Monitoring Disk utilizations,
Hi
we have recently installed Scom 2012 in my organization and i have created manually to Disk monitoring.
i set for 3 hour duration , every 3 hours it will keep on sending a mail .
any other setting is there to stop this ,
1)like once alert triggers till problem get resolve or disk utilization come to normal , dont want to creat same alerts.
Regards, Velu M
At first, Microsoft windows OS management pack has built-in disk utilization monitor which you can download from
http://www.microsoft.com/en-hk/download/details.aspx?id=9296.
In SCOM, you can use either or monitor or rule to monitor the disk utilization. You can refer the following for the difference between monitor and rule.
http://technet.microsoft.com/en-us/library/hh457603.aspx
In you case, check whether you are using rule or monitor
1) rule: rewrite the monitoring by using SCOM monitor
2) monitor: make sure that the monitor does not automatic close
Roger
Similar Messages
-
Dear friends
We have problems of performance with the system SAP (HP-UX with Oracle 10.2)
The Disk Util is 100% and the GLANCE command shows that the oracleSID process is using a high disk.
The problem is when any process to access toHi
we have similar problem few weeks ago. we are using HPUX 11.23 and Oracle 9.2.0.6.
many reason can cause this problem :
- write process (mainly) -- and read process too,that is not separated to some logical volume (or volume groups) but concentrated in one logical volume (or one volume groups). in this case write process will hit only in one LV ( or VG). to solve this, you must distribute write process into several LVs (or several VGs) so writer process will write evenly to the datafile in several locations. the same way when reading process from several LVs (or VGs) compared with reading in one LV (or one VG).
- bottleneck in your I/O. you must discuss with your hardware vendor and storage vendor, if there is some bottleneck that causing this.
what have happened to us is broken index of the most table we have caused by system restore few weeks before. after we are doing index for suspected tables, our utilization in decreased.
we are using command :
sar -d 5 5
to monitor disk utilization
and maybe nfile parameter (sum of files opened by OS at the same time) is useful to be monitored, using command :
sar -v 5 5
to monitor nfile parameter.
hope it help you
rgds,
Alfonsus Guritno -
Investigating disk utilization issue with performance monitor
Hello
im using windows 2008r2 server, lately the server became very slow.
i ran performance monitor with the "avg disk queue length" counter and it seems that is very high, how can i tell exactly wich process is consuming all the disk utilization?
Thanks!
GuyHi,
Thanks for your post.
Please refer to this article about hunting down hard disk resource hogs
http://www.techrepublic.com/article/how-to-hunt-down-hard-disk-resource-hogs/
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
High disk utilization every 24 hours
Hi all,
While troubleshooting an user's complain about slow access to his mailbox on a Windows 2012/Exchange 2013 environment, I came across this interesting behavior:
Disk utilization on the server will increase from 100KBps to 3000KBps (on average) and stay high for a good 10 hours or so. Then disk activity will go down for exactly 24 hours from the time it was up and increase again for another cycle.
Basically, no matter how long it takes to go down, it will increase again 24 hours later. Looking at Perfmon and Resource Manager all I could see during both periods is that store.worker.exe is always on top, and READ has higher values. The issue does not
appear to be related to business hours / backup window / client access to exchange, as it occurs at different times of the day and changes everyday.
I believe it has something to do with an internal maintenance/reporting/monitoring feature of Exchange 2013, as it happens on 3 Exchange environments we manage, completely apart from each other.
Microsoft Exchange Health Manager service has already been disabled as well as scheduled tasks under Microsoft/Windows/PLA and they all proved not to make a difference.
Any ideas out there?
Diego de Azevedo IT Analyst - MCSE, MCITPGood Call. I just spent the last few hours going over 550,000 events.
I reviewed the application log for a 24 hour period and here is what I noticed:
During the high disk queue period there are lots of entries for MsExchangeMailboxAssistants. For each of the 15 mailbox databases.
These only run during the High Disk Queues window.
TopN Words
Store DS Maintenance
Sharing Policy
SharePoint Signal Store
Search Index Repair Time Based
People-centric triage
People Relevance
Managed Folder Mailbox
Mailbox Processor
Mailbox Association Replication
Calendar Repair
People Relevance Feeder
Orphaned Mailbox Purge
Here are the examples of the log entries for Event ID 9017
Service MSExchangeMailboxAssistants. TopN Words Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. Store DS Maintenance Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. Sharing Policy Assistant. for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. SharePoint Signal Store Assistant for database *** is entering a work cycle. There are *** mailboxes on this
database.
