Monitor will only show sleep mode and nothing else

monitor showing only sleep mode and I have turned off and I have tryed to restart but no scrren but sleep mode.

Could be different things: Cable, video-socket in computer, or the monitor itself.
do you have the option of trying another cable or another monitor?
Perhaps go to a friend and see if they can help you.
In order to determine what's the issue, you'll need to do these tests.
Please let me know the result of these tests so I can determine the exact error.
AlHaste - HP Notebook Technician
Were I able to help you? Please say thanks by clicking on the purple thumbs up icon over to the left
Did I solve your issue? If so, Please mark Accept As Solution to the right

Similar Messages

Update the iPad 2 with new iOS uppgrade, but after the screen only show the apple and nothing else. has been the case since yesterday. have turned off the iPad and turned it on again many times, but still only apple shown. What should I do?

UPdate the iPad wjith new iOS upgrade that where shown under settings on the iPad, but after I did the upgrade the screen has only shown the apple and I can't get back. This has been the case since yesterday. Have turned off t.he iPad many times, but every timebwkhen Ibturn it on again the screen onöy show the apple icon and nothing else happends. What should I do? Anyone having the same problem and how can this be solved?

Did you try to connect in recovery mode, explained in this article?
iOS: Unable to update or restore

I tune 10.5 will only play purchased songs and nothing else in my library

Installed iTunes 10.5 and now only songs that are purchased can be heard clearly and at the right speed. Help!!!

im having the same problem, and its making me mad because overr half of my songs are from cd's

My email will only show the sender and subject lines, but no content. What can I do?m

My email will only show the sender and subject lines and does not show the content of received emails on my ipad. How can I fix this?

I am having the same problem. As recently as this morning, I could read entire hotmail emails on my iPhone 4 now, I can see only the sender & subject. What us up? Any solutions? Thank you.

Ipod classic will only show apple sign and a big red X when I try to do anything? What happened? How do I fix it?

Ipod classic froze and after resetting it, will only show a grey apple sign and a big red X when I try to do anything. Don't know what happened. Don't know how to fix it. Tried everything it says to do in support. At this point I would be happy with getting it back to factory default.

Hi katieperkins99,
Welcome to the Apple Support Communities!
I understand that your iPod classic is displaying a red X icon on the display. In this situation, I would recommend restoring your iPod from Disk Mode. Please use the information located in the attached article for instructions on completing the process.
iPod Displays a Red "X" Icon - Apple Support
Cheers,
Joe

WII and VCR will only show in black and white.

While in WII or VCR mode, the video only appears as black and white. Any suggestions?

You might want to try this as well.
1 From the Preferences menu, highlight AV Input.
2 Press left or right to select your desired setting.
so if your using a composite cable, then you have to switch AV Input to VIDEO then if you are using component then you have to switch back to COLOR STREAM

My Ipad device is only showing the apple icon nothing else is happening..what's wrong

How do I get my screen to come back on, it is only showing the apple icon.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Common Libraries are only showing up graphic symbols, nothing else

I've created my own common library but when i retrieve it from the common libraries drop down, the library only contains graphic symbols even though there are movie clips, bitmaps and folders in the master file. If I open up the library by importing an external library it does show all symbols.
To create my own common library: I created a flash file containing graphic, movie clips and bitmap symbols and then copied it into the user-level libraries folder on my hard drive. It does show up in the common library drop down but the library doesn't show all symbols.
So do common libaries only show graphic symbols? and if not then am i doing something wrong?
Thanks.

Hi,
What version of Flash do you use?
Rafiq

IPod shows apple logo and nothing else

I managed to put it on disk mode, and iTunes actually "saw" it. I even uploaded some tracks, everything is ok supposedly but when I reset it, it shows the apple logo and won't do anything else after that. All you see is the logo.
That was the case even before I upload any of the tracks.
thanks in advance guys
PowerMac G4 Mac OS X (10.3.8)

You need to put it back into disk mode, connect it to the computer, and restore it with the ipod updater. The ipods software is not installed correctly. Here is a link addressing your exact issue. The artical also contains links about restoring an ipod http://docs.info.apple.com/article.html?artnum=61584

Screen only shows 3 tabs and nothing under each.

