Monitoring of Standalone EP 7.0 system in Solution Manager 7.0

Hi Experts,
I need to configure Solution manager 7.0 for monitoring EP 7.0 (Stand alone ) system.
Can you share documents related to configuration of Solution Manager 7.0 for monitoring EP 7.0 system?
Thanks,
Anit

Hi,
EP Monitoring is done by Solution Manager Diagnostics.
Some Basis steps for ref
1. Definition of EP system thru SMSY in solution manager system
2. SMD agent installation in EP system with CCMS ping cofiguration in both solman and EP system
3. Wily Introscope Enterprise manager installation in solution manager system
3. From SMD wizard, you can configure the list of activities to be monitored for a EP system.
For detailed info check SMD installation guide
Regards
KT

Similar Messages

Monitoring a non-SAP satellite system in Solution Manager

Hi Folks,
I have two quick questions.
1.) What is the proper procedure/tool for monitoring a non-NW system in Solution Manager? Should I be able to use sapccmsr and saposcol on these systems?
2.) What is the proper way to connect a non-NW system to the SLD? Should I be able to use saposol and sldreg for these?
Background:
- My Solution Manager system is a NW70 EHP1
- Solution Manager Diagnostics is installed and monitoring my ABAP and Java systems
- I have my CCMS agents registered back to my CEN for the ABAP and Java systems
Satellite systems:
- Multiple Wintel servers (both IA32 and x64) that are running;
o standalone SQL server databases
o BOE/BOBJ
o BPC for Microsoft
Section 4.8 of the Monitoring Setup Guide (CEN SAP Netweaver 7.0 SPS18) states that I should be able to monitor a standalone database.
My confusion isu2026 in the absence of an SAP filesystem (kernel) and the standard SAP environment variables that get set during an install, how do I register the agents? The executables do not want to launch.
Thank you,
Bill

Dear William,
Monitoring of NON-SAP systems is not actually done on the solution manager system itself. The solution manager system gets its feed of alert information from the satellite, specifically CCMS. For SAP systems, alerts from CCMS are set up and activated by default. For Third-Party systems you have to be ablke to set up the interface to feed monitoring information from your non-SAP software to SAP's CCMS infrastructure.
You can get more information on CCMS agents via the website at http://service.sap.com/monitoring.
Go to "system Monitoring and Alert Management" > "Monitoring in Detail".
I hope this information is helpful.
Regards,
Paul

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

Monitor Systems From Solution Manager 4.0

Hi Dear Gurus,
I have recently Instaled SOLMAN 4.0 on windows with Mysql. I have configured the Maintainence optimizer and now its working fiine.
From my organization requirement they want to monitor ERP and BW systems from solution manager.
Can any one please tell me how to start regarding this.
And one more question is i am just wondering Central User Admin is different installation or we have to configure SOLMAN 4.0 to use CUA.
Many thanks for your time.
Kind Regards,
Vamsi.

Hi,
You first need to Setup landscape and create RFCs
[Data Collection|https://websmp109.sap-ag.de/~sapidb/011000358700004860052004E.sim]
[Create Systems|https://websmp109.sap-ag.de/~sapidb/011000358700000894082006E.sim]
[Create RFCs|https://websmp109.sap-ag.de/~sapidb/011000358700002912202006E.sim]
[Assign Logical Components|https://websmp109.sap-ag.de/~sapidb/011000358700002912242006E.sim]
Then Create Solution,
Then Setup Solution Monitoring
[Setup|https://websmp109.sap-ag.de/~sapidb/011000358700006936062005E.sim]
[Monitoring Graphic|https://websmp109.sap-ag.de/~sapidb/011000358700006939872005E.sim]
[Exhaustive very good tutor|https://websmp109.sap-ag.de/~sapidb/011000358700005479192006E.sim]
This will solve your problem.
Feel free to revert back.
--Ragu
Edited by: Raguraman C on Jan 16, 2008 4:31 AM

Add sap R/3 enterprise system in solution manager SLD

Dear All
Required solution manager configuration documents.
We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
And during the installation of solution manager I select u201CConfigure a Local SLD u201C
Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
Who to Configure SLD Bridge ( in SLD Server ) ?
in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
and how to Verify that my system is connected and working fine With SLD
Please help me regarding u201C configuration solution manager u201C
Regards
Shahid

Hi
Visit for step by step details of Standard Configuration of Basic Settings
http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
http://www.wilsonmar.com/sap_solution_manager.htm
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
Regards
Uday

How to remove Production System from Solution manager.

Hi All,
We have Three system landscape and solution manager installed.
All the system are managed by Solution manager.
here we are looking to remove the Production System from Solution manager.
as in case if is there any problem in solution manager then we are not dependent on it.
things will work directly on Production system.
Could you please let us know the procedure to remove the system from solution manager.
Please let us know if is there any document provided by SAP.

Hi,
Have you implemented charm,ccms monitoring or any other functionalities?
if yes,.Delete the sytem from tms domain. and TR route needs to be adjusted, if you are using ccms, remove the agent details from RZ21 also.
Does your production system data coming from SLD?
if yes, Delete the entry from SLD
if both the answer is no.
1.delete RFC from SOLMAN to the production systems.
2. delete the production system using SMT2 transaction.
3. Remove system rom SMSY from SOLMAN.
Thanks,
Jansi

How to add EP(DEV and QAS and PRD systems in solution manager)

Dear Gurus,
I want to include EP dev and qality and prodution systems in solution manager .
While installation of EP(only ASJAVA it is not having ASABAP) i selected solution manager as a Central SLD. But i deleted the systems in solution manger and recreated it again. I created all the systems and datatabae and logical components but in maintenane optimizer it is showing only production system but it is not showing development and quality systems in maintenance optimizer.
How to see developmnet and quality systems in maintenace optimizer.
Same thing for ECC also.
ECC dev and quality systems installed in the same server.
In maintenace optimizer it is showing only dev sysetm it not showing quality sysetm.
Can any body help this probelm.
Thanks & Regards
Rao.

