Monitoring two servers with same IIS configuration using SCOM

Hello,
We have two servers which has the same IIS configuration including sites names, how do we configure APM to monitor and get events captured on two different monitors on SCOM 2012 R2.
Thank you, Anand
Anand Franklin

Hi Anand,
There is no problem at all, if applications IIS paths (Web Site names + Web application name in IIS) absolutely match. Make sure both servers have SCOM Agent installed and connected to the same Management Group.
In .NET Application Performance Monitoring template just keep Target Group field blank (it's blank by default) - that will mean the application will be monitored on each server within Management Group where it's discovered. The same configuration of
APM monitoring will be used for all app instances.
If you want to monitor the app only on two servers, and at the same time the app is hosted on more than these two boxes, you can create Windows Computer group populated with appropriate servers and specify this group as Target for APM monitoring.
If you want to differentiate APM configuration for specific app instances, you should create several Windows Computer groups and bind each group with separate configuration - in this case you will have to run .NET Application Monitoring template several
times, picking up the same app, but changing APM settings and setting new Target Group.
Igor Savchenko, VIAcode Consulting LLC (http://www.viacode.com/)

Similar Messages

Unable to monitor two databases with same name on two different hosts

I have got two databases with same name on two different hosts. I added one database to the list of monitored databases. Now If I try to add the other one , I get the message that the database is already being managed.
Can't we monitor two databases with same name on two different hosts?

you can... while saving the target,give a different name.. for eg target-2

Installing oracle10g on two servers with same databae

Dear DBAs
I have two servers and one SCSI SATA box as storage device which i have configured in RAID5 format. Servers are connected to channel 0 and 1 of the SATA box respectively.My OS is RHEL ES-4
I want to install Oracle10g on these two machines with SATA box as the Databse Storage medium. I donot want to use RAC as my clients donot have DBA. The servers has to be configured in a failsafe method.

hi gert
the SATA SCSI box is LSI Logic Megaraid sas 8408E. My aim is to have a backup server which needs to be switched on once the main server fails. I can afford for a little bit data loss. Only thing is the backup server should use the data files of the crashed server.

Can two people with their own iPhones use the same computer and iTunes?

Can two people with their own iPhones use the same computer and iTunes?

Yes. My wife and I each have our own Apple ID and used the same computer to sync our phones with iTunes. The best way to do this is set up separate user accounts on the computer. If you are logged in to your account on the computer and your wife wants to sync here phone, you would log out and she would log in. These keeps all your stuff separate and avoids a ton of confusion.

Two methods with same name but different return type?

Can I have two methods with same name but different return type in Java? I used to do this in C++ (method overloading or function overloading)
Here is my code:
import java.io.*;
public class Test{
public static void main(String ar[]){
try{
//I give an invalid file name to throw IO error.
File file = new File("c:/invalid file name becasue of spaces");
FileWriter writer = new FileWriter(file ,true);
writer.write("Test");
writer.close();
} catch (IOException IOe){
     System.out.println("Failure");
//call first method - displays stack trace on screen
     showerr(NPe);
//call second method - returns stack trace as string
        String msg = showerr(NPe);
        System.out.println(msg);
} // end of main
public static void showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     String stackTrace = sw.toString();
     System.out.println("Null Ptr\n" + stackTrace );
}//end of first showerr
public static String showerr(Exception e){
     StringWriter sw = new StringWriter();
     PrintWriter pw = new PrintWriter(sw);
     e.printStackTrace(pw);
     try{
     pw.close();
     sw.close();
     catch (IOException IOe){
     IOe.printStackTrace();
     return sw.toString();
}//end of second showerr
} // end of class
[\code]

Overloading is when you have multiple methods that have the same name and the same return type but take different parameters. See example
public class Overloader {
     public String buildError(Exception e){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( e.getClass().getName() )
               .append( " : " )
               .append( e.getMessage() ) ;
          return buffer.toString() ;
     public String buildError(String msg){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( msg ) ;
          return buffer.toString() ;
     public String buildErrors(int errCount){
          java.util.Date now = new java.util.Date() ;
          java.text.DateFormat format = java.text.DateFormat.getInstance() ;
          StringBuffer buffer = new StringBuffer() ;
          buffer.append(format.format(now))
               .append( " : " )
               .append( "There have been " )
               .append( errCount )
               .append( " errors encountered.") ;
          return buffer.toString() ;
}Make sense ???
Regards,

Two idocs with same idoc number in idx5

We are using an idoc to file scenario where idocs are bundled using bpm and posted to ftp. here the issue is we are getting two idocs with same idoc number in idx5. due to which the file in ftp is getting overwritten.
Could anyone suggest me what to do in this regard.