I turn on ATV2. I only get the 'internet', 'computers' and 'settings' tabs. Nothing under 'internet'. Can't share comp. And everything under 'settings' is still there. I checked for updates. It tells me it's up to date. I wanna watch netflix or youtube. What can I do? Please help.

This issue can be caused by the Babylon Toolbar 1.1.8 extension
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My ipod touch 4G will only show apple logo, and can't be turned on and off?

It eventually runs out of battery but that doesn't change anything. All i can do is hold down the power and home screen button simultaneosly for a while. After this it flashes white then black then back to logo. Anyone know what to do? I plug it into my computer and it doesn't show up or anything. Any suggestions? my itouch hasen't had problems before or anything.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Flash swf. file will only show in template and not linked pages

I placed a swf. file on my template page in a non-editable region. I then updated all the files that were linked to that template.
I then looked at the linked pages in Dreamweaver and I can see the image of the swf. in all the affected pages.
However when I check the pages through the browser the swf. is not there.
I'm using Dreamweaver cs3. Can anyone help?
Thanks,

Hi
I do not use dw templates, but the problem is probably with the linking. Also if your swf file is linking to other files then all your html pages must be in the same position in your file structure as your original, (working) html page, otherwise the link references will be wrong.
PZ

I have two windows open, but one will only show the preview and when I try to bring it up, it won't open?

I can see the window as a little thumbnail when I hover over the firefox icon in the taskbar - & I can even change the contents, because it seems to be the 'main' window, so when I tried to change a setting in my add-ons, the add-on window opened in it, and I have no way of reaching it. When I try to click on the window to bring it up, it 'selects' and is highlighted, but it never comes up, no matter how long I wait.
I can close the window that does pop up, and the other window remains unaffected. Even manually trying to "switch over" to the window from the task manager won't work.
EDIT: I am all up-to-date, Firefox 15.0, etc.

Perhaps the PLUGIN Update feature needs to be engaged to assure that both Java and Shockwave editions are current. It requires 'Help' > 'Firefox Help' > where the lower right side displays a link for Plug-In Update...

When I open Creative Cloud there is only a thinking wheel and nothing else. I have downloaded it again but still doesn't work. I want Lightroom and it keeps saying I need this to download it.

I have downloaded it again but still doesn't work. I want Lightroom and it keeps saying I need this to download it.

1.If internet is fine then this might be becase of Creative cloud files, please try the steps metioned in http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g-cc.html and see if it works.
2.Please navigate to ~/Library/Application Support/Adobe/OOBE/opm.db and trash it. Try to launch CC desktop and sign in with your Adobe Id (http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html) .
{Note for step 2: The file is in the user Library, not the Applications folder. To see the hidden user Library (not the system Library) in the Finder click on the Gomenu item and then hold down the Alt / Option key. You will see Library appear between Home and Computer. Click onLibrary and then navigate toApplication Support > Adobe > OOBE.
Alternatively open the Terminal and paste in the following and then press the Enter / Return key:
rm ~/Library/Application\ Support/Adobe/OOBE/opm.db, This will also delete the file}
Other related threads:
http://forums.adobe.com/message/5468864 (spinning blue wheel)
http://forums.adobe.com/message/5469306
Hope it works.
Regards,
Rajshree

Why does Startup Manager only show Recovery HD and not my other drives like Macintosh HD and my USB drive?

I'm not really sure what happened to my Mac but when I start it, it only shows Recovery HD and nothing else. I tried re-installing Mountain Lion through my Apple ID but it states that I have not purchased it and will not let me proceed. I have bought a usb drive that has Mountain Lion, since I cannot purchase it in the apple store, on it to install it from there but I cannot boot into my USB because it only shows "Recovery HD" in Startup Manager. I would really appreciate some input from you all, thank you for your time in advance.

Either your drive is failing or has been corrupted. Please try the following. You cannot do the following unless you have purchased Lion or later. From your post that's not clear. Without knowing your exact model I cannot tell you what to do.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
If your computer is a 2010 or earlier model, then you should be able to do the following:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Monitor will only show sleep mode and nothing else

Similar Messages

Maybe you are looking for