recipients Via User Roles" option .This is done in XI DEV system.
My question is it possible that alert mails are just sent to "Role_B" in the XI PRD system. (not to ROLE_A). As ideally we would be transporting the alert categories from DEV> QAS> PRD can we have different recipients configurations in DEV and PRD.
Please suggest.
regards
Nilesh.

Hi Nilesh,
Yes it is possible, Just change the receipent of alert category on PRD system (you can change receipent anytime you want).
Regards,
Gourav
reward points if it helps you

Wage type characteristics variation in Dev and PRD system

Hi All,
We have a wage type for ex: 9501, We will be entering the WT in infotype 15 and the in the payslip it will be in payments section.
When I enter value 50 in DEV system, it is showing 50 in payslip under payments section but in PRD system the same scenario reacts as 46.53 in the payslip when we enter 50 in infotype 15. Not sure why it is behaving in such a way, any ideas?
With Regards,
Giriesh M

Hi Sikindar,
Thank you for the respond. I have checked where it get changed and it was happening in GVAL. Later I find out that it is based on /801 splits ( it has 2 splits and based on the first record it was producing such result). As I am new to functional side it is bit struggle to know from where I have to analyse. Your suggestions helped me to find out. Thanks a lot.
With Regards,
Giriesh M

Does two seperate client required if the solman monitors DEV and QAS system

Hi All,
This is our client landscape:
1 Dev-SolMan->For all development and quality systems(ECC 6.0, BI and EP).
1 PRD-SolMan->For all production systems(ECC 6.0, BI and EP).
Note: We have build only DEV-SolMan system as of now and we haven't done any configuration yet like either service desk or ChaRm.
The question is:
Do we need to have two seperate clients in DEV-Solman, one for all development systems and one for all quality systems? or Can we have a single client in DEV-Solman to handle all development and quality systems? What is the SAP recommented approach?
Thanks
Sanjai

Hi,
you even don't need separate Solution Manager systems to monitor DEV / QA and Prod. You could use one SolMan client to monitor and administrate all systems / clients.
Maybe it would be a good idea to create different Solution Landscapes, but this depends on your need.
Separate clients are no good option, because CHARM can only activated in on client. Also if you plan to activate charm, you need a solution that contains all systems in your transport landscape (DEV, QAnad Prod).
Kind Regards,
Holger

Monitor Changes in PRD System

Similar Messages

Maybe you are looking for