Monster iezclick does not work with iPad 3

I am trying to use monster iezclick to remote control my iPad 3.
It does not work and volume just stop.
It does work with old generation iPods.
Any idea what is wrong ?

Apple Support Communities Terms of Use
2. Submissions
Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
Speculations or rumors about unannounced products.
Discussions of Apple policies or procedures or speculation on Apple decisions.

Similar Messages

My website does not work with Ipad

I have made a website with dreamwaver CS 5,5 and everything working just fine, but on a Ipad it is sometime problem to open page in the drop meny? Is there anybody who can tell me why it is so? is there any solution ?
Greatful for answers
Mats

We would need to see your page to give you an exact answer, but many times, in the older versions of DW, this is caused by using the Spry menu system. Spry was dropped by Adobe in 2012 because it was showing its age and didn't work all that well with touch devices.
You may need to replace your menu system with something a bit for mobile friendly like a jQuery menu system or a pure CSS menu. There are many, many free options available for both of those online if you do a Google search, but if you're not used to doing any kind of coding, purchasing the Menu Magic extension from Project VII may be the way to go.

ITunes photo synchronization does not work with iPad

Hello,
I have an iPad and wanted to synchronize pictures on it. When I enable synchronization of pictures in iTunes and choose a folder and synchronize afterwards the synch finishes after 3 secounds and nothing happens.
I have an iPhone 3GS as well and there it works properly.
I tryed it with FW 3.2.2 on iTunes 9.2 and now I updated all to FW 4.2.1 and iTunes 10.1.1.4 but the problem still exists.
I deleted the picture cache from the folder (solution from another forum - same problem on a mac) but it doesnt change anything.
I know how to use the synchronization from my iPhone. I hope someone knows the problem and have a solution for it?
Thanks
Nuerre

Meg St._Clair wrote:
charnik wrote:
The question is the following: Is it possible to have the screensaver display the artwork, when the music library is unmounted?
Based on the set up you describe, no.
Most of the times, such categorical answers are proved wrong.
Here is what solved my issue: I signed in iTunes Store (it's sad that a credit card is required for that) and then downloaded the Album art work from inside the iTunes application. Next time i had the external drive unmounted, when the screensaver went on it showed the album artworks like a charm.
So, my piece of advice for those that do not want to sign in iTunes Store is to copy the contents of the Cache directory (located under ~/Music/iTunes/Album Artwork) into the Download directory (located under ~/Music/iTunes/Album Artwork again). I haven't tested, but it could work.
Message was edited by: charnik
Message was edited by: charnik

Polarioid pogo printer not working with ipad and iphone

And I can not believe how that truly *****... I am traveling through the states and bought the pogo to print on the road... Only to find out that it does not work with ipad and does not work with iphone... Unless I jailbreak my phone which I don't really want to do...
Apple wants us to go mobile and clouding and all those things, yet, when we do go mobile and try a mobile life style, we are encountering so much technical crap that we loose the will to live...
I could have spend the hundred dollar for the pogo to have pics printed out in every kiosk in the country...
WWhen is Apple going to come to its senses about little life savers like the pogo and bluetooth???????
Is anyone aware of a work around so I can print on the go? And a solution that does not involve a programmers brain because my single braincell is not working while traveling... It needs to be easy!

To cut through all the rage and anger and "knowing" who wanted what, the Pogo has been out for a year or so, well before Mr. Jobs' passing, and Apple did not make any mention of supporting printing on anything other than Airprint compatible printers.
Since Airprint is a Wi-Fi/ethernet thing, Polaroid would have to make a significant redesign to the Pogo. Considering that the first iPhones only supported Bluetooth headsets and Apple didn't provide any indications about increasing Bluetooth support, Polaroid's decision for the Pogo to be Bluetooth was obviously not with iOS devices in mind. This is why initially Polaroid had links on the FAQ to tell Apple to add Bluetooth printing support (so that in effect, asking Apple to pay for the expenses to make the iPhone compatible with the Pogo, rather than Polaroid paying to make the Pogo compatible with iOS.)
I come from a photograpic background. I got the Pogo as soon as it came out. I quite literally was on Polaroid's website every day checking to see when I could order it. Having "instant" sticker prints is wonderful at family picnics with all the kids. While it would be great to be able to get Pogo prints from anyone's iPhone, I stopped holding my breath when Apple announced Airprint, which came well after the Pogo was released. So I took that as the sign that it was probably never going to happen. (I knew that the Pogo wasn't iOS compatible when I bought it so not having compatiblity is not a deal-breaker for me. But, yes, it would be nice.)
I now use a Polaroid Z340 since it's a 14 megapixel camera that prints larger 3x4 Zink prints. Polaroid makes the GL10, which is basically a Pogo using the same printer as the Z340. But it's still Bluetooth only. So while I sympathize with the desire to have a really compact portable printer like the Pogo, iOS compatibility just does not seem to be on the horizon. IMHO, it would be more realistic that Polaroid create an app to do Bluetooth printing. But considering Polaroid's financial issues, I'm not holding my breath

AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well

AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well.
WLAN is working, I can use Youtube on my AppleTV, but I can´t connect to my computer or use airplay on my iPhone or iPad.

