Monitor not receiving signal from computer

I have an Envy 700-074 and I bought a EVGA Geforce GTX 660 (Superclocked) video card to use with it this past July. It worked very well for the past few months until mid-September when I started having problems while play WOW (I had no problems playing other games that required more video than WOW or in doing my 3d rendering). So two days ago I contacted Blizzard support for advice and they told me to run this display driver uninstaller from guru 3d to totally remove the nvidia drivers from my computer and then reinstall them fresh. Well when I ran the driver remover program, my screen went black and now I can't get any display response at all from my computer. The monitor says it is receiving no signal from my computer. I tried with both a DVI hookup and a VGA hookup and got same response. Please tell me what I can do to fix this. I need my computer.

Hello @Eanori,
Yes re-formatting should get you your drivers back and at the very least give you a clean build to work from. I am going to provide you with all the steps to backup and recover your computer back to factory settings. To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 8), which will ensure your personal files are up to date.
***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 8), which will you through recovering your computer back to factory settings.
*** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
If the above steps did not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Hp laserjet 1300 not receive signals from computer

HP Laserjet 1300 seems not to receive signals from my computer. Please explain
This question was solved.
View Solution.

Are you networked or USB cabled into from the printer into the computer?
What OS are you using?
If you are on windows 7 and networked in, then you need to check and make sure the that the IP address of the printer is listed as the same in the port settings.
If you are on windows 7 and are using a USB cable, then you have to load the printer through the IN-OS driver. See the link below...
Install the driver included in the Windows 7 operating system (OS)
If you are using some other OS or driver, please let me know.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

My Ipad will not receive signal from new home Xfinity modem. I reset Pad but still doesnt work.

My Ipad will not receive signal from new home Xfinity modem. I reset Pad but still doen't get WIFI

Does it not show the presence of a wifi signal, or just not connect?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My iphone 4 does not receive signals from my carrier

my iphone 4 does not receive signals from carrier

Tap Settings App>General>Reset>Reset Network Settings. If this not help may be Carrier problem, contact them. If still problem could be faulty iPhone.

External monitor not receiving signal

In a MacBook Pro with Mountain Lion 10.8.3 when connecting to an external monitor does not appeare to be receiving signal.

Apple support article:
Video Troubleshooting Internal and External Monitors

After I did a reset my gps app will not receive signals from my remote G PS device. I have an iPad 2 wi-if only. The remote GPS device is pared and has a strong signal. I reinstalled my gps app, no luck.

After I did a reset my gps apps will not receive a signal from my remote GPS receiver. The GPS app wa working fine before. I reloaded the app but no luck. My remote GPS receiver is paired to my iPad and has a strong signal.

Hi there.
Thank you very much for your quick reply, it's really appreciated.
No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
I guess I need to fire up my PC and download it / sync my iPad.
Thanks again for your help

Samsung Monitor not receiving signal through HDMI Mini DisplayPort

I have been having issues using my Macbook Pro on an external monitor lately.
Up until a couple of days ago I was using my monitor as the primary display for my laptop and using the Bluetooth keyboard and trackpad, so my laptop has been closed. I tried to 'wake up' my mac as I usually would do but nothing happened, the monitors power light kept flashing, which is what is does when it isn't receiving a signal, so as anyone else would I investigated and found that my macbook was working the way that it normally would except it doesn't detect the external monitor at all.
I have tried changing the cable, changing the monitor from my 23" samsung display to my 42" sony tv, Restarted my mac more times that I could count and have also updated to the latest software that I possibly could.
I am going to buy a new Mini DisplayPort adapter tomorrow but I would rather just fix it with what I have if I can.
Thank you for any help that can be provided.

Check the cable does not have an air gap at either end.
Sorry ... no other ideas.

External SDI Monitor Not Receiving Signal

I have been Premiere Pro CS6 with no problems in getting a video signal via SDI using the Blackmagic Ultrastudio Mini Monitor. Moving to CC I have the exact same setups, but the image will not come through to the monitor at all. (sending SDI signal to Flanders reference monitor)
All the Premiere settings in Preferences >> "Playback" and "Device Control" are identical between CS6 and CC. The Black "Desktop Video" driver is the latest version (9.9.3) and settings are same when trying CS6 and CC.
What else might open up the video output signal and be different in CC setup than CS6?
Thanks!

Check the cable does not have an air gap at either end.
Sorry ... no other ideas.

How to receive signal from Roland RD300SX in Logic Pro 8??

