Monitor goes into sleep mode and will not wake up

My monitor goes to sleep and will not wake up.  I try powering off and that will not respond.  I have to unplug the workstation and start back up.  I have turn off sleep to never sleep and now it just goes to sleep when Im working. 

Hello @rosendahl14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter 
reference: http://superuser.com/questions/669571/windows-8-1-​64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Computer went into sleep mode and will not wake up!

    I have a HP Pavilion a350n which I love and have never had a problem with it.....until now.
    When I turn it on I get a black screen with a small window that reads "Warning" "PC entering power saving mode"  Then the screen goes blank and the blue power light on the monitor turns an amber color.  The only way I can turn off the computer is with the blue power button on the front of the tower.
    Every "fix" I have come across says to do a System Restore from the Start Menu....How do you get to the start menu when you can't wake up the computer!
    I have tried disconnecting the main power cord from the outlet and reconnecting it and turning the computer back on.  Nothing but the same "Warning....."
    I tied hitting the F1 button at turning on the unit and nothing......
    I checked the monitor connection at the rear of the computer and can't see any bent or broken pins.  Cord looks great too.
    I took the back off and was going to try and unseat the memory card and reseat it again, but I don't know much about the inside of a computer and am not sure where the memory card is or what the hec it even looks like!
    Thanks for any help!

    First try another monitor. What type and model of monitor do you have now?
    If the computer turns off also, it could be shutting down due to hardware issues. Open the case and clean out the dust and then pull the video card and memory and reseat them. Then try to boot up.

  • I have a macbook air that is not connecting to the internet correctly.  I've had it connected for three weeks, it went into sleep mode, and will not reconnect.  It will connect to other wireless routers (I've tested it) but not the one at my apartment.

    The problem is not happening with any other device that I have.  My iPad, iPhone and another laptop all connect fine.  In fact, it's not even the connection.  The computer will connect to the net.  It just will not open any page.  It starts to open and then hangs and hangs.  It will not move.  Weird since it worked great for three weeks and then all of the sudden, nothing.  Click on Safari and I have short hope that it will move and NOTHING!  Any thoughts why it would hang up like this and only with this specific network? 

    This is a known Lion issue, hopefully solved in 10.7.3. But may not be solved immediatly after updating, that was my case.
    To make it work i followed those steps.
    1.- Restart
    2.- Lion 10.7.2 Update
    3.- Uninstall netwokrs
    4.- Shut down
    5.- SMC reset
    6.- Reinstall networks
    I dont know whether all the above steps are necessary, but for me the update didn't work properly before SMC reset. (I am running a MBA mid2011)
    Hope it helps,
    Cheers

  • Macbook spontaneously goes into sleep mode and screen off mode

    Hi. My Macbook spontaneously goes into sleep mode and screen off mode with varying time between each instance. It usually goes for a few minutes or even hours without doing it and then will go through periods of fluctuation between the modes. I believe this to have started with a minor orange juice accident rather than it being anything software related.
    Any ideas as to how I might rectify the problem? Thanks very much in advance,
    Danny

    When you say it goes into sleep mode ...do you mean you actually see the white pulsing light?
    It may be that there is an application running (perhaps in the background) that is keeping your book awake. Printer software sometimes does this for example ...try logging out and seeing if it sleeps like that. If it does, then it very well may be a background process running.
    You may find some items in System Preferences/Accounts/Login Items that may be the culprit.

  • HP 2309v Monitor goes into sleep mode

    My monitor an computer have been working fine for three months (since i bought a new computer Packard Bell)  all of a sudden my monitor stopped working correctly. It now says VGA : no signal and gives recommended settings - then goes into sleep mode.  All cables are plugged in correctly, i have restarted the computer countless times (even taken it apart and removed the RAM as suggested on another post).  To no avail.  Please help.

    Hello SEAN1982,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having issues with your computer display not working. Given your statement that you have tried plugging it into two TV's I am assuming it does not work on them either. This would indicate the problem resides on the computer itself. I am recommending that you review and follow the HP Support document: Windows 8 Safe Mode, which should enable you to boot. If you are able to boot into Safe Mode and see the computer again follow the steps set out in the HP Support document: Using Microsoft System Restore (Windows 8), which will walk you through restoring your computer back to before this became an issue.
    ***NOTE: Do not worry about the documents being Windows 8 and not Windows 8.1 the steps are the same.
    If you cannot boot into Safe Mode the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • RBDAPP01 going into SLEEP Mode and Idocs still in 64 status

    Hey all,
          I have a Inbound Idoc interface which is being processed using RBDAPP01 Program. The Issue I am facing is that the job running the rbdapp01 program goes into sleep mode even though there are idocs present in 64 status. I tried to debug the work process using SM66 but it does not open any debugging window although it says debugging started. If I cancel the Job and run it again it processes those Idocs Any input on how one can resolve this issue?
    Thanks.

