Monitoring template for hosts and listeners

I've created a monitoring template through "setup -> monitoring template -> create". Under the "policies" tab I am unable to locate some policies for hosts and listeners such as "Listener.ora Permission" and "Open Ports". However, I can see (under policy rules library) that those policies are applied to all targets by default. How do I add those policies into my monitor template?
I am using 10.2.0.4 OEM grid control repository and agents on Sun Solaris 10.
Thx.

Hi,
The Hyper-V guest can be specific the Memory weight and total number of CPU, please first confirm you have set the proper value for the vm workload.
You can refer the following step by step Hyper-V performance troubleshooting steps set the performance monitor:
Performance Management: Monitoring CPU Resources….
http://blogs.technet.com/b/chrisavis/archive/2013/03/25/performance-management-monitoring-cpu-resources.aspx
Monitoring Hyper-V Performance
http://blogs.msdn.com/b/tvoellm/archive/2009/04/23/monitoring-hyper-v-performance.aspx
Measuring Performance on Hyper-V
http://msdn.microsoft.com/en-us/library/cc768535(v=bts.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Certified Monitoring Template for Database Instances?

    I am setting up monitoring templates on OEM 12.1.0.3 for hosts, agents, database instances etc by copying and modifying the Oracle Certified Templates using "Create Like" then apply to my targets.  There are certified templates for hosts and agents but I don't see one for Database Instances.  Is there a certified templates for Database Instances (such as metrics for tablespace used %, share pool caching %, alert etc)?

    There is no Oracle Certified template for database instances. You may want to use default (out-of-box) metric collection settings for database instances as a basis for your template.
    Here is one way:
    - Navigate to Enterprise > Monitoring > Monitoring Templates.
    - Click Create and select a database target, which still has out-of-box (default) metric settings.
    - Continue to create the template.
    Regards,
    - Loc

  • How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
    iWork > Pages
    contenant Templates > My Templates
    comme il y a un dossier
    iWork > Numbers
    contenant Templates > My Templates
    Depuis le Finder, tapez cmd + f
    puis configurez la recherche comme sur cette recopie d'écran.
    puis lancez la recherche.
    Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
    Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
    Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
    Désolé mais je ne répondrai plus avant demain.
    Pour moi il est temps de dormir.
    Yvan KOENIG (VALLAURIS, France)  mercredi 23 janvier 2011 22:39:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • How to create a Templates for Categories and Products In BCC

    Hi All,
    Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
    If possible can any one send the document or where we find in atg docs
    Regards,

    At product/category/sku level there is a property called template.
    Find the property in ACC/BCC and provide all the values including the URL property.
    In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
    <dsp:valueof param="product.template.URL" />
    Using that property with <dsp:include> includes that page.
    Peace
    Shaik

  • System monitoring templates for SP11

    Dear colleagues,
    could anyone please to share system monitoring templates for SP11 like as http://wiki.scn.sap.com/wiki/display/TechOps/SysMon_SupportedProducts?
    Thanks a lot,
    Alexander

    Dear Roland,
    Is it possible to get it for documentation purposes in any way now? For example, export it out of the existing system.
    With best regards,
    Alexander

  • Preferred tools to monitor firewalls for performance and capacity managment

    What is your prefered tool for monitoring firewalls for performance and capacity managment?  We have Cisco's Health and Performance Monitor but it does not provide historcal or trending information.
    Thank you,
    Sara

    Hi,
    There are a few commercial products such as:
    - Cisco Prime
    - Manage Engine
    - Solar Winds
    There are also free products available such as Cacti and OpenNMS.
    Don't forget to rate all posts that are helpful.
    Cheers
    Sean

  • Creation of label templates for waste and dangerous goods

    hi,
    How to create waste and dagerous labels in EH&S. How to create label template. What are the parameters to be maintained in the specification management for a particular substance.
    sathish. R

    Hi,
    Label creation and shipping for DG and waste material is same procedure. In specification master, you need to maintain substance and assign to materials. Using report templates report will be created and released for shipping. reports can be shipped by automatic/manual/sequantial method.
    This is a big process and it is not possible to explain in one mail.
    -ram

  • ADM template for office and AD - Group policy

    Hi,
    I need to enforce English (UK) as the editing language in office application (2010 & 2013).
    I have downloaded the ADM template saved it on C drive on the AD server.
    Then I loaded the ADM template for office to a GOP which I created on test basis and added an AD user to it.
    On the template I enabled the setting for primary editing language as English (UK) .
    on the client side , when I open an office application eg outlook or word, I can still see English (US) as the set language.
    what am I doing wrong ?
    also how do I use the ADMX template ? because when from the GPO editor I try to browse add the its template the window show blank.