Service MSExchangeMailboxAssistants. Search Index Repair Time Based Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. People-centric triage for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. People Relevance Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. Managed Folder Mailbox Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. Mailbox Processor Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. Mailbox Association Replication Assistant for database *** is entering a work cycle. There are *** mailboxes
on this database.
Service MSExchangeMailboxAssistants. Calendar Repair Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
There are 3039 of these messages as well:
The people relevance feeder for mailbox *** picked 16 sent items to process. Number of sent items successfully processed 16 and number of sent items failed to be processed 0. Total time taken to process this
mailbox 4539.8548.
It appears the purge of orphaned mailboxes happens only at this time as well .
These run throughout the day and not just 24 hours after the last restart/switchover.
Calendar Sync
Junk Email Options
Probe Time Based
Store Maintenance
Examples of the Event ID 9017
Service MSExchangeMailboxAssistants. Calendar Sync Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. Junk Email Options Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
Service MSExchangeMailboxAssistants. Store Maintenance Assistant for database *** is entering a work cycle. There are *** mailboxes on this database.
So how do I get the first group of maintenance tasks to run throughout the day, or at different times, or at least not all at the same time for all 15 databases?
Thanks!!
Well, its all workload based, so I don't think you can readily adjust that.
I'm more inclined to look at the specs of the mailbox servers. Are they up to the task and have they been vetted with the Mailbox Calculator?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Disk Utilization reach 100%
Hi Experts,
I'm using oracle 805, the SAS external storage use only for database. The external storage capacity is 2Tb and 60% is free. I check disk utilization using ST06 show 90-99, Kb transfered/s : 47,527. Then I check the processes in SM50, there is no heavy process, a lot of free work process. I check the avg. response time in ST03 seems normal, around 600-700 ms.
What make the disk utilization high?
thank you
HardonoHello,
This monitor shows entire operating system performance data and you are only talking about SAP processes .
Have you check in op system task manager for any server process which could cause bad performance?
Regards. -
Hi All,
Most of the time of of our application server is showing 100% disk utilization and due to this system performance is badly affected. Actually Apps server is having only one disk c drive and OS as well as SAP Application sits on the same disk. other apps servers are also having the same configuration of one disk.For all apps server we are using Windows NT and CI is on HPUX platform. How to resolve this issue?
Pls help
Regards,
PrashantHi Prashant,
The High Disk Utilisation indicate quite a few things lets discuss one by one.
1. Here i could suspect the DB time may be high and i think there would be presence of expensive sql statements, so just check in st04.
2. If you have Oracle Database then there is a chance of I/O bottleneck.
In the oracle session the I/O section is broken into subsections as
follow:
High Average Response Time per Read Request
High Average Response Time per Commit
High Average Response Time per Buffer Busy Wait
High Number of Waits for Free Buffers
High Number of Waits for Buffers being written to Disk
High Number of Space Waits for the Log Buffer
File System Response Times
So check the above mentioned part providers.
3. In the operating system monitor of the database server also we can find
the high numbers of I/O wait. This value indicates problems in I/O. So check on this.
4. And at last do monitor SM66 and if possible trace through st05 then we can
narrow down the problem why its going for Disk utilisation regularly. Try to find out the Report Name as well.
Finally analys the subsystem using external tools and still the problem is not getting solved the get in conatct with thehardware vendor of th I/O sub system.
Thank you,
Tilak -
How to monitor disk space in BW
can some body help me out on the following issues.
1)How to monitor disk space in BW?
2)How can I delete Application logs in BW?When I research with DB02 transaction code in BW, I encountered following tables having lot of log , please some body can help me, how to delete the following log data?
ARFCSDATA ARFC Call Data (Callers)
BALDAT Application Log: Log data
BSRWBSTORE Storage for binary large objects (Excel) -
Windows 8.1 running extremely slow with high disk utilization
My recently purchased Toshiba laptop with Windows 8.1 with 16 GB and I7 processor takes 3 minutes to start new programs. Running programs like Word, PowerPoint, Excel, PDF reader,etc stop in their track with every few minutes and show a circling
cursor. Task Manager shows 100% Disk Utilization all the time.
I ran McKAfee as well as Kaspersky to see if this was a virus/Trojan issue. Both came up with nothing.
At this point the laptop (though spanking new) is completely USELESS and I have no hopes of using it !!!!!
I noticed from many forums that I am not the only one facing this issue. The complaint count for this issue is growing in multitudes.
Please help!Try these steps.
Open task manager
Click on processes tab. You can see all the apps and processes that are consuming memory.
Click on top of column showing the memory. This will arrange them in ascending or descending order of how much memory is consumed.
Find the ones which is consuming maximum memory
Uninstall if you don’t need the program or app. Re-configure or re-install the software or app if it is an important one.