    Hi Aparna,
    Here is extract from SAP material on running RBDAPP01 transaction and possible reasons for delay in processing. HOpe this can help you.
    To automate the treatment of IDocs, you must run the ABAP program RBDAPP01 (transaction BD20) in job. This program has a very good option for parallel processing which can reduce a lot the time required for treatment. However use it carefully and make sure you set a packetsize high enough to avoid that your SAP system be overwhelm by demands for available dialog tasks (don't forget one dialog task is monopolized per IDocs packed to treat).
    Best Regards,
    Krishna

  • 24" imac goes into sleep mode and lights on circuit flicker

    Hi -
      I have a 24" imac and have found that when the display goes into sleep mode the lights on the circuit flicker.
      I have searched the web and other users have complained of the same issue with no resolution.  
      Here is a similiar post - https://discussions.apple.com/thread/2606099?start=0&tstart=0.      The resolution is probably you need to get the iMac serviced,  what i'm wondering is what is the problem in the imac that is causing the issue.    Is this a defect?
      Before anyone questions the circuitry in my house here is what I have verified.
      An electrician has come and verified the electric panel is good and all circuit breakers are good.   All circuits in my house are copper, no aluminum.
      I can plug the iMac into any circuit and the problem starts right when the Imac's display goes to sleep.     I have owned the iMac for approximately 5 months now (bought it used) and the problem started about a month ago.
      Assuming this has to be serviced I dread to wonder the price .
      Thanks for anyones help.

    The sleep timeout has nothing to do with disk activity. It's based on user input, although some background processes can pre-empt it. If you don't want the machine to sleep automatically, disable automatic sleep in the Energy Saver preference pane.

  • HP Desk top Model # 500314 Sleep Mode/Moniter will not wake up

    HP Desk Top Model 500314-  Windows 8.1 OS.
     PC will go into sleep mode but after approx 15/20 minutes when I want to wake it up the PC wakes up but  the moniter will not wake up(just a black screen).
    I have reset the power settings numerious times with all variations! same results. It is strange that the sleep mode works fine for the first 15 to 20 minutes and then the problem appears?
    All other aspects of the PC seem to be working alright. This is a new PC about 2 months old and the problem appeared from the first time it was turned on. All the latest Drivers and Windows updates are installed. HELP!

    Hello @larhoop,
    I understand that you are having issues with your HP Pavilion 500-314 Desktop PC running Windows 8.1 not waking up properly after being asleep for 15-20 minutes. I am providing you with an HP Support document: Troubleshooting sleep and hibernate issues in Windows 8, which has been designed to address issues such as the one you are facing. The steps for Windows 8 and 8.1 are the same so review the document and apply the steps set out within.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Monitor goes into sleep mode on start-up

    HP pavilion a6750f desktop, windows vista 64 bit. Error message on blue screen, If this is the first time you’ve seen this stop error screen, restart your computer. If this screen appears again follow steps below. (which this has been going on for a couple months)Check to be sure you have adequate disk space. If a driver is identified in the stop message (there was not) disable the driver or check with the manufacture for driver updates. Try changing Video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components restart your computer press F8 key to select Advanced Start-up Options and then select Safe Mode. Technical information stop: 0X00000000=0000005, (0XFFFFF800022B2D37, 0XFFFFFA6009840350, 0X0000000000000000) Collecting data for crash dump... Initializing disk for crash dump...Beginning dump of physical memory.Dumping physical memory to disk: 100%Physical memory dump complete. Contact system admin or technical support group for further assistance.So I read this and not sure of all it mean or what to do with it, so I shut the computer down and waited 6 hours and restarted again it opened into a screen having two option Start Windows Normally or Launch Start-up Repair I choose Normally, again Monitor went into Power Saving Mode, Tower stayed powered-up, but this time the Key Board had no power. Shut computer down I did try one more time and Monitor stayed in Power Saving Mode, and no Power to Key Board. Da da da that’s all folks.   What I have done is put a new video card in, a new hdmi cable and even a few prayers. What I want is do I cut my losses and purchase a new computer? Windows Vista has been a joke from its launch any way. or is there a fix, a part that I can purchase to fix this issue? 