Hi,
>>>check your sender system is sending same IDoc twice ?
if you send the same IDOC twice they both get different numbers as IDOC number is taken from the IDOC num range
unless you're able to send the same IDOC twice with the same IDOC num somehow
Regards,
Michal Krawczyk

Two account with same UPN in Active Directory

Is it possible to have two accounts with same UPN in AD?
I'm using Windows Server 2012 R2

To expand on what Mr X said. Active Directory allows you to assign just about anything to the userPrincipalName attribute, as long as the value is unique. The value of this attribute is generally referred to as the UPN. But you could assign values with no
"@" symbol, for example, or more than one "@" symbol. Also, Active Directory does not require that any value be assigned. It is an optional attribute.
If no value is assigned to the userPrincipalName attribute, then the user can use a "default" UPN, which is <sAMAccountName>@<DNS domain name>, where <sAMAccountName> is the "pre-Windows 2000 logon" name of the user
(the value of the sAMAccountName attribute), and <DNS domain name> is the DNS name of the domain.
If a user has a value assigned to userPrincipalName that does not match this "default" form, then they can logon with either UPN, as long as no one else has either value assigned to their userPrincipalName attribute. You will note that Active
Directory enforces uniqueness in the domain on sAMAccountName values.
If in domain "domain.com" a user has a sAMAccountName of "jsmith" but userPrincipalName "[email protected]", then another user can have userPrincipalName of "[email protected]" (as long as no one else
has that value assigned to userPrincipalName). They can each logon with their assigned values for userPrincipalName. But the first user can no longer also logon with their "default" value, based on their sAMAccountName, because it is now
used by someone else. But if you attempt to assign a value to userPrincipalName that is also assigned to another user, you get an error.
Bottom line, only one person can logon with any given UPN.
Richard Mueller - MVP Directory Services

Two records with same key (Infocube)

Hi,
I was trying to do, in a update rule, an "IF" condition with two key figures.
IF Kf1 > Kf2. result = Kf1 else result = Kf2.
But the data in the source (datamart Infocube to infocube) have tow records with the same characteristics combination (the same keys)and different amount in the keyfigures, then the result of my "if" condition is not the expected because I understood in the infocube only exists one characteristics combination. :S
I was seeing those records in the manage transaction of the infocube.
Some reason for this?
Thanks and regards
Victoria Leó

This can happen with parallel loads. Two rows with same set of Char values but in different packets of the same Request, being loaded at the same time.
It really shouldn't be an issue - your update rule will make the KF change as desired. Your queries aggregate KFs based characteristic values, not Dim IDs, so you'll get the totals you expect.
Here's some more info:
There is an RSRV Test that lets you check a dimension for a cube to see if multiple DIM IDs exist for the same combination of Chars - <b>Multiple Entries in Dimensions of a (Basis) InfoCube</b>
Output looks like:
12:02:24 o'clock on 08/25/2006: Start test run for user PIZZAMAN:)
Dimension ZFM_C521: DIMID 61,215 and 61,214 have same characteristic values
Dimension ZFM_C521: DIMID 61,880 and 61,879 have same characteristic values
Dimension ZFM_C521: DIMID 61,366 and 61,365 have same characteristic values
Dimension ZFM_C521: DIMID 61,368 and 61,367 have same characteristic values
12:02:24 on 08/25/2006: Test run for user PIZZAMAN:) completed
You can run the Correct Error option to have it update fact rows to use one of the DimIDs if you want, but unless you have lots of them, I even wouldn't bother.
Here's the description of the test:
<u>Description</u>
This elementary test recognizes whether there are several lines that have different DIMIDs(dimension table key), but have the same SIDs for the selected dimension table for the InfoCube specified. (This can occur by using parallel loading jobs). This has nothing to do with an inconsistency. However, unnecessary storage space is occupied in the database.
<u>Repairs</u>
Since the different DIMIDs with the same SIDs are normally used in the fact tables, they cannot simply be deleted. Therefore, all of the different DIMIDS in the fact tables are replaced by one DIMID that is randomly selected from the equivalent ones. Before a change can be made to the database, the consent of the user is requested.
DIMIDs that have become unnecessary are deleted in the connection. In doing so, not only are the DIMDs deleted that were released in the first part of the repair, but so are all of those that are no longer used in the fact tables (including aggregates). The consent of the user is again requested before this change is made.