    Hi,
    From Windows 2008 R2, the current version of Administrative Template files are ADMX files. The GPMC displays these settings under the Administrative Templates node. 
    However, the GPMC still recognizes ADM files and displays these settings under the Classic Administrative Templates node, which is a child node to Administrative Templates .
    Checkout the below link on installing ADM files,
    Add or Remove Classic Administrative Templates
    Checkout the below on adding the Office 2010 ADMX files in to GPMC,
    Adding the admx files from Office 2010 admin templates into your GPMC
    Regards,
    Gopi
    JiJi
    Technologies

  • Which Web Templates for printing and broadcasting

    Hello,
    we are running NW2004S SP10 with the Portal. We are using the web template 0AnalysisPattern and within this Web Template is a button called Send (for Broadcasting) and another called Print Version (for generating a PDF-Document which can be saved and or printed). This all works from a technical point of view good.
    My question is now how I can change the layout of the PDF-File of the broadcasting PDF and also for the Print Version PDF? I do not know which Web Templates has to be changed. Could anybody please help me and give me this two Web Template names. Normally it should be possible to change within this templates the layout of the generated PDF-File, or am I wrong? I am very confused at the moment and need urgent help.
    Thanks in advance for all help and
    kind regards
    Boris

    The big answer is one you wont like, I suspect, which is that it takes TIME to get to understand the way 0ANALYSIS_PATTERN works, and then to progress to understand how to change it. That process took me several weeks, I started by documenting how the different parts work, I can let you have this document if you like, that will save you about a week.
    Moving on from that, specifically you need to understand how to access the EXPORT command from the Exel and PDF buttons, then you can see the Web TEmplate that is used to control the output. You know, I could tell you in detail (and if you search SDN you will find more detailed answers to your question) but there really is no short cut to understanding how it all works.
    Good luck!
    Patrick

  • Bex Default template for Queries and Workbooks

    Dear All,
    We have a default template for all queries and workbooks.But this default template was created using a AP query and saved as a workbook.Now all the users having AR role are not able to execute queries or workbooks.Since this default template has a AP info provider associated with it.Is it possible convert this default workbook to a generic one without any security restrictions.Please provide a solution.

    In Bex analyzer, you have option to convert a template into a default template.
    Or you can create a copy of the existing template without AP infoproviders and assign it as default template.

  • Dreamweaver template for photoshop and website graphics

    Hi everyone i am new on the boards and having  a nose around i am lookin for help to change my current site. at www.topgun-graphics.co.uk and im lookin for a site layout were i can just have images and text mainly and some areas for tutorials and links. here is a site i have seen that i like the look off and wondered if anyone could help point me in direction thanks this site i am gonna be spending a  lot of time here. the site link for the template i like is a yotube video and about 2o seconds in is the layout i like

    I have no experience with this one, but the following is on the support page
    http://www.simpleviewer.net/simpleviewer/support/
    Common Terms
    The following terms are used frequently in this documentation:
    Gallery Folder - this is the folder that contains the index.html file, gallery.xml file, gallery images and thumbnails and the svcore folder. To publish your gallery, upload the gallery folder to your website.
    Config Options - a list of options that describes a gallery's behavior. Contained in the gallery.xml file. View config option descriptions here.
    gallery.xml - this document  describes how your gallery behaves. It contains gallery  config options  as well as image and caption data. An XML file is a simple text file that can be edited in any text editor.
    Local Gallery - a gallery that loads images and thumbnails from the gallery folder. Image information and captions are specified in the gallery.xml file.
    Flickr Gallery - a gallery that loads images, thumbnails and text from Flickr.
    svCore - this folder contained in the gallery folder, contains all the core files required by the SimpleViewer gallery.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Template for picturesize and order

    Hi there,
    several times a week I have to paste microscopy fotos into a powerpointpresentation and have to resize them, that they have all the same size and then print that sheet out.
    I would love to have a template for maybe 8/12/16 pictures, so that I just can drag and drop them onto that sheet, and it would be resized automatically to that size I wanted to. Like little boxes, all the same size and all in file.
    The pictutes do need all a little textbox under the pictures and one single headline.
    Im totally new to Illustrator and don't know how to create such boxes. Is it possible to do so?
    best wishes

    to expand on what Wade said,
    The OP did not mention what version of illustrator he/she has. Previous to CS4 the contact sheet option is in photoshop. CS4 and above it is in Bridge.and will generate a pdf file. The resulting pdf file is editable in Illustrator.

  • Visual Upgrade to 2013 - Missing Site Templates for ITTEAM and PROJSING

    I've been working on Upgrading some old WSS 3 sites to SharePoint 2013.   I Have been able to get all of them imported to SharePoint 2010,and then have imported them all to my Sharepoint 2013 server. Now at the to of all of my sites is the  Experience
    all that SharePoint 2013 has to offer. Start
    now or Remind
    me later tag line.  I Click the Start Now option and it goes though its Checks and comes back with:
    Missing Site Templates
    The following sites are using templates that are not yet supported after upgrade:
    http://<site>/it/Projects - ITTEAM#0
    http://<site>/it/webservices - PROJSING#0
    I understand that those Fab 40 Templates are no longer available to create in 2013, though what can I do with the Existing content that I have? Seems wrong to Leave it at the 2010 Visual Representation. 
    For this one Sharepoint Site I could recreate the 2 Webs. Though on another Sharepoint site there are 123 sub sites with the sa,e two templates. I can't Abandon them.  Is there a way to convert them to a new template first?  How can I do the Upgrade
    and keep my content? If I have to use a new template for new sin sites, I'm fine, I just don't want to lose what I have.
    Thanks!

