Monitoring of messages sent by HTTP Receiver

Hello,
is there any possibility to monitor HTTP requests sent by the HTTP receiver? I would like to check the header settings of the HTTP request. Thank you.

Hi Florian,
Do you mean Messages sent by HTTP sender?
YOu can monitor messages in SXMB_MONI transaction in the abap stack of the XI system.
Not sure, if you meant anythig else.
Regards,
Ravi

Similar Messages

"Wrong" content in response message from Sync HTTP receiver connection

Hello,
We're trying to set up a synchronous HTTP receiver connection in a BPM to send a PO to a business partner. This partner will then respond with a response message or an error message.
Request : messagetype_request
Response : messagetype_response
Fault message: messagetype_fault
Our problem is that a sync HTTP connection apparently does not support the fault messages and therefore the errormessage, based on the messagetype "messagetype_fault" is returned into the responsemessage with messagetype "messagetype_response". This means that we can not perform any manipulation on this message due to the wrong messagetype compared to the content.
Using a switch in the BPM that checks on the existence of an X-path expression we have already splitted branches for the errorhandling and succesfull response handling.
Does anyone have an idea how to change the errormessage that is stuck in the messagetype_repsonse format ?
Thanks in advance !

Hi Stefan,
Thanks for the answer, but this leaves me with the main question how I can change a certain message within a BPM from one messagetype to another. Normally a simple message mapping would do the job but the problem in this case is that the source message does not have the message structure that would be expected by the BPM due to the error message being received in the message that was reserved for the correct response.

Solution found- messages sent but not received

For those that have had the problem of sending texts on your iPhone, but they are not being received at particular numbers, a friend of mine had success with the following procedure:
1. delete all contacts
2. initiate a message to a problem receipient using xxx-xxx-xxxx within messages itself. Do not make a new contact yet. Do not include a 1 as a preface in the number.
3. If successful, choose "add to contacts", and rebuild your "contacts"
Let me know if this works for you.
Jim C

Hello Dom_Guy,
Thank you for the details of the issue you are experiencing with iMessage. I recommend the following steps for the issue you described:
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more abouttroubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up orforward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Thank you for using Apple Support Communities.
Best,
Sheila M.

Monitor XML-Messages sent by the XIF adapter

Hello to everybody,
I am looking for a possibility to monitor all XML-messages that are sent by the XIF Adapter to external servers. I would like to see the detailed XML messages.
Does there exist anything?
Thanks and regards
Michaela

Hi Michaela
XML messages can be sent to the SAP infrastructure where the XML messages can be mapped in to other XML schemata.CRM business connector communication.IDocs should be used:An IDoc transfer is quicker in comparison to SOAP/XML because the IDoc document contains no metadata information(tags)unlike an XML document ,and therefore ,the size of documents sent down line is substainally smaller in comparison.More information about XIF adapter may be found in the SAPNet vai the alias:crm:ci about the external systems.
Cheers

Iphone 5 Picture Messages Sent But Not received

My iphone 5 will send picture messages and say delivered (iMessages) but not received by that person. The person will only get the picture if it was through SMS. I need help on fixing this ASAP

Hello Dom_Guy,
Thank you for the details of the issue you are experiencing with iMessage. I recommend the following steps for the issue you described:
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more abouttroubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up orforward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Thank you for using Apple Support Communities.
Best,
Sheila M.

Monitoring of messages (Out of Box)

Hi Experts,
I have been developing critical interfaces with Legacy systems(MES) with PI7.11. I have question from my team like can we monitor centrally the messages out of box (PI), centrally the messages status in both outbound/inbound scenarios (Asynchronous) with MES using any API functionality. I have refer the BAM functionality, I am not sure how extend it will be fulfill our requirement.
I have searched in SDN and Google, but I am not getting the exact. Please help with your ideas.
Thanks in Advance.
Cheers
Neelagiri's

Hi Florian,
Do you mean Messages sent by HTTP sender?
YOu can monitor messages in SXMB_MONI transaction in the abap stack of the XI system.
Not sure, if you meant anythig else.
Regards,
Ravi

HTTP Receiver with URL Parameters

Hi, I need to pass the following parameters when I do an HTTP post
1. Data
2. DataType
3. Protocol
4. Security
5. DataFormat
Here the Data will have the payload to be sent to HTTP receiver. Can anybody tell me, how I can pass the payload using URL Parameter.