Hope it helps. -
Disk Utilization false alarms from EM dbconsole
Hi,
I have a 10.2.0.1 instance on Windows XP. EM frequently reports disk problems that don't exist. Example below. The disk is no where near 100% so I don't know where EM is getting this. Has anyone else had this problem? Is this a bug?
ex.
Name=op1t1tsr
Type=Host
Host=op1t1tsr
Metric=Disk Utilization (%)
Disk Device=1 E:
Timestamp=Jan 27, 2008 2:31:18 AM CST
Severity=Critical
Message=Disk Utilization for 1 E: is 99.97%
Rule Name=Host Availability and Critical States
Rule Owner=SYSMANNo, E: is an internal drive where the datafiles for the database actually reside.
One twist however, is that my windows roving profile attenpts to map E to another location. On this machine this does not happen since there is a local E driver but I wonder if the EM agent is somehow confused by this. In the Windows explorer the E drive actually displays the mapped location name, but when you drill down you see the local drive. -
Using LMS 3.2 can it possible to monitor device Utilization
Hi,
Running LMS 3.2. Can we able to see the utilization reports related CPU,memory,link,interface etc ??
Help me out!!!
Regards,
KrishnaHi,
If you have HUM installed along with LMS 3.2, you will be able to monitor Device Utilization too. By default HUM comes as an add on for 90 days of evaluation period with the LMS 3.2 bundle setup.
Thanks,
Gaganjeet -
Enterprise manager alert on disk utilization
hello..
i was wondering if you guys here know what the "3" means?
Disk utilization for 3 F is 90%, crossed warning (80) or cristical (95) threshold.
I understand that "F" means drive "F:" but what does 3 means?
thanks,
peacockWell, there is more than services to run Oracle on Windows. To do administrative works using EM, the user must be configured in the group, "logon as batch job" . But neither home or home premium has the option to manage groups. Additionally, as Ed mentioned, oracle never supported any of its products over any "home" edition of the o/s so using it for Oracle would be surely causing issues which in general would be bizarre only.
Aman.... -
Grid Control showing excessive amount of disk utilization.
Hi Folks,
I understand that Oracle doesn't support their products 100% on non Oracle VMs, but I thought I might take a stab at it.
I decided to stick with a simple installation of Oracle Grid Control running on a Windows 2003 R2 32 bit os, here are the steps I took.
1. Run Guest OS Windows 2003 R2 32 bit on a Windows 2008 x64 running Hyper-V (Yes I know why not EL5 running XEN, long story)
2. Install Grid Control with Database and Agent versions 10.2.0.2.1
3. Patch agent and oms to 10.2.0.5.0
4. Some minor issues, but managed to get by those.
- First off EM Website shows down, got to take a look at that, probably need to fix the beacon, not sure!
Problem:
- Grid shows that the host running em is over 100% disk utilization.
- According to Metalink this is a known bug in Windows 2000 Performance Counters (not 2003?)
- More specially Microsoft KB article Q310067.
- Metalink Doc Id: 303788.1
- Note, I'm running 2003 on a Hyper-V Guest, so anything can go wrong!
The specific error is:
Metric Disk Device Busy (%)
Disk Device 0 C:
Severity Critical
Alert Triggered Jun 3, 2009 7:57:54 PM
Last Updated Jun 4, 2009 3:48:48 PM
Acknowledged No
Acknowledged By n/a
Message Disk Utilization for 0 C: is 587.86%, crossed warning (80) or critical (95) threshold.
More info:
- Guest is running on a Dual Quad Core Xeon System with 16 GB of RAM
- Guest has dedicated 4096MB of ram
- Guest has dedicated 2 CPUS
- Guest is configured with a Virtual Disk (specifically partition c:\) to be on local Hyper-V disk array
- Windows 2008 Hyper-V host disk array is in a RAID 5 configuration running 10k SAS drives
- Windows 2008 Hyper-V host utilization is literary at most 5% (current is 1%)
- Windows 2008 Hyper-V disk utilization according to graphs is showing 100KB/s usage (less than 1%)
Temporary solution is to turn off the metric, but not sure if that's such a good idea.
- Note that 11g EM and 10g EM running on Hyper-V server had the same issue.
- Note that 11g EM and 10g EM running without visualization had no issues.
Any thoughts?It may be related to Bug 8677212: BACKUP INFORMATION FOR SOME DATABASES SHOWS INCORRECTLY
Although bug info says it for HP-UX, I've also seen the same problem on Grid Control 10.2.0.5 running on Solaris.
You may want to apply 10.2.0.5.4 Grid Control Patch Set Update (PSU) [ID 1139563.1] to fix it.