    Hi  Scooter,
    For upgrading Windows SharePoint Services 3.0 to SharePoint 2013, you can refer to the steps as below:
    1.First upgrade:
    Upgrade the content to Microsoft Office SharePoint Server 2007
    http://www.fpweb.net/support/microsoft-sharepoint/tutorials/wss-to-moss-migration/
    2.
    Second upgrade: Upgrade the content to SharePoint Server 2010 Products
    If your environment is SharePoint 2007 32 bit, you need to upgrade your SharePoint 2007 32 bit to SharePoint 2007 64 bit firstly.
    http://bhavinsharepoint.wordpress.com/2011/09/07/step-by-step-migration-from-moss-2007-to-sharepoint-2010/
    http://badarinathanagaraja.wordpress.com/2010/06/11/upgrade-from-sharepoint-2007-to-sharepoint-2010-environment/
    3.
    Third upgrade: Upgrade the content to SharePoint Server 2013 Products.
    http://technet.microsoft.com/en-us/library/cc262483.aspx
    http://epmsource.com/2013/05/02/migrating-ps-2010-to-ps-2013-walkthrough/
    Reference:
    http://blogs.technet.com/b/praveenh/archive/2013/10/31/upgrading-from-wss-2-0-to-sharepoint-2013.aspx
    http://technet.microsoft.com/en-us/library/ee947141.aspx
    Also make sure you are upgrading to SharePoint 2013 Standard or Enterprise edition for your site templates working. You can have a look at the thread:
    http://social.technet.microsoft.com/Forums/en-US/caeb109b-f62b-4898-b84d-68f2f9feb872/site-templates-missing-in-sharepoint-2013-foundations?forum=sharepointadmin
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • Creating an offline PDF template for upload and submit

    Hi Gurus,
    I'm very new to Adobe Interactive forms and will need your advise.
    From the tutorials, when we create a offline PDF application that can upload a PDF for submission, we were always given the sample template PDF file provided by the tutorial. (travelrequest.pdf)
    Now I need to create my own offline PDF template by myself so I can integrate to my WD program to include uploading the offline PDF template and submitting to backend.
    the offline PDF must be editable and save via acrobat reader.
    Any further notes or documentations that I can follow up to? Cos most of the doc I found doesn't teach me how to go about creating the PDF template for offline use in the first place...only the backend and WD integration which I already know.
    Please help! Thanks!
    ps: points will be generously awarded to answers.
    Regards,
    Jansen

    Hi Jansen,
    As far as I know the WAS 620 only supports to output your Forms and Scripts to PDF Format but they are not interactive.
    The Adobe Interactive Forms Solution is only available from WAS 640. You can design your forms either in ABAP transaction SFP or in NWDS(Netweaver Developer Studio) Form Designer.
    For craeting forms in WD ABAP, have a look at the links below:
    SAP Interactive Forms by Adobe
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm
    Web Dynpro ABAP
    http://help.sap.com/saphelp_nw2004s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
    regards,
    harman

  • Templates for charts and other objects

    Hi, new to this group, and a newbie to Macs, too.
    When I do my own presentations, not relying on the templates of Keynote, I notice that when I insert a chart or any object, it looks so, what's the word? so bland and even unattractive.
    So kindly allow me three questions:
    First, how do I access the nice-looking charts and objects of the Keynote templates without having to open one up and cutting and pasting them on my presentation?
    Second, where do I find the textures that the chart templates use for background? In which folder are they stored?
    And third, which is, I suppose, a frequent plea, where can one find other templates? The ones available on the Internet aren't as well-composed as the bundled ones.
    Thanks in advance.

    1. You can't, the chart settings are built into each theme, there's no way to get them without opening a theme. One thing you COULD do though, is make a bunch of cool charts, and copy and paste them into a "holding" file that you open when you need it. Then you won't have to constantly make an empty file, create a table and copy and paste it. The other alternative, especially if you like one particular style and will likely use it most of the time, is to lock in the table style to your own file once you've used it on your own slide once. You can find that function under the Advanced menu.
    2. They aren't stored in a folder. With Keynote 1, Apple did provide you with a .key file that had chips of color or texture in it, but now they don't. You could create your own by making a bunch of objects, and then using the Copy Style functions in Keynote to copy the style of say, a colored bar in a chart, onto say, a square you just made in your new file.
    As for the templates found on the web being not as well composed as the Apple one's, I beg to differ. Have you seen Keynotepro or keynotethemepark? My stuff (Keynoteuser.com) isn't as snazzy or artistic (though I think it's more usefull in most cases for the business world than many of the Apple templates) the stuff the other sites are doing is up there in quality to Apple's. Keynotepro especially is churning out stuff that in my opinion is better than Apple's.

Maybe you are looking for