in the HTTP reciever CC
from the help...
- If you want to use URL parameters, select Apply URL Parameters and enter the parameters in the fields Parameter 1 to Parameter 6.
The parameters are included in the HTTP request under the names specified here.
The technical names of the fields are URLParamOne, u2026, URLParamSix
Also check this blog
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III
Edited by: Anand on Oct 15, 2008 8:40 PM

Using HTTP Receive ocation in BizTalk

Hi All,
I want to receive messages by using HTTP Receive location in BizTalk. Below are my steps.
1. Created App pool with .net framework 4 in IIS 7
2. Created virtual directory 'BTSHTTPReceive' with 64bit BTSHTTPReceive.dll with the above app pool in IIS 7
3. Created HTTP receive location in BizTalk with /BTSHTTPReceive/BTSHTTPReceive.dll and started in admin console of BizTalk
Correct me if I am wrong.
Now my question is,
How to send message to HTTP receive location of BizTalk?
Is there any tool to push message to BizTalk via HTTP adapter?
Thanks UK

You need to use post method. however check here what to use based on your requirement.
Also you can set the user authentication/password details in Soap UI.
Before that please go through the sub topics at here to validate if your configuration is correct and make changes if required, be it at IIS level or
at BizTalk host level or at SOAP UI, where ever needed.
Also make sure the account which you are using to post the message has proper access to IIS/Biztalk.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Message sent time problem

i have message sent time problem on my N73
the time is not correct in my message detail whenever i try to check it,note that it is message SENT time not RECEIVE time.however,other phones operate correctly even other brands of nokia like 1110.
please help me how can i get the correct time ?
moreover i iam in iran and set my time for iran

It's a bug that every N73 owners have.
Don't know why they didn't fix this until now, perhaps the didn't noticed this bug yet.
Feel free to hit the KUDOS button if you think I deserved it.........

Edit XML before receiving by Receiving HTTPS Receiver

Hello
I need to connect to target system using HTTPS and I have used a DTD given by the target system.
The target system expects an HTTPS request in an XML format.
This XML shall have a DOCTYPE comment immediately after first line of XML declaration.
Ex:
<?xml version="1.0"?>
<!DOCTYPE method_name PUBLIC "-//method_path" "http://dtd.doamin_name.com/method_name.dtd">
I used Message Mapping to acheive mapping and it failed while testing.
The SXMB_MONI shows that the DOCTYPE is missing and it must be declared.
Is there any way to change the XML message - add the DOCTYPE comment - before the message reaches the HTTPS Receiver?
Please help.
Thx
Alkesh

Hi Srinivas,
This error occurs when the maximum duration of the connection is exceeded than the specified value.
Check this forum:
Error code 402:-ICM_HTTP_TIMEOUT in R/3
Regards,
Supriya.

Help, how to monitor the soap message sent by JAX-WS

Hi,everyone:
I want to monitor the soap message sent by JAX-WS using apache TCPMon.
For example, the JAX-WS is deployed on port 8080 , I make TCPMon listening on port 4444 and send soap request to port 4444 using JAX-WS.
Code in client:
@WebServiceClient(name = "JAX_WS", targetNamespace = "http://www.example.org/JAX_WS/", wsdlLocation = "file:/E:/zwz/EclipseWorkspace/JAX_WSDemo/WebRoot/META-INF/JAX_WS.wsdl")
public class JAXWS_Service extends Service {
     private final static URL JAXWS_WSDL_LOCATION;
     private final static Logger logger = Logger
               .getLogger(demo.client.JAXWS_Service.class.getName());
     static {
          URL url = null;
          try {
               //URL baseUrl;
               //baseUrl = demo.client.JAXWS_Service.class.getResource(".");
               url = new URL("http://localhost:4444/JAX_WSDemo/JAXWSBean");
          } catch (MalformedURLException e) {
               logger
                         .warning("Failed to create URL for the wsdl Location: 'file:/E:/zwz/EclipseWorkspace/JAX_WSDemo/WebRoot/META-INF/JAX_WS.wsdl', retrying as a local file");
               logger.warning(e.getMessage());
          JAXWS_WSDL_LOCATION = url;
     public JAXWS_Service(URL wsdlLocation, QName serviceName) {
          super(wsdlLocation, serviceName);
     public JAXWS_Service() {
          super(JAXWS_WSDL_LOCATION, new QName("http://www.example.org/JAX_WS/","JAXWSBeanService")); //JAX_WS
     @WebEndpoint(name = "JAX_WSPort")
     public JAXWS getJAXWSSOAP() {
          return super.getPort(new QName("http://www.example.org/JAX_WS/","JAX_WSPort"), JAXWS.class); //JAX_WSSOAP
}But i get the exception:
Exception in thread "main" com.sun.xml.internal.ws.wsdl.parser.InaccessibleWSDLException: 2 counts of InaccessibleWSDLException.
java.net.SocketException: Unexpected end of file from server
java.net.SocketException: Unexpected end of file from serverAnd the TCPMon doesn't receive anything.
If i use Axis2, the TCPMon will work fine.
I cannot figure out how to configure the webservices.
Could anyone help me? Thanks a lot.

