Monitor hp pavilion 23xi and wall mount

Good morning everyone, I'm a possessor of an hp pavilion 23xi monitor and i was wondering if there's a way to mount it on a wall, surfing on the web I didn't find anything about my question, does anyone of you mounted the same monitor on a wall? If so, can you explain me how can i do it? Thank you and sorry about my bad english.

Hello francesco90,
I understand that you are inquiring to see if you are able to mount the HP Pavilion 23xi 23-inch Diagonal IPS LED Backlit Monitor. Unfortunately, there is no mounting option available for this monitor.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a wonderful day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Hp Pavilion 23xi Underscanning Resolution

I recently purchased the Pavilion 23xi and I loved to picture clarity and quality, but some games such as Crysis Warhead had some image lag issues. I thought there had to be a way to fix this. I went to the HP website and searched for the 23xi and found the Pavilion 23xi driver. After the installation the monitor now underscans the visible image by about an Inch on the top, left, and right sides of the screen. This creates a black border that now spans the full length of each side. I thouhght maybe it was the Catalyst Control Center, but no scaling options are allowed (other than GPU scaling enable/disable). I then thought maybe my VGA cable was the cause, I tried an HDMI cable with no change. I then thought maybe it was the software, hooked up my laptop still no change. My last thought was that maybe a scaling option had gotten ticked on the monitor, I can see a custom scaling option for the monitor but it is not selectable in any form. Also I am running Windows 7 x64 with a Radeon HD 6970. Is there someobody who can help me correct this, please?
This question was solved.
View Solution.

You can test the display by connecting it to a notebook via the HDMI displayport output and using presentation mode to extend the display onto the monitor.
When one starts installing drivers for devices that an OS has for them in its driverstore then things start going wrong.
You really should consider rolling back the display driver installation. Go into system restore and choose the checkpoint that was created when you installed the display's driver. Once you have done that go to the Crysis forums and take a look there to see what others have done to resolve the image lag.
In the future do yourself the favor of not installing a driver for a new display, unless it is a touchscreen or another special type of display. Your Hp Pavilion 23xi display is a PnP (plug n' play) device. That means plug it in and use it. The OS will take care of installing a WHQL driver.
An example of what I mean is in the following image. I have two P n' P displays connected to this desktop PC's video card outputs. I can play any game currently on the market with this PC without low FPS or lags.
BTW, you are better off using the DVI input for games and videos and the display's recommended native resolution. Back away from the old school VGA.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hp Pavilion 23xi monitor brightness in bottom right corner is darker then the rest of the screen

Since yesterday the brightness in the corner in the bottom right is much lower then the rest of the screen.
How do I fix this?

Hello @PieterVdw,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the bottom right corner of your HP Pavilion 23xi monitor is darker than the rest of the monitor and you are seeking assistance in fixing it. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. If it does I think it would be best if you contact HP Technical Support for repair options.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

External HP Pavilion 23xi monitor cuts off laptop audio

I want to use my HP Pavilion 23xi monitor as an external monitor for my laptop (Sony Vaio, Windows 7). The laptop only has an HDMI connection, so I used an HDMI cable to connect it. The HP monitor works fine, but when it is connected, it cuts off all audio output on the laptop. There is no sound from the internal speaker on the laptop, or from the headphone connection.
If the HDMI connection automatically takes over the audio output, surely there should be at least a headphone socket on the PC? I can't change the connection type, as the laptop only has HDMI for an external monitor. Is there any configuration change that will fix this?
This question was solved.
View Solution.

Hi,
As you mentioned, the HDMI sound may take over sound, disable HDMI sound may help. Pleae try:
Right click the speaker icon
Select Playback devices
Right click HDMI sound and disable it
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Pavilion 23xi has a very bright backlight and very poor contrast

My Pavilion 23xi has a contrast like screen of cheap price netbook, may be 1:140 may be 1:100.
No any result after all attempt of ajastments:
- no when contrast =100,
- no when contast = 50
-brigtness from 35 to 55 is comfort for me
-gamma off
-dynamic contrast off and on (small difference)
-preset = text
I can see only grey screen, it is not same to black!
On this photo you can see the trouble (white balance of monitor is full correct, some blue copol is only photo's problem)
What can I do without transportation to dealer (I live in Russia, very big country for comfort technical service)
Engineer menu of HP 23xi is very poor, there is not any useful items to reduce the LED emmitance