Hello everyone,
I have problems with setting Logic to receive any signal from my piano - Roland RD300SX.
I have installed the drivers for the piano and was hoping that Logic will simply "see" it, but unfortunately it doesn't.
I have been looking for information in the Logic manual, clicking and unclicking many options for the last few hours and nothing seems to work.
When I enable input monitoring all that happens is to receive signal from my built in microphone.
I know that the USB cable works well because when I go computer information I can see Roland being plugged in to one of my USB ports. So this must a Logic setting problem...
I will be extremely grateful for any information and help!!
Thank you in advance!!
All the best,
Natali

Sampleconstruct thank you for your answers, I finally found the solution.
The Roland was not appearing in the Audio Midi Setup and it wasn't recognized until I changed one setting in the piano itself. Despite the fact that I had a CD with the USB drivers which were set up in my computer, it finally worked when I switched the USB driver setting into the "Generic" one (which means that it doesn't use the drivers from the provided CD but the ones of my OS). I don't know why it prefers the OS drivers since there is a CD provided especially for that reason, but the most important is that everything works now!:)

Warning ALSB Statistics Manager BEA-473007 Aggregator did not receive statistics from ...

Hi,
I am using cluster with osb_server1 and osb_server2. While starting the servers, I am facing below error on Managed Server(osb_server2) but only warning on Managed Server(osb_server1).
Warning on managed server1(osb_server1)
<Warning> <ALSB Statistics Manager> <BEA-473007> <Aggregator did not receive statistics from [osb_server2] for the aggregation performed for tick 1855320.>
Error on managed server2(osb_server2)
<Nov 24, 2011 11:23:00 AM UTC> <Error> <ALSB Statistics Manager> <BEA-473003> <Aggregation Server Not Available. Failed to get remote aggregator
java.rmi.UnknownHostException: Could not discover URL for server 'osb_server1'
at weblogic.protocol.URLManager.findURL(URLManager.java:145)
at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:94)
at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:54)
at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$000(ALSBStatisticsManager.java:38)
Truncated. see log file for complete stacktrace
Please provide your solutions here.
Thanks

Hi,
I am using cluster with osb_server1 and osb_server2. While starting the servers, I am facing below error on Managed Server(osb_server2) but only warning on Managed Server(osb_server1).
Warning on managed server1(osb_server1)
<Warning> <ALSB Statistics Manager> <BEA-473007> <Aggregator did not receive statistics from [osb_server2] for the aggregation performed for tick 1855320.>
Error on managed server2(osb_server2)
<Nov 24, 2011 11:23:00 AM UTC> <Error> <ALSB Statistics Manager> <BEA-473003> <Aggregation Server Not Available. Failed to get remote aggregator
java.rmi.UnknownHostException: Could not discover URL for server 'osb_server1'
at weblogic.protocol.URLManager.findURL(URLManager.java:145)
at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:94)
at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:54)
at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$000(ALSBStatisticsManager.java:38)
Truncated. see log file for complete stacktrace
Please provide your solutions here.
Thanks

I am not receiving notifications from my BlackBoard app even though it is turned on in the Notification Center. It works on my iPad but not my iPhone.

I am not receiving notifications from my BlackBoard app even though it is turned on in the Notification Center. It was working fine until a week ago.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

I am not receiving mail from either of my accounts. It keeps telling me the port is timing out. The internet is working however.

I am not receiving mail from either of my accounts. It keeps telling me the port is timing out. The internet is working however.

Was the iPod previous synced to another iTunes library/computer?
Was it setup via wifi?
Setup via iTunes when connected to this coputer/iTunes library?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Lat, restore from backup. See:
iOS: How to back up

Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page. I continually get a message that the computer cannot communicate with the printer.   Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else.
Each time I want to print, I must reboot the computer. After reboot I have one chance to print.   This problem started February 15, 2015.
My operating system is Windows 8.1.   I have unintalled the HP software, rebooted, then reinstalled the software:
OJ8500_A910_1315-1.exe
HP Print and Scan Doctor - HPPSdr.exe
HPSupportSolutionsFramework-11.51.0049.msi
All versions were last downloaded on April 4, 2015.
I have a home wireless network (Ubee DDW366 router). All other devices in the house will print to the 8500A printer without issues: 2 Toshiba laptops, 2 Android phones, and 1FireHD.
The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working.   The card and Windows 8.1 were installed on January 3, 2015.
I have run virus scans and malware scans. Each time they show there are no issues with my desktop. What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer. ASUS Motherboard P6X580 Premium. Now I will probably get hacked!
I am at my wits end. And it is frustrating when I need to make a print of something and the system locks up. I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed. Also this is a time consumer.
This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
Help?
Addendum: I can scan using HP Printer Assistance. I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds.   I have no trouble with scanning.
This question was solved.
View Solution.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Can not receive emails from third party email accounts

Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally.
This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
Thanks a lot!!
Sammy

Checklist for testing inbound email problems, I am assuming outbound emails works ok.
1. Check Port 25 forwarding on all modems routers/firewalls
2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
3. If using POP Connector Service, make sure POP accounts are created properly
4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

Monitor not receiving signal from computer

Similar Messages

Maybe you are looking for