Two Switches with same MAC+Priority running STP

Hi
what will happen if two switch with same MAC-ADDRESS and same STP priority will run STP , how will elect to the root bridge ???? how the STP process will handle this situation?
thanx

Well, first off, no two switches (or switchports) will have the same MAC (if they do, you're buying switches from the wrong, very bad place).
Every port of the switch will have (at least) one MAC of it's own.
Given the same priority for all switches/bridges on the LAN, the lowest switch/bridge MAC on the LAN will win as the root.
VLANS take on the MAC of the administrative interface ("CPU"): i.e., xxxx.xxxx.5000, the first port (i.e., fa0/1) is xxxx.xxxx.5001, the second (fa0/2) is xxx.xxxx.5002, and so on
If you do a "show interface", the MAC / bia is displayed in the second line.
Good Luck
Scott

How to calculate any two date with diffence calculation by using obiee11g?

Hi,
i have a requirement like,
location wise current month and previous month with movement calculation,can to tell me how to calculate any two date with diffence calculation
by using obiee11g
Note,
I tried to implemented ago function as well as dynamic two dates calculation using $2-$1 methods..but i am getting the o/p it's self i am getiing some null value also that' why it's not tallying with our actual report.
i tired to used ifnull(mesaurecolumn,0) also case condition on the mesaure colution still it's not tallying.
THanks and Rds,
Devarasu.R

Hi,
for Date Difference........
TimestampDiff(interval, timestamp1, timestamp2)
ex:TimestampDiff(SQL_TSI_DAY, cast('1-apr-2011' as date), current_date)
Where:
interval
The specified interval. Valid values are: SQL_TSI_SECOND, SQL_TSI_MINUTE, SQL_TSI_HOUR, SQL_TSI_DAY,
SQL_TSI_WEEK, SQL_TSI_MONTH, SQL_TSI_QUARTER, SQL_TSI_YEAR.
Cheers,
Aravind

Two Desgination with same departmens in Table

I HAVE A SCANERI THAT THER IS DEFAULT ADMIN IN TABLE AND THIS ADMIN ADD FURHTER SUPERVIOSR,MANAGERS AND SENIOR MANAGERS THEN WHEN ADMIN FIRST TIME LOGIN AND CREATE ACCOUNTS OF SUPERVISOR,MANAGER,DIRECTOR
AND HERE IS THE TABLE
UserID UserName Password UserTypeID DepID FullName CreateDate DocID Email PhoneNumber DesigID
51 Noreen Fatima 2 NULL NULL 2014-02-04 NULL [email protected] 324234234 4
52 Admin Docum 1 NULL NULL NULL NULL NULL 3
53 Sundus Khan 1 2 NULL 2014-02-04 NULL [email protected] 031545646456 1
54 Hira Mansoor 1 2 NULL 2014-02-04 NULL [email protected] 0315546464 2
55 Sana Khan 1 2 NULL 2014-02-04 NULL [email protected] 2043829429304 3
56 sundus sundus 1 2 NULL 2014-02-04 NULL [email protected] 87687678678 1
here depid 2 is computer science and design id 1=supervsior 2=manager 3=senior manager 4=basic user
so when admin login and want to create again account of supervsior and their department is computer sciecne . . now there this is not a logic
beacuse supervsior account with department omputer science already exist so why admin create another supervsior with same department
i use this sp but this shows me error
ALTER procedure [dbo].[spadminreg]
@UserName nvarchar(50),
@Password nvarchar(50),
@UserTypeID int,
@DepID int,
@DesigID int,
@emailaddress nvarchar(50),
@PhoneNumber nvarchar(50)
as
if EXISTS(SELECT 1 from Designation where DesigID=@DepID)
begin
select @DesigID as 'SuperVisor'
end
else if(select 2 from Designation where DesigID=@DesigID)
begin
select @DesigID as 'Manager'
end
else if(select 3 from Designation where DesigID=@DesigID)
begin
select @DesigID as 'Senior Manager'
end
else if
insert into [Userss](UserName,Password,UserTypeID,DepID,CreateDate,DesigID,Email ,PhoneNumber)
values
(@UserName,@Password,@UserTypeID,@DepID,GETDATE(),@DesigID,@emailaddress,@PhoneNumber)
error
Msg 4145, Level 15, State 1, Procedure spadminreg, Line 19
An expression of non-boolean type specified in a context where a condition is expected, near 'begin'.
Msg 156, Level 15, State 1, Procedure spadminreg, Line 22
Incorrect syntax near the keyword 'else'.
Msg 4145, Level 15, State 1, Procedure spadminreg, Line 23
An expression of non-boolean type specified in a context where a condition is expected, near 'begin'.
Msg 156, Level 15, State 1, Procedure spadminreg, Line 26
Incorrect syntax near the keyword 'else'.
please help meee i will very thankful

else if EXISTS (select 2 from Designation where DesigID=@DesigID)
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Two servers with redundant connections for Sun StorEdge 3320 SCSI arrays

Hello All,
I read in the "Sun StorEdge 3000 Family Installation, Operation and Service Manual" that it's possible to setup "two servers with redundant connections" but I never see a detailed schema to do this. I read also the "Best Pratices Guide" but this case is not mentioned. Is it really possible ?
My objective is to split a Sun StoreEdge 3320 SCSI array between two hosts with dual redundant scsi connection.
Thanks in advance for your answers.
Francois.