Hi Yuriry-Spb;
I regret that you are still having difficulties.
I am sending you a link on "Display Quality Issue"click here.
If none of these steps resolved it and it is under warranty I would call technical support..
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
Please let me know the results.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Pavilion 23xi 23 monitor product number C3Z94AA - Pink color screen

This EXACT thing just happened to me.
Prior to calling HP support, I searched google and found several incidences of this problem.
I also did EXTENSIVE troubleshooting per instructions found on HP forums prior to calling.
And of course this monitor went out of warranty a couple of months ago - only a 1 year warranty???
I tried the using the motherboards graphics card (VGA) and also tried DVI, VGA & HDMI on the Nvidia Geoforce GTX670- all had the same issue with this monitor using different cables and connections.
I connected another monitor I have (Samsung) and it's displays great without problems.
Tried on both Windows 7/64bit & Windows 8 with all current drivers (checked to see if there were new ones)
This monitor Pavilion 23Xi even shows the discoloration and ghost icons when NO cable is connected to the computer and the monitor is just powered on??!!!
Even though I did all this troubleshooting and explained all of it to the tech rep when I first called she said that she could help me for a charge, but would refund it if she was unable to fix it.
I told her no, I did not want to pay a charge because I was pretty sure after a factory reset, another monitor that works ok, trying three different connection types DVI, HDMI & VGA, two different graphics cards and the monitor doing the same ghost icons/discoloration when it was not even connected to a computer - that is was the monitor.
She put me on hold and said that she got permission to troubleshoot without charging me.
We went thru all the steps I did again, powering off, trying different cables, connecting a different monitor etc and of course after all that she said it was the monitor and I would need to take it into Best Buy or some other store to see about getting it repaired.
I do not know the cost, but if its more than $50, I will probably just buy a different brand monitor that has a 3 year warranty, did not notice (slaps self) that these HP's only have a 1 year warranty when several other brands I bought previously all have 3 years... :-(
I should have went with a different brand to begin with based on my problems with HP inks, printers and prices from the past.
It just started doing this today, but is *very* annoying when you paid extra to get a higher quality image.
I just added an image of dropping to the command prompt, that shows that this HP monitor Pavilion 23xi shows ghost icons and images from previously visited pages if you look very closely.
It's really weird, like the monitor is retaining images in a buffer or memory but a reset, power off, holding down the on/off key for 20 seconds (which tech had me do) does not clear this.

Hello ytran, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your monitor is displaying an unusual pink hue, and I would be happy to assist you in this endeavor! For the discoloration displayed on your monitor, I recommend following this document on Display Quality Issues. This should help return the resolution on your screen back to factory settings. If the issue persists, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl I hope this helps! Best Regards

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

My iPod Classic is stuck in disk mode, won't charge on a wall mount, iTunes won't recognize it, and it got this way from me trying to restore it like it said. What do I do now?

So, I tried to restore my iPod to the factory settings via iTunes. It has been a few days now and its still stuck in disk mode telling me "Do Not Disconnect" and it only charges on my laptop. I tried hooking it up to a wall mount to charge and than it told me that I need to use iTunes to restore it. Here's the thing, it won't leave disk mode and its not registering on my iTunes. What can I do to get it back to normal,
Oh yeah, all of the latest updates for my software and iTunes are current.

Mee too!
That's my SMART DATA results:
Retracts: 134
Reallocs: 351
Pending Sectors: 1
Start/Stops: 124
Temp: Cur 35c
min 19c
mac 47c
What can we do?
Change HD?
I also tried to restore it in the DFU mode, but still rebboting in disk mode!!!

Just bought HP Pavilion 23xi monitor, but no sounds. is there built in speaker?

just bought HP Pavilion 23xi monitor, but no sounds. is there built in speaker? or any HP monitor has built in speaker?
This question was solved.
View Solution.