[http://blog.vinodsingh.com/2007/02/monitor-soap-messages.html|http://blog.vinodsingh.com/2007/02/monitor-soap-messages.html]
Edited by: vinod.singh on 7 Apr, 2009 11:03 AM

My family of four (2 iPhones, 2 iPods) all share the same iTunes account. Many text messages sent to or from mine or my husband's phones are also received on my daughter's iPod, and vice versa. How do I fix this?

How can I keep text messages sent from my or husband's phone from being received on daughter's iPod, and vice versa? We have five devices on one iTunes account - 2 iPhones, 2 iPods and an iPad.

Hello Hrd1977,
This is typically caused by both devices sharing an Apple ID for iMessage and FaceTime. I would recommend signing out of iMessage on your daughter's device. Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out. Then sign in with the desired Apple ID.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers,
Allen

When i send a text message with my new iphone 5 to my wife who is now using my old Iphone 4 we both receive the message. How is this possible? Also she receives all text messages sent to me

when i send a text message with my new iphone 5 to my wife who is now using my old Iphone 4 we both receive the message. How is this possible? Also she receives all text messages sent to me. She obviously has a different phone number and a different provider

See here to create a new apple ID
http://support.apple.com/kb/HE37
good luck

[svn:bz-trunk] 15217: Bug: BLZ-508 - If server receives message for an unknown destination it shouldn ' t include the destination name in the error message sent back to the client .

Revision: 15217
Revision: 15217
Author:   [email protected]
Date:     2010-04-05 03:43:36 -0700 (Mon, 05 Apr 2010)
Log Message:
Bug: BLZ-508 - If server receives message for an unknown destination it shouldn't include the destination name in the error message sent back to the client.
QA: Yes
Doc: No
Checkintests: Pass
Details: Changed the error message to not include destination id. I'm also checking in a few minor fixes I had locally.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-508
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
    blazeds/trunk/modules/core/src/flex/messaging/cluster/JGroupsCluster.java

Thanx Mete, yeah i did...
but i solved it some other way... not entirely sure this was
it though as i was doing a lot of things at once...
it was fds.swc... possibly it was out of date or missing.

HTTP Receiver Adapter: Payload in SXI Monitor

Hi
We have a scenario where System A is sending information by HTTP to SAP XI (No Sender HTTP Adapter required). SAP XI is posting an Idoc in R/3 and sending back two fields to same sender.
We have defined 2 Receiver determination, one for Idoc and another for response for the same sender. Further also seprate mapping program, Interface mapping and Message interface has been defined for them (No BPM is required).
When we are running the test,everything goes successful and the incoming messages has two receivers, the Idoc is posted and also a response is send back to the sender system(which becomes receiver now). I can see successful flag for both of them and further the receiving system also is able to receive the response successfully, but I cannot see the response payload in Monitor for HTTP receiver, it shows the incoming payload and transformed Idoc after mapping, but it does not show the response message for HTTP receiver and only shows the incoming payload.
How can I see the outgoing payload for the same (as HTTP Adapter does not exist on AE) and thus RWB - AE monitoring is not possible. Can someone help me out how to check the outgoing payload for HTTP receiver in Monitor.
System A --> SAP XI --> SAP R/3 (IDoc)
I----
> System A (HTTP Receiver)
BR / Swetank

Hi
I am not bothered about Idoc part. The sender is sending supposing 3 fields
a,b,c. The idoc is posted with those two fields.
And a message is again send to Sender system (Which now becomes receiver) with two fields only (a,b) that we have received this field A( order number). This is not transport acknowledgement, but a payload which is send back.
Separate Mappings have been defined for Idoc and HTTP receiver and my query is that I cannot see the outgoing payload in monitor. Even though on verifying with the receiver system, they receive the actual transformed payload.
So I do I see the outgoing payload in Monitor for HTTP receiver in Monitor ?
BR / Swetank

Monitoring of messages sent by HTTP Receiver

Similar Messages

Maybe you are looking for