Monitor not detecting connection after installing TI4200 8X

Question

Attempting install of GForce4 TI4200-VTD8X (MS-8894). Searched through the manual and says it can support 4x agp but when I put it in the computer the monitor cannot detect a connection to computer but behind the message saying so I can make out activity while my computer boots up...the stages of the boot process are noticeable but are moving rapidly from left to right and fast enough to be not able to see. But the main factor is that it says it cant see the computer but there is residual display behind the message saying so. Since I cannot boot the computer to install drivers it must be something else perhaps in the Bios but ive verified its set to 4X AGP (which is max) especially since I was using AGP beforehand. Perhaps there is another setting I might be missing in the Bios?
ASUS A7V 133 4X AGP
768MB Ram
400 watt powersupply
KDS monitor "19"
Ah yes currect video card being used is a GForce 2 MX also agp

Answer 1

Cannot even see to boot to safe mode. Only thing that can be seen on the screen is the "cable plugged in?" and behind it the chaos indicating at least some activity. No readable text. Just the changes in the boot process are noticeable from the changes in the "chaos" color behind it. Text is there but its skewed severely and flys from left to right too fast to read. Swapped in prior card and works fine and while there lowered resolution to 640X480. Although the resolution shouldnt matter since the boot process and mem check all have the same behavior.