Something is not configured correctly that is creating issues with your AppleTV. You can disconnect it from the TV and power, and then plug it into your computer with a micro-USB cable. After launching iTunes on your computer, you will be able to restore it to default settings and upgrade the software.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

IPhone (3,3G,4) does not work with Apple Universal Dock.

I have a 3rd generation iPod Touch that has been upgraded to iOS 4. My iPod Touch will no longer sync via the Apple Universal Dock. Also, my new iPhone 4 also will not sync via the Apple Universal Dock.

Trust a geek not to give up. I decided to get to the bottom of the "iOS device does not work with the Apple Universal Dock" problem. I noticed that the iPhone 4 and iPad came with slightly different USB-Dock adapter cables. I wondered if that might be the issue. My Apple Universal Dock was connected to my Mac via the original dock adapter cables which are slightly larger. I connected the newer cables between the Mac and the Apple Universal Dock and .... voila! Both the iPod Touch with iOS 4 and the iPhone can now connect via the Apple Universal Dock. Apple changed something in the way the adapter cables function.
Of course I still have the problem with the car head unit dock adapter ... Sigh. I'll have to call Best Buy ( uughh! ) and find out if they'll do the update for me. The were the vendor authorized installer.

It does not work with sync between Outlook

It does not work with sync between Outlook, Exchange and iPhone.
Writing something into the iPhone so it will in the PC calendar and put up in telefoen. After a while, it disappears from the iPhone but is still on the computer. The same goes for the iPad. Seems to have arisen after the last update as a security measure was around May 25 -13.

Suggest turning off and deleting the Exchange account and adding it back again. Appears there is a communications problem between the two.

Does SIRI work with Ipad 3

Does Siri work with Ipad 3

Apple Support Communities Terms of Use
2. Submissions
Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
Speculations or rumors about unannounced products.
Discussions of Apple policies or procedures or speculation on Apple decisions.

My passcode is working to unlock the screen but does not work with restriction passcode. Should they be different?

My passcode is working to unlock the screen but does not work with restriction passcode.
Tried it several times but it did not work, though i can use the phone and all features even after 13 failed attempts.
Should restriction passcode be different from what i set?

There is no default restriction password. If you didn't set it someone else may have. If you can't find it then you may have to follow the steps here:
Forgot passcode for your iPhone, iPad, or iPod touch, or ...
Do you have a backup which might not have this restriction passcode? If so restore to that backup?

Liquid Layout does not work with extreme long pages

(Solution at the end)
Hi there.
I have a layout for iPad with a width of 1024 and variable height.
I now need an alternative layout for iPad HD. So I try to use liquid layout to alternate my layout to 2048 width and height x 2.
The maximum size in InDesign is 15552px. So I managed to get all my SD layouts below 7776px.
to sum things up:
iPad SD: 1024x7776
transform into
iPad HD: 2048x15552
Problem is, in this case the option to scale everything automatically gets completely ignored.
Another layout, which uses only text and no images, boxes or multimedia gets transformed correctly.
Does anybody have a tip for me how I can work around it?
Thanks in advance.
p.s.: Adobe, please increase the maximum sizes for documents
Solution:
Aaaand I just got it. Specify a new preset for your document-sizes: 2048x15552. Now if you use the page tool just click the new (in my case) "iPad HD" and choose liquid layout: scale.
Works like a charm

I am using Automator to find files with the .pages
extension and then copy them to another folder, which
lists the copied Pages files by name but with Zero
KB! The files will not open - error: the index.xml
file is missing.
Any ideas on how to get a Pages file to copy with
Automator?
Hi Kurt
To answer the title of your message: no, Pages does not work with Automator.
But that's not really what you're asking. You really want to know how to copy Pages documents using Automator.
To help you we need to know what Actions you're using in Automator and the parameters you're using eg the Filter Finder Items action (using a pages file extension) and the Copy Finder Items actions. Pls let us know how you're doing this and we'll try to help.
Thanks.

Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

Julien-
I have the Apple MC184LL/A Bluetooth Wireless Keyboard. The brigtness control works with mine, as do most of the other functions.
Try cycling the keyboard off and on. Hold the power button until the green LED goes out. Then press it one more time to turn it back on.
You might try resetting the iPad's network. Go to Settings-General-Reset-Reset Network Settings. Then you may need to reconnect your WiFi and Bluetooth.
If that doesn't help, try resetting/rebooting the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart in a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

Does up work with iPad 2

Got an Up for Christmas. Box says works with 4s and ipad3. Not with 2?

If this is the Jawbone Up, the according to this site, it works with the iPad 2 as long as you are running iOS 5.1 or higher.
http://jawbone.com/store/buy/up
The UP24 does not work with the iPad2 if I read this correctly.
With a little further investigation I found this.
https://jawbone.com/up/devices

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Monster iezclick does not work with iPad 3

Similar Messages

Maybe you are looking for