At first this sounded easy, but looking at the parts listing for the 3320 seems to indicate otherwise. They're listing different part numbers for the chassis and midplane...
371-0105 chassis & midplane for JBOD
371-0106 chassis & midplane for RAID array
There are also different part numbers for the I/O boards....
370-7655 RAID SCSI I/O module
370-7713 JBOD SCSI I/O module
I can see what the difference is between the I/O modules, but am unsure of what differences if any are in the chassis and midplane. Seems like there's more involved here than what it would be worth to try and make it work. Perhaps the cost of a second HBA would be the lesser of two evils..........

Struts- two actions with same path in struts config

hai
I am having html:select tag with two options (View And Download) in a form.My form signature is like <html:form action="select">.I mapped two options(View,Download) with same action path.When i click view it doesn't forwards(remains idle) and no error is shown.But i click download it forwards to the appropriate page.If iam having two tags with same action path the second is only working.This problem doesn't comes when iam having one tag alone.
My code is here:
-----------Select.jsp----------------
<html:form action="Select">
<html:select property="id">
<html:option value="view">View</html:option>
<html:option value="download">Download</html:option>
</html:select>
</html:form>
----------------Struts-config.xml------------
<form-beans>
<form-bean name="viewForm" type="ViewForm"/>
<form-bean name="download" type="DownloadForm"/>
</form-beans>
<action-mappings>
<action path="/Select"
name="viewForm"
type="ViewAction"
input="/Select.jsp">
<forward name="success" path="/Success.jsp"/>
</action>
<action path="/Select"
name="downloadForm"
type="DownloadAction"
input="/Select.jsp">
<forward name="success" path="/Welcome.jsp"/>
</action>
</action-mappings>
Can i have action tag with same paths like this.If not please provide me a solution

I have created two success pages.
I have created two findForward in my ActionClasspublic ActionForward execute(ActionMapping mapping,...............)
if(a==view)
return mapping.findForward("success");
else
return mapping.findForward("success1");
----------------Struts-config.xml------------
<form-beans>
<form-bean name="viewdownloadForm" type="ViewdownloadForm"/>
</form-beans>
<action-mappings>
<action path="/Select"
name="viewdownloadForm"
type="ViewdownloadAction"
input="/Select.jsp">
<forward name="success" path="/Success.jsp"/>
<forward name="success1" path="/Success1.jsp"/>
</action>

[svn:bz-trunk] 19333: Rewrite these two tests with MXUnitManager instead of using tags.

Revision: 19333
Revision: 19333
Author:   [email protected]
Date:     2010-12-13 13:31:42 -0800 (Mon, 13 Dec 2010)
Log Message:
Rewrite these two tests with MXUnitManager instead of using tags.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/amf/in heritPropsTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/http/i nheritPropsTest.mxml

Hi Stephan,
this solved placing both animation on one page. Make sure all your fonts are called out in the <head> section like for example:
<script>var __adobewebfontsappname__="dreamweaver"</script>
<script src="http://use.edgefonts.net/quicksand:n3,n4:default.js" type="text/javascript"></script>
Dreamweaver does this automatic for you. If you are having a font conflict I recommend under command (if you are using dreamweaver)
Clean up the font Tag and add only the ones that you are using again, sometimes they accumulate.
Good Luck.

How to separate two contact with same name

Hi, anyone knows how to separate two contacts with same name in Contacts? Actually they are two persons from two gmail contacts with same name but different contact numbers, different emails....etc, but Contacts assume they are same person and merge them as one!

FG,
In Lion, you have the File > Duplicate option. You will then have two copies of your document open, and the one on top will have the temporary filename "OriginalFileName copy", and your next responsibility is to File > Save (or Command-S) and rename the duplicate. At this point, you edit the copy's name, to perhaps ...copy 1, or whatever you wish. The document you had open when you initiated the File > Duplicate will still be there on your screen, waiting for you to Close it or continue editing.
Jerry

Monitoring two servers with same IIS configuration using SCOM

Similar Messages

Maybe you are looking for