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer is not able to display a video signal after originally displaying a blue screen, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Monitor or TV is Blank after Starting the Computer. This should help to enable your system to display the video signal again. If the issue continues, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
    www.hp.com/contacthp/
    I hope this helps!
    Regards

  • My iphone put its self into recovery mode and will not let me restore it what can i do ?

    i am really stuck my iphone does not seem to work it will not connect to itunes and i really do not know what to do it keeps telling me yo connect to itunes and restore but this is not working. i think the iphone software may be damaged but i am not sure has any one got any ideas :/ ?

    Put the phone in DFU mode (google it) and then restore.

  • TS3694 My iPad 2 (16GB, WiFi only) went into recover mode and will not allow restoration from iTunes.  Error message 3014.  Anyone come across this and a possible solution?

    Error code 3014 question.  iPad 2 (WiFi only, 16GB) went into recover mode.  I am not able to restore from iTunes.  iPad had the latest software & iMac is latest as well.  iPad has very few applications... < 6GB used prior to this.
    Any help.

    Sorry but that was a completely pointless post.

  • My phone randomly went into recovery mode and will not turn on, how do i get it to turn back on without lossing my information on the phone?

    How do I get my phone turn on and get out of recovery mode and save my data on the phone?

    Try using RecBoot to kick it out of Recovery Mode.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Is it Dead?  ipod mini goes into disk mode, but will not reset  or restore

    and is not recognized by the computer (Vista) or by iTunes. I have also tried to connect it to different usb ports and to different computers (3). Same result with all of them.
    Before the problems, I had attempted to install compact flash (adapter with 8gb micro sd memory card).
    Any thoughts?

    Hi,
    Again, this is a problem with the Logic Board. When something metallic or conductive (screwdriver/watch/finger) shorts two components on the board. I can sort this out for you, if you don't feel confident doing the repair yourself.
    Thanks,
    Mark
    <Edited by Host>

  • My iphone 4 will not go into recovery mode, and will not charge or connect to itunes. Also, it randomly shuts down.

    So when I plug it in, it doesn't recognize that it's being plugged in. I've checked the charger cord, and everything. By the way, I think it's ios 7.1.2, but I'm not sure. It's definately ios 7

    Try holding the Sleep/Wake and Home buttons down until the Apple logo does not reappear--even if it takes a few minutes. Then try the DFU mode.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My 4500 all in one goes into power save and will not come out of it without pulling the power plug.

    I have tried hitting the power button short and long, pushing every button, but it seems the only way out is pulling the power plug.
    Thanks for any help.

    HI
    This is a known issue and HP is working on Firmware to fix this issue. This will be released soon.
    So please use the workaround for the time being if the printer goes to power saving mode.
    regards
    Mugu
    ---- If my answer was helpful please click the "Kudos" star.
    If your problem is solved please click the "Accept as Solution" button ---->
    Though I work for HP the post are of my own

Maybe you are looking for

  • TIME MACHINE EXTERNAL DRIVE BACKUP DISK CANNOT BE MOUNTED

    Hello, Last week i brought a WD MY BOOK LIVE NETWORK DRIVE. I hv 2 Windows PC and 1 MACBOOK. All data residing on these 3 computers i intend to back up. One Windows PC i was able to successfully connect, 2nd Windows PC not yet connected. Macbook conn

  • Color correcting - broadcast warning.

    what does the yellow exclamation mark on broadcast safe mean. Have been reading Ken stons CC tutorials and have been working to make my whites hit the 100 mark in my waveform. If it goes over 100 the warning lines turn red - obviously illegal - but a

  • Adobe flash player not working- need help urgently

    Hi I hope somebody would help me I have windows vista home premium, where few months back when I was using the computer it came for a message requesting me to upgrade my adobe flash player to version 10. which I did and its the biggest mistake Eversi

  • My dream-machine...

    http://img207.imageshack.us/img207/1375/icontrolpro32med5jj.jpg okay... so i'm a geek. iMac G5 1.8ghz, 20   Mac OS X (10.4.2)  

  • Function query

    hi, Using function need to find the student id is present in the table or not. Is this right or i need to change the code. Please advice me create or replace function stud_exist (id in number) return number is cnumber number; cursor c1 is select stu_