Best Regards,
Gokhan Atil
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks -
Hi,
I have windows 2008 R2 64 bit OS and database version is 11.1.0.7.0 64 bit ...
I got the below error via EM.
Target Name=ORSDEV.xxxdomain.com
Target Type=Host
Host=ORSDEV.xxxdomain.com
Metric=Disk Device Busy (%)
Metric Value=99.61
Disk Device=0 C: D: E:
Timestamp=Mar 21, 2012 7:41:58 PM SGT
Severity=Critical
Message=Disk Utilization for 0 C: D: E: is 99.61%, crossed warning (80) or critical (95) threshold.
Notification Rule Name=Host Availability and Critical States
Notification Rule Owner=SYSMAN
Notification Count=1
1.Can any one tell how to trace this warning and where to check for this alert ?
2.what is the meaning of Disk Utilization for 0 ?
3.How to identify the problem and resolve the issue in this case ?
Thanks & Regards,
Vikash (Junior DBA)Hi Vikash,
This "Disk Utilization" metric actually points to hos busy is the disk device (in percentage) and not a percentage of disk capacity. As a matter of fact, in the 11.1. Database Control, it has been renamed to "Disk Device Busy(%)".
Regarding of the meaning of a disk busy, it is the percentage of time the physical disk is active. And it may no be a problem, as you can see at http://sunsite.uakom.sk/sunworldonline/swol-08-1999/swol-08-perf.html : "Complex systems can be 100 percent busy, but still have a lot of spare capacity".
On the other hand, to check how "full" a Disk is, the metric 'Filesystem Space Available (%)' can be used. This metric represents the percentage of free space available in the file system. Also, the Filesystem Size (MB) checks the total space (in megabytes) allocated in the file system.
Hope this helps.
Thanks,
Cris -
Hi,
on 10g R2,
in documentation (Database 2 Day + Performance Tuning Guide) it is said :
To monitor memory utilization:
1.On the Performance Summary page, from the View list, select Memory Details.On my DBcontrol I do not have the View list to select Memory Details.
Would you confirme please that it is the case for DBcontrol ? And "View list, select Memory Details" is available only in Performance page in Enterprise Manager ?
Is in AWR report any part indicating host memory utilization ?
Thank you.do you use Standard Ed? in such a case AWR/ADDM is unavailable.
If you use Ent.Ed. then see parameters:
timed_statistics TRUE
statistics_level TYPICAL (best)
also see the snapshot interval and retention period:
col snap_interval format a30
col retention format a30
select snap_interval, retention
from dba_hist_wr_control; -
How does GC calculate the Disk Utilization metric.
Hi,
I am getting the following error:
Name=NT000786.oak.zone1.progress-energy.com
Type=Host
Host=NT000786.oak.zone1.progress-energy.com
Metric=Disk Utilization (%)
Disk Device=3 F:
Timestamp=Dec 20, 2005 12:26:11 PM EST
Severity=Critical
Message=Disk Utilization for 3 F: is 95.78%
Rule Name=Host Availability and Critical States
Rule Owner=SYSMAN
This is a 410 GB disc with 266 GB used. The oracle datafile only use 7 GB on this disc; the rest is for Symantic backup!Check the Notification Rule setting of Disk Utilization (%) in Preferences -> Notification -> Rules. Select Host Availability and Critical States to View or Edit.
There may be a situation where OEM may not understand the disk space while checking available space.
See this post and response
Re: Data Guard Bug, which patch to fix?
Maybe you are looking for
-
Whilst transferring songs from computer to computer, I went onto the old computer and enabled home sharing so that now both computers have home sharing and I 3was about to select which songs I wanted to tranfer, but I do not have the sharing taskbar
-
Address book entries wont save
Dear all, I open address book, make a new entry, or amend one, save it, exit and open address book again. Sometimes the amendment is there, but mostly not. I'm on the edge of depair, having purchased an iphone, macbook and mobileme, thinking they wer
-
Server connections not consistent. Folders grayed out with warning icon
For some reason, my mail.app has started showing grayed out folders and accounts with warning icons. Even though I am able to receive/send, mail seems to think the connection is not working. When I click on the icon, it reads "The server error encoun
-
When clearing a form, is there a way to also clear the photos?
I have an existing form created using Adobe Pro's form creation. This contains a label tool for adding photos. When I clear the form, the photos remain. Is there a way to clear out the photos of a form after one has already been linked? Thanks,
-
Time Machine stops backup before finished
Time Machine has stopped backing up automatically. On manual backups, it stops after backing up only part of my data. I have since reformatted my backup disk and reconfigured Time Machine, but it still does not complete the backup HELP!!!!