Hi,
The following link shows its specs:
http://www8.hp.com/emea_africa/en/products/monitors/product-detail.html?oid=5328978#!tab=features
No speaker. Please try the following nice monitor:
http://store.hp.com/webapp/wcs/stores/servlet/us/en/mdp/accessories-88342--1/hp-pavilion-touch-monit...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have a touchsmart 310 and am looking for a wall mount. What type do I need?

I currently have a TouchSmart 310 and am looking for a wall mount. Every site I check only seems to have the adapter for the 310, but the entire kit for the 600 and 9100 series. I am unsure what to purchase. Please help.

Have you looked at the http://www.iversal.com adapter? you just use that and any standard VESA wall mount with it.

Cinema VESA wall mount and original iMac G5?

This has probably been asked before, but does the Cinema VESA wall mount like this one:
http://www.macconnection.com/ProductDetail?Sku=5202648
Work with the iMac G5 1.8 Ghz original model? Or is only the original wall mount that came out when that iMac came out able to work with it?

I was hoping to find something on this forum about locating the VESA adapter kit for the G5 iMac and your thread is all there is . Every on-line retailer that shows them in stock actually have none (I called 5 different ones...Why can't they update websites?!?!)
Did you have any luck finding one. I am moving into a smaller studio and I desperately need to mount my 17-inch iMac. I can't find anyone anywhere! I even called the Apple store number listed on the website and the guy on the phone acted like he had no clue how to even search to see if Apple had any and his response was, "AppleCare would probably be able to help you out more than I could.." Sure enough I got transfered to a dead-end and after 20 minutes I hung up the phone!
What happen to all of the VESA mounts they had. I swear like 3 months ago they were selling them in the on-line store! What does Apple do with all of them? Trash them?
Anyways, please let me know if you were successful. So far I am getting no where

Wall mounting and stand for wrt600n?

Hi all, I was wondering if the wrt600n can be wall mounted? i can't find any holes like on most other routers, so am I out of luck? Also, the website shows it sitting on a stand so it can be placed vertically on a table, but mine came with no such stand. I am missing something or is this normal. Is there a way to have it stand vertically? I appreciate the help. Paul

thanks everyone for the responses. yea, i think i am just going to jerry-rig something and make it work. i tried contacting linksys and boy was that a waste of time. i got people who couldn't speak english and wasted my time. thanks again and take it easy.

Wall mounting and TV

I have 2 questions regarding the Imac G5
Can it be wall mounted?
Is there a way to watch TV through the mac? I had a friend who was able to do this on a PC with a TV tunner or other.
Anyways, it would be great to be able to do this as I have very limited room

Absolutely, I am thinking of doing this too. There is a wall mount in the Apple Store, online, for $29.00 USD. It is made specifically for iMac G5.....
Here is the link-
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/72404/wo/2S1lssT 20aKb3UKukVd1R9g6Tb4/2.SLID?mco=7CAE1DEC&nplm=M9755G%2FA

Quality of new build of HP Pavilion 23xi / firmware issue?

Hi. I bough one HP Pavilion 23xi one year ago and I was very impressed with the image quality. So I bought one recently, but I noticed a difference between them: when viewed from above or side, this latest one has light leaks and a not-so-uniform display of colors, which get washed out more quickly when viewed from other angles. This does not happen with the first one, and it's independant of operating system (tried on Windows 8.1 64bit and OSX Yosemite.
Is it a build quality or firmware issue?
Firmware of monitor 1: RIM111 / 2013
Firmware of monitor 2: RIM232 / 2014
Also the OSD is different between monitors - how can I update firmware RIM111 to RIM232 ?
Thank you.

Hello @bmoreira,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the quality of your new monitor shows light leaks and not-so-uniform display of colors from different viewing angles. I would be happy to assist you in this matter!
I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Wall mounting Apple Studio Display 17" M7649

I have a recording booth and am using the Apple Studio Display 17" M7649 as a display for copy. Currently is sits on a shelf. I need to get rid of the shelf due to echoing.
Is it possible to wall mount this monitor...if so ...How?
Thanks,
Antny

Sometimes those ports just die. Wouldn't be the first time.
Other times, it is the ADC connector that is the issue.
Try replugging the ADC connector.

Monitor hp pavilion 23xi and wall mount

Similar Messages

Maybe you are looking for