I think you need to adjust your filter settings in the initial screen of MOPZ.
It's in the right top corner.

Add BI System in Solution manager

Hi All,
I need to add BI DEV, BI PRD Systems to solution manager. As per my understanding first i need to create logical systems, after wards i have to add this system in SMSY.
I will be glad if some one can post ur suggestions and procedure to add this
Thanks

Hi,
this is same for all the system. only you have to select appropriate product instance
please refer this screenshots here [SMSY Set Up|http://www.way2sap.com/sap-article/adding-a-sap-system-to-smsy-of-solution-manager-1907/]
get the other set up guides on service.sap.com -> release and upgrade info -> installation and upgrade guide -> SAP components -> SAP Solution Manager -> Operation guides.
Thanks
Jansi

How to add a system into Solution Manager directory.

Hi!
Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
Also,
How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
AM I right?
regards,
Pratip Bhattacharyya

Hi Bratip Bhattacharyya,
SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
Bye
Message was edited by: Riccardo Escher

How to create Rfc for EP system in Solution manager

Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving "   NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhiraj

Hello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                          1
- COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY                 TAGGED
- WBO_REL_REQ_STRATEGY                 MANUAL
For quality and production Java system (target systems):
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                         1
- COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE                       CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ

EP 7 systems in Solution Manager 7 for EWA activation

Dear Expert,
Greetings from Partha.
I need to include our EP 7 systems in Solution Manager 7 for EWA activation. Current lanscape scenario
Solution Manger 7.00 Installed
EP 7.00 Installed
No central SLD configured and all the system have local SLD.
1. As per the installtion guide & SAP notes we need to install
a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
b> Diagnostics Agent in every manged system(s).
For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
--> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
--> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
--> <choose operating system of managed>
Our Solution Manager 7 is already installed and @SPS 17. My question is
1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
If it is different then kindly let me know what are the DVDs to be downloaded and from where?
2. In our Managed System SMD installtion we have decided for
--> Installation Strategy as Direct Solution Manager Registration
But what strategy we should take for SMD installation on Sol Man 7 that is
Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
Help will be appreciated.
Regards,
Partha

1. As per the installtion guide & SAP notes we need to install
a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
b> Diagnostics Agent in every manged system(s).
For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
--> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
--> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
--> <choose operating system of managed>
Our Solution Manager 7 is already installed and @SPS 17. My question is
1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
If it is different then kindly let me know what are the DVDs to be downloaded and from where?
Check the pdf attached in note 1234387 - Inst. 7.1 EhP1 - Diagnostics Agent installation
If you have SP17, you must follow note 1357812 and install Diagnostics Agent 7.01 SR1
2. In our Managed System SMD installtion we have decided for
--> Installation Strategy as Direct Solution Manager Registration
But what strategy we should take for SMD installation on Sol Man 7 that is
Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
It doesn't matter what strategy you'll decide. You could decide Direct Solution Manager registration
3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
As you have solution Manager SP17, you can't install Saphostagent 7.11 and for this reason you can't use SAphostagent.
Agent 7.01 => No Saphostagent
Agent 7.11 => Must install saphostagent
Agent 7.20 => Already have SAPhostagent installed

How to configure satellite system in Solution manager

Hi,
Please advise me how to configure satellite system in solution manager.
Regards,
Asif

Hi,
can you check this installation guides
[ http://service.sap.com/solutionmanager][http://help.sap.com/saphelp_smehp1/helpdata/en/b7/07e4cf1a364a0482e29122c329b7d3/frameset.htm]
Regards,
Muralidhar

Error while Regestring Enterprise portal system in solution manager

Dear Experts ,
recently we installed enterprise portal and now we required to register ep system in solution manager but i tried more and also checke in sdn & other sites but system is showing errors (system does not exist) i think i done mistakes in this process so ..
please give me steps for registering enterprise portel system in solution manager
Regards

Hello Swathi,
First get the EP system registered in the SLD connected to the Solution Manager system.
Then via Landscape Fetch job fetch the system data in SMSY. The system should automatically get created.
What are the errors that you are facing ?
Regards
Amit

How to monitor system from SOLUTION MANAGER?

Hi,
How do I monitor systems and send alerts from solution manager?
Thanks,

Hi Afi C
There are two types of monitoring in Solution Manager.
1. System Monitoring.
2. Business Process Monitoring.
1st one monitor system performance and 2nd one monitor specific jobs or transactions related to important business step based on the configuration.
If you have access to the service market place, you can some information related to above topics.
1. Quick link monitoring. www.service.sap.com/monitoring
   ==>Media library
2. Quick link BPM. www.service.sap.com/bpm
    ==>Media library (Under the technical information, Setup guide business process
          monitoring is goods one !). Same as business process monitoring, you can
          setup system monitoring from t-cd DSWP.
Best Regards
Keiji

How can we monitor IDOCS of managed system from Solution manager .

Hello
Please tell me the steps clearly involved in monitoring IDOC's..
I have created BPM RFC till now ..
Thanku..
Dev

Hi
you need to configure interface monitoring
config guide
https://websmp104.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000258142008E
usage scenario
/people/johannes.fleig/blog/2008/05/25/new-business-process-monitoring-functionalities-in-sap-solution-manager-150-ale-idoc-monitoring
Hope it solved ur prb completely
Regards
Prakhar

Monitoring of Standalone EP 7.0 system in Solution Manager 7.0

Similar Messages

Maybe you are looking for